Sound: MAX98095: Add the driver for codec

This patch adds the driver for codec MAX98095 required by Snow
Board

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

3 files changed, 862 insertions, 0 deletions

diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
index 8fdffb10eff..1987ca1a05b 100644
--- a/drivers/sound/Makefile
+++ b/drivers/sound/Makefile
@@ -28,6 +28,7 @@ LIB	:= $(obj)libsound.o
 COBJS-$(CONFIG_SOUND)	+= sound.o
 COBJS-$(CONFIG_I2S)	+= samsung-i2s.o
 COBJS-$(CONFIG_SOUND_WM8994)	+= wm8994.o
+COBJS-$(CONFIG_SOUND_MAX98095)	+= max98095.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/sound/max98095.c b/drivers/sound/max98095.c
new file mode 100644
index 00000000000..d69db58dcd2
--- /dev/null
+++ b/drivers/sound/max98095.c
@@ -0,0 +1,550 @@
+/*
+ * max98095.c -- MAX98095 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ * Modified for uboot by R. Chandrasekar (rcsekar@samsung.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include <div64.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <sound.h>
+#include "i2s.h"
+#include "max98095.h"
+
+enum max98095_type {
+	MAX98095,
+};
+
+struct max98095_priv {
+	enum max98095_type devtype;
+	unsigned int sysclk;
+	unsigned int rate;
+	unsigned int fmt;
+};
+
+static struct sound_codec_info g_codec_info;
+struct max98095_priv g_max98095_info;
+unsigned int g_max98095_i2c_dev_addr;
+
+/* Index 0 is reserved. */
+int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000,
+		88200, 96000};
+
+/*
+ * Writes value to a device register through i2c
+ *
+ * @param reg	reg number to be write
+ * @param data	data to be writen to the above registor
+ *
+ * @return	int value 1 for change, 0 for no change or negative error code.
+ */
+static int max98095_i2c_write(unsigned int reg, unsigned char data)
+{
+	debug("%s: Write Addr : 0x%02X, Data :  0x%02X\n",
+		__func__, reg, data);
+	return i2c_write(g_max98095_i2c_dev_addr, reg, 1, &data, 1);
+}
+
+/*
+ * Read a value from a device register through i2c
+ *
+ * @param reg	reg number to be read
+ * @param data	address of read data to be stored
+ *
+ * @return	int value 0 for success, -1 in case of error.
+ */
+static unsigned int max98095_i2c_read(unsigned int reg, unsigned char *data)
+{
+	int ret;
+
+	ret = i2c_read(g_max98095_i2c_dev_addr, reg, 1, data, 1);
+	if (ret != 0) {
+		debug("%s: Error while reading register %#04x\n",
+			__func__, reg);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * update device register bits through i2c
+ *
+ * @param reg	codec register
+ * @param mask	register mask
+ * @param value	new value
+ *
+ * @return int value 0 for success, non-zero error code.
+ */
+static int max98095_update_bits(unsigned int reg, unsigned char mask,
+				unsigned char value)
+{
+	int change, ret = 0;
+	unsigned char old, new;
+
+	if (max98095_i2c_read(reg, &old) != 0)
+		return -1;
+	new = (old & ~mask) | (value & mask);
+	change  = (old != new) ? 1 : 0;
+	if (change)
+		ret = max98095_i2c_write(reg, new);
+	if (ret < 0)
+		return ret;
+
+	return change;
+}
+
+/*
+ * codec mclk clock divider coefficients based on sampling rate
+ *
+ * @param rate sampling rate
+ * @param value address of indexvalue to be stored
+ *
+ * @return	0 for success or negative error code.
+ */
+static int rate_value(int rate, u8 *value)
+{
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
+		if (rate_table[i] >= rate) {
+			*value = i;
+			return 0;
+		}
+	}
+	*value = 1;
+
+	return -1;
+}
+
+/*
+ * Sets hw params for max98095
+ *
+ * @param max98095	max98095 information pointer
+ * @param rate		Sampling rate
+ * @param bits_per_sample	Bits per sample
+ *
+ * @return -1 for error  and 0  Success.
