Merge branch 'master' of git://git.denx.de/u-boot-arm

11 files changed, 4138 insertions, 32 deletions

diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 52d8e2432e7..9ecdc5ef109 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_FPGA_SPARTAN2) += spartan2.o
 COBJS-$(CONFIG_FPGA_SPARTAN3) += spartan3.o
 COBJS-$(CONFIG_FPGA_VIRTEX2) += virtex2.o
 COBJS-$(CONFIG_FPGA_XILINX) += xilinx.o
+COBJS-$(CONFIG_FPGA_LATTICE) += ivm_core.o lattice.o
 ifdef CONFIG_FPGA_ALTERA
 COBJS-y += altera.o
 COBJS-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o
diff --git a/drivers/fpga/fpga.c b/drivers/fpga/fpga.c
index 5659517793e..e41e72851f2 100644
--- a/drivers/fpga/fpga.c
+++ b/drivers/fpga/fpga.c
@@ -28,6 +28,7 @@
 #include <common.h>             /* core U-Boot definitions */
 #include <xilinx.h>             /* xilinx specific definitions */
 #include <altera.h>             /* altera specific definitions */
+#include <lattice.h>
 
 #if 0
 #define FPGA_DEBUG              /* define FPGA_DEBUG to get debug messages */
@@ -139,6 +140,10 @@ static int fpga_dev_info( int devnum )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			printf("Lattice Device\nDescriptor @ 0x%p\n", desc);
+			ret_val = lattice_info(desc->devdesc);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 					__FUNCTION__, desc->devtype );
@@ -224,6 +229,9 @@ int fpga_load( int devnum, void *buf, size_t bsize )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			ret_val = lattice_load(desc->devdesc, buf, bsize);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 				__FUNCTION__, desc->devtype );
@@ -257,6 +265,9 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
 #endif
 			break;
+		case fpga_lattice:
+			ret_val = lattice_dump(desc->devdesc, buf, bsize);
+			break;
 		default:
 			printf( "%s: Invalid or unsupported device type %d\n",
 				__FUNCTION__, desc->devtype );
diff --git a/drivers/fpga/ivm_core.c b/drivers/fpga/ivm_core.c
new file mode 100755
index 00000000000..2b5a485f233
--- /dev/null
+++ b/drivers/fpga/ivm_core.c
@@ -0,0 +1,3167 @@
+/*
+ * Porting to u-boot:
+ *
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * Lattice ispVME Embedded code to load Lattice's FPGA:
+ *
+ * Copyright 2009 Lattice Semiconductor Corp.
+ *
+ * ispVME Embedded allows programming of Lattice's suite of FPGA
+ * devices on embedded systems through the JTAG port.  The software
+ * is distributed in source code form and is open to re - distribution
+ * and modification where applicable.
+ *
+ * Revision History of ivm_core.c module:
+ * 4/25/06 ht   Change some variables from unsigned short or int
+ *              to long int to make the code compiler independent.
+ * 5/24/06 ht   Support using RESET (TRST) pin as a special purpose
+ *              control pin such as triggering the loading of known
+ *              state exit.
+ * 3/6/07 ht added functions to support output to terminals
+ *
+ * 09/11/07 NN Type cast mismatch variables
+ *		   Moved the sclock() function to hardware.c
+ * 08/28/08 NN Added Calculate checksum support.
+ * 4/1/09 Nguyen replaced the recursive function call codes on
+ *        the ispVMLCOUNT function
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/string.h>
+#include <malloc.h>
+#include <lattice.h>
+
+#define vme_out_char(c)	printf("%c", c)
+#define vme_out_hex(c)	printf("%x", c)
+#define vme_out_string(s) printf("%s", s)
+
+/*
+ *
+ * Global variables used to specify the flow control and data type.
+ *
+ *	g_usFlowControl:	flow control register. Each bit in the
+ *                               register can potentially change the
+ *                               personality of the embedded engine.
+ *	g_usDataType:		holds the data type of the current row.
+ *
+ */
+
+static unsigned short g_usFlowControl;
+unsigned short g_usDataType;
+
+/*
+ *
+ * Global variables used to specify the ENDDR and ENDIR.
+ *
+ *	g_ucEndDR:		the state that the device goes to after SDR.
+ *	g_ucEndIR:		the state that the device goes to after SIR.
