diff options
| author | Stefano Babic | 2011-11-22 15:22:39 +0100 |
|---|---|---|
| committer | Albert ARIBAUD | 2011-12-06 23:59:40 +0100 |
| commit | 40f6fffee5917930597bfcc07de1cd879d4994f6 (patch) | |
| tree | 8fa1dd2379bec957002eb54d00af770ed1be3e60 /drivers/serial | |
| parent | 5a42cd33d5600e90245fe4fa979d888753b081de (diff) | |
MX: serial_mxc: cleanup removing nasty #ifdef
The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port>
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Helmut Raiger <helmut.raiger@hale.at>
CC: John Rigby <jcrigby@gmail.com>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/serial_mxc.c | 37 |
1 files changed, 4 insertions, 33 deletions
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index dcb4bd16d81..af00b9c0ec4 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -24,41 +24,12 @@ #define __REG(x) (*((volatile u32 *)(x))) -#if defined(CONFIG_SYS_MX31_UART1) || defined(CONFIG_SYS_MX25_UART1) -#define UART_PHYS 0x43f90000 -#elif defined(CONFIG_SYS_MX31_UART2) || defined(CONFIG_SYS_MX25_UART2) -#define UART_PHYS 0x43f94000 -#elif defined(CONFIG_SYS_MX31_UART3) || defined(CONFIG_SYS_MX25_UART3) -#define UART_PHYS 0x5000c000 -#elif defined(CONFIG_SYS_MX31_UART4) || defined(CONFIG_SYS_MX25_UART4) -#define UART_PHYS 0x43fb0000 -#elif defined(CONFIG_SYS_MX31_UART5) || defined(CONFIG_SYS_MX25_UART5) -#define UART_PHYS 0x43fb4000 -#elif defined(CONFIG_SYS_MX27_UART1) -#define UART_PHYS 0x1000a000 -#elif defined(CONFIG_SYS_MX27_UART2) -#define UART_PHYS 0x1000b000 -#elif defined(CONFIG_SYS_MX27_UART3) -#define UART_PHYS 0x1000c000 -#elif defined(CONFIG_SYS_MX27_UART4) -#define UART_PHYS 0x1000d000 -#elif defined(CONFIG_SYS_MX27_UART5) -#define UART_PHYS 0x1001b000 -#elif defined(CONFIG_SYS_MX27_UART6) -#define UART_PHYS 0x1001c000 -#elif defined(CONFIG_SYS_MX35_UART1) || defined(CONFIG_SYS_MX51_UART1) || \ - defined(CONFIG_SYS_MX53_UART1) -#define UART_PHYS UART1_BASE_ADDR -#elif defined(CONFIG_SYS_MX35_UART2) || defined(CONFIG_SYS_MX51_UART2) || \ - defined(CONFIG_SYS_MX53_UART2) -#define UART_PHYS UART2_BASE_ADDR -#elif defined(CONFIG_SYS_MX35_UART3) || defined(CONFIG_SYS_MX51_UART3) || \ - defined(CONFIG_SYS_MX53_UART3) -#define UART_PHYS UART3_BASE_ADDR -#else -#error "define CONFIG_SYS_MXxx_UARTx to use the MXC UART driver" +#ifndef CONFIG_MXC_UART_BASE +#error "define CONFIG_MXC_UART_BASE to use the MXC UART driver" #endif +#define UART_PHYS CONFIG_MXC_UART_BASE + #ifdef CONFIG_SERIAL_MULTI #warning "MXC driver does not support MULTI serials." #endif |