mmc: uniphier: add driver for UniPhier SD/MMC host controller

Add a driver for the on-chip SD/eMMC host controller used by
UniPhier SoC family.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

3 files changed, 758 insertions, 0 deletions

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 9d3f7e908fb..dc8532fe937 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -43,4 +43,10 @@ config ZYNQ_SDHCI
 	help
 	  Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
 
+config MMC_UNIPHIER
+	bool "UniPhier SD/MMC Host Controller support"
+	depends on ARCH_UNIPHIER
+	help
+	  This selects support for the SD/MMC Host Controller on UniPhier SoCs.
+
 endmenu
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index c9c3e3e9381..b85e4bfb770 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SH_SDHI) += sh_sdhi.o
 obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
 obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o
 obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
+obj-$(CONFIG_MMC_UNIPHIER) += uniphier-sd.o
 obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
 
 ifdef CONFIG_SPL_BUILD
diff --git a/drivers/mmc/uniphier-sd.c b/drivers/mmc/uniphier-sd.c
new file mode 100644
index 00000000000..3bc4d942a03
--- /dev/null
+++ b/drivers/mmc/uniphier-sd.c
@@ -0,0 +1,751 @@
+/*
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <fdtdec.h>
+#include <mapmem.h>
+#include <mmc.h>
+#include <dm/device.h>
+#include <linux/compat.h>
+#include <linux/io.h>
+#include <asm/unaligned.h>
+#include <asm/dma-mapping.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UNIPHIER_SD_CMD			0x000	/* command */
+#define   UNIPHIER_SD_CMD_NOSTOP	BIT(14)	/* No automatic CMD12 issue */
+#define   UNIPHIER_SD_CMD_MULTI		BIT(13)	/* multiple block transfer */
+#define   UNIPHIER_SD_CMD_RD		BIT(12)	/* 1: read, 0: write */
+#define   UNIPHIER_SD_CMD_DATA		BIT(11)	/* data transfer */
+#define   UNIPHIER_SD_CMD_APP		BIT(6)	/* ACMD preceded by CMD55 */
+#define   UNIPHIER_SD_CMD_NORMAL	(0 << 8)/* auto-detect of resp-type */
+#define   UNIPHIER_SD_CMD_RSP_NONE	(3 << 8)/* response: none */
+#define   UNIPHIER_SD_CMD_RSP_R1	(4 << 8)/* response: R1, R5, R6, R7 */
+#define   UNIPHIER_SD_CMD_RSP_R1B	(5 << 8)/* response: R1b, R5b */
+#define   UNIPHIER_SD_CMD_RSP_R2	(6 << 8)/* response: R2 */
+#define   UNIPHIER_SD_CMD_RSP_R3	(7 << 8)/* response: R3, R4 */
+#define UNIPHIER_SD_ARG			0x008	/* command argument */
+#define UNIPHIER_SD_STOP		0x010	/* stop action control */
+#define   UNIPHIER_SD_STOP_SEC		BIT(8)	/* use sector count */
+#define   UNIPHIER_SD_STOP_STP		BIT(0)	/* issue CMD12 */
+#define UNIPHIER_SD_SECCNT		0x014	/* sector counter */
+#define UNIPHIER_SD_RSP10		0x018	/* response[39:8] */
+#define UNIPHIER_SD_RSP32		0x020	/* response[71:40] */
+#define UNIPHIER_SD_RSP54		0x028	/* response[103:72] */