+ */
+static int max98095_hw_params(struct max98095_priv *max98095,
+		unsigned int rate, unsigned int bits_per_sample)
+{
+	u8 regval;
+	int error;
+
+	switch (bits_per_sample) {
+	case 16:
+		error = max98095_update_bits(M98095_034_DAI2_FORMAT,
+			M98095_DAI_WS, 0);
+		break;
+	case 24:
+		error = max98095_update_bits(M98095_034_DAI2_FORMAT,
+			M98095_DAI_WS, M98095_DAI_WS);
+		break;
+	default:
+		debug("%s: Illegal bits per sample %d.\n",
+			__func__, bits_per_sample);
+		return -1;
+	}
+
+	if (rate_value(rate, &regval)) {
+		debug("%s: Failed to set sample rate to %d.\n",
+			__func__, rate);
+		return -1;
+	}
+	max98095->rate = rate;
+
+	error |= max98095_update_bits(M98095_031_DAI2_CLKMODE,
+		M98095_CLKMODE_MASK, regval);
+
+	/* Update sample rate mode */
+	if (rate < 50000)
+		error |= max98095_update_bits(M98095_038_DAI2_FILTERS,
+			M98095_DAI_DHF, 0);
+	else
+		error |= max98095_update_bits(M98095_038_DAI2_FILTERS,
+			M98095_DAI_DHF, M98095_DAI_DHF);
+
+	if (error < 0) {
+		debug("%s: Error setting hardware params.\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Configures Audio interface system clock for the given frequency
+ *
+ * @param max98095	max98095 information
+ * @param freq		Sampling frequency in Hz
+ *
+ * @return -1 for error and 0 success.
+ */
+static int max98095_set_sysclk(struct max98095_priv *max98095,
+				unsigned int freq)
+{
+	int error = 0;
+
+	/* Requested clock frequency is already setup */
+	if (freq == max98095->sysclk)
+		return 0;
+
+	/* Setup clocks for slave mode, and using the PLL
+	 * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
+	 *	0x02 (when master clk is 20MHz to 40MHz)..
+	 *	0x03 (when master clk is 40MHz to 60MHz)..
+	 */
+	if ((freq >= 10000000) && (freq < 20000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x10);
+	} else if ((freq >= 20000000) && (freq < 40000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x20);
+	} else if ((freq >= 40000000) && (freq < 60000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x30);
+	} else {
+		debug("%s: Invalid master clock frequency\n", __func__);
+		return -1;
+	}
+
+	debug("%s: Clock at %uHz\n", __func__, freq);
+
+	if (error < 0)
+		return -1;
+
+	max98095->sysclk = freq;
+	return 0;
+}
+
+/*
+ * Sets Max98095 I2S format
+ *
+ * @param max98095	max98095 information
+ * @param fmt		i2S format - supports a subset of the options defined
+ *			in i2s.h.
+ *
+ * @return -1 for error and 0  Success.
+ */
+static int max98095_set_fmt(struct max98095_priv *max98095, int fmt)
+{
+	u8 regval = 0;
+	int error = 0;
+
+	if (fmt == max98095->fmt)
+		return 0;
+
+	max98095->fmt = fmt;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Slave mode PLL */
+		error |= max98095_i2c_write(M98095_032_DAI2_CLKCFG_HI,
+					0x80);
+		error |= max98095_i2c_write(M98095_033_DAI2_CLKCFG_LO,
+					0x00);
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* Set to master mode */
+		regval |= M98095_DAI_MAS;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+	case SND_SOC_DAIFMT_CBM_CFS:
+	default:
+		debug("%s: Clock mode unsupported\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		regval |= M98095_DAI_DLY;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		break;
+	default:
+		debug("%s: Unrecognized format.\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		regval |= M98095_DAI_WCI;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		regval |= M98095_DAI_BCI;
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		regval |= M98095_DAI_BCI | M98095_DAI_WCI;
+		break;
+	default:
+		debug("%s: Unrecognized inversion settings.\n", __func__);
+		return -1;
+	}
+
+	error |= max98095_update_bits(M98095_034_DAI2_FORMAT,
+		M98095_DAI_MAS | M98095_DAI_DLY | M98095_DAI_BCI |
+		M98095_DAI_WCI, regval);
+
+	error |= max98095_i2c_write(M98095_035_DAI2_CLOCK,
+		M98095_DAI_BSEL64);
+
+	if (error < 0) {
+		debug("%s: Error setting i2s format.\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * resets the audio codec
+ *
+ * @return -1 for error and 0 success.
