sh: Add support PCI host driver for SH7751/SH7751R

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

2 files changed, 200 insertions, 0 deletions

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index ef7781f899a..ad1b7ddb431 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -32,6 +32,7 @@ COBJS-y += pci_indirect.o
 COBJS-y += tsi108_pci.o
 COBJS-y += w83c553f.o
 COBJS-$(CONFIG_SH4_PCI) += pci_sh4.o
+COBJS-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
 COBJS-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
 
 COBJS	:= $(COBJS-y)
diff --git a/drivers/pci/pci_sh7751.c b/drivers/pci/pci_sh7751.c
new file mode 100644
index 00000000000..a058e1d37fc
--- /dev/null
+++ b/drivers/pci/pci_sh7751.c
@@ -0,0 +1,199 @@
+/*
+ * SH7751 PCI Controller (PCIC) for U-Boot.
+ * (C) Dustin McIntire (dustin@sensoria.com)
+ * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+
+/* Register addresses and such */
+#define SH7751_BCR1	(vu_long *)0xFF800000
+#define SH7751_BCR2	(vu_short*)0xFF800004
+#define SH7751_WCR1	(vu_long *)0xFF800008
+#define SH7751_WCR2	(vu_long *)0xFF80000C
+#define SH7751_WCR3	(vu_long *)0xFF800010
+#define SH7751_MCR	(vu_long *)0xFF800014
+#define SH7751_BCR3	(vu_short*)0xFF800050
+#define SH7751_PCICONF0 (vu_long *)0xFE200000
+#define SH7751_PCICONF1 (vu_long *)0xFE200004
+#define SH7751_PCICONF2 (vu_long *)0xFE200008
+#define SH7751_PCICONF3 (vu_long *)0xFE20000C
+#define SH7751_PCICONF4 (vu_long *)0xFE200010
+#define SH7751_PCICONF5 (vu_long *)0xFE200014
+#define SH7751_PCICONF6 (vu_long *)0xFE200018
+#define SH7751_PCICR    (vu_long *)0xFE200100
+#define SH7751_PCILSR0  (vu_long *)0xFE200104
+#define SH7751_PCILSR1  (vu_long *)0xFE200108
+#define SH7751_PCILAR0  (vu_long *)0xFE20010C
+#define SH7751_PCILAR1  (vu_long *)0xFE200110
+#define SH7751_PCIMBR   (vu_long *)0xFE2001C4
+#define SH7751_PCIIOBR  (vu_long *)0xFE2001C8
+#define SH7751_PCIPINT  (vu_long *)0xFE2001CC
+#define SH7751_PCIPINTM (vu_long *)0xFE2001D0
+#define SH7751_PCICLKR  (vu_long *)0xFE2001D4
+#define SH7751_PCIBCR1  (vu_long *)0xFE2001E0
+#define SH7751_PCIBCR2  (vu_long *)0xFE2001E4
+#define SH7751_PCIWCR1  (vu_long *)0xFE2001E8
+#define SH7751_PCIWCR2  (vu_long *)0xFE2001EC
+#define SH7751_PCIWCR3  (vu_long *)0xFE2001F0
+#define SH7751_PCIMCR   (vu_long *)0xFE2001F4
+#define SH7751_PCIBCR3  (vu_long *)0xFE2001F8
+
+#define BCR1_BREQEN				0x00080000
+#define PCI_SH7751_ID			0x35051054
+#define PCI_SH7751R_ID			0x350E1054
+#define SH7751_PCICONF1_WCC		0x00000080
+#define SH7751_PCICONF1_PER		0x00000040
+#define SH7751_PCICONF1_BUM		0x00000004
+#define SH7751_PCICONF1_MES		0x00000002
+#define SH7751_PCICONF1_CMDS	0x000000C6
+#define SH7751_PCI_HOST_BRIDGE	0x6
+#define SH7751_PCICR_PREFIX		0xa5000000
+#define SH7751_PCICR_PRST		0x00000002
+#define SH7751_PCICR_CFIN		0x00000001
+#define SH7751_PCIPINT_D3		0x00000002
+#define SH7751_PCIPINT_D0		0x00000001
+#define SH7751_PCICLKR_PREFIX   0xa5000000
+
+#define SH7751_PCI_MEM_BASE		0xFD000000
+#define SH7751_PCI_MEM_SIZE		0x01000000
+#define SH7751_PCI_IO_BASE		0xFE240000
+#define SH7751_PCI_IO_SIZE		0x00040000
+
+#define SH7751_CS3_BASE_ADDR    0x0C000000
+#define SH7751_P2CS3_BASE_ADDR  0xAC000000
+
+#define SH7751_PCIPAR   (vu_long *)0xFE2001C0
+#define SH7751_PCIPDR   (vu_long *)0xFE200220
+
+#define p4_in(addr)     *(addr)
+#define p4_out(data,addr) *(addr) = (data)
+