+#define UNIPHIER_SD_RSP76		0x030	/* response[127:104] */
+#define UNIPHIER_SD_INFO1		0x038	/* IRQ status 1 */
+#define   UNIPHIER_SD_INFO1_CD		BIT(5)	/* state of card detect */
+#define   UNIPHIER_SD_INFO1_INSERT	BIT(4)	/* card inserted */
+#define   UNIPHIER_SD_INFO1_REMOVE	BIT(3)	/* card removed */
+#define   UNIPHIER_SD_INFO1_CMP		BIT(2)	/* data complete */
+#define   UNIPHIER_SD_INFO1_RSP		BIT(0)	/* response complete */
+#define UNIPHIER_SD_INFO2		0x03c	/* IRQ status 2 */
+#define   UNIPHIER_SD_INFO2_ERR_ILA	BIT(15)	/* illegal access err */
+#define   UNIPHIER_SD_INFO2_CBSY	BIT(14)	/* command busy */
+#define   UNIPHIER_SD_INFO2_BWE		BIT(9)	/* write buffer ready */
+#define   UNIPHIER_SD_INFO2_BRE		BIT(8)	/* read buffer ready */
+#define   UNIPHIER_SD_INFO2_DAT0	BIT(7)	/* SDDAT0 */
+#define   UNIPHIER_SD_INFO2_ERR_RTO	BIT(6)	/* response time out */
+#define   UNIPHIER_SD_INFO2_ERR_ILR	BIT(5)	/* illegal read err */
+#define   UNIPHIER_SD_INFO2_ERR_ILW	BIT(4)	/* illegal write err */
+#define   UNIPHIER_SD_INFO2_ERR_TO	BIT(3)	/* time out error */
+#define   UNIPHIER_SD_INFO2_ERR_END	BIT(2)	/* END bit error */
+#define   UNIPHIER_SD_INFO2_ERR_CRC	BIT(1)	/* CRC error */
+#define   UNIPHIER_SD_INFO2_ERR_IDX	BIT(0)	/* cmd index error */
+#define UNIPHIER_SD_INFO1_MASK		0x040
+#define UNIPHIER_SD_INFO2_MASK		0x044
+#define UNIPHIER_SD_CLKCTL		0x048	/* clock divisor */
+#define   UNIPHIER_SD_CLKCTL_DIV_MASK	0x104ff
+#define   UNIPHIER_SD_CLKCTL_DIV1024	BIT(16)	/* SDCLK = CLK / 1024 */
+#define   UNIPHIER_SD_CLKCTL_DIV512	BIT(7)	/* SDCLK = CLK / 512 */
+#define   UNIPHIER_SD_CLKCTL_DIV256	BIT(6)	/* SDCLK = CLK / 256 */
+#define   UNIPHIER_SD_CLKCTL_DIV128	BIT(5)	/* SDCLK = CLK / 128 */
+#define   UNIPHIER_SD_CLKCTL_DIV64	BIT(4)	/* SDCLK = CLK / 64 */
+#define   UNIPHIER_SD_CLKCTL_DIV32	BIT(3)	/* SDCLK = CLK / 32 */
+#define   UNIPHIER_SD_CLKCTL_DIV16	BIT(2)	/* SDCLK = CLK / 16 */
+#define   UNIPHIER_SD_CLKCTL_DIV8	BIT(1)	/* SDCLK = CLK / 8 */
+#define   UNIPHIER_SD_CLKCTL_DIV4	BIT(0)	/* SDCLK = CLK / 4 */
+#define   UNIPHIER_SD_CLKCTL_DIV2	0	/* SDCLK = CLK / 2 */
+#define   UNIPHIER_SD_CLKCTL_DIV1	BIT(10)	/* SDCLK = CLK */
+#define   UNIPHIER_SD_CLKCTL_OFFEN	BIT(9)	/* stop SDCLK when unused */
+#define   UNIPHIER_SD_CLKCTL_SCLKEN	BIT(8)	/* SDCLK output enable */
+#define UNIPHIER_SD_SIZE		0x04c	/* block size */
+#define UNIPHIER_SD_OPTION		0x050
+#define   UNIPHIER_SD_OPTION_WIDTH_MASK	(5 << 13)
+#define   UNIPHIER_SD_OPTION_WIDTH_1	(4 << 13)
+#define   UNIPHIER_SD_OPTION_WIDTH_4	(0 << 13)
+#define   UNIPHIER_SD_OPTION_WIDTH_8	(1 << 13)
+#define UNIPHIER_SD_BUF			0x060	/* read/write buffer */
+#define UNIPHIER_SD_EXTMODE		0x1b0
+#define   UNIPHIER_SD_EXTMODE_DMA_EN	BIT(1)	/* transfer 1: DMA, 0: pio */
+#define UNIPHIER_SD_SOFT_RST		0x1c0
+#define UNIPHIER_SD_SOFT_RST_RSTX	BIT(0)	/* reset deassert */
