miiphy: convert to linux/mii.h

The include/miiphy.h header duplicates a lot of things from linux/mii.h.
So punt all the things that overlap to keep the API simple and to make
merging between U-Boot and Linux simpler.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

2 files changed, 34 insertions, 52 deletions

diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 35f2368a808..465a497136c 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -242,7 +242,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info)
 	advertise = mii_info->advertising;
 
 	/* Setup standard advertisement */
-	adv = phy_read (mii_info, PHY_ANAR);
+	adv = phy_read (mii_info, MII_ADVERTISE);
 	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 	if (advertise & ADVERTISED_10baseT_Half)
 		adv |= ADVERTISE_10HALF;
@@ -252,7 +252,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info)
 		adv |= ADVERTISE_100HALF;
 	if (advertise & ADVERTISED_100baseT_Full)
 		adv |= ADVERTISE_100FULL;
-	phy_write (mii_info, PHY_ANAR, adv);
+	phy_write (mii_info, MII_ADVERTISE, adv);
 }
 
 static void genmii_setup_forced (struct uec_mii_info *mii_info)
@@ -260,24 +260,24 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info)
 	u16 ctrl;
 	u32 features = mii_info->phyinfo->features;
 
-	ctrl = phy_read (mii_info, PHY_BMCR);
+	ctrl = phy_read (mii_info, MII_BMCR);
 
-	ctrl &= ~(PHY_BMCR_DPLX | PHY_BMCR_100_MBPS |
-		  PHY_BMCR_1000_MBPS | PHY_BMCR_AUTON);
-	ctrl |= PHY_BMCR_RESET;
+	ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 |
+		  BMCR_SPEED1000 | BMCR_ANENABLE);
+	ctrl |= BMCR_RESET;
 
 	switch (mii_info->speed) {
 	case SPEED_1000:
 		if (features & (SUPPORTED_1000baseT_Half
 				| SUPPORTED_1000baseT_Full)) {
-			ctrl |= PHY_BMCR_1000_MBPS;
+			ctrl |= BMCR_SPEED1000;
 			break;
 		}
 		mii_info->speed = SPEED_100;
 	case SPEED_100:
 		if (features & (SUPPORTED_100baseT_Half
 				| SUPPORTED_100baseT_Full)) {
-			ctrl |= PHY_BMCR_100_MBPS;
+			ctrl |= BMCR_SPEED100;
 			break;
 		}
 		mii_info->speed = SPEED_10;
@@ -290,7 +290,7 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info)
 		break;
 	}
 
-	phy_write (mii_info, PHY_BMCR, ctrl);
+	phy_write (mii_info, MII_BMCR, ctrl);
 }
 
 /* Enable and Restart Autonegotiation */
@@ -298,9 +298,9 @@ static void genmii_restart_aneg (struct uec_mii_info *mii_info)
 {
 	u16 ctl;
 
-	ctl = phy_read (mii_info, PHY_BMCR);
-	ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-	phy_write (mii_info, PHY_BMCR, ctl);
+	ctl = phy_read (mii_info, MII_BMCR);
+	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+	phy_write (mii_info, MII_BMCR, ctl);
 }
 
 static int gbit_config_aneg (struct uec_mii_info *mii_info)
@@ -335,7 +335,7 @@ static int marvell_config_aneg (struct uec_mii_info *mii_info)
 	/* The Marvell PHY has an errata which requires
 	 * that certain registers get written in order
 	 * to restart autonegotiation */
-	phy_write (mii_info, PHY_BMCR, PHY_BMCR_RESET);
+	phy_write (mii_info, MII_BMCR, BMCR_RESET);
 
 	phy_write (mii_info, 0x1d, 0x1f);
 	phy_write (mii_info, 0x1e, 0x200c);
@@ -373,18 +373,18 @@ static int genmii_update_link (struct uec_mii_info *mii_info)
 	u16 status;
 
 	/* Status is read once to clear old link state */
-	phy_read (mii_info, PHY_BMSR);
+	phy_read (mii_info, MII_BMSR);
 
 	/*
 	 * Wait if the link is up, and autonegotiation is in progress
 	 * (ie - we're capable and it's not done)
 	 */
-	status = phy_read(mii_info, PHY_BMSR);
-	if ((status & PHY_BMSR_LS) && (status & PHY_BMSR_AUTN_ABLE)
-	    && !(status & PHY_BMSR_AUTN_COMP)) {
+	status = phy_read(mii_info, MII_BMSR);
+	if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE)
+	    && !(status & BMSR_ANEGCOMPLETE)) {
 		int i = 0;
 
