arm: Remove spear600 boards and the rest of SPEAr support

These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.  As this is
the last of the SPEAr platforms, so remove the rest of the remaining
support as well.

Cc: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

2 files changed, 0 insertions, 78 deletions

diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index a12e8f27025..eb6fe9f6b30 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
 obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
 obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
 obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
-obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
 obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
 obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
deleted file mode 100644
index 3e87e0c7fd8..00000000000
--- a/drivers/usb/host/ehci-spear.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Armando Visconti, ST Micoelectronics, <armando.visconti@st.com>.
- *
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <asm/io.h>
-#include <usb.h>
-#include <linux/delay.h>
-#include "ehci.h"
-#include <asm/arch/hardware.h>
-#include <asm/arch/spr_misc.h>
-
-static void spear6xx_usbh_stop(void)
-{
-	struct misc_regs *const misc_p =
-	    (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
-	u32 periph1_rst = readl(misc_p->periph1_rst);
-
-	periph1_rst |= PERIPH_USBH1 | PERIPH_USBH2;
-	writel(periph1_rst, misc_p->periph1_rst);
-
-	udelay(1000);
-	periph1_rst &= ~(PERIPH_USBH1 | PERIPH_USBH2);
-	writel(periph1_rst, misc_p->periph1_rst);
-}
-
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	u32 ehci = 0;
-
-	switch (index) {
-	case 0:
-		ehci = CONFIG_SYS_UHC0_EHCI_BASE;
-		break;
-	case 1:
-		ehci = CONFIG_SYS_UHC1_EHCI_BASE;
-		break;
-	default:
-		printf("ERROR: wrong controller index!\n");
-		break;
-	};
-
-	*hccr = (struct ehci_hccr *)(ehci + 0x100);
-	*hcor = (struct ehci_hcor *)((uint32_t) *hccr +
-			HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
-	debug("SPEAr-ehci: init hccr %x and hcor %x hc_length %d\n",
-		(uint32_t)*hccr, (uint32_t)*hcor,
-		(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
-	return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
-#if defined(CONFIG_SPEAR600)
-	spear6xx_usbh_stop();
-#endif
-
-	return 0;
-}