+#define UNIPHIER_SD_VERSION		0x1c4	/* version register */
+#define UNIPHIER_SD_VERSION_IP		0xff	/* IP version */
+#define UNIPHIER_SD_HOST_MODE		0x1c8
+#define UNIPHIER_SD_IF_MODE		0x1cc
+#define   UNIPHIER_SD_IF_MODE_DDR	BIT(0)	/* DDR mode */
+#define UNIPHIER_SD_VOLT		0x1e4	/* voltage switch */
+#define   UNIPHIER_SD_VOLT_MASK		(3 << 0)
+#define   UNIPHIER_SD_VOLT_OFF		(0 << 0)
+#define   UNIPHIER_SD_VOLT_330		(1 << 0)/* 3.3V signal */
+#define   UNIPHIER_SD_VOLT_180		(2 << 0)/* 1.8V signal */
+#define UNIPHIER_SD_DMA_MODE		0x410
+#define   UNIPHIER_SD_DMA_MODE_DIR_RD	BIT(16)	/* 1: from device, 0: to dev */
+#define   UNIPHIER_SD_DMA_MODE_ADDR_INC	BIT(0)	/* 1: address inc, 0: fixed */
+#define UNIPHIER_SD_DMA_CTL		0x414
+#define   UNIPHIER_SD_DMA_CTL_START	BIT(0)	/* start DMA (auto cleared) */
+#define UNIPHIER_SD_DMA_RST		0x418
+#define   UNIPHIER_SD_DMA_RST_RD	BIT(9)
+#define   UNIPHIER_SD_DMA_RST_WR	BIT(8)
+#define UNIPHIER_SD_DMA_INFO1		0x420
+#define   UNIPHIER_SD_DMA_INFO1_END_RD2	BIT(20)	/* DMA from device is complete*/
+#define   UNIPHIER_SD_DMA_INFO1_END_RD	BIT(17)	/* Don't use!  Hardware bug */
+#define   UNIPHIER_SD_DMA_INFO1_END_WR	BIT(16)	/* DMA to device is complete */
+#define UNIPHIER_SD_DMA_INFO1_MASK	0x424
+#define UNIPHIER_SD_DMA_INFO2		0x428
+#define   UNIPHIER_SD_DMA_INFO2_ERR_RD	BIT(17)
+#define   UNIPHIER_SD_DMA_INFO2_ERR_WR	BIT(16)
+#define UNIPHIER_SD_DMA_INFO2_MASK	0x42c
+#define UNIPHIER_SD_DMA_ADDR_L		0x440
+#define UNIPHIER_SD_DMA_ADDR_H		0x444
+
+/* alignment required by the DMA engine of this controller */
+#define UNIPHIER_SD_DMA_MINALIGN	0x10
+
+struct uniphier_sd_priv {
+	struct mmc_config cfg;
+	struct mmc *mmc;
+	struct udevice *dev;
+	void __iomem *regbase;
+	unsigned long mclk;
+	unsigned int version;
+	u32 caps;
+#define UNIPHIER_SD_CAP_NONREMOVABLE	BIT(0)	/* Nonremovable e.g. eMMC */
+#define UNIPHIER_SD_CAP_DMA_INTERNAL	BIT(1)	/* have internal DMA engine */
+#define UNIPHIER_SD_CAP_DIV1024		BIT(2)	/* divisor 1024 is available */
+};
+
+static dma_addr_t __dma_map_single(void *ptr, size_t size,
+				   enum dma_data_direction dir)
+{
+	unsigned long addr = (unsigned long)ptr;
+
+	if (dir == DMA_FROM_DEVICE)
+		invalidate_dcache_range(addr, addr + size);
+	else
+		flush_dcache_range(addr, addr + size);
+
+	return addr;
+}
+
+static void __dma_unmap_single(dma_addr_t addr, size_t size,
+			       enum dma_data_direction dir)
+{
+	if (dir != DMA_TO_DEVICE)
+		invalidate_dcache_range(addr, addr + size);
+}
+
+static int uniphier_sd_check_error(struct uniphier_sd_priv *priv)
+{
+	u32 info2 = readl(priv->regbase + UNIPHIER_SD_INFO2);
+
+	if (info2 & UNIPHIER_SD_INFO2_ERR_RTO) {
+		/*
+		 * TIMEOUT must be returned for unsupported command.  Do not
+		 * display error log since this might be a part of sequence to
+		 * distinguish between SD and MMC.
