Merge branch '2019-07-26-ti-imports'

- Bring in the rest of the J271E platform
- Various OMAP3/AM3517, DA850 fixes

8 files changed, 626 insertions, 139 deletions

diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 303aa6a6311..1fd29f2cdf5 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -87,11 +87,18 @@ struct ti_sci_info {
 	struct mbox_chan chan_notify;
 	struct ti_sci_xfer xfer;
 	struct list_head list;
+	struct list_head dev_list;
 	bool is_secure;
 	u8 host_id;
 	u8 seq;
 };
 
+struct ti_sci_exclusive_dev {
+	u32 id;
+	u32 count;
+	struct list_head list;
+};
+
 #define handle_to_ti_sci_info(h) container_of(h, struct ti_sci_info, handle)
 
 /**
@@ -101,7 +108,8 @@ struct ti_sci_info {
  * @msg_flags:	Flag to set for the message
  * @buf:	Buffer to be send to mailbox channel
  * @tx_message_size: transmit message size
- * @rx_message_size: receive message size
+ * @rx_message_size: receive message size. may be set to zero for send-only
+ *		     transactions.
  *
  * Helper function which is used by various command functions that are
  * exposed to clients of this driver for allocating a message traffic event.
@@ -121,7 +129,8 @@ static struct ti_sci_xfer *ti_sci_setup_one_xfer(struct ti_sci_info *info,
 	/* Ensure we have sane transfer sizes */
 	if (rx_message_size > info->desc->max_msg_size ||
 	    tx_message_size > info->desc->max_msg_size ||
-	    rx_message_size < sizeof(*hdr) || tx_message_size < sizeof(*hdr))
+	    (rx_message_size > 0 && rx_message_size < sizeof(*hdr)) ||
+	    tx_message_size < sizeof(*hdr))
 		return ERR_PTR(-ERANGE);
 
 	info->seq = ~info->seq;
@@ -219,7 +228,9 @@ static inline int ti_sci_do_xfer(struct ti_sci_info *info,
 
 		xfer->tx_message.buf = (u32 *)secure_buf;
 		xfer->tx_message.len += sizeof(secure_hdr);
-		xfer->rx_len += sizeof(secure_hdr);
+
+		if (xfer->rx_len)
+			xfer->rx_len += sizeof(secure_hdr);
 	}
 
 	/* Send the message */
@@ -230,7 +241,11 @@ static inline int ti_sci_do_xfer(struct ti_sci_info *info,
 		return ret;
 	}
 
-	return ti_sci_get_response(info, xfer, &info->chan_rx);
+	/* Get response if requested */
+	if (xfer->rx_len)
+		ret = ti_sci_get_response(info, xfer, &info->chan_rx);
+
+	return ret;
 }
 
 /**
@@ -419,6 +434,47 @@ static int ti_sci_cmd_set_board_config_pm(const struct ti_sci_handle *handle,
 					      addr, size);
 }
 
+static struct ti_sci_exclusive_dev
+*ti_sci_get_exclusive_dev(struct list_head *dev_list, u32 id)
+{
+	struct ti_sci_exclusive_dev *dev;
+
+	list_for_each_entry(dev, dev_list, list)
+		if (dev->id == id)
+			return dev;
+
+	return NULL;
+}
+
+static void ti_sci_add_exclusive_dev(struct ti_sci_info *info, u32 id)
+{
+	struct ti_sci_exclusive_dev *dev;
+
+	dev = ti_sci_get_exclusive_dev(&info->dev_list, id);
+	if (dev) {
+		dev->count++;
+		return;
+	}
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	dev->id = id;
+	dev->count = 1;
+	INIT_LIST_HEAD(&dev->list);
+	list_add_tail(&dev->list, &info->dev_list);
+}
+
+static void ti_sci_delete_exclusive_dev(struct ti_sci_info *info, u32 id)
+{
+	struct ti_sci_exclusive_dev *dev;
+
+	dev = ti_sci_get_exclusive_dev(&info->dev_list, id);
+	if (!dev)
+		return;
+
+	if (dev->count > 0)
+		dev->count--;
+}
+
 /**
  * ti_sci_set_device_state() - Set device state helper
  * @handle:	pointer to TI SCI handle
@@ -466,6 +522,54 @@ static int ti_sci_set_device_state(const struct ti_sci_handle *handle,
 	if (!ti_sci_is_response_ack(resp))
 		return -ENODEV;
 
+	if (state == MSG_DEVICE_SW_STATE_AUTO_OFF)
+		ti_sci_delete_exclusive_dev(info, id);
+	else if (flags & MSG_FLAG_DEVICE_EXCLUSIVE)
+		ti_sci_add_exclusive_dev(info, id);
+
+	return ret;
+}
+
+/**
+ * ti_sci_set_device_state_no_wait() - Set device state helper without
+ *				       requesting or waiting for a response.
+ * @handle:	pointer to TI SCI handle
+ * @id:		Device identifier
+ * @flags:	flags to setup for the device
+ * @state:	State to move the device to
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_set_device_state_no_wait(const struct ti_sci_handle *handle,
+					   u32 id, u32 flags, u8 state)
+{
+	struct ti_sci_msg_req_set_device_state req;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TI_SCI_MSG_SET_DEVICE_STATE,
+				     flags | TI_SCI_FLAG_REQ_GENERIC_NORESPONSE,
+				     (u32 *)&req, sizeof(req), 0);
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.id = id;
+	req.state = state;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret)
+		dev_err(info->dev, "Mbox send fail %d\n", ret);
+
 	return ret;
 }
 