+ *
+ */
+
+unsigned char g_ucEndDR = DRPAUSE;
+unsigned char g_ucEndIR = IRPAUSE;
+
+/*
+ *
+ * Global variables used to support header/trailer.
+ *
+ *	g_usHeadDR:		the number of lead devices in bypass.
+ *	g_usHeadIR:		the sum of IR length of lead devices.
+ *	g_usTailDR:		the number of tail devices in bypass.
+ *	g_usTailIR:		the sum of IR length of tail devices.
+ *
+ */
+
+static unsigned short g_usHeadDR;
+static unsigned short g_usHeadIR;
+static unsigned short g_usTailDR;
+static unsigned short g_usTailIR;
+
+/*
+ *
+ * Global variable to store the number of bits of data or instruction
+ * to be shifted into or out from the device.
+ *
+ */
+
+static unsigned short g_usiDataSize;
+
+/*
+ *
+ * Stores the frequency. Default to 1 MHz.
+ *
+ */
+
+static int g_iFrequency = 1000;
+
+/*
+ *
+ * Stores the maximum amount of ram needed to hold a row of data.
+ *
+ */
+
+static unsigned short g_usMaxSize;
+
+/*
+ *
+ * Stores the LSH or RSH value.
+ *
+ */
+
+static unsigned short g_usShiftValue;
+
+/*
+ *
+ * Stores the current repeat loop value.
+ *
+ */
+
+static unsigned short g_usRepeatLoops;
+
+/*
+ *
+ * Stores the current vendor.
+ *
+ */
+
+static signed char g_cVendor = LATTICE;
+
+/*
+ *
+ * Stores the VME file CRC.
+ *
+ */
+
+unsigned short g_usCalculatedCRC;
+
+/*
+ *
+ * Stores the Device Checksum.
+ *
+ */
+/* 08/28/08 NN Added Calculate checksum support. */
+unsigned long g_usChecksum;
+static unsigned int g_uiChecksumIndex;
+
+/*
+ *
+ * Stores the current state of the JTAG state machine.
+ *
+ */
+
+static signed char g_cCurrentJTAGState;
+
+/*
+ *
+ * Global variables used to support looping.
+ *
+ *	g_pucHeapMemory:	holds the entire repeat loop.
+ *	g_iHeapCounter:		points to the current byte in the repeat loop.
+ *	g_iHEAPSize:		the current size of the repeat in bytes.
+ *
+ */
+
+unsigned char *g_pucHeapMemory;
+unsigned short g_iHeapCounter;
+unsigned short g_iHEAPSize;
+static unsigned short previous_size;
+
+/*
+ *
+ * Global variables used to support intelligent programming.
+ *
+ *	g_usIntelDataIndex:     points to the current byte of the
+ *                               intelligent buffer.
+ *	g_usIntelBufferSize:	holds the size of the intelligent
+ *                               buffer.
+ *
+ */
+
+unsigned short g_usIntelDataIndex;
+unsigned short g_usIntelBufferSize;
+
+/*
+ *
+ * Supported VME versions.
+ *
+ */
+
+const char *const g_szSupportedVersions[] = {
+	"__VME2.0", "__VME3.0", "____12.0", "____12.1", 0};
+
+/*
+ *
+ * Holds the maximum size of each respective buffer. These variables are used
+ * to write the HEX files when converting VME to HEX.
+ *
+*/
+
+static unsigned short g_usTDOSize;
+static unsigned short g_usMASKSize;
+static unsigned short g_usTDISize;
+static unsigned short g_usDMASKSize;
+static unsigned short g_usLCOUNTSize;
+static unsigned short g_usHDRSize;
+static unsigned short g_usTDRSize;
+static unsigned short g_usHIRSize;
+static unsigned short g_usTIRSize;
+static unsigned short g_usHeapSize;
+
+/*
+ *
+ * Global variables used to store data.
+ *
+ *	g_pucOutMaskData:	local RAM to hold one row of MASK data.
+ *	g_pucInData:		local RAM to hold one row of TDI data.
+ *	g_pucOutData:		local RAM to hold one row of TDO data.
+ *	g_pucHIRData:		local RAM to hold the current SIR header.
+ *	g_pucTIRData:		local RAM to hold the current SIR trailer.
+ *	g_pucHDRData:		local RAM to hold the current SDR header.
+ *	g_pucTDRData:		local RAM to hold the current SDR trailer.
