phy: marvell: Support changing SERDES map in board file

This adds a weak definition of comphy_update_map to comphy_core,
which does nothing. If this function is defined elsewhere, for example
in board file, the board file can change some parameters of SERDES
configuration.

This is needed on Turris Mox, where the SERDES speed on lane 1 has to
be set differently when SFP module is connected and when Topaz Switch
module is connected.

This is a temporary solution. When the comphy driver for armada-3720
will be added to the kernel, the comphy driver in u-boot shall also be
updated and this should be done differently then.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Signed-off-by: Stefan Roese <sr@denx.de>

5 files changed, 18 insertions, 16 deletions

diff --git a/drivers/phy/marvell/comphy_a3700.h b/drivers/phy/marvell/comphy_a3700.h
index a14767d809b..b0941ffb37f 100644
--- a/drivers/phy/marvell/comphy_a3700.h
+++ b/drivers/phy/marvell/comphy_a3700.h
@@ -6,7 +6,7 @@
 #ifndef _COMPHY_A3700_H_
 #define _COMPHY_A3700_H_
 
-#include "comphy.h"
+#include "comphy_core.h"
 #include "comphy_hpipe.h"
 
 #define MVEBU_REG(offs)			\
diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c
index c6e2cc8897e..9c24692629b 100644
--- a/drivers/phy/marvell/comphy_core.c
+++ b/drivers/phy/marvell/comphy_core.c
@@ -11,7 +11,7 @@
 #include <linux/errno.h>
 #include <asm/io.h>
 
-#include "comphy.h"
+#include "comphy_core.h"
 
 #define COMPHY_MAX_CHIP 4
 
@@ -66,6 +66,11 @@ void comphy_print(struct chip_serdes_phy_config *chip_cfg,
 	}
 }
 
+__weak int comphy_update_map(struct comphy_map *serdes_map, int count)
+{
+	return 0;
+}
+
 static int comphy_probe(struct udevice *dev)
 {
 	const void *blob = gd->fdt_blob;
@@ -76,6 +81,7 @@ static int comphy_probe(struct udevice *dev)
 	int lane;
 	int last_idx = 0;
 	static int current_idx;
+	int res;
 
 	/* Save base addresses for later use */
 	chip_cfg->comphy_base_addr = (void *)devfdt_get_addr_index(dev, 0);
@@ -143,6 +149,10 @@ static int comphy_probe(struct udevice *dev)
 		lane++;
 	}
 
+	res = comphy_update_map(comphy_map_data, chip_cfg->comphy_lanes_count);
+	if (res < 0)
+		return res;
+
 	/* Save CP index for MultiCP devices (A8K) */
 	chip_cfg->cp_index = current_idx++;
 	/* PHY power UP sequence */
diff --git a/drivers/phy/marvell/comphy.h b/drivers/phy/marvell/comphy_core.h
index b588ae41f00..12ab921d24c 100644
--- a/drivers/phy/marvell/comphy.h
+++ b/drivers/phy/marvell/comphy_core.h
@@ -3,11 +3,11 @@
  * Copyright (C) 2015-2016 Marvell International Ltd.
  */
 
-#ifndef _COMPHY_H_
-#define _COMPHY_H_
+#ifndef _COMPHY_CORE_H_
+#define _COMPHY_CORE_H_
 
-#include <dt-bindings/comphy/comphy_data.h>
 #include <fdtdec.h>
+#include <mvebu/comphy.h>
 
 #if defined(DEBUG)
 #define debug_enter()	printf("----> Enter %s\n", __func__);
@@ -80,14 +80,6 @@ struct comphy_mux_data {
 	struct comphy_mux_options mux_values[MAX_LANE_OPTIONS];
 };
 
-struct comphy_map {
-	u32 type;
-	u32 speed;
-	u32 invert;
-	bool clk_src;
-	bool end_point;
-};
-
 struct chip_serdes_phy_config {
 	struct comphy_mux_data *mux_data;
 	int (*ptr_comphy_chip_init)(struct chip_serdes_phy_config *,
@@ -183,5 +175,5 @@ void comphy_pcie_config_detect(u32 comphy_max_count,
 			       struct comphy_map *serdes_map);
 void comphy_pcie_unit_general_config(u32 pex_index);
 
-#endif /* _COMPHY_H_ */
+#endif /* _COMPHY_CORE_H_ */
 
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index b0d5d5ca26b..6a60da3df06 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -9,7 +9,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 
-#include "comphy.h"
+#include "comphy_core.h"
 #include "comphy_hpipe.h"
 #include "sata.h"
 #include "utmi_phy.h"
diff --git a/drivers/phy/marvell/comphy_mux.c b/drivers/phy/marvell/comphy_mux.c
index 1f757d8e04f..c67ba997629 100644
--- a/drivers/phy/marvell/comphy_mux.c
+++ b/drivers/phy/marvell/comphy_mux.c
@@ -6,7 +6,7 @@
 #include <common.h>
 #include <asm/io.h>
 
-#include "comphy.h"
+#include "comphy_core.h"
 #include "comphy_hpipe.h"
 
 /*