+		 */
+		return TIMEOUT;
+	}
+
+	if (info2 & UNIPHIER_SD_INFO2_ERR_TO) {
+		dev_err(priv->dev, "timeout error\n");
+		return -ETIMEDOUT;
+	}
+
+	if (info2 & (UNIPHIER_SD_INFO2_ERR_END | UNIPHIER_SD_INFO2_ERR_CRC |
+		     UNIPHIER_SD_INFO2_ERR_IDX)) {
+		dev_err(priv->dev, "communication out of sync\n");
+		return -EILSEQ;
+	}
+
+	if (info2 & (UNIPHIER_SD_INFO2_ERR_ILA | UNIPHIER_SD_INFO2_ERR_ILR |
+		     UNIPHIER_SD_INFO2_ERR_ILW)) {
+		dev_err(priv->dev, "illegal access\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int uniphier_sd_wait_for_irq(struct uniphier_sd_priv *priv,
+				    unsigned int reg, u32 flag)
+{
+	long wait = 1000000;
+	int ret;
+
+	while (!(readl(priv->regbase + reg) & flag)) {
+		if (wait-- < 0) {
+			dev_err(priv->dev, "timeout\n");
+			return -ETIMEDOUT;
+		}
+
+		ret = uniphier_sd_check_error(priv);
+		if (ret)
+			return ret;
+
+		udelay(1);
+	}
+
+	return 0;
+}
+
+static int uniphier_sd_pio_read_one_block(struct mmc *mmc, u32 **pbuf,
+					  uint blocksize)
+{
+	struct uniphier_sd_priv *priv = mmc->priv;
+	int i, ret;
+
+	/* wait until the buffer is filled with data */
+	ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO2,
+				       UNIPHIER_SD_INFO2_BRE);
+	if (ret)
+		return ret;
+
+	/*
+	 * Clear the status flag _before_ read the buffer out because
+	 * UNIPHIER_SD_INFO2_BRE is edge-triggered, not level-triggered.
+	 */
+	writel(0, priv->regbase + UNIPHIER_SD_INFO2);
+
+	if (likely(IS_ALIGNED((unsigned long)*pbuf, 4))) {
+		for (i = 0; i < blocksize / 4; i++)
+			*(*pbuf)++ = readl(priv->regbase + UNIPHIER_SD_BUF);
+	} else {
+		for (i = 0; i < blocksize / 4; i++)
+			put_unaligned(readl(priv->regbase + UNIPHIER_SD_BUF),
+				      (*pbuf)++);
+	}
+
+	return 0;
+}
+
+static int uniphier_sd_pio_write_one_block(struct mmc *mmc, const u32 **pbuf,
+					   uint blocksize)
+{
+	struct uniphier_sd_priv *priv = mmc->priv;
+	int i, ret;
+
+	/* wait until the buffer becomes empty */
+	ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO2,
+				       UNIPHIER_SD_INFO2_BWE);
+	if (ret)
+		return ret;
+
+	writel(0, priv->regbase + UNIPHIER_SD_INFO2);
+
+	if (likely(IS_ALIGNED((unsigned long)*pbuf, 4))) {
+		for (i = 0; i < blocksize / 4; i++)
+			writel(*(*pbuf)++, priv->regbase + UNIPHIER_SD_BUF);
+	} else {
+		for (i = 0; i < blocksize / 4; i++)
+			writel(get_unaligned((*pbuf)++),
+			       priv->regbase + UNIPHIER_SD_BUF);
+	}
+
+	return 0;
+}
+
+static int uniphier_sd_pio_xfer(struct mmc *mmc, struct mmc_data *data)
+{
+	u32 *dest = (u32 *)data->dest;
+	const u32 *src = (const u32 *)data->src;
+	int i, ret;
+
+	for (i = 0; i < data->blocks; i++) {
+		if (data->flags & MMC_DATA_READ)
+			ret = uniphier_sd_pio_read_one_block(mmc, &dest,
+							     data->blocksize);
+		else
+			ret = uniphier_sd_pio_write_one_block(mmc, &src,
+							      data->blocksize);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void uniphier_sd_dma_start(struct uniphier_sd_priv *priv,
+				  dma_addr_t dma_addr)
+{
+	u32 tmp;
+
+	writel(0, priv->regbase + UNIPHIER_SD_DMA_INFO1);
+	writel(0, priv->regbase + UNIPHIER_SD_DMA_INFO2);
+
+	/* enable DMA */
+	tmp = readl(priv->regbase + UNIPHIER_SD_EXTMODE);
+	tmp |= UNIPHIER_SD_EXTMODE_DMA_EN;
+	writel(tmp, priv->regbase + UNIPHIER_SD_EXTMODE);
+
+	writel(dma_addr & U32_MAX, priv->regbase + UNIPHIER_SD_DMA_ADDR_L);
