usb: r8a66597: Checkpatch cleanup

Fix remaining checkpatch complaints in the driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>

2 files changed, 268 insertions, 268 deletions

diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index b5a93e29f3a..8b60ab2c6d0 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -58,7 +58,7 @@ static void get_hub_data(struct usb_device *dev, u16 *hub_devnum, u16 *hubport)
 
 	/* check a device connected to root_hub */
 	if ((parent && parent->devnum == 1) ||
-	    (dev->devnum == 1))
+	    dev->devnum == 1)
 		return;
 
 	*hub_devnum = (u8)parent->devnum;
@@ -66,7 +66,7 @@ static void get_hub_data(struct usb_device *dev, u16 *hub_devnum, u16 *hubport)
 }
 
 static void set_devadd(struct r8a66597 *r8a66597, u8 r8a66597_address,
-			struct usb_device *dev, int port)
+		       struct usb_device *dev, int port)
 {
 	u16 val, usbspd, upphub, hubport;
 	unsigned long devadd_reg = get_devadd_addr(r8a66597_address);
@@ -321,7 +321,7 @@ static int send_bulk_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
 	R8A66597_DPRINT("%s\n", __func__);
 
 	r8a66597_mdfy(r8a66597, MBW | BULK_OUT_PIPENUM,
-			MBW | CURPIPE, CFIFOSEL);
+		      MBW | CURPIPE, CFIFOSEL);
 	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, BULK_OUT_PIPENUM);
 	tmp = r8a66597_read(r8a66597, CFIFOCTR);
 	if ((tmp & FRDY) == 0) {
@@ -345,7 +345,7 @@ static int send_bulk_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
 	dev->act_len += size;
 
 	r8a66597_mdfy(r8a66597, PID_BUF, PID,
-			get_pipectr_addr(BULK_OUT_PIPENUM));
+		      get_pipectr_addr(BULK_OUT_PIPENUM));
 
 	while (!(r8a66597_read(r8a66597, BEMPSTS) & (1 << BULK_OUT_PIPENUM)))
 		if (ctrlc())
@@ -354,7 +354,7 @@ static int send_bulk_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
 
 	if (dev->act_len >= transfer_len)
 		r8a66597_mdfy(r8a66597, PID_NAK, PID,
-				get_pipectr_addr(BULK_OUT_PIPENUM));
+			      get_pipectr_addr(BULK_OUT_PIPENUM));
 
 	return 0;
 }
@@ -375,17 +375,17 @@ static int receive_bulk_packet(struct r8a66597 *r8a66597,
 	/* prepare */
 	if (dev->act_len == 0) {
 		r8a66597_mdfy(r8a66597, PID_NAK, PID,
-				get_pipectr_addr(pipenum));
+			      get_pipectr_addr(pipenum));
 		r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
 
 		r8a66597_write(r8a66597, TRCLR, get_pipetre_addr(pipenum));
 		r8a66597_write(r8a66597,
-				(transfer_len + maxpacket - 1) / maxpacket,
+			       (transfer_len + maxpacket - 1) / maxpacket,
 				get_pipetrn_addr(pipenum));
 		r8a66597_bset(r8a66597, TRENB, get_pipetre_addr(pipenum));
 
 		r8a66597_mdfy(r8a66597, PID_BUF, PID,
-				get_pipectr_addr(pipenum));
+			      get_pipectr_addr(pipenum));
 	}
 
 	r8a66597_mdfy(r8a66597, MBW | pipenum, MBW | CURPIPE, CFIFOSEL);
@@ -462,7 +462,7 @@ static int receive_control_packet(struct r8a66597 *r8a66597,
 }
 
 static int send_status_packet(struct r8a66597 *r8a66597,
-			       unsigned long pipe)
+			      unsigned long pipe)
 {
 	r8a66597_bset(r8a66597, SQSET, DCPCTR);
 	r8a66597_mdfy(r8a66597, PID_NAK, PID, DCPCTR);
@@ -553,9 +553,7 @@ static int check_usb_device_connecting(struct r8a66597 *r8a66597)
 	return -1;	/* fail */
 }
 
-/*-------------------------------------------------------------------------*
- * Virtual Root Hub
- *-------------------------------------------------------------------------*/
+/* Virtual Root Hub */
 
 #include <usbroothubdes.h>
 
@@ -637,34 +635,34 @@ static int r8a66597_submit_rh_msg(struct udevice *udev, struct usb_device *dev,
 		switch ((wValue & 0xff00) >> 8) {
 		case (0x01): /* device descriptor */
 			len = min_t(unsigned int,
-				  leni,
+				    leni,
 				  min_t(unsigned int,
-				      sizeof(root_hub_dev_des),
+					sizeof(root_hub_dev_des),
 				      wLength));
 			memcpy(buffer, root_hub_dev_des, len);
 			break;
 		case (0x02): /* configuration descriptor */
 			len = min_t(unsigned int,
-				  leni,
+				    leni,
 				  min_t(unsigned int,
-				      sizeof(root_hub_config_des),
+					sizeof(root_hub_config_des),
 				      wLength));
 			memcpy(buffer, root_hub_config_des, len);
 			break;
 		case (0x03): /* string descriptors */
 			if (wValue == 0x0300) {
 				len = min_t(unsigned int,
-					  leni,
+					    leni,
 					  min_t(unsigned int,
-					      sizeof(root_hub_str_index0),
+						sizeof(root_hub_str_index0),
 					      wLength));
 				memcpy(buffer, root_hub_str_index0, len);
 			}
 			if (wValue == 0x0301) {
 				len = min_t(unsigned int,
-					  leni,
+					    leni,
 					  min_t(unsigned int,
-					      sizeof(root_hub_str_index1),
+						sizeof(root_hub_str_index1),
 					      wLength));
 				memcpy(buffer, root_hub_str_index1, len);
 			}
@@ -697,7 +695,8 @@ static int r8a66597_submit_rh_msg(struct udevice *udev, struct usb_device *dev,
 		} else {
 			data[0] += 2;
 			data[8] = (temp & RH_B_DR) >> 8;
-			data[10] = data[9] = 0xff;
+			data[9] = 0xff;
+			data[10] = 0xff;
 		}
 