+ */
+static int max98095_reset(void)
+{
+	int i, ret;
+
+	/*
+	 * Gracefully reset the DSP core and the codec hardware in a proper
+	 * sequence.
+	 */
+	ret = max98095_i2c_write(M98095_00F_HOST_CFG, 0);
+	if (ret != 0) {
+		debug("%s: Failed to reset DSP: %d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = max98095_i2c_write(M98095_097_PWR_SYS, 0);
+	if (ret != 0) {
+		debug("%s: Failed to reset codec: %d\n", __func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Reset to hardware default for registers, as there is not a soft
+	 * reset hardware control register.
+	 */
+	for (i = M98095_010_HOST_INT_CFG; i < M98095_REG_MAX_CACHED; i++) {
+		ret = max98095_i2c_write(i, 0);
+		if (ret < 0) {
+			debug("%s: Failed to reset: %d\n", __func__, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Intialise max98095 codec device
+ *
+ * @param max98095	max98095 information
+ *
+ * @returns -1 for error  and 0 Success.
+ */
+static int max98095_device_init(struct max98095_priv *max98095)
+{
+	unsigned char id;
+	int error = 0;
+
+	/* reset the codec, the DSP core, and disable all interrupts */
+	error = max98095_reset();
+	if (error != 0) {
+		debug("Reset\n");
+		return error;
+	}
+
+	/* initialize private data */
+	max98095->sysclk = -1U;
+	max98095->rate = -1U;
+	max98095->fmt = -1U;
+
+	error = max98095_i2c_read(M98095_0FF_REV_ID, &id);
+	if (error < 0) {
+		debug("%s: Failure reading hardware revision: %d\n",
+			__func__, id);
+		goto err_access;
+	}
+	debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A');
+
+	error |= max98095_i2c_write(M98095_097_PWR_SYS, M98095_PWRSV);
+
+	/*
+	 * initialize registers to hardware default configuring audio
+	 * interface2 to DAC
+	 */
+	error |= max98095_i2c_write(M98095_048_MIX_DAC_LR,
+		M98095_DAI2M_TO_DACL|M98095_DAI2M_TO_DACR);
+
+	error |= max98095_i2c_write(M98095_092_PWR_EN_OUT,
+			M98095_SPK_SPREADSPECTRUM);
+	error |= max98095_i2c_write(M98095_045_CFG_DSP, M98095_DSPNORMAL);
+	error |= max98095_i2c_write(M98095_04E_CFG_HP, M98095_HPNORMAL);
+
+	error |= max98095_i2c_write(M98095_02C_DAI1_IOCFG,
+			M98095_S1NORMAL|M98095_SDATA);
+
+	error |= max98095_i2c_write(M98095_036_DAI2_IOCFG,
+			M98095_S2NORMAL|M98095_SDATA);
+
+	error |= max98095_i2c_write(M98095_040_DAI3_IOCFG,
+			M98095_S3NORMAL|M98095_SDATA);
+
+	/* take the codec out of the shut down */
+	error |= max98095_update_bits(M98095_097_PWR_SYS, M98095_SHDNRUN,
+			M98095_SHDNRUN);
+	/* route DACL and DACR output to HO and Spekers */
+	error |= max98095_i2c_write(M98095_050_MIX_SPK_LEFT, 0x01); /* DACL */
+	error |= max98095_i2c_write(M98095_051_MIX_SPK_RIGHT, 0x01);/* DACR */
+	error |= max98095_i2c_write(M98095_04C_MIX_HP_LEFT, 0x01);  /* DACL */
+	error |= max98095_i2c_write(M98095_04D_MIX_HP_RIGHT, 0x01); /* DACR */