+
+	/* suppress the warning "right shift count >= width of type" */
+	dma_addr >>= min_t(int, 32, 8 * sizeof(dma_addr));
+
+	writel(dma_addr & U32_MAX, priv->regbase + UNIPHIER_SD_DMA_ADDR_H);
+
+	writel(UNIPHIER_SD_DMA_CTL_START, priv->regbase + UNIPHIER_SD_DMA_CTL);
+}
+
+static int uniphier_sd_dma_wait_for_irq(struct uniphier_sd_priv *priv, u32 flag,
+					unsigned int blocks)
+{
+	long wait = 1000000 + 10 * blocks;
+
+	while (!(readl(priv->regbase + UNIPHIER_SD_DMA_INFO1) & flag)) {
+		if (wait-- < 0) {
+			dev_err(priv->dev, "timeout during DMA\n");
+			return -ETIMEDOUT;
+		}
+
+		udelay(10);
+	}
+
+	if (readl(priv->regbase + UNIPHIER_SD_DMA_INFO2)) {
+		dev_err(priv->dev, "error during DMA\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int uniphier_sd_dma_xfer(struct mmc *mmc, struct mmc_data *data)
+{
+	struct uniphier_sd_priv *priv = mmc->priv;
+	size_t len = data->blocks * data->blocksize;
+	void *buf;
+	enum dma_data_direction dir;
+	dma_addr_t dma_addr;
+	u32 poll_flag, tmp;
+	int ret;
+
+	tmp = readl(priv->regbase + UNIPHIER_SD_DMA_MODE);
+
+	if (data->flags & MMC_DATA_READ) {
+		buf = data->dest;
+		dir = DMA_FROM_DEVICE;
+		poll_flag = UNIPHIER_SD_DMA_INFO1_END_RD2;
+		tmp |= UNIPHIER_SD_DMA_MODE_DIR_RD;
+	} else {
+		buf = (void *)data->src;
+		dir = DMA_TO_DEVICE;
+		poll_flag = UNIPHIER_SD_DMA_INFO1_END_WR;
+		tmp &= ~UNIPHIER_SD_DMA_MODE_DIR_RD;
+	}
+
+	writel(tmp, priv->regbase + UNIPHIER_SD_DMA_MODE);
+
+	dma_addr = __dma_map_single(buf, len, dir);
+
+	uniphier_sd_dma_start(priv, dma_addr);
+
+	ret = uniphier_sd_dma_wait_for_irq(priv, poll_flag, data->blocks);
+
+	__dma_unmap_single(dma_addr, len, dir);
+
+	return ret;
+}
+
+/* check if the address is DMA'able */
+static bool uniphier_sd_addr_is_dmaable(unsigned long addr)
+{
+	if (!IS_ALIGNED(addr, UNIPHIER_SD_DMA_MINALIGN))
+		return false;
+
+#if defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARM64) && \
+	defined(CONFIG_SPL_BUILD)
+	/*
+	 * For UniPhier ARMv7 SoCs, the stack is allocated in the locked ways
+	 * of L2, which is unreachable from the DMA engine.
+	 */
+	if (addr < CONFIG_SPL_STACK)
+		return false;
+#endif
+
+	return true;
+}
+
+static int uniphier_sd_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+				struct mmc_data *data)
+{
+	struct uniphier_sd_priv *priv = mmc->priv;
+	int ret;
+	u32 tmp;
+
+	if (readl(priv->regbase + UNIPHIER_SD_INFO2) & UNIPHIER_SD_INFO2_CBSY) {
+		dev_err(priv->dev, "command busy\n");
+		return -EBUSY;
+	}
+
+	/* clear all status flags */
+	writel(0, priv->regbase + UNIPHIER_SD_INFO1);
+	writel(0, priv->regbase + UNIPHIER_SD_INFO2);
+
+	/* disable DMA once */
+	tmp = readl(priv->regbase + UNIPHIER_SD_EXTMODE);
+	tmp &= ~UNIPHIER_SD_EXTMODE_DMA_EN;
+	writel(tmp, priv->regbase + UNIPHIER_SD_EXTMODE);
+
+	writel(cmd->cmdarg, priv->regbase + UNIPHIER_SD_ARG);
+
+	tmp = cmd->cmdidx;
+
+	if (data) {
+		writel(data->blocksize, priv->regbase + UNIPHIER_SD_SIZE);
+		writel(data->blocks, priv->regbase + UNIPHIER_SD_SECCNT);
+
+		/* Do not send CMD12 automatically */
+		tmp |= UNIPHIER_SD_CMD_NOSTOP | UNIPHIER_SD_CMD_DATA;
+
+		if (data->blocks > 1)
+			tmp |= UNIPHIER_SD_CMD_MULTI;
+
+		if (data->flags & MMC_DATA_READ)
+			tmp |= UNIPHIER_SD_CMD_RD;
+	}
+
+	/*
+	 * Do not use the response type auto-detection on this hardware.