 		len = min_t(unsigned int, leni,
@@ -707,7 +706,7 @@ static int r8a66597_submit_rh_msg(struct udevice *udev, struct usb_device *dev,
 	}
 
 	case RH_GET_CONFIGURATION:
-		*(__u8 *) buffer = 0x01;
+		*(__u8 *)buffer = 0x01;
 		len = 1;
 		break;
 	case RH_SET_CONFIGURATION:
@@ -727,9 +726,10 @@ static int r8a66597_submit_rh_msg(struct udevice *udev, struct usb_device *dev,
 	return stat;
 }
 
-static int r8a66597_submit_control_msg(struct udevice *udev, struct usb_device *dev,
-				   unsigned long pipe, void *buffer, int length,
-				   struct devrequest *setup)
+static int r8a66597_submit_control_msg(struct udevice *udev,
+				       struct usb_device *dev,
+				       unsigned long pipe, void *buffer,
+				       int length, struct devrequest *setup)
 {
 	struct r8a66597 *r8a66597 = dev_get_priv(udev);
 	u16 r8a66597_address = setup->request == USB_REQ_SET_ADDRESS ?
@@ -754,7 +754,7 @@ static int r8a66597_submit_control_msg(struct udevice *udev, struct usb_device *
 	dev->act_len = 0;
 	if (usb_pipein(pipe))
 		if (receive_control_packet(r8a66597, dev, buffer,
-						length) < 0)
+					   length) < 0)
 			return -1;
 
 	if (send_status_packet(r8a66597, pipe) < 0)
@@ -765,8 +765,9 @@ static int r8a66597_submit_control_msg(struct udevice *udev, struct usb_device *
 	return 0;
 }
 
-static int r8a66597_submit_bulk_msg(struct udevice *udev, struct usb_device *dev,
-				unsigned long pipe, void *buffer, int length)
+static int r8a66597_submit_bulk_msg(struct udevice *udev,
+				    struct usb_device *dev, unsigned long pipe,
+				    void *buffer, int length)
 {
 	struct r8a66597 *r8a66597 = dev_get_priv(udev);
 	int ret = 0;
@@ -788,10 +789,10 @@ static int r8a66597_submit_bulk_msg(struct udevice *udev, struct usb_device *dev
 
 		if (usb_pipein(pipe))
 			ret = receive_bulk_packet(r8a66597, dev, pipe, buffer,
-							length);
+						  length);
 		else
 			ret = send_bulk_packet(r8a66597, dev, pipe, buffer,
-							length);
+					       length);
 	}
 
 	if (ret == 0)
@@ -824,7 +825,7 @@ static int r8a66597_usb_probe(struct udevice *dev)
 	mdelay(100);
 
 	enable_controller(priv);
-	r8a66597_port_power(priv, 0 , 1);
+	r8a66597_port_power(priv, 0, 1);
 
 	/* check usb device */
 	check_usb_device_connecting(priv);
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index 7ad14ddfd2c..3077bc79990 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -72,9 +72,9 @@
 #define PIPE3TRE	0x98
 #define PIPE3TRN	0x9A
 #define PIPE4TRE	0x9C
-#define	PIPE4TRN	0x9E
-#define	PIPE5TRE	0xA0
-#define	PIPE5TRN	0xA2
+#define PIPE4TRN	0x9E
+#define PIPE5TRE	0xA0
+#define PIPE5TRN	0xA2
 #define DEVADD0		0xD0
 #define DEVADD1		0xD2
 #define DEVADD2		0xD4
@@ -89,290 +89,290 @@
 #define SUSPMODE0	0x102	/* RZ/A only */
 
 /* System Configuration Control Register */
-#define	HSE		0x0080	/* b7: Hi-speed enable */
-#define	DCFM		0x0040	/* b6: Controller function select  */
-#define	DRPD		0x0020	/* b5: D+/- pull down control */
-#define	DPRPU		0x0010	/* b4: D+ pull up control */
-#define	XTAL		0x0004	/* b2: Crystal selection */
-#define	  XTAL12	 0x0004	  /* 12MHz */
-#define	  XTAL48	 0x0000	  /* 48MHz */
-#define	UPLLE		0x0002	/* b1: internal PLL control */
-#define	USBE		0x0001	/* b0: USB module operation enable */
+#define HSE		0x0080	/* b7: Hi-speed enable */
+#define DCFM		0x0040	/* b6: Controller function select  */
+#define DRPD		0x0020	/* b5: D+/- pull down control */
+#define DPRPU		0x0010	/* b4: D+ pull up control */
+#define XTAL		0x0004	/* b2: Crystal selection */
+#define XTAL12		0x0004	/* 12MHz */
+#define XTAL48		0x0000	/* 48MHz */
+#define UPLLE		0x0002	/* b1: internal PLL control */
+#define USBE		0x0001	/* b0: USB module operation enable */
 