+
+	/* power Enable */
+	error |= max98095_i2c_write(M98095_091_PWR_EN_OUT, 0xF3);
+
+	/* set Volume */
+	error |= max98095_i2c_write(M98095_064_LVL_HP_L, 15);
+	error |= max98095_i2c_write(M98095_065_LVL_HP_R, 15);
+	error |= max98095_i2c_write(M98095_067_LVL_SPK_L, 16);
+	error |= max98095_i2c_write(M98095_068_LVL_SPK_R, 16);
+
+	/* Enable DAIs */
+	error |= max98095_i2c_write(M98095_093_BIAS_CTRL, 0x30);
+	error |= max98095_i2c_write(M98095_096_PWR_DAC_CK, 0x07);
+
+err_access:
+	if (error < 0)
+		return -1;
+
+	return 0;
+}
+
+static int max98095_do_init(struct sound_codec_info *pcodec_info,
+			int sampling_rate, int mclk_freq,
+			int bits_per_sample)
+{
+	int ret = 0;
+
+	/* Enable codec clock */
+	set_xclkout();
+
+	/* shift the device address by 1 for 7 bit addressing */
+	g_max98095_i2c_dev_addr = pcodec_info->i2c_dev_addr >> 1;
+
+	if (pcodec_info->codec_type == CODEC_MAX_98095)
+		g_max98095_info.devtype = MAX98095;
+	else {
+		debug("%s: Codec id [%d] not defined\n", __func__,
+				pcodec_info->codec_type);
+		return -1;
+	}
+
+	ret = max98095_device_init(&g_max98095_info);
+	if (ret < 0) {
+		debug("%s: max98095 codec chip init failed\n", __func__);
+		return ret;
+	}
+
+	ret = max98095_set_sysclk(&g_max98095_info, mclk_freq);
+	if (ret < 0) {
+		debug("%s: max98095 codec set sys clock failed\n", __func__);
+		return ret;
+	}
+
+	ret = max98095_hw_params(&g_max98095_info, sampling_rate,
+				bits_per_sample);
+
+	if (ret == 0) {
+		ret = max98095_set_fmt(&g_max98095_info,
+					SND_SOC_DAIFMT_I2S |
+					SND_SOC_DAIFMT_NB_NF |
+					SND_SOC_DAIFMT_CBS_CFS);
+	}
+
+	return ret;
+}
+
+static int get_max98095_codec_values(struct sound_codec_info *pcodec_info,
+				const void *blob)
+{
+	int error = 0;
+#ifdef CONFIG_OF_CONTROL
+	enum fdt_compat_id compat;
+	int node;
+	int parent;
+
+	/* Get the node from FDT for codec */
+	node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_98095_CODEC);
+	if (node <= 0) {
+		debug("EXYNOS_SOUND: No node for codec in device tree\n");
+		debug("node = %d\n", node);
+		return -1;
+	}
+
+	parent = fdt_parent_offset(blob, node);
+	if (parent < 0) {
+		debug("%s: Cannot find node parent\n", __func__);
+		return -1;
+	}
+
+	compat = fdtdec_lookup(blob, parent);
+	switch (compat) {
+	case COMPAT_SAMSUNG_S3C2440_I2C:
+		pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
+		error |= pcodec_info->i2c_bus;
+		debug("i2c bus = %d\n", pcodec_info->i2c_bus);
+		pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
+							"reg", 0);
+		error |= pcodec_info->i2c_dev_addr;
+		debug("i2c dev addr = %x\n", pcodec_info->i2c_dev_addr);
+		break;
+	default:
+		debug("%s: Unknown compat id %d\n", __func__, compat);
+		return -1;
+	}
+#else