@@ -547,8 +651,14 @@ static int ti_sci_get_device_state(const struct ti_sci_handle *handle,
  */
 static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id)
 {
-	return ti_sci_set_device_state(handle, id,
-				       MSG_FLAG_DEVICE_EXCLUSIVE,
+	return ti_sci_set_device_state(handle, id, 0,
+				       MSG_DEVICE_SW_STATE_ON);
+}
+
+static int ti_sci_cmd_get_device_exclusive(const struct ti_sci_handle *handle,
+					   u32 id)
+{
+	return ti_sci_set_device_state(handle, id, MSG_FLAG_DEVICE_EXCLUSIVE,
 				       MSG_DEVICE_SW_STATE_ON);
 }
 
@@ -566,7 +676,14 @@ static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id)
 static int ti_sci_cmd_idle_device(const struct ti_sci_handle *handle, u32 id)
 {
 	return ti_sci_set_device_state(handle, id,
-				       MSG_FLAG_DEVICE_EXCLUSIVE,
+				       0,
+				       MSG_DEVICE_SW_STATE_RETENTION);
+}
+
+static int ti_sci_cmd_idle_device_exclusive(const struct ti_sci_handle *handle,
+					    u32 id)
+{
+	return ti_sci_set_device_state(handle, id, MSG_FLAG_DEVICE_EXCLUSIVE,
 				       MSG_DEVICE_SW_STATE_RETENTION);
 }
 
@@ -583,8 +700,27 @@ static int ti_sci_cmd_idle_device(const struct ti_sci_handle *handle, u32 id)
  */
 static int ti_sci_cmd_put_device(const struct ti_sci_handle *handle, u32 id)
 {
-	return ti_sci_set_device_state(handle, id,
-				       0, MSG_DEVICE_SW_STATE_AUTO_OFF);
+	return ti_sci_set_device_state(handle, id, 0,
+				       MSG_DEVICE_SW_STATE_AUTO_OFF);
+}
+
+static
+int ti_sci_cmd_release_exclusive_devices(const struct ti_sci_handle *handle)
+{
+	struct ti_sci_exclusive_dev *dev, *tmp;
+	struct ti_sci_info *info;
+	int i, cnt;
+
+	info = handle_to_ti_sci_info(handle);
+
+	list_for_each_entry_safe(dev, tmp, &info->dev_list, list) {
+		cnt = dev->count;
+		debug("%s: id = %d, cnt = %d\n", __func__, dev->id, cnt);
+		for (i = 0; i < cnt; i++)
+			ti_sci_cmd_put_device(handle, dev->id);
+	}
+
+	return 0;
 }
 
 /**
@@ -2027,6 +2163,137 @@ static int ti_sci_cmd_get_proc_boot_status(const struct ti_sci_handle *handle,
 }
 
 /**
+ * ti_sci_proc_wait_boot_status_no_wait() - Helper function to wait for a
+ *				processor boot status without requesting or
+ *				waiting for a response.
+ * @proc_id:			Processor ID this request is for
+ * @num_wait_iterations:	Total number of iterations we will check before
+ *				we will timeout and give up
+ * @num_match_iterations:	How many iterations should we have continued
+ *				status to account for status bits glitching.
+ *				This is to make sure that match occurs for
+ *				consecutive checks. This implies that the
+ *				worst case should consider that the stable
+ *				time should at the worst be num_wait_iterations
+ *				num_match_iterations to prevent timeout.
+ * @delay_per_iteration_us:	Specifies how long to wait (in micro seconds)
+ *				between each status checks. This is the minimum
+ *				duration, and overhead of register reads and
+ *				checks are on top of this and can vary based on
+ *				varied conditions.
+ * @delay_before_iterations_us:	Specifies how long to wait (in micro seconds)
+ *				before the very first check in the first
+ *				iteration of status check loop. This is the
+ *				minimum duration, and overhead of register
+ *				reads and checks are.
+ * @status_flags_1_set_all_wait:If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 1.
+ * @status_flags_1_set_any_wait:If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 1.
+ * @status_flags_1_clr_all_wait:If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 0.
+ * @status_flags_1_clr_any_wait:If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 0.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static int
+ti_sci_proc_wait_boot_status_no_wait(const struct ti_sci_handle *handle,
+				     u8 proc_id,
+				     u8 num_wait_iterations,
+				     u8 num_match_iterations,
+				     u8 delay_per_iteration_us,
+				     u8 delay_before_iterations_us,
+				     u32 status_flags_1_set_all_wait,
+				     u32 status_flags_1_set_any_wait,
+				     u32 status_flags_1_clr_all_wait,
+				     u32 status_flags_1_clr_any_wait)
+{
+	struct ti_sci_msg_req_wait_proc_boot_status req;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+
+	xfer = ti_sci_setup_one_xfer(info, TISCI_MSG_WAIT_PROC_BOOT_STATUS,
+				     TI_SCI_FLAG_REQ_GENERIC_NORESPONSE,
+				     (u32 *)&req, sizeof(req), 0);
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(info->dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req.processor_id = proc_id;
+	req.num_wait_iterations = num_wait_iterations;
+	req.num_match_iterations = num_match_iterations;
+	req.delay_per_iteration_us = delay_per_iteration_us;
+	req.delay_before_iterations_us = delay_before_iterations_us;
+	req.status_flags_1_set_all_wait = status_flags_1_set_all_wait;
+	req.status_flags_1_set_any_wait = status_flags_1_set_any_wait;
+	req.status_flags_1_clr_all_wait = status_flags_1_clr_all_wait;
+	req.status_flags_1_clr_any_wait = status_flags_1_clr_any_wait;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret)
+		dev_err(info->dev, "Mbox send fail %d\n", ret);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_shutdown_no_wait() - Command to shutdown a core without
+ *		requesting or waiting for a response. Note that this API call
+ *		should be followed by placing the respective processor into
+ *		either WFE or WFI mode.
+ * @handle:	Pointer to TI SCI handle
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_shutdown_no_wait(const struct ti_sci_handle *handle,
+					    u8 proc_id)
+{
+	int ret;
+
+	/*
+	 * Send the core boot status wait message waiting for either WFE or
+	 * WFI without requesting or waiting for a TISCI response with the
+	 * maximum wait time to give us the best chance to get to the WFE/WFI
+	 * command that should follow the invocation of this API before the
+	 * DMSC-internal processing of this command times out. Note that
+	 * waiting for the R5 WFE/WFI flags will also work on an ARMV8 type
+	 * core as the related flag bit positions are the same.
+	 */
+	ret = ti_sci_proc_wait_boot_status_no_wait(handle, proc_id,
+		U8_MAX, 100, U8_MAX, U8_MAX,
+		0, PROC_BOOT_STATUS_FLAG_R5_WFE | PROC_BOOT_STATUS_FLAG_R5_WFI,
+		0, 0);
+	if (ret) {
+		dev_err(info->dev, "Sending core %u wait message fail %d\n",
+			proc_id, ret);
+		return ret;
+	}
+
+	/*
+	 * Release a processor managed by TISCI without requesting or waiting
+	 * for a response.
+	 */
+	ret = ti_sci_set_device_state_no_wait(handle, proc_id, 0,
+					      MSG_DEVICE_SW_STATE_AUTO_OFF);
+	if (ret)
+		dev_err(info->dev, "Sending core %u shutdown message fail %d\n",
+			proc_id, ret);
+
+	return ret;
+}
+
+/**
  * ti_sci_cmd_ring_config() - configure RA ring
  * @handle:	pointer to TI SCI handle
  * @valid_params: Bitfield defining validity of ring configuration parameters.
@@ -2632,7 +2899,9 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
 	bops->board_config_pm = ti_sci_cmd_set_board_config_pm;
 