+ *	g_pucIntelBuffer:	local RAM to hold the current intelligent buffer
+ *	g_pucOutDMaskData:	local RAM to hold one row of DMASK data.
+ *
+ */
+
+unsigned char	*g_pucOutMaskData	= NULL,
+		*g_pucInData		= NULL,
+		*g_pucOutData		= NULL,
+		*g_pucHIRData		= NULL,
+		*g_pucTIRData		= NULL,
+		*g_pucHDRData		= NULL,
+		*g_pucTDRData		= NULL,
+		*g_pucIntelBuffer	= NULL,
+		*g_pucOutDMaskData	= NULL;
+
+/*
+ *
+ * JTAG state machine transition table.
+ *
+ */
+
+struct {
+	 unsigned char  CurState;  /* From this state */
+	 unsigned char  NextState; /* Step to this state */
+	 unsigned char  Pattern;   /* The tragetory of TMS */
+	 unsigned char  Pulses;    /* The number of steps */
+} g_JTAGTransistions[25] = {
+{ RESET,	RESET,		0xFC, 6 },	/* Transitions from RESET */
+{ RESET,	IDLE,		0x00, 1 },
+{ RESET,	DRPAUSE,	0x50, 5 },
+{ RESET,	IRPAUSE,	0x68, 6 },
+{ IDLE,		RESET,		0xE0, 3 },	/* Transitions from IDLE */
+{ IDLE,		DRPAUSE,	0xA0, 4 },
+{ IDLE,		IRPAUSE,	0xD0, 5 },
+{ DRPAUSE,	RESET,		0xF8, 5 },	/* Transitions from DRPAUSE */
+{ DRPAUSE,	IDLE,		0xC0, 3 },
+{ DRPAUSE,	IRPAUSE,	0xF4, 7 },
+{ DRPAUSE,	DRPAUSE,	0xE8, 6 },/* 06/14/06 Support POLL STATUS LOOP*/
+{ IRPAUSE,	RESET,		0xF8, 5 },	/* Transitions from IRPAUSE */
+{ IRPAUSE,	IDLE,		0xC0, 3 },
+{ IRPAUSE,	DRPAUSE,	0xE8, 6 },
+{ DRPAUSE,	SHIFTDR,	0x80, 2 }, /* Extra transitions using SHIFTDR */
+{ IRPAUSE,	SHIFTDR,	0xE0, 5 },
+{ SHIFTDR,	DRPAUSE,	0x80, 2 },
+{ SHIFTDR,	IDLE,		0xC0, 3 },
+{ IRPAUSE,	SHIFTIR,	0x80, 2 },/* Extra transitions using SHIFTIR */
+{ SHIFTIR,	IRPAUSE,	0x80, 2 },
+{ SHIFTIR,	IDLE,		0xC0, 3 },
+{ DRPAUSE,	DRCAPTURE,	0xE0, 4 }, /* 11/15/05 Support DRCAPTURE*/
+{ DRCAPTURE, DRPAUSE,	0x80, 2 },
+{ IDLE,     DRCAPTURE,	0x80, 2 },
+{ IRPAUSE,  DRCAPTURE,  0xE0, 4 }
+};
+
+/*
+ *
+ * List to hold all LVDS pairs.
+ *
+ */
+
+LVDSPair *g_pLVDSList;
+unsigned short g_usLVDSPairCount;
+
+/*
+ *
+ * Function prototypes.
+ *
+ */
+
+static signed char ispVMDataCode(void);
+static long int ispVMDataSize(void);
+static void ispVMData(unsigned char *Data);
+static signed char ispVMShift(signed char Code);
+static signed char ispVMAmble(signed char Code);
+static signed char ispVMLoop(unsigned short a_usLoopCount);
+static signed char ispVMBitShift(signed char mode, unsigned short bits);
+static void ispVMComment(unsigned short a_usCommentSize);
+static void ispVMHeader(unsigned short a_usHeaderSize);
+static signed char ispVMLCOUNT(unsigned short a_usCountSize);
+static void ispVMClocks(unsigned short Clocks);
+static void ispVMBypass(signed char ScanType, unsigned short Bits);
+static void ispVMStateMachine(signed char NextState);
+static signed char ispVMSend(unsigned short int);
+static signed char ispVMRead(unsigned short int);
+static signed char ispVMReadandSave(unsigned short int);
+static signed char ispVMProcessLVDS(unsigned short a_usLVDSCount);
+static void ispVMMemManager(signed char types, unsigned short size);
+
+/*
+ *
+ * External variables and functions in hardware.c module
+ *
+ */
+static signed char g_cCurrentJTAGState;
+
+#ifdef DEBUG
+
+/*
+ *
+ * GetState
+ *
+ * Returns the state as a string based on the opcode. Only used
+ * for debugging purposes.