+	pcodec_info->i2c_bus = AUDIO_I2C_BUS;
+	pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
+	debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
+#endif
+	pcodec_info->codec_type = CODEC_MAX_98095;
+	if (error == -1) {
+		debug("fail to get max98095 codec node properties\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/* max98095 Device Initialisation */
+int max98095_init(const void *blob, int sampling_rate, int mclk_freq,
+			int bits_per_sample)
+{
+	int ret;
+	int old_bus = i2c_get_bus_num();
+	struct sound_codec_info *pcodec_info = &g_codec_info;
+
+	if (get_max98095_codec_values(pcodec_info, blob) < 0) {
+		debug("FDT Codec values failed\n");
+		 return -1;
+	}
+
+	i2c_set_bus_num(pcodec_info->i2c_bus);
+	ret = max98095_do_init(pcodec_info, sampling_rate, mclk_freq,
+				bits_per_sample);
+	i2c_set_bus_num(old_bus);
+
+	return ret;
+}
diff --git a/drivers/sound/max98095.h b/drivers/sound/max98095.h
new file mode 100644
index 00000000000..ae5eb14dbb4
--- /dev/null
+++ b/drivers/sound/max98095.h
@@ -0,0 +1,311 @@
+/*
+ * max98095.h -- MAX98095 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _MAX98095_H
+#define _MAX98095_H
+
+/*
+ * MAX98095 Registers Definition
+ */
+
+#define M98095_000_HOST_DATA		0x00
+#define M98095_001_HOST_INT_STS		0x01
+#define M98095_002_HOST_RSP_STS		0x02
+#define M98095_003_HOST_CMD_STS		0x03
+#define M98095_004_CODEC_STS		0x04
+#define M98095_005_DAI1_ALC_STS		0x05
+#define M98095_006_DAI2_ALC_STS		0x06
+#define M98095_007_JACK_AUTO_STS	0x07
+#define M98095_008_JACK_MANUAL_STS	0x08
+#define M98095_009_JACK_VBAT_STS	0x09
+#define M98095_00A_ACC_ADC_STS		0x0A
+#define M98095_00B_MIC_NG_AGC_STS	0x0B
+#define M98095_00C_SPK_L_VOLT_STS	0x0C
+#define M98095_00D_SPK_R_VOLT_STS	0x0D
+#define M98095_00E_TEMP_SENSOR_STS	0x0E
+#define M98095_00F_HOST_CFG		0x0F
+#define M98095_010_HOST_INT_CFG		0x10
+#define M98095_011_HOST_INT_EN		0x11
+#define M98095_012_CODEC_INT_EN		0x12
+#define M98095_013_JACK_INT_EN		0x13
+#define M98095_014_JACK_INT_EN		0x14
+#define M98095_015_DEC			0x15
+#define M98095_016_RESERVED		0x16
+#define M98095_017_RESERVED		0x17
+#define M98095_018_KEYCODE3		0x18
+#define M98095_019_KEYCODE2		0x19
+#define M98095_01A_KEYCODE1		0x1A
+#define M98095_01B_KEYCODE0		0x1B
+#define M98095_01C_OEMCODE1		0x1C
+#define M98095_01D_OEMCODE0		0x1D
+#define M98095_01E_XCFG1		0x1E
+#define M98095_01F_XCFG2		0x1F
+#define M98095_020_XCFG3		0x20
+#define M98095_021_XCFG4		0x21
+#define M98095_022_XCFG5		0x22
+#define M98095_023_XCFG6		0x23
+#define M98095_024_XGPIO		0x24
+#define M98095_025_XCLKCFG		0x25
+#define M98095_026_SYS_CLK		0x26
+#define M98095_027_DAI1_CLKMODE		0x27
+#define M98095_028_DAI1_CLKCFG_HI	0x28
+#define M98095_029_DAI1_CLKCFG_LO	0x29
