diff options
| author | Chris Morgan | 2022-05-27 13:18:20 -0500 |
|---|---|---|
| committer | Kever Yang | 2022-06-29 11:42:10 +0800 |
| commit | 30975fb73d51f65d95e9508e4af9c85badd5388c (patch) | |
| tree | 4d2325fd71c45dd00d82c50d8fcb3f007f783ca5 /drivers/power | |
| parent | ad607512f5757f4485968efd5bcf2c0245a8a235 (diff) | |
rockchip: Add option to prevent booting on power plug-in
For Rockchip boards with the all rk8xx series PMICs (excluding the
rk808), it is sometimes desirable to not boot whenever the device is
plugged in. An example would be for the Odroid Go Advance.
This provides a configurable option to check the PMIC says it was
powered because of a plug-in event. If the value is 1 and this option
is selected, the device shuts down shortly after printing a message
to console stating the reason why it's shutting down. Powering up the
board with the power button is not affected.
This patch parallels the work done in the following patch series:
https://lore.kernel.org/u-boot/20220121133732.2397273-1-andre.przywara@arm.com/
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/pmic/rk8xx.c | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/drivers/power/pmic/rk8xx.c b/drivers/power/pmic/rk8xx.c index 1ffbecc02a3..25ef621f8df 100644 --- a/drivers/power/pmic/rk8xx.c +++ b/drivers/power/pmic/rk8xx.c @@ -51,6 +51,38 @@ U_BOOT_DRIVER(rk8xx_sysreset) = { .ops = &rk8xx_sysreset_ops, }; +/* In the event of a plug-in and the appropriate option has been + * selected, we simply shutdown instead of continue the normal boot + * process. Please note the rk808 is not supported as it doesn't + * have the appropriate register. + */ +void rk8xx_off_for_plugin(struct udevice *dev) +{ + struct rk8xx_priv *priv = dev_get_priv(dev); + + switch (priv->variant) { + case RK805_ID: + case RK816_ID: + case RK818_ID: + if (pmic_reg_read(dev, RK8XX_ON_SOURCE) & RK8XX_ON_PLUG_IN) { + printf("Power Off due to plug-in event\n"); + pmic_clrsetbits(dev, REG_DEVCTRL, 0, BIT(0)); + } + break; + case RK809_ID: + case RK817_ID: + if (pmic_reg_read(dev, RK817_ON_SOURCE) & RK8XX_ON_PLUG_IN) { + printf("Power Off due to plug-in event\n"); + pmic_clrsetbits(dev, RK817_REG_SYS_CFG3, 0, + BIT(0)); + } + break; + default: + printf("PMIC RK%x: Cannot read boot reason.\n", + priv->variant); + } +} + static struct reg_data rk817_init_reg[] = { /* enable the under-voltage protection, * the under-voltage protection will shutdown the LDO3 and reset the PMIC @@ -211,6 +243,8 @@ static int rk8xx_probe(struct udevice *dev) pmic_reg_read(dev, on_source), pmic_reg_read(dev, off_source)); printf("\n"); + if (CONFIG_IS_ENABLED(ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON)) + rk8xx_off_for_plugin(dev); return 0; } |