+ *
+ */
+
+const char *GetState(unsigned char a_ucState)
+{
+	switch (a_ucState) {
+	case RESET:
+		return "RESET";
+	case IDLE:
+		return "IDLE";
+	case IRPAUSE:
+		return "IRPAUSE";
+	case DRPAUSE:
+		return "DRPAUSE";
+	case SHIFTIR:
+		return "SHIFTIR";
+	case SHIFTDR:
+		return "SHIFTDR";
+	case DRCAPTURE:/* 11/15/05 support DRCAPTURE*/
+		return "DRCAPTURE";
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ *
+ * PrintData
+ *
+ * Prints the data. Only used for debugging purposes.
+ *
+ */
+
+void PrintData(unsigned short a_iDataSize, unsigned char *a_pucData)
+{
+	/* 09/11/07 NN added local variables initialization */
+	unsigned short usByteSize  = 0;
+	unsigned short usBitIndex  = 0;
+	signed short usByteIndex   = 0;
+	unsigned char ucByte       = 0;
+	unsigned char ucFlipByte   = 0;
+
+	if (a_iDataSize % 8) {
+		/* 09/11/07 NN Type cast mismatch variables */
+		usByteSize = (unsigned short)(a_iDataSize / 8 + 1);
+	} else {
+		/* 09/11/07 NN Type cast mismatch variables */
+		usByteSize = (unsigned short)(a_iDataSize / 8);
+	}
+	puts("(");
+	/* 09/11/07 NN Type cast mismatch variables */
+	for (usByteIndex = (signed short)(usByteSize - 1);
+		usByteIndex >= 0; usByteIndex--) {
+		ucByte = a_pucData[usByteIndex];
+		ucFlipByte = 0x00;
+
+		/*
+		*
+		* Flip each byte.
+		*
+		*/
+
+		for (usBitIndex = 0; usBitIndex < 8; usBitIndex++) {
+			ucFlipByte <<= 1;
+			if (ucByte & 0x1) {
+				ucFlipByte |= 0x1;
+			}
+
+			ucByte >>= 1;
+		}
+
+		/*
+		*
+		* Print the flipped byte.
+		*
+		*/
+
+		printf("%.02X", ucFlipByte);
+		if ((usByteSize - usByteIndex) % 40 == 39) {
+			puts("\n\t\t");
+		}
+		if (usByteIndex < 0)
+			break;
+	}
+	puts(")");
+}
+#endif /* DEBUG */
+
+void ispVMMemManager(signed char cTarget, unsigned short usSize)
+{
+	switch (cTarget) {
+	case XTDI:
+	case TDI:
+		if (g_pucInData != NULL) {
+			if (previous_size == usSize) {/*memory exist*/
+				break;
+			} else {
+				free(g_pucInData);
+				g_pucInData = NULL;
+			}
+		}
+		g_pucInData = (unsigned char *) malloc(usSize / 8 + 2);
+		previous_size = usSize;
+	case XTDO:
+	case TDO:
+		if (g_pucOutData != NULL) {
+			if (previous_size == usSize) { /*already exist*/
+				break;
+			} else {
+				free(g_pucOutData);
+				g_pucOutData = NULL;
+			}
+		}
+		g_pucOutData = (unsigned char *) malloc(usSize / 8 + 2);
+		previous_size = usSize;
+		break;
+	case MASK:
+		if (g_pucOutMaskData != NULL) {
+			if (previous_size == usSize) {/*already allocated*/
+				break;
+			} else {
+				free(g_pucOutMaskData);
+				g_pucOutMaskData = NULL;
+			}
+		}
+		g_pucOutMaskData = (unsigned char *) malloc(usSize / 8 + 2);
+		previous_size = usSize;
+		break;
+	case HIR:
+		if (g_pucHIRData != NULL) {
+			free(g_pucHIRData);
+			g_pucHIRData = NULL;
+		}
+		g_pucHIRData = (unsigned char *) malloc(usSize / 8 + 2);
+		break;
+	case TIR:
+		if (g_pucTIRData != NULL) {
+			free(g_pucTIRData);
+			g_pucTIRData = NULL;
+		}
+		g_pucTIRData = (unsigned char *) malloc(usSize / 8 + 2);
+		break;
+	case HDR:
+		if (g_pucHDRData != NULL) {
+			free(g_pucHDRData);
+			g_pucHDRData = NULL;
+		}
+		g_pucHDRData = (unsigned char *) malloc(usSize / 8 + 2);
+		break;
+	case TDR:
+		if (g_pucTDRData != NULL) {
+			free(g_pucTDRData);
+			g_pucTDRData = NULL;
+		}
+		g_pucTDRData = (unsigned char *) malloc(usSize / 8 + 2);
+		break;
+	case HEAP:
+		if (g_pucHeapMemory != NULL) {
+			free(g_pucHeapMemory);
+			g_pucHeapMemory = NULL;
+		}
+		g_pucHeapMemory = (unsigned char *) malloc(usSize + 2);
+		break;
+	case DMASK:
+		if (g_pucOutDMaskData != NULL) {
+			if (previous_size == usSize) { /*already allocated*/
+				break;
+			} else {
+				free(g_pucOutDMaskData);
+				g_pucOutDMaskData = NULL;
+			}
+		}
+		g_pucOutDMaskData = (unsigned char *) malloc(usSize / 8 + 2);
+		previous_size = usSize;
+		break;
+	case LHEAP:
+		if (g_pucIntelBuffer != NULL) {
+			free(g_pucIntelBuffer);
+			g_pucIntelBuffer = NULL;
+		}
+		g_pucIntelBuffer = (unsigned char *) malloc(usSize + 2);
+		break;
+	case LVDS:
+		if (g_pLVDSList != NULL) {
+			free(g_pLVDSList);
+			g_pLVDSList = NULL;
+		}
+		g_pLVDSList = (LVDSPair *) malloc(usSize * sizeof(LVDSPair));
+		if (g_pLVDSList)
+			memset(g_pLVDSList, 0, usSize * sizeof(LVDSPair));
+		break;
+	default:
+		return;
+    }
+}
+
+void ispVMFreeMem(void)
+{
+	if (g_pucHeapMemory != NULL) {
+		free(g_pucHeapMemory);
+		g_pucHeapMemory = NULL;
+	}
+
+	if (g_pucOutMaskData != NULL) {
+		free(g_pucOutMaskData);
+		g_pucOutMaskData = NULL;
+	}
+
+	if (g_pucInData != NULL) {
+		free(g_pucInData);
+		g_pucInData = NULL;
+	}
+
+	if (g_pucOutData != NULL) {
+		free(g_pucOutData);
+		g_pucOutData = NULL;
+	}
+
+	if (g_pucHIRData != NULL) {
+		free(g_pucHIRData);
+		g_pucHIRData = NULL;
+	}
+
+	if (g_pucTIRData != NULL) {
+		free(g_pucTIRData);
+		g_pucTIRData = NULL;
+	}
+
+	if (g_pucHDRData != NULL) {
+		free(g_pucHDRData);
+		g_pucHDRData = NULL;
+	}
+
+	if (g_pucTDRData != NULL) {
+		free(g_pucTDRData);
+		g_pucTDRData = NULL;
+	}
+
+	if (g_pucOutDMaskData != NULL) {
+		free(g_pucOutDMaskData);
+		g_pucOutDMaskData = NULL;
+	}
+
+	if (g_pucIntelBuffer != NULL) {
+		free(g_pucIntelBuffer);
+		g_pucIntelBuffer = NULL;
+	}
+
+	if (g_pLVDSList != NULL) {
+		free(g_pLVDSList);
+		g_pLVDSList = NULL;
+	}
+}
+
+
+/*
+ *
+ * ispVMDataSize
+ *
+ * Returns a VME-encoded number, usually used to indicate the
+ * bit length of an SIR/SDR command.
+ *
+ */
+
+long int ispVMDataSize()
+{
+	/* 09/11/07 NN added local variables initialization */
+	long int iSize           = 0;
+	signed char cCurrentByte = 0;
+	signed char cIndex       = 0;
+	cIndex = 0;
+	while ((cCurrentByte = GetByte()) & 0x80) {
+		iSize |= ((long int) (cCurrentByte & 0x7F)) << cIndex;
+		cIndex += 7;
+	}
+	iSize |= ((long int) (cCurrentByte & 0x7F)) << cIndex;
+	return iSize;
+}
+
+/*
+ *
+ * ispVMCode
+ *
+ * This is the heart of the embedded engine. All the high-level opcodes
+ * are extracted here. Once they have been identified, then it
+ * will call other functions to handle the processing.
