diff options
| author | Icenowy Zheng | 2018-11-23 00:37:48 +0100 |
|---|---|---|
| committer | Jagan Teki | 2018-11-23 11:01:09 +0530 |
| commit | 9b16ede4a4e898564f54e1c09ae658a5975b432b (patch) | |
| tree | 2bb4de82415f971012c109c82ba5e27b3d108f15 /drivers | |
| parent | aa09a071c3295011816c0e2f18532f61bc8b74f3 (diff) | |
sun8i_emac: add support for setting EMAC TX/RX delay
Some boards have the EMAC TX/RX lanes wired with a different length with
the clock lane, which can be workarounded by setting a TX/RX delay in
the EMAC.
This kind of delays are already defined in the newest device tree
binding of dwmac-sun8i, which has already entered linux-next.
Add support for setting these delays.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/sun8i_emac.c | 34 |
1 files changed, 31 insertions, 3 deletions
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index 3ba3a1ff8be..c9798445c7d 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -60,6 +60,10 @@ #define SC_ETCS_MASK GENMASK(1, 0) #define SC_ETCS_EXT_GMII 0x1 #define SC_ETCS_INT_GMII 0x2 +#define SC_ETXDC_MASK GENMASK(12, 10) +#define SC_ETXDC_OFFSET 10 +#define SC_ERXDC_MASK GENMASK(9, 5) +#define SC_ERXDC_OFFSET 5 #define CONFIG_MDIO_TIMEOUT (3 * CONFIG_SYS_HZ) @@ -140,6 +144,8 @@ struct emac_eth_dev { struct sun8i_eth_pdata { struct eth_pdata eth_pdata; u32 reset_delays[3]; + int tx_delay_ps; + int rx_delay_ps; }; @@ -273,7 +279,8 @@ static int sun8i_emac_set_syscon_ephy(struct emac_eth_dev *priv, u32 *reg) return 0; } -static int sun8i_emac_set_syscon(struct emac_eth_dev *priv) +static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata, + struct emac_eth_dev *priv) { int ret; u32 reg; @@ -312,6 +319,14 @@ static int sun8i_emac_set_syscon(struct emac_eth_dev *priv) return -EINVAL; } + if (pdata->tx_delay_ps) + reg |= ((pdata->tx_delay_ps / 100) << SC_ETXDC_OFFSET) + & SC_ETXDC_MASK; + + if (pdata->rx_delay_ps) + reg |= ((pdata->rx_delay_ps / 100) << SC_ERXDC_OFFSET) + & SC_ERXDC_MASK; + writel(reg, priv->sysctl_reg + 0x30); return 0; @@ -784,13 +799,14 @@ static void sun8i_emac_eth_stop(struct udevice *dev) static int sun8i_emac_eth_probe(struct udevice *dev) { - struct eth_pdata *pdata = dev_get_platdata(dev); + struct sun8i_eth_pdata *sun8i_pdata = dev_get_platdata(dev); + struct eth_pdata *pdata = &sun8i_pdata->eth_pdata; struct emac_eth_dev *priv = dev_get_priv(dev); priv->mac_reg = (void *)pdata->iobase; sun8i_emac_board_setup(priv); - sun8i_emac_set_syscon(priv); + sun8i_emac_set_syscon(sun8i_pdata, priv); sun8i_mdio_init(dev->name, dev); priv->bus = miiphy_get_dev_by_name(dev->name); @@ -891,6 +907,18 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev) if (!priv->use_internal_phy) parse_phy_pins(dev); + sun8i_pdata->tx_delay_ps = fdtdec_get_int(gd->fdt_blob, node, + "allwinner,tx-delay-ps", 0); + if (sun8i_pdata->tx_delay_ps < 0 || sun8i_pdata->tx_delay_ps > 700) + printf("%s: Invalid TX delay value %d\n", __func__, + sun8i_pdata->tx_delay_ps); + + sun8i_pdata->rx_delay_ps = fdtdec_get_int(gd->fdt_blob, node, + "allwinner,rx-delay-ps", 0); + if (sun8i_pdata->rx_delay_ps < 0 || sun8i_pdata->rx_delay_ps > 3100) + printf("%s: Invalid RX delay value %d\n", __func__, + sun8i_pdata->rx_delay_ps); + #ifdef CONFIG_DM_GPIO if (fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev), "snps,reset-active-low")) |