 /* System Configuration Status Register */
-#define	OVCBIT		0x8000	/* b15-14: Over-current bit */
-#define	OVCMON		0xC000	/* b15-14: Over-current monitor */
-#define	SOFEA		0x0020	/* b5: SOF monitor */
-#define	IDMON		0x0004	/* b3: ID-pin monitor */
-#define	LNST		0x0003	/* b1-0: D+, D- line status */
-#define	  SE1		 0x0003	  /* SE1 */
-#define	  FS_KSTS	 0x0002	  /* Full-Speed K State */
-#define	  FS_JSTS	 0x0001	  /* Full-Speed J State */
-#define	  LS_JSTS	 0x0002	  /* Low-Speed J State */
-#define	  LS_KSTS	 0x0001	  /* Low-Speed K State */
-#define	  SE0		 0x0000	  /* SE0 */
+#define OVCBIT		0x8000	/* b15-14: Over-current bit */
+#define OVCMON		0xC000	/* b15-14: Over-current monitor */
+#define SOFEA		0x0020	/* b5: SOF monitor */
+#define IDMON		0x0004	/* b3: ID-pin monitor */
+#define LNST		0x0003	/* b1-0: D+, D- line status */
+#define SE1		0x0003	/* SE1 */
+#define FS_KSTS		0x0002	/* Full-Speed K State */
+#define FS_JSTS		0x0001	/* Full-Speed J State */
+#define LS_JSTS		0x0002	/* Low-Speed J State */
+#define LS_KSTS		0x0001	/* Low-Speed K State */
+#define SE0		0x0000	/* SE0 */
 
 /* Device State Control Register */
-#define	EXTLP0		0x0400	/* b10: External port */
-#define	VBOUT		0x0200	/* b9: VBUS output */
-#define	WKUP		0x0100	/* b8: Remote wakeup */
-#define	RWUPE		0x0080	/* b7: Remote wakeup sense */
-#define	USBRST		0x0040	/* b6: USB reset enable */
-#define	RESUME		0x0020	/* b5: Resume enable */
-#define	UACT		0x0010	/* b4: USB bus enable */
-#define	RHST		0x0007	/* b1-0: Reset handshake status */
-#define	  HSPROC	 0x0004	  /* HS handshake is processing */
-#define	  HSMODE	 0x0003	  /* Hi-Speed mode */
-#define	  FSMODE	 0x0002	  /* Full-Speed mode */
-#define	  LSMODE	 0x0001	  /* Low-Speed mode */
-#define	  UNDECID	 0x0000	  /* Undecided */
+#define EXTLP0		0x0400	/* b10: External port */
+#define VBOUT		0x0200	/* b9: VBUS output */
+#define WKUP		0x0100	/* b8: Remote wakeup */
+#define RWUPE		0x0080	/* b7: Remote wakeup sense */
+#define USBRST		0x0040	/* b6: USB reset enable */
+#define RESUME		0x0020	/* b5: Resume enable */
+#define UACT		0x0010	/* b4: USB bus enable */
+#define RHST		0x0007	/* b1-0: Reset handshake status */
+#define HSPROC		0x0004	/* HS handshake is processing */
+#define HSMODE		0x0003	/* Hi-Speed mode */
+#define FSMODE		0x0002	/* Full-Speed mode */
+#define LSMODE		0x0001	/* Low-Speed mode */
+#define UNDECID		0x0000	/* Undecided */
 
 /* Test Mode Register */
-#define	UTST			0x000F	/* b3-0: Test select */
-#define	  H_TST_PACKET		 0x000C	  /* HOST TEST Packet */
-#define	  H_TST_SE0_NAK		 0x000B	  /* HOST TEST SE0 NAK */
-#define	  H_TST_K		 0x000A	  /* HOST TEST K */
-#define	  H_TST_J		 0x0009	  /* HOST TEST J */
-#define	  H_TST_NORMAL		 0x0000	  /* HOST Normal Mode */
-#define	  P_TST_PACKET		 0x0004	  /* PERI TEST Packet */
-#define	  P_TST_SE0_NAK		 0x0003	  /* PERI TEST SE0 NAK */
-#define	  P_TST_K		 0x0002	  /* PERI TEST K */
-#define	  P_TST_J		 0x0001	  /* PERI TEST J */
-#define	  P_TST_NORMAL		 0x0000	  /* PERI Normal Mode */
+#define UTST		0x000F	/* b3-0: Test select */
+#define H_TST_PACKET	0x000C	/* HOST TEST Packet */
+#define H_TST_SE0_NAK	0x000B	/* HOST TEST SE0 NAK */
+#define H_TST_K		0x000A	/* HOST TEST K */
+#define H_TST_J		0x0009	/* HOST TEST J */
+#define H_TST_NORMAL	0x0000	/* HOST Normal Mode */
+#define P_TST_PACKET	0x0004	/* PERI TEST Packet */
+#define P_TST_SE0_NAK	0x0003	/* PERI TEST SE0 NAK */
+#define P_TST_K		0x0002	/* PERI TEST K */
+#define P_TST_J		0x0001	/* PERI TEST J */
+#define P_TST_NORMAL	0x0000	/* PERI Normal Mode */
 
 /* Data Pin Configuration Register */
-#define	LDRV			0x8000	/* b15: Drive Current Adjust */
-#define	  VIF1			  0x0000		/* VIF = 1.8V */
-#define	  VIF3			  0x8000		/* VIF = 3.3V */
-#define	INTA			0x0001	/* b1: USB INT-pin active */
+#define LDRV		0x8000	/* b15: Drive Current Adjust */
+#define VIF1		0x0000	/* VIF = 1.8V */
+#define VIF3		0x8000	/* VIF = 3.3V */
+#define INTA		0x0001	/* b1: USB INT-pin active */
 