+ *
+ */
+
+signed char ispVMCode()
+{
+	/* 09/11/07 NN added local variables initialization */
+	unsigned short iRepeatSize = 0;
+	signed char cOpcode	   = 0;
+	signed char cRetCode       = 0;
+	unsigned char ucState      = 0;
+	unsigned short usDelay     = 0;
+	unsigned short usToggle    = 0;
+	unsigned char usByte       = 0;
+
+	/*
+	*
+	* Check the compression flag only if this is the first time
+	* this function is entered. Do not check the compression flag if
+	* it is being called recursively from other functions within
+	* the embedded engine.
+	*
+	*/
+
+	if (!(g_usDataType & LHEAP_IN) && !(g_usDataType & HEAP_IN)) {
+		usByte = GetByte();
+		if (usByte == 0xf1) {
+			g_usDataType |= COMPRESS;
+		} else if (usByte == 0xf2) {
+			g_usDataType &= ~COMPRESS;
+		} else {
+			return VME_INVALID_FILE;
+		}
+	}
+
+	/*
+	*
+	* Begin looping through all the VME opcodes.
+	*
+	*/
+
+	while ((cOpcode = GetByte()) >= 0) {
+
+		switch (cOpcode) {
+		case STATE:
+
+			/*
+			 * Step the JTAG state machine.
+			 */
+
+			ucState = GetByte();
+
+			/*
+			 * Step the JTAG state machine to DRCAPTURE
+			 * to support Looping.
+			 */
+
+			if ((g_usDataType & LHEAP_IN) &&
+				 (ucState == DRPAUSE) &&
+				 (g_cCurrentJTAGState == ucState)) {
+				ispVMStateMachine(DRCAPTURE);
+			}
+
+			ispVMStateMachine(ucState);
+
+#ifdef DEBUG
+			if (g_usDataType & LHEAP_IN) {
+				debug("LDELAY %s ", GetState(ucState));
+			} else {
+				debug("STATE %s;\n", GetState(ucState));
+			}
+#endif /* DEBUG */
+			break;
+		case SIR:
+		case SDR:
+		case XSDR:
+
+#ifdef DEBUG
+			switch (cOpcode) {
+			case SIR:
+				puts("SIR ");
+				break;
+			case SDR:
+			case XSDR:
+				if (g_usDataType & LHEAP_IN) {
+					puts("LSDR ");
+				} else {
+					puts("SDR ");
+				}
+				break;
+			}
+#endif /* DEBUG */
+			/*
+			*
+			* Shift in data into the device.
+			*
+			*/
+
+			cRetCode = ispVMShift(cOpcode);
+			if (cRetCode != 0) {
+				return cRetCode;
+			}
+			break;
+		case WAIT:
+
+			/*
+			*
+			* Observe delay.
+			*
+			*/
+
+			/* 09/11/07 NN Type cast mismatch variables */
+			usDelay = (unsigned short) ispVMDataSize();
+			ispVMDelay(usDelay);
+
+#ifdef DEBUG
+			if (usDelay & 0x8000) {
+
+				/*
+				 * Since MSB is set, the delay time must be
+				 * decoded to millisecond. The SVF2VME encodes
+				 * the MSB to represent millisecond.
+				 */
+
+				usDelay &= ~0x8000;
+				if (g_usDataType & LHEAP_IN) {
+					printf("%.2E SEC;\n",
+						(float) usDelay / 1000);
+				} else {
+					printf("RUNTEST %.2E SEC;\n",
+						(float) usDelay / 1000);
+				}
+			} else {
+				/*
+				 * Since MSB is not set, the delay time
+				 * is given as microseconds.
+				 */
+
+				if (g_usDataType & LHEAP_IN) {
+					printf("%.2E SEC;\n",
+						(float) usDelay / 1000000);
+				} else {
+					printf("RUNTEST %.2E SEC;\n",
+						(float) usDelay / 1000000);
+				}
+			}
+#endif /* DEBUG */
+			break;
+		case TCK:
+
+			/*
+			 * Issue clock toggles.