+/* Double word */
+int pci_sh4_read_config_dword(struct pci_controller *hose,
+			      pci_dev_t dev, int offset, u32 * value)
+{
+	u32 par_data = 0x80000000 | dev;
+
+	p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR);
+	*value = p4_in(SH7751_PCIPDR);
+
+	return 0;
+}
+
+int pci_sh4_write_config_dword(struct pci_controller *hose,
+			       pci_dev_t dev, int offset, u32 * value)
+{
+	u32 par_data = 0x80000000 | dev;
+
+	p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR);
+	p4_out(value, SH7751_PCIPDR);
+
+	return 0;
+}
+
+int pci_sh7751_init(struct pci_controller *hose)
+{
+	/* Double-check that we're a 7751 or 7751R chip */
+	if (p4_in(SH7751_PCICONF0) != PCI_SH7751_ID
+	    && p4_in(SH7751_PCICONF0) != PCI_SH7751R_ID) {
+		printf("PCI: Unknown PCI host bridge.\n");
+		return 1;
+	}
+	printf("PCI: SH7751 PCI host bridge found.\n");
+
+	/* Double-check some BSC config settings */
+	/* (Area 3 non-MPX 32-bit, PCI bus pins) */
+	if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) {
+		printf("SH7751_BCR1 0x%08X\n", p4_in(SH7751_BCR1));
+		return 2;
+	}
+	if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) {
+		printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2));
+		return 3;
+	}
+	if (p4_in(SH7751_BCR2) & 0x01) {
+		printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2));
+		return 4;
+	}
+
+	/* Force BREQEN in BCR1 to allow PCIC access */
+	p4_out((p4_in(SH7751_BCR1) | BCR1_BREQEN), SH7751_BCR1);
+
+	/* Toggle PCI reset pin */
+	p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_PRST), SH7751_PCICR);
+	udelay(32);
+	p4_out(SH7751_PCICR_PREFIX, SH7751_PCICR);
+
+	/* Set cmd bits: WCC, PER, BUM, MES */
+	/* (Addr/Data stepping, Parity enabled, Bus Master, Memory enabled) */
+	p4_out(0xfb900047, SH7751_PCICONF1);	/* K.Kino */
+
+	/* Define this host as the host bridge */
+	p4_out((SH7751_PCI_HOST_BRIDGE << 24), SH7751_PCICONF2);
+
+	/* Force PCI clock(s) on */
+	p4_out(0, SH7751_PCICLKR);
+	p4_out(0x03, SH7751_PCICLKR);
+
+	/* Clear powerdown IRQs, also mask them (unused) */
+	p4_out((SH7751_PCIPINT_D0 | SH7751_PCIPINT_D3), SH7751_PCIPINT);
+	p4_out(0, SH7751_PCIPINTM);
+
+	p4_out(0xab000001, SH7751_PCICONF4);
+
+	/* Set up target memory mappings (for external DMA access) */
+	/* Map both P0 and P2 range to Area 3 RAM for ease of use */
+	p4_out((64 - 1) << 20, SH7751_PCILSR0);
+	p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCILAR0);
+	p4_out(0, SH7751_PCILSR1);
+	p4_out(0, SH7751_PCILAR1);
+	p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCICONF5);
+	p4_out(0xd0000000, SH7751_PCICONF6);
+
+	/* Map memory window to same address on PCI bus */
+	p4_out(SH7751_PCI_MEM_BASE, SH7751_PCIMBR);
+
+	/* Map IO window to same address on PCI bus */
+	p4_out(0x2000 & 0xfffc0000, SH7751_PCIIOBR);
+
+	/* set BREQEN */
+	p4_out(inl(SH7751_BCR1) | 0x00080000, SH7751_BCR1);
+
+	/* Copy BSC registers into PCI BSC */
+	p4_out(inl(SH7751_BCR1), SH7751_PCIBCR1);
+	p4_out(inl(SH7751_BCR2), SH7751_PCIBCR2);
+	p4_out(inl(SH7751_BCR3), SH7751_PCIBCR3);
+	p4_out(inl(SH7751_WCR1), SH7751_PCIWCR1);
+	p4_out(inl(SH7751_WCR2), SH7751_PCIWCR2);
+	p4_out(inl(SH7751_WCR3), SH7751_PCIWCR3);
+	p4_out(inl(SH7751_MCR), SH7751_PCIMCR);
+
+	/* Finally, set central function init complete */
+	p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN), SH7751_PCICR);
+
+	pci_sh4_init(hose);
+
+	return 0;
+}