+	 * CMD8, for example, has different response types on SD and eMMC,
+	 * while this controller always assumes the response type for SD.
+	 * Set the response type manually.
+	 */
+	switch (cmd->resp_type) {
+	case MMC_RSP_NONE:
+		tmp |= UNIPHIER_SD_CMD_RSP_NONE;
+		break;
+	case MMC_RSP_R1:
+		tmp |= UNIPHIER_SD_CMD_RSP_R1;
+		break;
+	case MMC_RSP_R1b:
+		tmp |= UNIPHIER_SD_CMD_RSP_R1B;
+		break;
+	case MMC_RSP_R2:
+		tmp |= UNIPHIER_SD_CMD_RSP_R2;
+		break;
+	case MMC_RSP_R3:
+		tmp |= UNIPHIER_SD_CMD_RSP_R3;
+		break;
+	default:
+		dev_err(priv->dev, "unknown response type\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(priv->dev, "sending CMD%d (SD_CMD=%08x, SD_ARG=%08x)\n",
+		cmd->cmdidx, tmp, cmd->cmdarg);
+	writel(tmp, priv->regbase + UNIPHIER_SD_CMD);
+
+	ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO1,
+				       UNIPHIER_SD_INFO1_RSP);
+	if (ret)
+		return ret;
+
+	if (cmd->resp_type & MMC_RSP_136) {
+		u32 rsp_127_104 = readl(priv->regbase + UNIPHIER_SD_RSP76);
+		u32 rsp_103_72 = readl(priv->regbase + UNIPHIER_SD_RSP54);
+		u32 rsp_71_40 = readl(priv->regbase + UNIPHIER_SD_RSP32);
+		u32 rsp_39_8 = readl(priv->regbase + UNIPHIER_SD_RSP10);
+
+		cmd->response[0] = (rsp_127_104 & 0xffffff) << 8 |
+							(rsp_103_72 & 0xff);
+		cmd->response[1] = (rsp_103_72  & 0xffffff) << 8 |
+							(rsp_71_40 & 0xff);
+		cmd->response[2] = (rsp_71_40   & 0xffffff) << 8 |
+							(rsp_39_8 & 0xff);
+		cmd->response[3] = (rsp_39_8    & 0xffffff) << 8;
+	} else {
+		/* bit 39-8 */
+		cmd->response[0] = readl(priv->regbase + UNIPHIER_SD_RSP10);
+	}
+
+	if (data) {
+		/* use DMA if the HW supports it and the buffer is aligned */
+		if (priv->caps & UNIPHIER_SD_CAP_DMA_INTERNAL &&
+		    uniphier_sd_addr_is_dmaable((long)data->src))
+			ret = uniphier_sd_dma_xfer(mmc, data);
+		else
+			ret = uniphier_sd_pio_xfer(mmc, data);
+
+		ret = uniphier_sd_wait_for_irq(priv, UNIPHIER_SD_INFO1,
+					       UNIPHIER_SD_INFO1_CMP);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+static void uniphier_sd_set_bus_width(struct uniphier_sd_priv *priv,
+				      struct mmc *mmc)
+{
+	u32 val, tmp;
+
+	switch (mmc->bus_width) {
+	case 1:
+		val = UNIPHIER_SD_OPTION_WIDTH_1;
+		break;
+	case 4:
+		val = UNIPHIER_SD_OPTION_WIDTH_4;
+		break;
+	case 8:
+		val = UNIPHIER_SD_OPTION_WIDTH_8;
+		break;
+	default:
+		BUG();
+		break;
+	}
+
+	tmp = readl(priv->regbase + UNIPHIER_SD_OPTION);
+	tmp &= ~UNIPHIER_SD_OPTION_WIDTH_MASK;
+	tmp |= val;
+	writel(tmp, priv->regbase + UNIPHIER_SD_OPTION);
+}
+
+static void uniphier_sd_set_ddr_mode(struct uniphier_sd_priv *priv,
