spi: mtk_spim: add support for upstream mediatek, spi-ipm compatible

Upstream kernel linux use a different compatible mediatek,spi-ipm.

Add support for this compatible and add handling for the additional
clock similar to how it's done by the upstream driver and handling for
all the property enabled by default.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

1 files changed, 43 insertions, 2 deletions

diff --git a/drivers/spi/mtk_spim.c b/drivers/spi/mtk_spim.c
index 90f4c3cecb9..b360eca2b91 100644
--- a/drivers/spi/mtk_spim.c
+++ b/drivers/spi/mtk_spim.c
@@ -137,6 +137,8 @@ struct mtk_spim_capability {
  * @state:		Controller state
  * @sel_clk:		Pad clock
  * @spi_clk:		Core clock
+ * @parent_clk:		Parent clock (needed for mediatek,spi-ipm, upstream DTSI)
+ * @hclk:		HCLK clock (needed for mediatek,spi-ipm, upstream DTSI)
  * @pll_clk_rate:	Controller's PLL source clock rate, which is different
  *			from SPI bus clock rate
  * @xfer_len:		Current length of data for transfer
@@ -151,6 +153,7 @@ struct mtk_spim_priv {
 	void __iomem *base;
 	u32 state;
 	struct clk sel_clk, spi_clk;
+	struct clk parent_clk, hclk;
 	u32 pll_clk_rate;
 	u32 xfer_len;
 	struct mtk_spim_capability hw_cap;
@@ -650,7 +653,21 @@ static int mtk_spim_probe(struct udevice *dev)
 	if (!priv->base)
 		return -EINVAL;
 
-	mtk_spim_get_attr(priv, dev);
+	/*
+	 * Upstream linux driver for ipm design enable all the modes
+	 * and setup the calibrarion values directly in the driver with
+	 * standard values.
+	 */
+	if (device_is_compatible(dev, "mediatek,spi-ipm")) {
+		priv->hw_cap.enhance_timing = true;
+		priv->hw_cap.dma_ext = true;
+		priv->hw_cap.ipm_design = true;
+		priv->hw_cap.support_quad = true;
+		priv->sample_sel = 0;
+		priv->tick_dly = 2;
+	} else {
+		mtk_spim_get_attr(priv, dev);
+	}
 
 	ret = clk_get_by_name(dev, "sel-clk", &priv->sel_clk);
 	if (ret < 0) {
@@ -664,8 +681,31 @@ static int mtk_spim_probe(struct udevice *dev)
 		return ret;
 	}
 
-	clk_enable(&priv->sel_clk);
+	/*
+	 * Upstream DTSI use a different compatible that provide additional
+	 * clock instead of the assigned-clock implementation.
+	 */
+	if (device_is_compatible(dev, "mediatek,spi-ipm")) {
+		ret = clk_get_by_name(dev, "parent-clk", &priv->parent_clk);
+		if (ret < 0) {
+			dev_err(dev, "failed to get parent-clk\n");
+			return ret;
+		}
+
+		ret = clk_get_by_name(dev, "hclk", &priv->hclk);
+		if (ret < 0) {
+			dev_err(dev, "failed to get hclk\n");
+			return ret;
+		}
+
+		clk_enable(&priv->parent_clk);
+		clk_set_parent(&priv->sel_clk, &priv->parent_clk);
+
+		clk_enable(&priv->hclk);
+	}
+
 	clk_enable(&priv->spi_clk);
+	clk_enable(&priv->sel_clk);
 
 	priv->pll_clk_rate = clk_get_rate(&priv->spi_clk);
 	if (priv->pll_clk_rate == 0)
@@ -698,6 +738,7 @@ static const struct dm_spi_ops mtk_spim_ops = {
 
 static const struct udevice_id mtk_spim_ids[] = {
 	{ .compatible = "mediatek,ipm-spi" },
+	{ .compatible = "mediatek,spi-ipm", },
 	{}
 };