SAMSUNG: serial: modify name from s5pc1xx to s5p

Because of other s5p series SoC will use these serial functions,
modify function's name and structure's name.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

1 files changed, 206 insertions, 0 deletions

diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
new file mode 100644
index 00000000000..9747db37219
--- /dev/null
+++ b/drivers/serial/serial_s5p.c
@@ -0,0 +1,206 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ *
+ * based on drivers/serial/s3c64xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/clk.h>
+#include <serial.h>
+
+static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
+{
+	u32 offset = dev_index * sizeof(struct s5p_uart);
+
+	if (cpu_is_s5pc100())
+		return (struct s5p_uart *)(S5PC100_UART_BASE + offset);
+	else
+		return (struct s5p_uart *)(S5PC110_UART_BASE + offset);
+}
+
+/*
+ * The coefficient, used to calculate the baudrate on S5P UARTs is
+ * calculated as
+ * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
+ * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
+ * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
+ */
+static const int udivslot[] = {
+	0,
+	0x0080,
+	0x0808,
+	0x0888,
+	0x2222,
+	0x4924,
+	0x4a52,
+	0x54aa,
+	0x5555,
+	0xd555,
+	0xd5d5,
+	0xddd5,
+	0xdddd,
+	0xdfdd,
+	0xdfdf,
+	0xffdf,
+};
+
+void serial_setbrg_dev(const int dev_index)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+	u32 pclk = get_pclk();
+	u32 baudrate = gd->baudrate;
+	u32 val;
+
+	val = pclk / baudrate;
+
+	writel(val / 16 - 1, &uart->ubrdiv);
+	writew(udivslot[val % 16], &uart->udivslot);
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+int serial_init_dev(const int dev_index)
+{
+	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+
+	/* reset and enable FIFOs, set triggers to the maximum */
+	writel(0, &uart->ufcon);
+	writel(0, &uart->umcon);
+	/* 8N1 */
+	writel(0x3, &uart->ulcon);
+	/* No interrupts, no DMA, pure polling */
+	writel(0x245, &uart->ucon);
+
+	serial_setbrg_dev(dev_index);
+
+	return 0;
+}
+
+static int serial_err_check(const int dev_index, int op)
+{
+	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+	unsigned int mask;
+
+	/*
+	 * UERSTAT
+	 * Break Detect	[3]
+	 * Frame Err	[2] : receive operation
+	 * Parity Err	[1] : receive operation
+	 * Overrun Err	[0] : receive operation
+	 */
+	if (op)
+		mask = 0x8;
+	else
+		mask = 0xf;
+
+	return readl(&uart->uerstat) & mask;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc_dev(const int dev_index)
+{
+	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+
+	/* wait for character to arrive */
+	while (!(readl(&uart->utrstat) & 0x1)) {
+		if (serial_err_check(dev_index, 0))
+			return 0;
+	}
+
+	return (int)(readl(&uart->urxh) & 0xff);
+}
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc_dev(const char c, const int dev_index)
+{
+	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+
+	/* wait for room in the tx FIFO */
+	while (!(readl(&uart->utrstat) & 0x2)) {
+		if (serial_err_check(dev_index, 1))
+			return;
+	}
+
+	writel(c, &uart->utxh);
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc_dev(const int dev_index)
+{
+	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+
+	return (int)(readl(&uart->utrstat) & 0x1);
+}
+
+void serial_puts_dev(const char *s, const int dev_index)
+{
+	while (*s)
+		serial_putc_dev(*s++, dev_index);
+}
+
+/* Multi serial device functions */
+#define DECLARE_S5P_SERIAL_FUNCTIONS(port) \
+int s5p_serial##port##_init(void) { return serial_init_dev(port); } \
+void s5p_serial##port##_setbrg(void) { serial_setbrg_dev(port); } \
+int s5p_serial##port##_getc(void) { return serial_getc_dev(port); } \
+int s5p_serial##port##_tstc(void) { return serial_tstc_dev(port); } \
+void s5p_serial##port##_putc(const char c) { serial_putc_dev(c, port); } \
+void s5p_serial##port##_puts(const char *s) { serial_puts_dev(s, port); }
+
+#define INIT_S5P_SERIAL_STRUCTURE(port, name, bus) { \
+	name, \
+	bus, \
+	s5p_serial##port##_init, \
+	NULL, \
+	s5p_serial##port##_setbrg, \
+	s5p_serial##port##_getc, \
+	s5p_serial##port##_tstc, \
+	s5p_serial##port##_putc, \
+	s5p_serial##port##_puts, }
+
+DECLARE_S5P_SERIAL_FUNCTIONS(0);
+struct serial_device s5p_serial0_device =
+	INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0", "S5PUART0");
+DECLARE_S5P_SERIAL_FUNCTIONS(1);
+struct serial_device s5p_serial1_device =
+	INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1", "S5PUART1");
+DECLARE_S5P_SERIAL_FUNCTIONS(2);
+struct serial_device s5p_serial2_device =
+	INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2", "S5PUART2");
+DECLARE_S5P_SERIAL_FUNCTIONS(3);
+struct serial_device s5p_serial3_device =
+	INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3", "S5PUART3");