+#define M98095_02A_DAI1_FORMAT		0x2A
+#define M98095_02B_DAI1_CLOCK		0x2B
+#define M98095_02C_DAI1_IOCFG		0x2C
+#define M98095_02D_DAI1_TDM		0x2D
+#define M98095_02E_DAI1_FILTERS		0x2E
+#define M98095_02F_DAI1_LVL1		0x2F
+#define M98095_030_DAI1_LVL2		0x30
+#define M98095_031_DAI2_CLKMODE		0x31
+#define M98095_032_DAI2_CLKCFG_HI	0x32
+#define M98095_033_DAI2_CLKCFG_LO	0x33
+#define M98095_034_DAI2_FORMAT		0x34
+#define M98095_035_DAI2_CLOCK		0x35
+#define M98095_036_DAI2_IOCFG		0x36
+#define M98095_037_DAI2_TDM		0x37
+#define M98095_038_DAI2_FILTERS		0x38
+#define M98095_039_DAI2_LVL1		0x39
+#define M98095_03A_DAI2_LVL2		0x3A
+#define M98095_03B_DAI3_CLKMODE		0x3B
+#define M98095_03C_DAI3_CLKCFG_HI	0x3C
+#define M98095_03D_DAI3_CLKCFG_LO	0x3D
+#define M98095_03E_DAI3_FORMAT		0x3E
+#define M98095_03F_DAI3_CLOCK		0x3F
+#define M98095_040_DAI3_IOCFG		0x40
+#define M98095_041_DAI3_TDM		0x41
+#define M98095_042_DAI3_FILTERS		0x42
+#define M98095_043_DAI3_LVL1		0x43
+#define M98095_044_DAI3_LVL2		0x44
+#define M98095_045_CFG_DSP		0x45
+#define M98095_046_DAC_CTRL1		0x46
+#define M98095_047_DAC_CTRL2		0x47
+#define M98095_048_MIX_DAC_LR		0x48
+#define M98095_049_MIX_DAC_M		0x49
+#define M98095_04A_MIX_ADC_LEFT		0x4A
+#define M98095_04B_MIX_ADC_RIGHT	0x4B
+#define M98095_04C_MIX_HP_LEFT		0x4C
+#define M98095_04D_MIX_HP_RIGHT		0x4D
+#define M98095_04E_CFG_HP		0x4E
+#define M98095_04F_MIX_RCV		0x4F
+#define M98095_050_MIX_SPK_LEFT		0x50
+#define M98095_051_MIX_SPK_RIGHT	0x51
+#define M98095_052_MIX_SPK_CFG		0x52
+#define M98095_053_MIX_LINEOUT1		0x53
+#define M98095_054_MIX_LINEOUT2		0x54
+#define M98095_055_MIX_LINEOUT_CFG	0x55
+#define M98095_056_LVL_SIDETONE_DAI12	0x56
+#define M98095_057_LVL_SIDETONE_DAI3	0x57
+#define M98095_058_LVL_DAI1_PLAY	0x58
+#define M98095_059_LVL_DAI1_EQ		0x59
+#define M98095_05A_LVL_DAI2_PLAY	0x5A
+#define M98095_05B_LVL_DAI2_EQ		0x5B
+#define M98095_05C_LVL_DAI3_PLAY	0x5C
+#define M98095_05D_LVL_ADC_L		0x5D
+#define M98095_05E_LVL_ADC_R		0x5E
+#define M98095_05F_LVL_MIC1		0x5F
+#define M98095_060_LVL_MIC2		0x60
+#define M98095_061_LVL_LINEIN		0x61
+#define M98095_062_LVL_LINEOUT1		0x62
+#define M98095_063_LVL_LINEOUT2		0x63
+#define M98095_064_LVL_HP_L		0x64
+#define M98095_065_LVL_HP_R		0x65
+#define M98095_066_LVL_RCV		0x66
+#define M98095_067_LVL_SPK_L		0x67
+#define M98095_068_LVL_SPK_R		0x68
+#define M98095_069_MICAGC_CFG		0x69
+#define M98095_06A_MICAGC_THRESH	0x6A
+#define M98095_06B_SPK_NOISEGATE	0x6B
+#define M98095_06C_DAI1_ALC1_TIME	0x6C
+#define M98095_06D_DAI1_ALC1_COMP	0x6D
+#define M98095_06E_DAI1_ALC1_EXPN	0x6E
+#define M98095_06F_DAI1_ALC1_GAIN	0x6F
+#define M98095_070_DAI1_ALC2_TIME	0x70
+#define M98095_071_DAI1_ALC2_COMP	0x71
+#define M98095_072_DAI1_ALC2_EXPN	0x72