 /* DMAx Pin Configuration Register */
-#define	DREQA			0x4000	/* b14: Dreq active select */
-#define	BURST			0x2000	/* b13: Burst mode */
-#define	DACKA			0x0400	/* b10: Dack active select */
-#define	DFORM			0x0380	/* b9-7: DMA mode select */
-#define	  CPU_ADR_RD_WR		 0x0000	  /* Address + RD/WR mode (CPU bus) */
-#define	  CPU_DACK_RD_WR	 0x0100	  /* DACK + RD/WR mode (CPU bus) */
-#define	  CPU_DACK_ONLY		 0x0180	  /* DACK only mode (CPU bus) */
-#define	  SPLIT_DACK_ONLY	 0x0200	  /* DACK only mode (SPLIT bus) */
-#define	DENDA			0x0040	/* b6: Dend active select */
-#define	PKTM			0x0020	/* b5: Packet mode */
-#define	DENDE			0x0010	/* b4: Dend enable */
-#define	OBUS			0x0004	/* b2: OUTbus mode */
+#define DREQA		0x4000	/* b14: Dreq active select */
+#define BURST		0x2000	/* b13: Burst mode */
+#define DACKA		0x0400	/* b10: Dack active select */
+#define DFORM		0x0380	/* b9-7: DMA mode select */
+#define CPU_ADR_RD_WR	0x0000	/* Address + RD/WR mode (CPU bus) */
+#define CPU_DACK_RD_WR	0x0100	/* DACK + RD/WR mode (CPU bus) */
+#define CPU_DACK_ONLY	0x0180	/* DACK only mode (CPU bus) */
+#define SPLIT_DACK_ONLY	0x0200	/* DACK only mode (SPLIT bus) */
+#define DENDA		0x0040	/* b6: Dend active select */
+#define PKTM		0x0020	/* b5: Packet mode */
+#define DENDE		0x0010	/* b4: Dend enable */
+#define OBUS		0x0004	/* b2: OUTbus mode */
 
 /* CFIFO/DxFIFO Port Select Register */
-#define	RCNT		0x8000	/* b15: Read count mode */
-#define	REW		0x4000	/* b14: Buffer rewind */
-#define	DCLRM		0x2000	/* b13: DMA buffer clear mode */
-#define	DREQE		0x1000	/* b12: DREQ output enable */
-#define	MBW		0x0800	/* b10: Maximum bit width for FIFO access */
-#define	  MBW_8		 0x0000	  /*  8bit */
-#define	  MBW_16	 0x0400	  /* 16bit */
-#define	  MBW_32	 0x0800   /* 32bit */
-#define	BIGEND		0x0100	/* b8: Big endian mode */
-#define	  BYTE_LITTLE	 0x0000		/* little dendian */
-#define	  BYTE_BIG	 0x0100		/* big endifan */
-#define	ISEL		0x0020	/* b5: DCP FIFO port direction select */
-#define	CURPIPE		0x000F	/* b2-0: PIPE select */
+#define RCNT		0x8000	/* b15: Read count mode */
+#define REW		0x4000	/* b14: Buffer rewind */
+#define DCLRM		0x2000	/* b13: DMA buffer clear mode */
+#define DREQE		0x1000	/* b12: DREQ output enable */
+#define MBW		0x0800	/* b10: Maximum bit width for FIFO access */
+#define MBW_8		0x0000	/*  8bit */
+#define MBW_16		0x0400	/* 16bit */
+#define MBW_32		0x0800	/* 32bit */
+#define BIGEND		0x0100	/* b8: Big endian mode */
+#define BYTE_LITTLE	0x0000	/* little dendian */
+#define BYTE_BIG	0x0100	/* big endifan */
+#define ISEL		0x0020	/* b5: DCP FIFO port direction select */
+#define CURPIPE		0x000F	/* b2-0: PIPE select */
 
 /* CFIFO/DxFIFO Port Control Register */
-#define	BVAL		0x8000	/* b15: Buffer valid flag */
-#define	BCLR		0x4000	/* b14: Buffer clear */
-#define	FRDY		0x2000	/* b13: FIFO ready */
-#define	DTLN		0x0FFF	/* b11-0: FIFO received data length */
+#define BVAL		0x8000	/* b15: Buffer valid flag */
+#define BCLR		0x4000	/* b14: Buffer clear */
+#define FRDY		0x2000	/* b13: FIFO ready */
+#define DTLN		0x0FFF	/* b11-0: FIFO received data length */
 
 /* Interrupt Enable Register 0 */
-#define	VBSE	0x8000	/* b15: VBUS interrupt */
-#define	RSME	0x4000	/* b14: Resume interrupt */
-#define	SOFE	0x2000	/* b13: Frame update interrupt */
-#define	DVSE	0x1000	/* b12: Device state transition interrupt */
-#define	CTRE	0x0800	/* b11: Control transfer stage transition interrupt */
-#define	BEMPE	0x0400	/* b10: Buffer empty interrupt */
-#define	NRDYE	0x0200	/* b9: Buffer not ready interrupt */
-#define	BRDYE	0x0100	/* b8: Buffer ready interrupt */
+#define VBSE	0x8000	/* b15: VBUS interrupt */
+#define RSME	0x4000	/* b14: Resume interrupt */
+#define SOFE	0x2000	/* b13: Frame update interrupt */
+#define DVSE	0x1000	/* b12: Device state transition interrupt */
+#define CTRE	0x0800	/* b11: Control transfer stage transition interrupt */
+#define BEMPE	0x0400	/* b10: Buffer empty interrupt */
+#define NRDYE	0x0200	/* b9: Buffer not ready interrupt */
+#define BRDYE	0x0100	/* b8: Buffer ready interrupt */
 