 	dops->get_device = ti_sci_cmd_get_device;
+	dops->get_device_exclusive = ti_sci_cmd_get_device_exclusive;
 	dops->idle_device = ti_sci_cmd_idle_device;
+	dops->idle_device_exclusive = ti_sci_cmd_idle_device_exclusive;
 	dops->put_device = ti_sci_cmd_put_device;
 	dops->is_valid = ti_sci_cmd_dev_is_valid;
 	dops->get_context_loss_count = ti_sci_cmd_dev_get_clcnt;
@@ -2642,6 +2911,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
 	dops->is_transitioning = ti_sci_cmd_dev_is_trans;
 	dops->set_device_resets = ti_sci_cmd_set_device_resets;
 	dops->get_device_resets = ti_sci_cmd_get_device_resets;
+	dops->release_exclusive_devices = ti_sci_cmd_release_exclusive_devices;
 
 	cops->get_clock = ti_sci_cmd_get_clock;
 	cops->idle_clock = ti_sci_cmd_idle_clock;
@@ -2672,6 +2942,7 @@ static void ti_sci_setup_ops(struct ti_sci_info *info)
 	pops->set_proc_boot_ctrl = ti_sci_cmd_set_proc_boot_ctrl;
 	pops->proc_auth_boot_image = ti_sci_cmd_proc_auth_boot_image;
 	pops->get_proc_boot_status = ti_sci_cmd_get_proc_boot_status;
+	pops->proc_shutdown_no_wait = ti_sci_cmd_proc_shutdown_no_wait;
 
 	rops->config = ti_sci_cmd_ring_config;
 	rops->get_config = ti_sci_cmd_ring_get_config;
@@ -2835,6 +3106,8 @@ static int ti_sci_probe(struct udevice *dev)
 
 	ret = ti_sci_cmd_get_revision(&info->handle);
 
+	INIT_LIST_HEAD(&info->dev_list);
+
 	return ret;
 }
 
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
index a484b1fa408..69ff74d6a95 100644
--- a/drivers/firmware/ti_sci.h
+++ b/drivers/firmware/ti_sci.h
@@ -50,6 +50,7 @@
 #define TISCI_MSG_SET_PROC_BOOT_CTRL	0xc101
 #define TISCI_MSG_PROC_AUTH_BOOT_IMIAGE	0xc120
 #define TISCI_MSG_GET_PROC_BOOT_STATUS	0xc400
+#define TISCI_MSG_WAIT_PROC_BOOT_STATUS	0xc401
 
 /* Resource Management Requests */
 #define TI_SCI_MSG_GET_RESOURCE_RANGE	0x1500
@@ -773,6 +774,55 @@ struct ti_sci_msg_resp_get_proc_boot_status {
 } __packed;
 