+#define M98095_073_DAI1_ALC2_GAIN	0x73
+#define M98095_074_DAI1_ALC3_TIME	0x74
+#define M98095_075_DAI1_ALC3_COMP	0x75
+#define M98095_076_DAI1_ALC3_EXPN	0x76
+#define M98095_077_DAI1_ALC3_GAIN	0x77
+#define M98095_078_DAI2_ALC1_TIME	0x78
+#define M98095_079_DAI2_ALC1_COMP	0x79
+#define M98095_07A_DAI2_ALC1_EXPN	0x7A
+#define M98095_07B_DAI2_ALC1_GAIN	0x7B
+#define M98095_07C_DAI2_ALC2_TIME	0x7C
+#define M98095_07D_DAI2_ALC2_COMP	0x7D
+#define M98095_07E_DAI2_ALC2_EXPN	0x7E
+#define M98095_07F_DAI2_ALC2_GAIN	0x7F
+#define M98095_080_DAI2_ALC3_TIME	0x80
+#define M98095_081_DAI2_ALC3_COMP	0x81
+#define M98095_082_DAI2_ALC3_EXPN	0x82
+#define M98095_083_DAI2_ALC3_GAIN	0x83
+#define M98095_084_HP_NOISE_GATE	0x84
+#define M98095_085_AUX_ADC		0x85
+#define M98095_086_CFG_LINE		0x86
+#define M98095_087_CFG_MIC		0x87
+#define M98095_088_CFG_LEVEL		0x88
+#define M98095_089_JACK_DET_AUTO	0x89
+#define M98095_08A_JACK_DET_MANUAL	0x8A
+#define M98095_08B_JACK_KEYSCAN_DBC	0x8B
+#define M98095_08C_JACK_KEYSCAN_DLY	0x8C
+#define M98095_08D_JACK_KEY_THRESH	0x8D
+#define M98095_08E_JACK_DC_SLEW		0x8E
+#define M98095_08F_JACK_TEST_CFG	0x8F
+#define M98095_090_PWR_EN_IN		0x90
+#define M98095_091_PWR_EN_OUT		0x91
+#define M98095_092_PWR_EN_OUT		0x92
+#define M98095_093_BIAS_CTRL		0x93
+#define M98095_094_PWR_DAC_21		0x94
+#define M98095_095_PWR_DAC_03		0x95
+#define M98095_096_PWR_DAC_CK		0x96
+#define M98095_097_PWR_SYS		0x97
+
+#define M98095_0FF_REV_ID		0xFF
+
+#define M98095_REG_CNT			(0xFF+1)
+#define M98095_REG_MAX_CACHED		0X97
+
+/* MAX98095 Registers Bit Fields */
+
+/* M98095_00F_HOST_CFG */
+#define M98095_SEG			(1<<0)
+#define M98095_XTEN			(1<<1)
+#define M98095_MDLLEN			(1<<2)
+
+/* M98095_027_DAI1_CLKMODE, M98095_031_DAI2_CLKMODE, M98095_03B_DAI3_CLKMODE */
+#define M98095_CLKMODE_MASK		0xFF
+
+/* M98095_02A_DAI1_FORMAT, M98095_034_DAI2_FORMAT, M98095_03E_DAI3_FORMAT */
+#define M98095_DAI_MAS			(1<<7)
+#define M98095_DAI_WCI			(1<<6)
+#define M98095_DAI_BCI			(1<<5)
+#define M98095_DAI_DLY			(1<<4)
+#define M98095_DAI_TDM			(1<<2)
+#define M98095_DAI_FSW			(1<<1)
+#define M98095_DAI_WS			(1<<0)
+
+/* M98095_02B_DAI1_CLOCK, M98095_035_DAI2_CLOCK, M98095_03F_DAI3_CLOCK */
+#define M98095_DAI_BSEL64		(1<<0)
+#define M98095_DAI_DOSR_DIV2		(0<<5)
+#define M98095_DAI_DOSR_DIV4		(1<<5)
+
+/* M98095_02C_DAI1_IOCFG, M98095_036_DAI2_IOCFG, M98095_040_DAI3_IOCFG */
+#define M98095_S1NORMAL			(1<<6)
+#define M98095_S2NORMAL			(2<<6)
+#define M98095_S3NORMAL			(3<<6)
+#define M98095_SDATA			(3<<0)
+
+/* M98095_02E_DAI1_FILTERS, M98095_038_DAI2_FILTERS, M98095_042_DAI3_FILTERS */
+#define M98095_DAI_DHF			(1<<3)
+
+/* M98095_045_DSP_CFG */
+#define M98095_DSPNORMAL		(5<<4)
+
+/* M98095_048_MIX_DAC_LR */
