diff options
author | Marek Vasut | 2020-04-12 23:12:11 +0200 |
---|---|---|
committer | marex | 2020-05-01 12:35:21 +0200 |
commit | 6ee6caaf035063dc376eeb3385f7f08f87549b1e (patch) | |
tree | a879b510843d6f7a6da4d24785e52f14268982dc /drivers | |
parent | 0e5a4117a58b8d47b502d7e5536ca6b36d568806 (diff) |
net: rtl8139: Move functions around
Just move functions around in preparation for easy DM conversion,
rename rtl_bcast_addr() to rtl8139_bcast_addr(), no functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/rtl8139.c | 179 |
1 files changed, 87 insertions, 92 deletions
diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c index b901e3a79b7..66591d03cec 100644 --- a/drivers/net/rtl8139.c +++ b/drivers/net/rtl8139.c @@ -190,104 +190,13 @@ #define RTL_STS_RXBADALIGN BIT(1) #define RTL_STS_RXSTATUSOK BIT(0) -static int ioaddr; static unsigned int cur_rx, cur_tx; +static int ioaddr; /* The RTL8139 can only transmit from a contiguous, aligned memory block. */ static unsigned char tx_buffer[TX_BUF_SIZE] __aligned(4); static unsigned char rx_ring[RX_BUF_LEN + 16] __aligned(4); -static int rtl8139_init(struct eth_device *dev, bd_t *bis); -static int rtl8139_read_eeprom(unsigned int location, unsigned int addr_len); -static void rtl8139_reset(struct eth_device *dev); -static int rtl8139_send(struct eth_device *dev, void *packet, int length); -static int rtl8139_recv(struct eth_device *dev); -static void rtl8139_stop(struct eth_device *dev); -static int rtl_bcast_addr(struct eth_device *dev, const u8 *bcast_mac, int join) -{ - return 0; -} - -static struct pci_device_id supported[] = { - { PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139 }, - { PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139 }, - { } -}; - -int rtl8139_initialize(bd_t *bis) -{ - struct eth_device *dev; - int card_number = 0; - pci_dev_t devno; - int idx = 0; - u32 iobase; - - while (1) { - /* Find RTL8139 */ - devno = pci_find_devices(supported, idx++); - if (devno < 0) - break; - - pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); - iobase &= ~0xf; - - debug("rtl8139: REALTEK RTL8139 @0x%x\n", iobase); - - dev = (struct eth_device *)malloc(sizeof(*dev)); - if (!dev) { - printf("Can not allocate memory of rtl8139\n"); - break; - } - memset(dev, 0, sizeof(*dev)); - - sprintf(dev->name, "RTL8139#%d", card_number); - - dev->priv = (void *)devno; - dev->iobase = (int)bus_to_phys(iobase); - dev->init = rtl8139_init; - dev->halt = rtl8139_stop; - dev->send = rtl8139_send; - dev->recv = rtl8139_recv; - dev->mcast = rtl_bcast_addr; - - eth_register(dev); - - card_number++; - - pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20); - - udelay(10 * 1000); - } - - return card_number; -} - -static int rtl8139_init(struct eth_device *dev, bd_t *bis) -{ - unsigned short *ap = (unsigned short *)dev->enetaddr; - int addr_len, i; - u8 reg; - - ioaddr = dev->iobase; - - /* Bring the chip out of low-power mode. */ - outb(0x00, ioaddr + RTL_REG_CONFIG1); - - addr_len = rtl8139_read_eeprom(0, 8) == 0x8129 ? 8 : 6; - for (i = 0; i < 3; i++) - *ap++ = le16_to_cpu(rtl8139_read_eeprom(i + 7, addr_len)); - - rtl8139_reset(dev); - - reg = inb(ioaddr + RTL_REG_MEDIASTATUS); - if (reg & RTL_REG_MEDIASTATUS_MSRLINKFAIL) { - printf("Cable not connected or other link failure\n"); - return -1; - } - - return 0; -} - /* Serial EEPROM section. */ /* EEPROM_Ctrl bits. */ @@ -575,9 +484,95 @@ static int rtl8139_recv(struct eth_device *dev) return length; } +static int rtl8139_init(struct eth_device *dev, bd_t *bis) +{ + unsigned short *ap = (unsigned short *)dev->enetaddr; + int addr_len, i; + u8 reg; + + ioaddr = dev->iobase; + + /* Bring the chip out of low-power mode. */ + outb(0x00, ioaddr + RTL_REG_CONFIG1); + + addr_len = rtl8139_read_eeprom(0, 8) == 0x8129 ? 8 : 6; + for (i = 0; i < 3; i++) + *ap++ = le16_to_cpu(rtl8139_read_eeprom(i + 7, addr_len)); + + rtl8139_reset(dev); + + reg = inb(ioaddr + RTL_REG_MEDIASTATUS); + if (reg & RTL_REG_MEDIASTATUS_MSRLINKFAIL) { + printf("Cable not connected or other link failure\n"); + return -1; + } + + return 0; +} + static void rtl8139_stop(struct eth_device *dev) { ioaddr = dev->iobase; rtl8139_hw_reset(dev); } + +static int rtl8139_bcast_addr(struct eth_device *dev, const u8 *bcast_mac, + int join) +{ + return 0; +} + +static struct pci_device_id supported[] = { + { PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139 }, + { PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139 }, + { } +}; + +int rtl8139_initialize(bd_t *bis) +{ + struct eth_device *dev; + int card_number = 0; + pci_dev_t devno; + int idx = 0; + u32 iobase; + + while (1) { + /* Find RTL8139 */ + devno = pci_find_devices(supported, idx++); + if (devno < 0) + break; + + pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); + iobase &= ~0xf; + + debug("rtl8139: REALTEK RTL8139 @0x%x\n", iobase); + + dev = (struct eth_device *)malloc(sizeof(*dev)); + if (!dev) { + printf("Can not allocate memory of rtl8139\n"); + break; + } + memset(dev, 0, sizeof(*dev)); + + sprintf(dev->name, "RTL8139#%d", card_number); + + dev->priv = (void *)devno; + dev->iobase = (int)bus_to_phys(iobase); + dev->init = rtl8139_init; + dev->halt = rtl8139_stop; + dev->send = rtl8139_send; + dev->recv = rtl8139_recv; + dev->mcast = rtl8139_bcast_addr; + + eth_register(dev); + + card_number++; + + pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20); + + udelay(10 * 1000); + } + + return card_number; +} |