 /**
+ * struct ti_sci_msg_req_wait_proc_boot_status - Wait for a processor
+ *						 boot status
+ * @hdr:			Generic Header
+ * @processor_id:		ID of processor
+ * @num_wait_iterations:	Total number of iterations we will check before
+ *				we will timeout and give up
+ * @num_match_iterations:	How many iterations should we have continued
+ *				status to account for status bits glitching.
+ *				This is to make sure that match occurs for
+ *				consecutive checks. This implies that the
+ *				worst case should consider that the stable
+ *				time should at the worst be num_wait_iterations
+ *				num_match_iterations to prevent timeout.
+ * @delay_per_iteration_us:	Specifies how long to wait (in micro seconds)
+ *				between each status checks. This is the minimum
+ *				duration, and overhead of register reads and
+ *				checks are on top of this and can vary based on
+ *				varied conditions.
+ * @delay_before_iterations_us:	Specifies how long to wait (in micro seconds)
+ *				before the very first check in the first
+ *				iteration of status check loop. This is the
+ *				minimum duration, and overhead of register
+ *				reads and checks are.
+ * @status_flags_1_set_all_wait:If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 1.
+ * @status_flags_1_set_any_wait:If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 1.
+ * @status_flags_1_clr_all_wait:If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 0.
+ * @status_flags_1_clr_any_wait:If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 0.
+ *
+ * Request type is TISCI_MSG_WAIT_PROC_BOOT_STATUS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_wait_proc_boot_status {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+	u8 num_wait_iterations;
+	u8 num_match_iterations;
+	u8 delay_per_iteration_us;
+	u8 delay_before_iterations_us;
+	u32 status_flags_1_set_all_wait;
+	u32 status_flags_1_set_any_wait;
+	u32 status_flags_1_clr_all_wait;
+	u32 status_flags_1_clr_any_wait;
+} __packed;
+
+/**
  * struct ti_sci_msg_rm_ring_cfg_req - Configure a Navigator Subsystem ring
  *
  * Configures the non-real-time registers of a Navigator Subsystem ring.
diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c
index fb0fb580706..1793a3f99a5 100644
--- a/drivers/mmc/am654_sdhci.c
+++ b/drivers/mmc/am654_sdhci.c
@@ -72,6 +72,8 @@ struct am654_sdhci_plat {
 	u32 otap_del_sel;
 	u32 trm_icp;
 	u32 drv_strength;
+	u32 flags;
+#define DLL_PRESENT	(1 << 0)
 	bool dll_on;
 };
 
@@ -162,6 +164,10 @@ const struct sdhci_ops am654_sdhci_ops = {
 	.set_control_reg	= &am654_sdhci_set_control_reg,
 };
 
+const struct sdhci_ops j721e_4bit_sdhci_ops = {
+	.set_control_reg	= &am654_sdhci_set_control_reg,
+};
+
 int am654_sdhci_init(struct am654_sdhci_plat *plat)
 {
 	u32 ctl_cfg_2 = 0;
@@ -172,24 +178,28 @@ int am654_sdhci_init(struct am654_sdhci_plat *plat)
 	mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
 	regmap_update_bits(plat->base, PHY_CTRL4, mask, 0x0);
 
-	regmap_read(plat->base, PHY_STAT1, &val);
-	if (~val & CALDONE_MASK) {
-		/* Calibrate IO lines */
-		regmap_update_bits(plat->base, PHY_CTRL1, PDB_MASK, PDB_MASK);
-		ret = regmap_read_poll_timeout(plat->base, PHY_STAT1, val,
-					       val & CALDONE_MASK, 1, 20);
-		if (ret)
-			return ret;
-	}
+	if (plat->flags & DLL_PRESENT) {
+		regmap_read(plat->base, PHY_STAT1, &val);
+		if (~val & CALDONE_MASK) {
+			/* Calibrate IO lines */
+			regmap_update_bits(plat->base, PHY_CTRL1, PDB_MASK,
+					   PDB_MASK);
+			ret = regmap_read_poll_timeout(plat->base, PHY_STAT1,
+						       val, val & CALDONE_MASK,
+						       1, 20);
+			if (ret)
+				return ret;
+		}
 
-	/* Configure DLL TRIM */
-	mask = DLL_TRIM_ICP_MASK;
-	val = plat->trm_icp << DLL_TRIM_ICP_SHIFT;
+		/* Configure DLL TRIM */
+		mask = DLL_TRIM_ICP_MASK;
+		val = plat->trm_icp << DLL_TRIM_ICP_SHIFT;
 
-	/* Configure DLL driver strength */
-	mask |= DR_TY_MASK;
-	val |= plat->drv_strength << DR_TY_SHIFT;
-	regmap_update_bits(plat->base, PHY_CTRL1, mask, val);
+		/* Configure DLL driver strength */
+		mask |= DR_TY_MASK;
+		val |= plat->drv_strength << DR_TY_SHIFT;
+		regmap_update_bits(plat->base, PHY_CTRL1, mask, val);
+	}
 
 	/* Enable pins by setting IO mux to 0 */
 	regmap_update_bits(plat->base, PHY_CTRL1, IOMUX_ENABLE_MASK, 0);
@@ -245,7 +255,7 @@ static int am654_sdhci_probe(struct udevice *dev)
 			      AM654_SDHCI_MIN_FREQ);
 	if (ret)
 		return ret;
-	host->ops = &am654_sdhci_ops;
+	host->ops = (struct sdhci_ops *)dev_get_driver_data(dev);
 	host->mmc->priv = host;
 	upriv->mmc = host->mmc;
 
@@ -268,37 +278,44 @@ static int am654_sdhci_ofdata_to_platdata(struct udevice *dev)
 	host->ioaddr = (void *)dev_read_addr(dev);
 	plat->non_removable = dev_read_bool(dev, "non-removable");
 
-	ret = dev_read_u32(dev, "ti,trm-icp", &plat->trm_icp);
-	if (ret)
-		return ret;
+	if (device_is_compatible(dev, "ti,am654-sdhci-5.1") ||
+	    device_is_compatible(dev, "ti,j721e-sdhci-8bit"))
+		plat->flags |= DLL_PRESENT;
 
 	ret = dev_read_u32(dev, "ti,otap-del-sel", &plat->otap_del_sel);
 	if (ret)
 		return ret;
 
-	ret = dev_read_u32(dev, "ti,driver-strength-ohm", &drv_strength);
-	if (ret)
-		return ret;
+	if (plat->flags & DLL_PRESENT) {
+		ret = dev_read_u32(dev, "ti,trm-icp", &plat->trm_icp);
+		if (ret)
+			return ret;
+
+		ret = dev_read_u32(dev, "ti,driver-strength-ohm",
+				   &drv_strength);
+		if (ret)
+			return ret;
 