-		while (!(status & PHY_BMSR_AUTN_COMP)) {
+		while (!(status & BMSR_ANEGCOMPLETE)) {
 			/*
 			 * Timeout reached ?
 			 */
@@ -395,11 +395,11 @@ static int genmii_update_link (struct uec_mii_info *mii_info)
 
 			i++;
 			udelay(1000);	/* 1 ms */
-			status = phy_read(mii_info, PHY_BMSR);
+			status = phy_read(mii_info, MII_BMSR);
 		}
 		mii_info->link = 1;
 	} else {
-		if (status & PHY_BMSR_LS)
+		if (status & BMSR_LSTATUS)
 			mii_info->link = 1;
 		else
 			mii_info->link = 0;
@@ -429,13 +429,13 @@ static int genmii_read_status (struct uec_mii_info *mii_info)
 			else
 				mii_info->duplex = DUPLEX_HALF;
 		} else {
-			status = phy_read(mii_info, PHY_ANLPAR);
+			status = phy_read(mii_info, MII_LPA);
 
-			if (status & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+			if (status & (LPA_10FULL | LPA_100FULL))
 				mii_info->duplex = DUPLEX_FULL;
 			else
 				mii_info->duplex = DUPLEX_HALF;
-			if (status & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX))
+			if (status & (LPA_100FULL | LPA_100HALF))
 				mii_info->speed = SPEED_100;
 			else
 				mii_info->speed = SPEED_10;
@@ -463,8 +463,8 @@ static int bcm_init(struct uec_mii_info *mii_info)
 
 		/* Wait for aneg to complete. */
 		do
-			val = phy_read(mii_info, PHY_BMSR);
-		while (--cnt && !(val & PHY_BMSR_AUTN_COMP));
+			val = phy_read(mii_info, MII_BMSR);
+		while (--cnt && !(val & BMSR_ANEGCOMPLETE));
 
 		/* Set RDX clk delay. */
 		phy_write(mii_info, 0x18, 0x7 | (7 << 12));
@@ -511,7 +511,7 @@ static int marvell_init(struct uec_mii_info *mii_info)
 		temp |= MII_M1111_HWCFG_MODE_RGMII;
 		phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
 
-		phy_write(mii_info, PHY_BMCR, PHY_BMCR_RESET);
+		phy_write(mii_info, MII_BMCR, BMCR_RESET);
 	}
 
 	return 0;
@@ -582,11 +582,11 @@ static int marvell_config_intr (struct uec_mii_info *mii_info)
 static int dm9161_init (struct uec_mii_info *mii_info)
 {
 	/* Reset the PHY */
-	phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) |
-		   PHY_BMCR_RESET);
+	phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) |
+		   BMCR_RESET);
 	/* PHY and MAC connect */
-	phy_write (mii_info, PHY_BMCR, phy_read (mii_info, PHY_BMCR) &
-		   ~PHY_BMCR_ISO);
+	phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) &
+		   ~BMCR_ISOLATE);
 
 	phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
 
@@ -825,11 +825,11 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
 	struct phy_info *theInfo = NULL;
 
 	/* Grab the bits from PHYIR1, and put them in the upper half */
-	phy_reg = phy_read (mii_info, PHY_PHYIDR1);
+	phy_reg = phy_read (mii_info, MII_PHYSID1);
 	phy_ID = (phy_reg & 0xffff) << 16;
 
 	/* Grab the bits from PHYIR2, and put them in the lower half */
-	phy_reg = phy_read (mii_info, PHY_PHYIDR2);
+	phy_reg = phy_read (mii_info, MII_PHYSID2);
 	phy_ID |= (phy_reg & 0xffff);
 
 	/* loop through all the known PHY types, and find one that */
@@ -900,8 +900,8 @@ void marvell_phy_interface_mode (struct eth_device *dev,
 
 	/* handle 88e1111 rev.B2 erratum 5.6 */
 	if (mii_info->autoneg) {
-		status = phy_read (mii_info, PHY_BMCR);
-		phy_write (mii_info, PHY_BMCR, status | PHY_BMCR_AUTON);
+		status = phy_read (mii_info, MII_BMCR);
+		phy_write (mii_info, MII_BMCR, status | BMCR_ANENABLE);
 	}
 	/* now the B2 will correctly report autoneg completion status */
 }
diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
index 7ac1ff93295..929d9bdd7dc 100644
--- a/drivers/qe/uec_phy.h
+++ b/drivers/qe/uec_phy.h
@@ -169,24 +169,6 @@
 #define ADVERTISED_BNC			(1 << 11)
 #define ADVERTISED_10000baseT_Full	(1 << 12)
 
-/* Advertisement control register. */
-#define ADVERTISE_SLCT		0x001f	/* Selector bits	       */
-#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
-#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
-#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
-#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
-#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
-#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
-#define ADVERTISE_RESV		0x1c00	/* Unused...		       */
-#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
-#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
-#define ADVERTISE_NPAGE		0x8000	/* Next page bit	       */
-
-#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
-			ADVERTISE_CSMA)
-#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
-		       ADVERTISE_100HALF | ADVERTISE_100FULL)
-
 /* Taken from mii_if_info and sungem_phy.h */
 struct uec_mii_info {
 	/* Information about the PHY type */