+				     struct mmc *mmc)
+{
+	u32 tmp;
+
+	tmp = readl(priv->regbase + UNIPHIER_SD_IF_MODE);
+	if (mmc->ddr_mode)
+		tmp |= UNIPHIER_SD_IF_MODE_DDR;
+	else
+		tmp &= ~UNIPHIER_SD_IF_MODE_DDR;
+	writel(tmp, priv->regbase + UNIPHIER_SD_IF_MODE);
+}
+
+static void uniphier_sd_set_clk_rate(struct uniphier_sd_priv *priv,
+				     struct mmc *mmc)
+{
+	unsigned int divisor;
+	u32 val, tmp;
+
+	if (!mmc->clock)
+		return;
+
+	divisor = DIV_ROUND_UP(priv->mclk, mmc->clock);
+
+	if (divisor <= 1)
+		val = UNIPHIER_SD_CLKCTL_DIV1;
+	else if (divisor <= 2)
+		val = UNIPHIER_SD_CLKCTL_DIV2;
+	else if (divisor <= 4)
+		val = UNIPHIER_SD_CLKCTL_DIV4;
+	else if (divisor <= 8)
+		val = UNIPHIER_SD_CLKCTL_DIV8;
+	else if (divisor <= 16)
+		val = UNIPHIER_SD_CLKCTL_DIV16;
+	else if (divisor <= 32)
+		val = UNIPHIER_SD_CLKCTL_DIV32;
+	else if (divisor <= 64)
+		val = UNIPHIER_SD_CLKCTL_DIV64;
+	else if (divisor <= 128)
+		val = UNIPHIER_SD_CLKCTL_DIV128;
+	else if (divisor <= 256)
+		val = UNIPHIER_SD_CLKCTL_DIV256;
+	else if (divisor <= 512 || !(priv->caps & UNIPHIER_SD_CAP_DIV1024))
+		val = UNIPHIER_SD_CLKCTL_DIV512;
+	else
+		val = UNIPHIER_SD_CLKCTL_DIV1024;
+
+	tmp = readl(priv->regbase + UNIPHIER_SD_CLKCTL);
+
+	/* stop the clock before changing its rate to avoid a glitch signal */
+	tmp &= ~UNIPHIER_SD_CLKCTL_SCLKEN;
+	writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL);
+
+	tmp &= ~UNIPHIER_SD_CLKCTL_DIV_MASK;
+	tmp |= val | UNIPHIER_SD_CLKCTL_OFFEN;
+	writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL);
+
+	tmp |= UNIPHIER_SD_CLKCTL_SCLKEN;
+	writel(tmp, priv->regbase + UNIPHIER_SD_CLKCTL);
+}
+
+static void uniphier_sd_set_ios(struct mmc *mmc)
+{
+	struct uniphier_sd_priv *priv = mmc->priv;
+
+	dev_dbg(priv->dev, "clock %uHz, DDRmode %d, width %u\n",
+		mmc->clock, mmc->ddr_mode, mmc->bus_width);
+
+	uniphier_sd_set_bus_width(priv, mmc);
+	uniphier_sd_set_ddr_mode(priv, mmc);
+	uniphier_sd_set_clk_rate(priv, mmc);
+
+	udelay(1000);
+}
+
+static int uniphier_sd_init(struct mmc *mmc)
+{
+	struct uniphier_sd_priv *priv = mmc->priv;
+	u32 tmp;
+
+	/* soft reset of the host */
+	tmp = readl(priv->regbase + UNIPHIER_SD_SOFT_RST);
+	tmp &= ~UNIPHIER_SD_SOFT_RST_RSTX;
+	writel(tmp, priv->regbase + UNIPHIER_SD_SOFT_RST);
+	tmp |= UNIPHIER_SD_SOFT_RST_RSTX;
+	writel(tmp, priv->regbase + UNIPHIER_SD_SOFT_RST);
+
+	/* FIXME: implement eMMC hw_reset */
+
+	writel(UNIPHIER_SD_STOP_SEC, priv->regbase + UNIPHIER_SD_STOP);
+
+	/*
+	 * Connected to 32bit AXI.
+	 * This register dropped backward compatibility at version 0x10.
+	 * Write an appropriate value depending on the IP version.