 /* Interrupt Enable Register 1 */
-#define	OVRCRE		0x8000	/* b15: Over-current interrupt */
-#define	BCHGE		0x4000	/* b14: USB us chenge interrupt */
-#define	DTCHE		0x1000	/* b12: Detach sense interrupt */
-#define	ATTCHE		0x0800	/* b11: Attach sense interrupt */
-#define	EOFERRE		0x0040	/* b6: EOF error interrupt */
-#define	SIGNE		0x0020	/* b5: SETUP IGNORE interrupt */
-#define	SACKE		0x0010	/* b4: SETUP ACK interrupt */
+#define OVRCRE		0x8000	/* b15: Over-current interrupt */
+#define BCHGE		0x4000	/* b14: USB us chenge interrupt */
+#define DTCHE		0x1000	/* b12: Detach sense interrupt */
+#define ATTCHE		0x0800	/* b11: Attach sense interrupt */
+#define EOFERRE		0x0040	/* b6: EOF error interrupt */
+#define SIGNE		0x0020	/* b5: SETUP IGNORE interrupt */
+#define SACKE		0x0010	/* b4: SETUP ACK interrupt */
 
 /* BRDY Interrupt Enable/Status Register */
-#define	BRDY9		0x0200	/* b9: PIPE9 */
-#define	BRDY8		0x0100	/* b8: PIPE8 */
-#define	BRDY7		0x0080	/* b7: PIPE7 */
-#define	BRDY6		0x0040	/* b6: PIPE6 */
-#define	BRDY5		0x0020	/* b5: PIPE5 */
-#define	BRDY4		0x0010	/* b4: PIPE4 */
-#define	BRDY3		0x0008	/* b3: PIPE3 */
-#define	BRDY2		0x0004	/* b2: PIPE2 */
-#define	BRDY1		0x0002	/* b1: PIPE1 */
-#define	BRDY0		0x0001	/* b1: PIPE0 */
+#define BRDY9		0x0200	/* b9: PIPE9 */
+#define BRDY8		0x0100	/* b8: PIPE8 */
+#define BRDY7		0x0080	/* b7: PIPE7 */
+#define BRDY6		0x0040	/* b6: PIPE6 */
+#define BRDY5		0x0020	/* b5: PIPE5 */
+#define BRDY4		0x0010	/* b4: PIPE4 */
+#define BRDY3		0x0008	/* b3: PIPE3 */
+#define BRDY2		0x0004	/* b2: PIPE2 */
+#define BRDY1		0x0002	/* b1: PIPE1 */
+#define BRDY0		0x0001	/* b1: PIPE0 */
 
 /* NRDY Interrupt Enable/Status Register */
-#define	NRDY9		0x0200	/* b9: PIPE9 */
-#define	NRDY8		0x0100	/* b8: PIPE8 */
-#define	NRDY7		0x0080	/* b7: PIPE7 */
-#define	NRDY6		0x0040	/* b6: PIPE6 */
-#define	NRDY5		0x0020	/* b5: PIPE5 */
-#define	NRDY4		0x0010	/* b4: PIPE4 */
-#define	NRDY3		0x0008	/* b3: PIPE3 */
-#define	NRDY2		0x0004	/* b2: PIPE2 */
-#define	NRDY1		0x0002	/* b1: PIPE1 */
-#define	NRDY0		0x0001	/* b1: PIPE0 */
+#define NRDY9		0x0200	/* b9: PIPE9 */
+#define NRDY8		0x0100	/* b8: PIPE8 */
+#define NRDY7		0x0080	/* b7: PIPE7 */
+#define NRDY6		0x0040	/* b6: PIPE6 */
+#define NRDY5		0x0020	/* b5: PIPE5 */
+#define NRDY4		0x0010	/* b4: PIPE4 */
+#define NRDY3		0x0008	/* b3: PIPE3 */
+#define NRDY2		0x0004	/* b2: PIPE2 */
+#define NRDY1		0x0002	/* b1: PIPE1 */
+#define NRDY0		0x0001	/* b1: PIPE0 */
 
 /* BEMP Interrupt Enable/Status Register */
-#define	BEMP9		0x0200	/* b9: PIPE9 */
-#define	BEMP8		0x0100	/* b8: PIPE8 */
-#define	BEMP7		0x0080	/* b7: PIPE7 */
-#define	BEMP6		0x0040	/* b6: PIPE6 */
-#define	BEMP5		0x0020	/* b5: PIPE5 */
-#define	BEMP4		0x0010	/* b4: PIPE4 */
-#define	BEMP3		0x0008	/* b3: PIPE3 */
-#define	BEMP2		0x0004	/* b2: PIPE2 */
-#define	BEMP1		0x0002	/* b1: PIPE1 */
-#define	BEMP0		0x0001	/* b0: PIPE0 */
+#define BEMP9		0x0200	/* b9: PIPE9 */
+#define BEMP8		0x0100	/* b8: PIPE8 */
+#define BEMP7		0x0080	/* b7: PIPE7 */
+#define BEMP6		0x0040	/* b6: PIPE6 */
+#define BEMP5		0x0020	/* b5: PIPE5 */
+#define BEMP4		0x0010	/* b4: PIPE4 */
+#define BEMP3		0x0008	/* b3: PIPE3 */
+#define BEMP2		0x0004	/* b2: PIPE2 */
+#define BEMP1		0x0002	/* b1: PIPE1 */
+#define BEMP0		0x0001	/* b0: PIPE0 */
 
 /* SOF Pin Configuration Register */
-#define	TRNENSEL	0x0100	/* b8: Select transaction enable period */
-#define	BRDYM		0x0040	/* b6: BRDY clear timing */
-#define	INTL		0x0020	/* b5: Interrupt sense select */
-#define	EDGESTS		0x0010	/* b4:  */
-#define	SOFMODE		0x000C	/* b3-2: SOF pin select */
-#define	  SOF_125US	 0x0008	  /* SOF OUT 125us Frame Signal */
-#define	  SOF_1MS	 0x0004	  /* SOF OUT 1ms Frame Signal */
-#define	  SOF_DISABLE	 0x0000	  /* SOF OUT Disable */
+#define TRNENSEL	0x0100	/* b8: Select transaction enable period */
+#define BRDYM		0x0040	/* b6: BRDY clear timing */
+#define INTL		0x0020	/* b5: Interrupt sense select */
+#define EDGESTS		0x0010	/* b4:  */
+#define SOFMODE		0x000C	/* b3-2: SOF pin select */
+#define SOF_125US	0x0008	/* SOF OUT 125us Frame Signal */
+#define SOF_1MS		0x0004	/* SOF OUT 1ms Frame Signal */
+#define SOF_DISABLE	0x0000	/* SOF OUT Disable */
 