-	switch (drv_strength) {
-	case 50:
-		plat->drv_strength = DRIVER_STRENGTH_50_OHM;
-		break;
-	case 33:
-		plat->drv_strength = DRIVER_STRENGTH_33_OHM;
-		break;
-	case 66:
-		plat->drv_strength = DRIVER_STRENGTH_66_OHM;
-		break;
-	case 100:
-		plat->drv_strength = DRIVER_STRENGTH_100_OHM;
-		break;
-	case 40:
-		plat->drv_strength = DRIVER_STRENGTH_40_OHM;
-		break;
-	default:
-		dev_err(dev, "Invalid driver strength\n");
-		return -EINVAL;
+		switch (drv_strength) {
+		case 50:
+			plat->drv_strength = DRIVER_STRENGTH_50_OHM;
+			break;
+		case 33:
+			plat->drv_strength = DRIVER_STRENGTH_33_OHM;
+			break;
+		case 66:
+			plat->drv_strength = DRIVER_STRENGTH_66_OHM;
+			break;
+		case 100:
+			plat->drv_strength = DRIVER_STRENGTH_100_OHM;
+			break;
+		case 40:
+			plat->drv_strength = DRIVER_STRENGTH_40_OHM;
+			break;
+		default:
+			dev_err(dev, "Invalid driver strength\n");
+			return -EINVAL;
+		}
 	}
 
 	ret = mmc_of_parse(dev, cfg);
@@ -316,7 +333,18 @@ static int am654_sdhci_bind(struct udevice *dev)
 }
 
 static const struct udevice_id am654_sdhci_ids[] = {
-	{ .compatible = "ti,am654-sdhci-5.1" },
+	{
+		.compatible = "ti,am654-sdhci-5.1",
+		.data = (ulong)&am654_sdhci_ops,
+	},
+	{
+		.compatible = "ti,j721e-sdhci-8bit",
+		.data = (ulong)&am654_sdhci_ops,
+	},
+	{
+		.compatible = "ti,j721e-sdhci-4bit",
+		.data = (ulong)&j721e_4bit_sdhci_ops,
+	},
 	{ }
 };
 
diff --git a/drivers/power/domain/ti-sci-power-domain.c b/drivers/power/domain/ti-sci-power-domain.c
index aafde62cbf0..b9cd37b6129 100644
--- a/drivers/power/domain/ti-sci-power-domain.c
+++ b/drivers/power/domain/ti-sci-power-domain.c
@@ -13,6 +13,7 @@
 #include <errno.h>
 #include <power-domain-uclass.h>
 #include <linux/soc/ti/ti_sci_protocol.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
 
 /**
  * struct ti_sci_power_domain_data - pm domain controller information structure
@@ -56,11 +57,16 @@ static int ti_sci_power_domain_on(struct power_domain *pd)
 	struct ti_sci_power_domain_data *data = dev_get_priv(pd->dev);
 	const struct ti_sci_handle *sci = data->sci;
 	const struct ti_sci_dev_ops *dops = &sci->ops.dev_ops;
+	u8 flags = (uintptr_t)pd->priv;
 	int ret;
 
 	debug("%s(pd=%p)\n", __func__, pd);
 
-	ret = dops->get_device(sci, pd->id);
+	if (flags & TI_SCI_PD_EXCLUSIVE)
+		ret = dops->get_device_exclusive(sci, pd->id);
+	else
+		ret = dops->get_device(sci, pd->id);
+
 	if (ret)
 		dev_err(power_domain->dev, "%s: get_device failed (%d)\n",
 			__func__, ret);
@@ -85,6 +91,28 @@ static int ti_sci_power_domain_off(struct power_domain *pd)
 	return ret;
 }
 
+static int ti_sci_power_domain_of_xlate(struct power_domain *pd,
+					struct ofnode_phandle_args *args)
+{
+	u8 flags;
+
+	debug("%s(power_domain=%p)\n", __func__, pd);
+
+	if (args->args_count < 1) {
+		debug("Invalid args_count: %d\n", args->args_count);
+		return -EINVAL;
+	}
+
+	pd->id = args->args[0];
+	/* By default request for device exclusive */
+	flags = TI_SCI_PD_EXCLUSIVE;
+	if (args->args_count == 2)
+		flags = args->args[1] & TI_SCI_PD_EXCLUSIVE;
+	pd->priv = (void *)(uintptr_t)flags;
+
+	return 0;
+}
+
 static const struct udevice_id ti_sci_power_domain_of_match[] = {
 	{ .compatible = "ti,sci-pm-domain" },
 	{ /* sentinel */ }
@@ -95,6 +123,7 @@ static struct power_domain_ops ti_sci_power_domain_ops = {
 	.free = ti_sci_power_domain_free,
 	.on = ti_sci_power_domain_on,
 	.off = ti_sci_power_domain_off,
+	.of_xlate = ti_sci_power_domain_of_xlate,
 };
 
 U_BOOT_DRIVER(ti_sci_pm_domains) = {
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index fa6f1113e15..f54a245424a 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -22,15 +22,6 @@ config K3_SYSTEM_CONTROLLER
 	help
 	  Say 'y' here to add support for TI' K3 System Controller.
 