+	 */
+	writel(priv->version >= 0x10 ? 0x00000101 : 0x00000000,
+	       priv->regbase + UNIPHIER_SD_HOST_MODE);
+
+	if (priv->caps & UNIPHIER_SD_CAP_DMA_INTERNAL) {
+		tmp = readl(priv->regbase + UNIPHIER_SD_DMA_MODE);
+		tmp |= UNIPHIER_SD_DMA_MODE_ADDR_INC;
+		writel(tmp, priv->regbase + UNIPHIER_SD_DMA_MODE);
+	}
+
+	return 0;
+}
+
+static int uniphier_sd_getcd(struct mmc *mmc)
+{
+	struct uniphier_sd_priv *priv = mmc->priv;
+
+	if (priv->caps & UNIPHIER_SD_CAP_NONREMOVABLE)
+		return 1;
+
+	return !!(readl(priv->regbase + UNIPHIER_SD_INFO1) &
+		  UNIPHIER_SD_INFO1_CD);
+}
+
+static const struct mmc_ops uniphier_sd_ops = {
+	.send_cmd = uniphier_sd_send_cmd,
+	.set_ios = uniphier_sd_set_ios,
+	.init = uniphier_sd_init,
+	.getcd = uniphier_sd_getcd,
+};
+
+int uniphier_sd_probe(struct udevice *dev)
+{
+	struct uniphier_sd_priv *priv = dev_get_priv(dev);
+	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+	fdt_addr_t base;
+	fdt_size_t size;
+	struct udevice *clk_dev;
+	int clk_id;
+	int ret;
+
+	priv->dev = dev;
+
+	base = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", &size);
+	priv->regbase = map_sysmem(base, size);
+	if (!priv->regbase)
+		return -ENOMEM;
+
+	clk_id = clk_get_by_index(dev, 0, &clk_dev);
+	if (clk_id < 0) {
+		dev_err(dev, "failed to get host clock\n");
+		return clk_id;
+	}
+
+	/* set to max rate */
+	priv->mclk = clk_set_periph_rate(clk_dev, clk_id, ULONG_MAX);
+	if (IS_ERR_VALUE(priv->mclk)) {
+		dev_err(dev, "failed to set rate for host clock\n");
+		return priv->mclk;
+	}
+
+	ret = clk_enable(clk_dev, clk_id);
+	if (ret) {
+		dev_err(dev, "failed to enable host clock\n");
+		return ret;
+	}
+
+	priv->cfg.name = dev->name;
+	priv->cfg.ops = &uniphier_sd_ops;
+	priv->cfg.host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+	switch (fdtdec_get_int(gd->fdt_blob, dev->of_offset, "bus-width", 1)) {
+	case 8:
+		priv->cfg.host_caps |= MMC_MODE_8BIT;
+		break;
+	case 4:
+		priv->cfg.host_caps |= MMC_MODE_4BIT;
+		break;
+	case 1:
+		break;
+	default:
+		dev_err(dev, "Invalid \"bus-width\" value\n");
+		return -EINVAL;
+	}
+
+	if (fdt_get_property(gd->fdt_blob, dev->of_offset, "non-removable",
+			     NULL))
+		priv->caps |= UNIPHIER_SD_CAP_NONREMOVABLE;
+
+	priv->version = readl(priv->regbase + UNIPHIER_SD_VERSION) &
+							UNIPHIER_SD_VERSION_IP;
+	dev_dbg(dev, "version %x\n", priv->version);
+	if (priv->version >= 0x10) {
+		priv->caps |= UNIPHIER_SD_CAP_DMA_INTERNAL;
+		priv->caps |= UNIPHIER_SD_CAP_DIV1024;
+	}
+
+	priv->cfg.voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34;
+	priv->cfg.f_min = priv->mclk /
+			(priv->caps & UNIPHIER_SD_CAP_DIV1024 ? 1024 : 512);
+	priv->cfg.f_max = priv->mclk;
+	priv->cfg.b_max = U32_MAX; /* max value of UNIPHIER_SD_SECCNT */
+
+	priv->mmc = mmc_create(&priv->cfg, priv);
+	if (!priv->mmc)
+		return -EIO;
+
+	upriv->mmc = priv->mmc;
+
+	return 0;
+}
+
+int uniphier_sd_remove(struct udevice *dev)
+{
+	struct uniphier_sd_priv *priv = dev_get_priv(dev);
+
+	unmap_sysmem(priv->regbase);
+	mmc_destroy(priv->mmc);
+
+	return 0;
+}
+
+static const struct udevice_id uniphier_sd_match[] = {
+	{ .compatible = "socionext,uniphier-sdhc" },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(uniphier_mmc) = {
+	.name = "uniphier-mmc",
+	.id = UCLASS_MMC,
+	.of_match = uniphier_sd_match,
+	.probe = uniphier_sd_probe,
+	.remove = uniphier_sd_remove,
+	.priv_auto_alloc_size = sizeof(struct uniphier_sd_priv),
+};