Merge git://git.denx.de/u-boot-spi

2 files changed, 65 insertions, 7 deletions

diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 34f68881ed7..51e28bf07b8 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -113,6 +113,27 @@ static int write_cr(struct spi_flash *flash, u8 wc)
 #endif
 
 #ifdef CONFIG_SPI_FLASH_BAR
+/*
+ * This "clean_bar" is necessary in a situation when one was accessing
+ * spi flash memory > 16 MiB by using Bank Address Register's BA24 bit.
+ *
+ * After it the BA24 bit shall be cleared to allow access to correct
+ * memory region after SW reset (by calling "reset" command).
+ *
+ * Otherwise, the BA24 bit may be left set and then after reset, the
+ * ROM would read/write/erase SPL from 16 MiB * bank_sel address.
+ */
+static int clean_bar(struct spi_flash *flash)
+{
+	u8 cmd, bank_sel = 0;
+
+	if (flash->bank_curr == 0)
+		return 0;
+	cmd = flash->bank_write_cmd;
+
+	return spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
+}
+
 static int write_bar(struct spi_flash *flash, u32 offset)
 {
 	u8 cmd, bank_sel;
@@ -339,6 +360,10 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
 		len -= erase_size;
 	}
 
+#ifdef CONFIG_SPI_FLASH_BAR
+	ret = clean_bar(flash);
+#endif
+
 	return ret;
 }
 
@@ -397,6 +422,10 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
 		offset += chunk_len;
 	}
 
+#ifdef CONFIG_SPI_FLASH_BAR
+	ret = clean_bar(flash);
+#endif
+
 	return ret;
 }
 
@@ -500,6 +529,10 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
 		data += read_len;
 	}
 
+#ifdef CONFIG_SPI_FLASH_BAR
+	ret = clean_bar(flash);
+#endif
+
 	free(cmd);
 	return ret;
 }
diff --git a/drivers/mtd/spi/sunxi_spi_spl.c b/drivers/mtd/spi/sunxi_spi_spl.c
index 852abd41def..35835c27989 100644
--- a/drivers/mtd/spi/sunxi_spi_spl.c
+++ b/drivers/mtd/spi/sunxi_spi_spl.c
@@ -8,6 +8,7 @@
 #include <spl.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
+#include <libfdt.h>
 
 #ifdef CONFIG_SPL_OS_BOOT
 #error CONFIG_SPL_OS_BOOT is not supported yet
@@ -261,27 +262,51 @@ static void spi0_read_data(void *buf, u32 addr, u32 len)
 	}
 }
 
+static ulong spi_load_read(struct spl_load_info *load, ulong sector,
+			   ulong count, void *buf)
+{
+	spi0_read_data(buf, sector, count);
+
+	return count;
+}
+
 /*****************************************************************************/
 
 static int spl_spi_load_image(struct spl_image_info *spl_image,
 			      struct spl_boot_device *bootdev)
 {
-	int err;
+	int ret = 0;
 	struct image_header *header;
 	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
 
 	spi0_init();
 
 	spi0_read_data((void *)header, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40);
-	err = spl_parse_image_header(spl_image, header);
-	if (err)
-		return err;
 
-	spi0_read_data((void *)spl_image->load_addr, CONFIG_SYS_SPI_U_BOOT_OFFS,
-		       spl_image->size);
+        if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
+		image_get_magic(header) == FDT_MAGIC) {
+		struct spl_load_info load;
+
+		debug("Found FIT image\n");
+		load.dev = NULL;
+		load.priv = NULL;
+		load.filename = NULL;
+		load.bl_len = 1;
+		load.read = spi_load_read;
+		ret = spl_load_simple_fit(spl_image, &load,
+					  CONFIG_SYS_SPI_U_BOOT_OFFS, header);
+	} else {
+		ret = spl_parse_image_header(spl_image, header);
+		if (ret)
+			return ret;
+
+		spi0_read_data((void *)spl_image->load_addr,
+			       CONFIG_SYS_SPI_U_BOOT_OFFS, spl_image->size);
+	}
 
 	spi0_deinit();
-	return 0;
+
+	return ret;
 }
 /* Use priorty 0 to override the default if it happens to be linked in */
 SPL_LOAD_IMAGE_METHOD("sunxi SPI", 0, BOOT_DEVICE_SPI, spl_spi_load_image);