diff options
| author | Tetsuyuki Kobayashi | 2012-09-13 19:07:56 +0000 |
|---|---|---|
| committer | Heiko Schocher | 2012-10-16 05:47:19 +0200 |
| commit | b1af67fe5e019bbfaca9ca4ec7086fbdb69c440a (patch) | |
| tree | dd155b3ec2286e6c750211edc9a683ff3d49c6d0 /drivers | |
| parent | bd23b22badadcdc414a900828253961fc5ec6c39 (diff) | |
i2c: sh_i2c.c: support iccl and icch extension
R-mobile SoC (at least SH73A0) has extension bits to store 8th bit of iccl and icch.
This patch add support for the extentin bits.
Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/sh_i2c.c | 30 |
1 files changed, 22 insertions, 8 deletions
diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c index 3147123bba8..035069f07ba 100644 --- a/drivers/i2c/sh_i2c.c +++ b/drivers/i2c/sh_i2c.c @@ -48,7 +48,13 @@ static struct sh_i2c *base; #define SH_IC_WAIT (1 << 1) #define SH_IC_DTE (1 << 0) -static u8 iccl, icch; +#ifdef CONFIG_SH_I2C_8BIT +/* store 8th bit of iccl and icch in ICIC register */ +#define SH_I2C_ICIC_ICCLB8 (1 << 7) +#define SH_I2C_ICIC_ICCHB8 (1 << 6) +#endif + +static u16 iccl, icch; #define IRQ_WAIT 1000 @@ -76,12 +82,20 @@ static void irq_busy(struct sh_i2c *base) static void i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop) { + u8 icic = 0; + writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr); writeb(readb(&base->iccr) | SH_I2C_ICCR_ICE, &base->iccr); - writeb(iccl, &base->iccl); - writeb(icch, &base->icch); - writeb(0, &base->icic); + writeb(iccl & 0xff, &base->iccl); + writeb(icch & 0xff, &base->icch); +#ifdef CONFIG_SH_I2C_8BIT + if (iccl > 0xff) + icic |= SH_I2C_ICIC_ICCLB8; + if (icch > 0xff) + icic |= SH_I2C_ICIC_ICCHB8; +#endif + writeb(icic, &base->icic); writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr); irq_dte(base); @@ -206,18 +220,18 @@ void i2c_init(int speed, int slaveaddr) denom = speed * (CONFIG_SH_I2C_DATA_HIGH + CONFIG_SH_I2C_DATA_LOW); tmp = num * 10 / denom; if (tmp % 10 >= 5) - iccl = (u8)((num/denom) + 1); + iccl = (u16)((num/denom) + 1); else - iccl = (u8)(num/denom); + iccl = (u16)(num/denom); /* Calculate the value for icch. From the data sheet: icch = (p clock / transfer rate) * (H / (L + H)) */ num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_HIGH; tmp = num * 10 / denom; if (tmp % 10 >= 5) - icch = (u8)((num/denom) + 1); + icch = (u16)((num/denom) + 1); else - icch = (u8)(num/denom); + icch = (u16)(num/denom); } /* |