arm: Remove support for NETARM

This stuff has been rotting in the tree for a while now. Remove it.

Signed-off-by: Marek Vasut <marex@denx.de>

3 files changed, 0 insertions, 207 deletions

diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 8151d2e0f41..b6d20f84465 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -45,7 +45,6 @@ COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o
 COBJS-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o
 COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
 COBJS-$(CONFIG_MXC_UART) += serial_mxc.o
-COBJS-$(CONFIG_NETARM_SERIAL) += serial_netarm.o
 COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
 COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
 COBJS-$(CONFIG_PXA_SERIAL) += serial_pxa.o
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 44bb089dee9..f5f43a6ddc0 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -105,7 +105,6 @@ serial_initfunc(ks8695_serial_initialize);
 serial_initfunc(lh7a40x_serial_initialize);
 serial_initfunc(max3100_serial_initialize);
 serial_initfunc(mxc_serial_initialize);
-serial_initfunc(netarm_serial_initialize);
 serial_initfunc(pl01x_serial_initialize);
 serial_initfunc(s3c44b0_serial_initialize);
 serial_initfunc(sa1100_serial_initialize);
@@ -201,7 +200,6 @@ void serial_initialize(void)
 	lh7a40x_serial_initialize();
 	max3100_serial_initialize();
 	mxc_serial_initialize();
-	netarm_serial_initialize();
 	pl01x_serial_initialize();
 	s3c44b0_serial_initialize();
 	sa1100_serial_initialize();
diff --git a/drivers/serial/serial_netarm.c b/drivers/serial/serial_netarm.c
deleted file mode 100644
index 44d7c500c79..00000000000
--- a/drivers/serial/serial_netarm.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Serial Port stuff - taken from Linux
- *
- * (C) Copyright 2002
- * MAZeT GmbH <www.mazet.de>
- * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
- *
- * (c) 2004
- * IMMS gGmbH <www.imms.de>
- * Thomas Elste <info@elste.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PORTA	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA))
-#if !defined(CONFIG_NETARM_NS7520)
-#define PORTB	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB))
-#else
-#define PORTC	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTC))
-#endif
-
-/* wait until transmitter is ready for another character */
-#define TXWAITRDY(registers)							\
-{										\
-	ulong tmo = get_timer(0) + 1 * CONFIG_SYS_HZ;					\
-	while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 )	{	\
-		if (get_timer(0) > tmo)						\
-			break;							\
-	}									\
-}
-
-
-volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0);
-volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1);
-
-extern void _netarm_led_FAIL1(void);
-
-/*
- * Setup both serial i/f with given baudrate
- */
-static void netarm_serial_setbrg(void)
-{
-	/* set 0 ... make sure pins are configured for serial */
-#if !defined(CONFIG_NETARM_NS7520)
-	PORTA = PORTB =
-		NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
-#else
-	PORTA = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
-	PORTC = NETARM_GEN_PORT_CSF (0xef) | NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
-#endif
-
-	/* first turn em off */
-	serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0;
-
-	/* clear match register, we don't need it */
-	serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0;
-
-	/* setup bit rate generator and rx buffer gap timer (1 byte only) */
-	if ((gd->baudrate >= MIN_BAUD_RATE)
-	    && (gd->baudrate <= MAX_BAUD_RATE)) {
-		serial_reg_ch1->bitrate = serial_reg_ch2->bitrate =
-			NETARM_SER_BR_X16 (gd->baudrate);
-		serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer =
-			0;
-		serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer =
-			NETARM_SER_RXGAP (gd->baudrate);
-	} else {
-		hang ();
-	}
-
-	/* setup port mode */
-	serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b =
-		( NETARM_SER_CTLB_RCGT_EN |
-		  NETARM_SER_CTLB_UART_MODE);
-	serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a =
-		( NETARM_SER_CTLA_ENABLE |
-		  NETARM_SER_CTLA_P_NONE |
-		  /* see errata */
-		  NETARM_SER_CTLA_2STOP |
-		  NETARM_SER_CTLA_8BITS |
-		  NETARM_SER_CTLA_DTR_EN |
-		  NETARM_SER_CTLA_RTS_EN);
-}
-
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- */
-static int netarm_serial_init(void)
-{
-	serial_setbrg ();
-	return 0;
-}
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void netarm_serial_putc(const char c)
-{
-	volatile unsigned char *fifo;
-
-	/* If \n, also do \r */
-	if (c == '\n')
-		serial_putc ('\r');
-
-	fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo);
-	TXWAITRDY (serial_reg_ch1);
-	*fifo = c;
-}
-
-/*
- * Test of a single byte from the serial port. Returns 1 on success, 0
- * otherwise.
- */
-static int netarm_serial_tstc(void)
-{
-	return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY;
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise.
- */
-static int netarm_serial_getc(void)
-{
-	unsigned int ch_uint;
-	volatile unsigned int *fifo;
-	volatile unsigned char *fifo_char = NULL;
-	int buf_count = 0;
-
-	while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY))
-		/* NOP */ ;
-
-	fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo);
-	fifo_char = (unsigned char *) &ch_uint;
-	ch_uint = *fifo;
-
-	buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a);
-	switch (buf_count) {
-	case NETARM_SER_STATA_RXFDB_4BYTES:
-		buf_count = 4;
-		break;
-	case NETARM_SER_STATA_RXFDB_3BYTES:
-		buf_count = 3;
-		break;
-	case NETARM_SER_STATA_RXFDB_2BYTES:
-		buf_count = 2;
-		break;
-	case NETARM_SER_STATA_RXFDB_1BYTES:
-		buf_count = 1;
-		break;
-	default:
-		/* panic, be never here */
-		break;
-	}
-
-	serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED;
-
-	return ch_uint & 0xff;
-}
-
-static struct serial_device netarm_serial_drv = {
-	.name	= "netarm_serial",
-	.start	= netarm_serial_init,
-	.stop	= NULL,
-	.setbrg	= netarm_serial_setbrg,
-	.putc	= netarm_serial_putc,
-	.puts	= default_serial_puts,
-	.getc	= netarm_serial_getc,
-	.tstc	= netarm_serial_tstc,
-};
-
-void netarm_serial_initialize(void)
-{
-	serial_register(&netarm_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &netarm_serial_drv;
-}