-config REMOTEPROC_K3
-	bool "Support for TI's K3 based remoteproc driver"
-	select REMOTEPROC
-	depends on DM
-	depends on ARCH_K3
-	depends on OF_CONTROL
-	help
-	  Say 'y' here to add support for TI' K3 remoteproc driver.
-
 config REMOTEPROC_SANDBOX
 	bool "Support for Test processor for Sandbox"
 	select REMOTEPROC
@@ -50,6 +41,17 @@ config REMOTEPROC_STM32_COPRO
 	  Say 'y' here to add support for STM32 Cortex-M4 coprocessors via the
 	  remoteproc framework.
 
+config REMOTEPROC_TI_K3_ARM64
+	bool "Support for TI's K3 based ARM64 remoteproc driver"
+	select REMOTEPROC
+	depends on DM
+	depends on ARCH_K3
+	depends on OF_CONTROL
+	help
+	  Say y here to support TI's ARM64 processor subsystems
+	  on various TI K3 family of SoCs through the remote processor
+	  framework.
+
 config REMOTEPROC_TI_POWER
 	bool "Support for TI Power processor"
 	select REMOTEPROC
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index b9a06acdef7..271ba55b093 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -8,7 +8,7 @@ obj-$(CONFIG_$(SPL_)REMOTEPROC) += rproc-uclass.o rproc-elf-loader.o
 
 # Remote proc drivers - Please keep this list alphabetically sorted.
 obj-$(CONFIG_K3_SYSTEM_CONTROLLER) += k3_system_controller.o
-obj-$(CONFIG_REMOTEPROC_K3) += k3_rproc.o
 obj-$(CONFIG_REMOTEPROC_SANDBOX) += sandbox_testproc.o
 obj-$(CONFIG_REMOTEPROC_STM32_COPRO) += stm32_copro.o
+obj-$(CONFIG_REMOTEPROC_TI_K3_ARM64) += ti_k3_arm64_rproc.o
 obj-$(CONFIG_REMOTEPROC_TI_POWER) += ti_power_proc.o
diff --git a/drivers/remoteproc/k3_rproc.c b/drivers/remoteproc/ti_k3_arm64_rproc.c
index 3c29d925ce0..9676a96f988 100644
--- a/drivers/remoteproc/k3_rproc.c
+++ b/drivers/remoteproc/ti_k3_arm64_rproc.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Texas Instruments' K3 Remoteproc driver
+ * Texas Instruments' K3 ARM64 Remoteproc driver
  *
  * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
  *	Lokesh Vutla <lokeshvutla@ti.com>
@@ -16,6 +16,7 @@
 #include <asm/io.h>
 #include <power-domain.h>
 #include <linux/soc/ti/ti_sci_protocol.h>
+#include "ti_sci_proc.h"
 
 #define INVALID_ID	0xffff
 
@@ -23,68 +24,53 @@
 #define GTC_CNTR_EN	0x3
 
 /**
- * struct k3_rproc_privdata - Structure representing Remote processor data.
+ * struct k3_arm64_privdata - Structure representing Remote processor data.
  * @rproc_pwrdmn:	rproc power domain data
  * @rproc_rst:		rproc reset control data
  * @sci:		Pointer to TISCI handle
+ * @tsp:		TISCI processor control helper structure
  * @gtc_base:		Timer base address.
- * @proc_id:		TISCI processor ID
- * @host_id:		TISCI host id to which the processor gets assigned to.
  */
-struct k3_rproc_privdata {
+struct k3_arm64_privdata {
 	struct power_domain rproc_pwrdmn;
 	struct power_domain gtc_pwrdmn;
 	struct reset_ctl rproc_rst;
-	const struct ti_sci_handle *sci;
+	struct ti_sci_proc tsp;
 	void *gtc_base;
-	u16 proc_id;
-	u16 host_id;
 };
 
 /**
- * k3_rproc_load() - Load up the Remote processor image
+ * k3_arm64_load() - Load up the Remote processor image
  * @dev:	rproc device pointer
  * @addr:	Address at which image is available
  * @size:	size of the image
  *
  * Return: 0 if all goes good, else appropriate error message.
  */
-static int k3_rproc_load(struct udevice *dev, ulong addr, ulong size)
+static int k3_arm64_load(struct udevice *dev, ulong addr, ulong size)
 {
-	struct k3_rproc_privdata *rproc = dev_get_priv(dev);
-	const struct ti_sci_proc_ops *pops = &rproc->sci->ops.proc_ops;
+	struct k3_arm64_privdata *rproc = dev_get_priv(dev);
 	int ret;
 
 	dev_dbg(dev, "%s addr = 0x%lx, size = 0x%lx\n", __func__, addr, size);
 
 	/* request for the processor */
-	ret = pops->proc_request(rproc->sci, rproc->proc_id);
-	if (ret) {
-		dev_err(dev, "Requesting processor failed %d\n", ret);
+	ret = ti_sci_proc_request(&rproc->tsp);
+	if (ret)
 		return ret;
-	}
-
-	ret = pops->set_proc_boot_cfg(rproc->sci, rproc->proc_id, addr, 0, 0);
-	if (ret) {
-		dev_err(dev, "set_proc_boot_cfg failed %d\n", ret);
-		return ret;
-	}
-
-	dev_dbg(dev, "%s: rproc successfully loaded\n", __func__);
 
-	return 0;
+	return ti_sci_proc_set_config(&rproc->tsp, addr, 0, 0);
 }
 
 /**
- * k3_rproc_start() - Start the remote processor
+ * k3_arm64_start() - Start the remote processor
  * @dev:	rproc device pointer
  *
  * Return: 0 if all went ok, else return appropriate error
  */
-static int k3_rproc_start(struct udevice *dev)
+static int k3_arm64_start(struct udevice *dev)
 {
-	struct k3_rproc_privdata *rproc = dev_get_priv(dev);
-	const struct ti_sci_proc_ops *pops = &rproc->sci->ops.proc_ops;
+	struct k3_arm64_privdata *rproc = dev_get_priv(dev);
 	int ret;
 
 	dev_dbg(dev, "%s\n", __func__);
@@ -109,33 +95,16 @@ static int k3_rproc_start(struct udevice *dev)
 		return ret;
 	}
 