 /* Interrupt Status Register 0 */
-#define	VBINT	0x8000	/* b15: VBUS interrupt */
-#define	RESM	0x4000	/* b14: Resume interrupt */
-#define	SOFR	0x2000	/* b13: SOF frame update interrupt */
-#define	DVST	0x1000	/* b12: Device state transition interrupt */
-#define	CTRT	0x0800	/* b11: Control transfer stage transition interrupt */
-#define	BEMP	0x0400	/* b10: Buffer empty interrupt */
-#define	NRDY	0x0200	/* b9: Buffer not ready interrupt */
-#define	BRDY	0x0100	/* b8: Buffer ready interrupt */
-#define	VBSTS	0x0080	/* b7: VBUS input port */
-#define	DVSQ	0x0070	/* b6-4: Device state */
-#define	  DS_SPD_CNFG	 0x0070	  /* Suspend Configured */
-#define	  DS_SPD_ADDR	 0x0060	  /* Suspend Address */
-#define	  DS_SPD_DFLT	 0x0050	  /* Suspend Default */
-#define	  DS_SPD_POWR	 0x0040	  /* Suspend Powered */
-#define	  DS_SUSP	 0x0040	  /* Suspend */
-#define	  DS_CNFG	 0x0030	  /* Configured */
-#define	  DS_ADDS	 0x0020	  /* Address */
-#define	  DS_DFLT	 0x0010	  /* Default */
-#define	  DS_POWR	 0x0000	  /* Powered */
-#define	DVSQS		0x0030	/* b5-4: Device state */
-#define	VALID		0x0008	/* b3: Setup packet detected flag */
-#define	CTSQ		0x0007	/* b2-0: Control transfer stage */
-#define	  CS_SQER	 0x0006	  /* Sequence error */
-#define	  CS_WRND	 0x0005	  /* Control write nodata status stage */
-#define	  CS_WRSS	 0x0004	  /* Control write status stage */
-#define	  CS_WRDS	 0x0003	  /* Control write data stage */
-#define	  CS_RDSS	 0x0002	  /* Control read status stage */
-#define	  CS_RDDS	 0x0001	  /* Control read data stage */
-#define	  CS_IDST	 0x0000	  /* Idle or setup stage */
+#define VBINT	0x8000	/* b15: VBUS interrupt */
+#define RESM	0x4000	/* b14: Resume interrupt */
+#define SOFR	0x2000	/* b13: SOF frame update interrupt */
+#define DVST	0x1000	/* b12: Device state transition interrupt */
+#define CTRT	0x0800	/* b11: Control transfer stage transition interrupt */
+#define BEMP	0x0400	/* b10: Buffer empty interrupt */
+#define NRDY	0x0200	/* b9: Buffer not ready interrupt */
+#define BRDY	0x0100	/* b8: Buffer ready interrupt */
+#define VBSTS	0x0080	/* b7: VBUS input port */
+#define DVSQ	0x0070	/* b6-4: Device state */
+#define DS_SPD_CNFG	0x0070	/* Suspend Configured */
+#define DS_SPD_ADDR	0x0060	/* Suspend Address */
+#define DS_SPD_DFLT	0x0050	/* Suspend Default */
+#define DS_SPD_POWR	0x0040	/* Suspend Powered */
+#define DS_SUSP		0x0040	/* Suspend */
+#define DS_CNFG		0x0030	/* Configured */
+#define DS_ADDS		0x0020	/* Address */
+#define DS_DFLT		0x0010	/* Default */
+#define DS_POWR		0x0000	/* Powered */
+#define DVSQS		0x0030	/* b5-4: Device state */
+#define VALID		0x0008	/* b3: Setup packet detected flag */
+#define CTSQ		0x0007	/* b2-0: Control transfer stage */
+#define CS_SQER		0x0006	/* Sequence error */
+#define CS_WRND		0x0005	/* Control write nodata status stage */
+#define CS_WRSS		0x0004	/* Control write status stage */
+#define CS_WRDS		0x0003	/* Control write data stage */
+#define CS_RDSS		0x0002	/* Control read status stage */
+#define CS_RDDS		0x0001	/* Control read data stage */
+#define CS_IDST		0x0000	/* Idle or setup stage */
 
 /* Interrupt Status Register 1 */
-#define	OVRCR		0x8000	/* b15: Over-current interrupt */
-#define	BCHG		0x4000	/* b14: USB bus chenge interrupt */
-#define	DTCH		0x1000	/* b12: Detach sense interrupt */
-#define	ATTCH		0x0800	/* b11: Attach sense interrupt */
-#define	EOFERR		0x0040	/* b6: EOF-error interrupt */
-#define	SIGN		0x0020	/* b5: Setup ignore interrupt */
-#define	SACK		0x0010	/* b4: Setup acknowledge interrupt */
+#define OVRCR		0x8000	/* b15: Over-current interrupt */
+#define BCHG		0x4000	/* b14: USB bus chenge interrupt */
+#define DTCH		0x1000	/* b12: Detach sense interrupt */
+#define ATTCH		0x0800	/* b11: Attach sense interrupt */
+#define EOFERR		0x0040	/* b6: EOF-error interrupt */
+#define SIGN		0x0020	/* b5: Setup ignore interrupt */
+#define SACK		0x0010	/* b4: Setup acknowledge interrupt */
 