+#define M98095_DAI1L_TO_DACR		(1<<7)
+#define M98095_DAI1R_TO_DACR		(1<<6)
+#define M98095_DAI2M_TO_DACR		(1<<5)
+#define M98095_DAI1L_TO_DACL		(1<<3)
+#define M98095_DAI1R_TO_DACL		(1<<2)
+#define M98095_DAI2M_TO_DACL		(1<<1)
+#define M98095_DAI3M_TO_DACL		(1<<0)
+
+/* M98095_049_MIX_DAC_M */
+#define M98095_DAI1L_TO_DACM		(1<<3)
+#define M98095_DAI1R_TO_DACM		(1<<2)
+#define M98095_DAI2M_TO_DACM		(1<<1)
+#define M98095_DAI3M_TO_DACM		(1<<0)
+
+/* M98095_04E_MIX_HP_CFG */
+#define M98095_HPNORMAL			(3<<4)
+
+/* M98095_05F_LVL_MIC1, M98095_060_LVL_MIC2 */
+#define M98095_MICPRE_MASK		(3<<5)
+#define M98095_MICPRE_SHIFT		5
+
+/* M98095_064_LVL_HP_L, M98095_065_LVL_HP_R */
+#define M98095_HP_MUTE			(1<<7)
+
+/* M98095_066_LVL_RCV */
+#define M98095_REC_MUTE			(1<<7)
+
+/* M98095_067_LVL_SPK_L, M98095_068_LVL_SPK_R */
+#define M98095_SP_MUTE			(1<<7)
+
+/* M98095_087_CFG_MIC */
+#define M98095_MICSEL_MASK		(3<<0)
+#define M98095_DIGMIC_L			(1<<2)
+#define M98095_DIGMIC_R			(1<<3)
+#define M98095_DIGMIC2L			(1<<4)
+#define M98095_DIGMIC2R			(1<<5)
+
+/* M98095_088_CFG_LEVEL */
+#define M98095_VSEN			(1<<6)
+#define M98095_ZDEN			(1<<5)
+#define M98095_BQ2EN			(1<<3)
+#define M98095_BQ1EN			(1<<2)
+#define M98095_EQ2EN			(1<<1)
+#define M98095_EQ1EN			(1<<0)
+
+/* M98095_090_PWR_EN_IN */
+#define M98095_INEN			(1<<7)
+#define M98095_MB2EN			(1<<3)
+#define M98095_MB1EN			(1<<2)
+#define M98095_MBEN			(3<<2)
+#define M98095_ADREN			(1<<1)
+#define M98095_ADLEN			(1<<0)
+
+/* M98095_091_PWR_EN_OUT */
+#define M98095_HPLEN			(1<<7)
+#define M98095_HPREN			(1<<6)
+#define M98095_SPLEN			(1<<5)
+#define M98095_SPREN			(1<<4)
+#define M98095_RECEN			(1<<3)
+#define M98095_DALEN			(1<<1)
+#define M98095_DAREN			(1<<0)
+
+/* M98095_092_PWR_EN_OUT */
+#define M98095_SPK_FIXEDSPECTRUM	(0<<4)
+#define M98095_SPK_SPREADSPECTRUM	(1<<4)
+
+/* M98095_097_PWR_SYS */
+#define M98095_SHDNRUN			(1<<7)
+#define M98095_PERFMODE			(1<<3)
+#define M98095_HPPLYBACK		(1<<2)
+#define M98095_PWRSV8K			(1<<1)
+#define M98095_PWRSV			(1<<0)
+
+#define M98095_COEFS_PER_BAND		5
+
+/* Equalizer filter coefficients */
+#define M98095_110_DAI1_EQ_BASE		0x10
+#define M98095_142_DAI2_EQ_BASE		0x42
+
+/* Biquad filter coefficients */
+#define M98095_174_DAI1_BQ_BASE		0x74
+#define M98095_17E_DAI2_BQ_BASE		0x7E
+
+/* function prototype */
+
+/*
+ * intialise max98095 sound codec device for the given configuration
+ *
+ * @param blob			FDT node for codec values
+ * @param sampling_rate		Sampling rate (Hz)
+ * @param mclk_freq		MCLK Frequency (Hz)
+ * @param bits_per_sample	bits per Sample (must be 16 or 24)
+ *
+ * @returns -1 for error and 0 Success.
+ */
+int max98095_init(const void *blob, int sampling_rate, int mclk_freq,
+			int bits_per_sample);
+
+#endif