-	if (rproc->host_id != INVALID_ID) {
-		ret = pops->proc_handover(rproc->sci, rproc->proc_id,
-					  rproc->host_id);
-		if (ret) {
-			dev_err(dev, "Handover processor failed %d\n", ret);
-			return ret;
-		}
-	} else {
-		ret = pops->proc_release(rproc->sci, rproc->proc_id);
-		if (ret) {
-			dev_err(dev, "Processor release failed %d\n", ret);
-			return ret;
-		}
-	}
-
-	dev_dbg(dev, "%s: rproc successfully started\n", __func__);
-
-	return 0;
+	return ti_sci_proc_release(&rproc->tsp);
 }
 
 /**
- * k3_rproc_init() - Initialize the remote processor
+ * k3_arm64_init() - Initialize the remote processor
  * @dev:	rproc device pointer
  *
  * Return: 0 if all went ok, else return appropriate error
  */
-static int k3_rproc_init(struct udevice *dev)
+static int k3_arm64_init(struct udevice *dev)
 {
 	dev_dbg(dev, "%s\n", __func__);
 
@@ -145,12 +114,33 @@ static int k3_rproc_init(struct udevice *dev)
 	return 0;
 }
 
-static const struct dm_rproc_ops k3_rproc_ops = {
-	.init = k3_rproc_init,
-	.load = k3_rproc_load,
-	.start = k3_rproc_start,
+static const struct dm_rproc_ops k3_arm64_ops = {
+	.init = k3_arm64_init,
+	.load = k3_arm64_load,
+	.start = k3_arm64_start,
 };
 
+static int ti_sci_proc_of_to_priv(struct udevice *dev, struct ti_sci_proc *tsp)
+{
+	dev_dbg(dev, "%s\n", __func__);
+
+	tsp->sci = ti_sci_get_by_phandle(dev, "ti,sci");
+	if (IS_ERR(tsp->sci)) {
+		dev_err(dev, "ti_sci get failed: %ld\n", PTR_ERR(tsp->sci));
+		return PTR_ERR(tsp->sci);
+	}
+
+	tsp->proc_id = dev_read_u32_default(dev, "ti,sci-proc-id", INVALID_ID);
+	if (tsp->proc_id == INVALID_ID) {
+		dev_err(dev, "proc id not populated\n");
+		return -ENOENT;
+	}
+	tsp->host_id = dev_read_u32_default(dev, "ti,sci-host-id", INVALID_ID);
+	tsp->ops = &tsp->sci->ops.proc_ops;
+
+	return 0;
+}
+
 /**
  * k3_of_to_priv() - generate private data from device tree
  * @dev:	corresponding k3 remote processor device
@@ -158,8 +148,8 @@ static const struct dm_rproc_ops k3_rproc_ops = {
  *
  * Return: 0 if all goes good, else appropriate error message.
  */
-static int k3_rproc_of_to_priv(struct udevice *dev,
-			       struct k3_rproc_privdata *rproc)
+static int k3_arm64_of_to_priv(struct udevice *dev,
+			       struct k3_arm64_privdata *rproc)
 {
 	int ret;
 
@@ -183,11 +173,9 @@ static int k3_rproc_of_to_priv(struct udevice *dev,
 		return ret;
 	}
 
-	rproc->sci = ti_sci_get_by_phandle(dev, "ti,sci");
-	if (IS_ERR(rproc->sci)) {
-		dev_err(dev, "ti_sci get failed: %d\n", ret);
-		return PTR_ERR(rproc->sci);
-	}
+	ret = ti_sci_proc_of_to_priv(dev, &rproc->tsp);
+	if (ret)
+		return ret;
 
 	rproc->gtc_base = dev_read_addr_ptr(dev);
 	if (!rproc->gtc_base) {
@@ -195,30 +183,25 @@ static int k3_rproc_of_to_priv(struct udevice *dev,
 		return -ENODEV;
 	}
 
-	rproc->proc_id = dev_read_u32_default(dev, "ti,sci-proc-id",
-					      INVALID_ID);
-	rproc->host_id = dev_read_u32_default(dev, "ti,sci-host-id",
-					      INVALID_ID);
-
 	return 0;
 }
 
 /**
- * k3_rproc_probe() - Basic probe
+ * k3_arm64_probe() - Basic probe
  * @dev:	corresponding k3 remote processor device
  *
  * Return: 0 if all goes good, else appropriate error message.
  */
-static int k3_rproc_probe(struct udevice *dev)
+static int k3_arm64_probe(struct udevice *dev)
 {
-	struct k3_rproc_privdata *priv;
+	struct k3_arm64_privdata *priv;
 	int ret;
 
 	dev_dbg(dev, "%s\n", __func__);
 
 	priv = dev_get_priv(dev);
 
-	ret = k3_rproc_of_to_priv(dev, priv);
+	ret = k3_arm64_of_to_priv(dev, priv);
 	if (ret) {
 		dev_dbg(dev, "%s: Probe failed with error %d\n", __func__, ret);
 		return ret;
@@ -229,16 +212,17 @@ static int k3_rproc_probe(struct udevice *dev)
 	return 0;
 }
 
-static const struct udevice_id k3_rproc_ids[] = {
+static const struct udevice_id k3_arm64_ids[] = {
+	{ .compatible = "ti,am654-arm64"},
 	{ .compatible = "ti,am654-rproc"},
 	{}
 };
 