 /* Frame Number Register */
-#define	OVRN		0x8000	/* b15: Overrun error */
-#define	CRCE		0x4000	/* b14: Received data error */
-#define	FRNM		0x07FF	/* b10-0: Frame number */
+#define OVRN		0x8000	/* b15: Overrun error */
+#define CRCE		0x4000	/* b14: Received data error */
+#define FRNM		0x07FF	/* b10-0: Frame number */
 
 /* Micro Frame Number Register */
-#define	UFRNM		0x0007	/* b2-0: Micro frame number */
+#define UFRNM		0x0007	/* b2-0: Micro frame number */
 
 /* Default Control Pipe Maxpacket Size Register */
 /* Pipe Maxpacket Size Register */
-#define	DEVSEL	0xF000	/* b15-14: Device address select */
-#define	MAXP	0x007F	/* b6-0: Maxpacket size of default control pipe */
+#define DEVSEL	0xF000	/* b15-14: Device address select */
+#define MAXP	0x007F	/* b6-0: Maxpacket size of default control pipe */
 
 /* Default Control Pipe Control Register */
-#define	BSTS		0x8000	/* b15: Buffer status */
-#define	SUREQ		0x4000	/* b14: Send USB request  */
-#define	CSCLR		0x2000	/* b13: complete-split status clear */
-#define	CSSTS		0x1000	/* b12: complete-split status */
-#define	SUREQCLR	0x0800	/* b11: stop setup request */
-#define	SQCLR		0x0100	/* b8: Sequence toggle bit clear */
-#define	SQSET		0x0080	/* b7: Sequence toggle bit set */
-#define	SQMON		0x0040	/* b6: Sequence toggle bit monitor */
-#define	PBUSY		0x0020	/* b5: pipe busy */
-#define	PINGE		0x0010	/* b4: ping enable */
-#define	CCPL		0x0004	/* b2: Enable control transfer complete */
-#define	PID		0x0003	/* b1-0: Response PID */
-#define	  PID_STALL11	 0x0003	  /* STALL */
-#define	  PID_STALL	 0x0002	  /* STALL */
-#define	  PID_BUF	 0x0001	  /* BUF */
-#define	  PID_NAK	 0x0000	  /* NAK */
+#define BSTS		0x8000	/* b15: Buffer status */
+#define SUREQ		0x4000	/* b14: Send USB request  */
+#define CSCLR		0x2000	/* b13: complete-split status clear */
+#define CSSTS		0x1000	/* b12: complete-split status */
+#define SUREQCLR	0x0800	/* b11: stop setup request */
+#define SQCLR		0x0100	/* b8: Sequence toggle bit clear */
+#define SQSET		0x0080	/* b7: Sequence toggle bit set */
+#define SQMON		0x0040	/* b6: Sequence toggle bit monitor */
+#define PBUSY		0x0020	/* b5: pipe busy */
+#define PINGE		0x0010	/* b4: ping enable */
+#define CCPL		0x0004	/* b2: Enable control transfer complete */
+#define PID		0x0003	/* b1-0: Response PID */
+#define PID_STALL11	0x0003	/* STALL */
+#define PID_STALL	0x0002	/* STALL */
+#define PID_BUF		0x0001	/* BUF */
+#define PID_NAK		0x0000	/* NAK */
 
 /* Pipe Window Select Register */
-#define	PIPENM		0x0007	/* b2-0: Pipe select */
+#define PIPENM		0x0007	/* b2-0: Pipe select */
 
 /* Pipe Configuration Register */
-#define	R8A66597_TYP	0xC000	/* b15-14: Transfer type */
-#define	  R8A66597_ISO	 0xC000		  /* Isochronous */
-#define	  R8A66597_INT	 0x8000		  /* Interrupt */
-#define	  R8A66597_BULK	 0x4000		  /* Bulk */
-#define	R8A66597_BFRE	0x0400	/* b10: Buffer ready interrupt mode select */
-#define	R8A66597_DBLB	0x0200	/* b9: Double buffer mode select */
-#define	R8A66597_CNTMD	0x0100	/* b8: Continuous transfer mode select */
-#define	R8A66597_SHTNAK	0x0080	/* b7: Transfer end NAK */
-#define	R8A66597_DIR	0x0010	/* b4: Transfer direction select */
-#define	R8A66597_EPNUM	0x000F	/* b3-0: Eendpoint number select */
+#define R8A66597_TYP	0xC000	/* b15-14: Transfer type */
+#define R8A66597_ISO	0xC000	/* Isochronous */
+#define R8A66597_INT	0x8000	/* Interrupt */
+#define R8A66597_BULK	0x4000	/* Bulk */
+#define R8A66597_BFRE	0x0400	/* b10: Buffer ready interrupt mode select */
+#define R8A66597_DBLB	0x0200	/* b9: Double buffer mode select */
+#define R8A66597_CNTMD	0x0100	/* b8: Continuous transfer mode select */
+#define R8A66597_SHTNAK	0x0080	/* b7: Transfer end NAK */
+#define R8A66597_DIR	0x0010	/* b4: Transfer direction select */
+#define R8A66597_EPNUM	0x000F	/* b3-0: Eendpoint number select */
 
 /* Pipe Buffer Configuration Register */
-#define	BUFSIZE		0x7C00	/* b14-10: Pipe buffer size */
-#define	BUFNMB		0x007F	/* b6-0: Pipe buffer number */
-#define	PIPE0BUF	256
-#define	PIPExBUF	64
+#define BUFSIZE		0x7C00	/* b14-10: Pipe buffer size */
+#define BUFNMB		0x007F	/* b6-0: Pipe buffer number */
+#define PIPE0BUF	256
+#define PIPExBUF	64
 