-U_BOOT_DRIVER(k3_rproc) = {
-	.name = "k3_rproc",
-	.of_match = k3_rproc_ids,
+U_BOOT_DRIVER(k3_arm64) = {
+	.name = "k3_arm64",
+	.of_match = k3_arm64_ids,
 	.id = UCLASS_REMOTEPROC,
-	.ops = &k3_rproc_ops,
-	.probe = k3_rproc_probe,
-	.priv_auto_alloc_size = sizeof(struct k3_rproc_privdata),
+	.ops = &k3_arm64_ops,
+	.probe = k3_arm64_probe,
+	.priv_auto_alloc_size = sizeof(struct k3_arm64_privdata),
 };
diff --git a/drivers/remoteproc/ti_sci_proc.h b/drivers/remoteproc/ti_sci_proc.h
new file mode 100644
index 00000000000..ccfc39ec887
--- /dev/null
+++ b/drivers/remoteproc/ti_sci_proc.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Texas Instruments TI-SCI Processor Controller Helper Functions
+ *
+ * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ *	Suman Anna <s-anna@ti.com>
+ */
+
+#ifndef REMOTEPROC_TI_SCI_PROC_H
+#define REMOTEPROC_TI_SCI_PROC_H
+
+#define TISCI_INVALID_HOST 0xff
+
+/**
+ * struct ti_sci_proc - structure representing a processor control client
+ * @sci: cached TI-SCI protocol handle
+ * @ops: cached TI-SCI proc ops
+ * @proc_id: processor id for the consumer remoteproc device
+ * @host_id: host id to pass the control over for this consumer remoteproc
+ *	     device
+ */
+struct ti_sci_proc {
+	const struct ti_sci_handle *sci;
+	const struct ti_sci_proc_ops *ops;
+	u8 proc_id;
+	u8 host_id;
+};
+
+static inline int ti_sci_proc_request(struct ti_sci_proc *tsp)
+{
+	int ret;
+
+	debug("%s: proc_id = %d\n", __func__, tsp->proc_id);
+
+	ret = tsp->ops->proc_request(tsp->sci, tsp->proc_id);
+	if (ret)
+		pr_err("ti-sci processor request failed: %d\n", ret);
+	return ret;
+}
+
+static inline int ti_sci_proc_release(struct ti_sci_proc *tsp)
+{
+	int ret;
+
+	debug("%s: proc_id = %d\n", __func__, tsp->proc_id);
+
+	if (tsp->host_id != TISCI_INVALID_HOST)
+		ret = tsp->ops->proc_handover(tsp->sci, tsp->proc_id,
+					      tsp->host_id);
+	else
+		ret = tsp->ops->proc_release(tsp->sci, tsp->proc_id);
+
+	if (ret)
+		pr_err("ti-sci processor release failed: %d\n", ret);
+	return ret;
+}
+
+static inline int ti_sci_proc_handover(struct ti_sci_proc *tsp)
+{
+	int ret;
+
+	debug("%s: proc_id = %d\n", __func__, tsp->proc_id);
+
+	ret = tsp->ops->proc_handover(tsp->sci, tsp->proc_id, tsp->host_id);
+	if (ret)
+		pr_err("ti-sci processor handover of %d to %d failed: %d\n",
+		       tsp->proc_id, tsp->host_id, ret);
+	return ret;
+}
+
+static inline int ti_sci_proc_get_status(struct ti_sci_proc *tsp,
+					 u64 *boot_vector, u32 *cfg_flags,
+					 u32 *ctrl_flags, u32 *status_flags)
+{
+	int ret;
+
+	ret = tsp->ops->get_proc_boot_status(tsp->sci, tsp->proc_id,
+					     boot_vector, cfg_flags, ctrl_flags,
+					     status_flags);
+	if (ret)
+		pr_err("ti-sci processor get_status failed: %d\n", ret);
+
+	debug("%s: proc_id = %d, boot_vector = 0x%llx, cfg_flags = 0x%x, ctrl_flags = 0x%x, sts = 0x%x\n",
+	      __func__, tsp->proc_id, *boot_vector, *cfg_flags, *ctrl_flags,
+	      *status_flags);
+	return ret;
+}
+
+static inline int ti_sci_proc_set_config(struct ti_sci_proc *tsp,
+					 u64 boot_vector,
+					 u32 cfg_set, u32 cfg_clr)
+{
+	int ret;
+
+	debug("%s: proc_id = %d, boot_vector = 0x%llx, cfg_set = 0x%x, cfg_clr = 0x%x\n",
+	      __func__, tsp->proc_id, boot_vector, cfg_set, cfg_clr);
+
+	ret = tsp->ops->set_proc_boot_cfg(tsp->sci, tsp->proc_id, boot_vector,
+					  cfg_set, cfg_clr);
+	if (ret)
+		pr_err("ti-sci processor set_config failed: %d\n", ret);
+	return ret;
+}
+
+static inline int ti_sci_proc_set_control(struct ti_sci_proc *tsp,
+					  u32 ctrl_set, u32 ctrl_clr)
+{
+	int ret;
+
+	debug("%s: proc_id = %d, ctrl_set = 0x%x, ctrl_clr = 0x%x\n", __func__,
+	      tsp->proc_id, ctrl_set, ctrl_clr);
+
+	ret = tsp->ops->set_proc_boot_ctrl(tsp->sci, tsp->proc_id, ctrl_set,
+					   ctrl_clr);
+	if (ret)
+		pr_err("ti-sci processor set_control failed: %d\n", ret);
+	return ret;
+}
+
+#endif /* REMOTEPROC_TI_SCI_PROC_H */