 /* Pipe Maxpacket Size Register */
-#define	MXPS		0x07FF	/* b10-0: Maxpacket size */
+#define MXPS	0x07FF	/* b10-0: Maxpacket size */
 
 /* Pipe Cycle Configuration Register */
-#define	IFIS	0x1000	/* b12: Isochronous in-buffer flush mode select */
-#define	IITV	0x0007	/* b2-0: Isochronous interval */
+#define IFIS	0x1000	/* b12: Isochronous in-buffer flush mode select */
+#define IITV	0x0007	/* b2-0: Isochronous interval */
 
 /* Pipex Control Register */
-#define	BSTS	0x8000	/* b15: Buffer status */
-#define	INBUFM	0x4000	/* b14: IN buffer monitor (Only for PIPE1 to 5) */
-#define	CSCLR	0x2000	/* b13: complete-split status clear */
-#define	CSSTS	0x1000	/* b12: complete-split status */
-#define	ATREPM	0x0400	/* b10: Auto repeat mode */
-#define	ACLRM	0x0200	/* b9: Out buffer auto clear mode */
-#define	SQCLR	0x0100	/* b8: Sequence toggle bit clear */
-#define	SQSET	0x0080	/* b7: Sequence toggle bit set */
-#define	SQMON	0x0040	/* b6: Sequence toggle bit monitor */
-#define	PBUSY	0x0020	/* b5: pipe busy */
-#define	PID	0x0003	/* b1-0: Response PID */
+#define BSTS	0x8000	/* b15: Buffer status */
+#define INBUFM	0x4000	/* b14: IN buffer monitor (Only for PIPE1 to 5) */
+#define CSCLR	0x2000	/* b13: complete-split status clear */
+#define CSSTS	0x1000	/* b12: complete-split status */
+#define ATREPM	0x0400	/* b10: Auto repeat mode */
+#define ACLRM	0x0200	/* b9: Out buffer auto clear mode */
+#define SQCLR	0x0100	/* b8: Sequence toggle bit clear */
+#define SQSET	0x0080	/* b7: Sequence toggle bit set */
+#define SQMON	0x0040	/* b6: Sequence toggle bit monitor */
+#define PBUSY	0x0020	/* b5: pipe busy */
+#define PID	0x0003	/* b1-0: Response PID */
 
 /* PIPExTRE */
-#define	TRENB		0x0200	/* b9: Transaction counter enable */
-#define	TRCLR		0x0100	/* b8: Transaction counter clear */
+#define TRENB		0x0200	/* b9: Transaction counter enable */
+#define TRCLR		0x0100	/* b8: Transaction counter clear */
 
 /* PIPExTRN */
-#define	TRNCNT		0xFFFF	/* b15-0: Transaction counter */
+#define TRNCNT		0xFFFF	/* b15-0: Transaction counter */
 
 /* DEVADDx */
-#define	UPPHUB		0x7800
-#define	HUBPORT		0x0700
-#define	USBSPD		0x00C0
-#define	RTPORT		0x0001
+#define UPPHUB		0x7800
+#define HUBPORT		0x0700
+#define USBSPD		0x00C0
+#define RTPORT		0x0001
 
 /* Suspend Mode Register */
-#define SUSPM		0x4000 /* b14: Suspend */
+#define SUSPM		0x4000	/* b14: Suspend */
 
 #define R8A66597_MAX_NUM_PIPE		10
 #define R8A66597_BUF_BSIZE		8
@@ -387,9 +387,7 @@
 #define BULK_OUT_PIPENUM	4
 #define BULK_OUT_BUFNUM		40
 
-#define check_bulk_or_isoc(pipenum)	((pipenum >= 1 && pipenum <= 5))
-#define check_interrupt(pipenum)	((pipenum >= 6 && pipenum <= 9))
-#define make_devsel(addr)		(addr << 12)
+#define make_devsel(addr)		((addr) << 12)
 
 struct r8a66597 {
 	unsigned long reg;
@@ -420,6 +418,7 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 
 	if (len & 0x00000003) {
 		unsigned long tmp = readl(fifoaddr);
+
 		memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03);
 	}
 }
@@ -459,6 +458,7 @@ static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
 				 u16 val, u16 pat, unsigned long offset)
 {
 	u16 tmp;
+
 	tmp = r8a66597_read(r8a66597, offset);
 	tmp = tmp & (~pat);
 	tmp = tmp | val;
@@ -523,7 +523,6 @@ static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port,
 #define get_pipetrn_addr(pipenum)	(PIPE1TRN + (pipenum - 1) * 4)
 #define get_devadd_addr(address)	(DEVADD0 + address * 2)
 
-
 /* USB HUB CONSTANTS (not OHCI-specific; see hub.h, based on usb_ohci.h) */
 
 /* destination of request */
@@ -606,11 +605,11 @@ static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port,
 
 /* roothub.a masks */
 #define RH_A_NDP	(0xff << 0)	/* number of downstream ports */
-#define RH_A_PSM	(1 << 8)	/* power switching mode */
-#define RH_A_NPS	(1 << 9)	/* no power switching */
-#define RH_A_DT		(1 << 10)	/* device type (mbz) */
-#define RH_A_OCPM	(1 << 11)	/* over current protection mode */
-#define RH_A_NOCP	(1 << 12)	/* no over current protection */
+#define RH_A_PSM	BIT(8)	/* power switching mode */
+#define RH_A_NPS	BIT(9)	/* no power switching */
+#define RH_A_DT		BIT(10)	/* device type (mbz) */
+#define RH_A_OCPM	BIT(11)	/* over current protection mode */
+#define RH_A_NOCP	BIT(12)	/* no over current protection */
 #define RH_A_POTPGT	(0xff << 24)	/* power on to power good time */
 
 #endif	/* __R8A66597_H__ */