+			*/
+
+			/* 09/11/07 NN Type cast mismatch variables */
+			usToggle = (unsigned short) ispVMDataSize();
+			ispVMClocks(usToggle);
+
+#ifdef DEBUG
+			printf("RUNTEST %d TCK;\n", usToggle);
+#endif /* DEBUG */
+			break;
+		case ENDDR:
+
+			/*
+			*
+			* Set the ENDDR.
+			*
+			*/
+
+			g_ucEndDR = GetByte();
+
+#ifdef DEBUG
+			printf("ENDDR %s;\n", GetState(g_ucEndDR));
+#endif /* DEBUG */
+			break;
+		case ENDIR:
+
+			/*
+			*
+			* Set the ENDIR.
+			*
+			*/
+
+			g_ucEndIR = GetByte();
+
+#ifdef DEBUG
+			printf("ENDIR %s;\n", GetState(g_ucEndIR));
+#endif /* DEBUG */
+			break;
+		case HIR:
+		case TIR:
+		case HDR:
+		case TDR:
+
+#ifdef DEBUG
+			switch (cOpcode) {
+			case HIR:
+				puts("HIR ");
+				break;
+			case TIR:
+				puts("TIR ");
+				break;
+			case HDR:
+				puts("HDR ");
+				break;
+			case TDR:
+				puts("TDR ");
+				break;
+			}
+#endif /* DEBUG */
+			/*
+			 * Set the header/trailer of the device in order
+			 * to bypass
+			 * successfully.
+			 */
+
+			cRetCode = ispVMAmble(cOpcode);
+			if (cRetCode != 0) {
+				return cRetCode;
+			}
+
+#ifdef DEBUG
+			puts(";\n");
+#endif /* DEBUG */
+			break;
+		case MEM:
+
+			/*
+			 * The maximum RAM required to support
+			 * processing one row of the VME file.
+			 */
+
+			/* 09/11/07 NN Type cast mismatch variables */
+			g_usMaxSize = (unsigned short) ispVMDataSize();
+
+#ifdef DEBUG
+			printf("// MEMSIZE %d\n", g_usMaxSize);
+#endif /* DEBUG */
+			break;
+		case VENDOR:
+
+			/*
+			*
+			* Set the VENDOR type.
+			*
+			*/
+
+			cOpcode = GetByte();
+			switch (cOpcode) {
+			case LATTICE:
+#ifdef DEBUG
+				puts("// VENDOR LATTICE\n");
+#endif /* DEBUG */
+				g_cVendor = LATTICE;
+				break;
+			case ALTERA:
+#ifdef DEBUG
+				puts("// VENDOR ALTERA\n");
+#endif /* DEBUG */
+				g_cVendor = ALTERA;
+				break;
+			case XILINX:
+#ifdef DEBUG
+				puts("// VENDOR XILINX\n");
+#endif /* DEBUG */
+				g_cVendor = XILINX;
+				break;
+			default:
+				break;
+			}
+			break;
+		case SETFLOW:
+
+			/*
+			 * Set the flow control. Flow control determines
+			 * the personality of the embedded engine.
+			 */
+
+			/* 09/11/07 NN Type cast mismatch variables */
+			g_usFlowControl |= (unsigned short) ispVMDataSize();
+			break;
+		case RESETFLOW:
+
+			/*
+			*
+			* Unset the flow control.
+			*
+			*/
+
+			/* 09/11/07 NN Type cast mismatch variables */
+			g_usFlowControl &= (unsigned short) ~(ispVMDataSize());
+			break;
+		case HEAP:
+
+			/*
+			*
+			* Allocate heap size to store loops.
+			*
+			*/
+
+			cRetCode = GetByte();
+			if (cRetCode != SECUREHEAP) {
+				return VME_INVALID_FILE;
+			}
+			/* 09/11/07 NN Type cast mismatch variables */
+			g_iHEAPSize = (unsigned short) ispVMDataSize();
+
+			/*
+			 * Store the maximum size of the HEAP buffer.
+			 * Used to convert VME to HEX.
+			 */
+
+			if (g_iHEAPSize > g_usHeapSize) {
+				g_usHeapSize = g_iHEAPSize;
+			}
+
+			ispVMMemManager(HEAP, (unsigned short) g_iHEAPSize);
+			break;
+		case REPEAT:
+
+			/*
+			*
+			* Execute loops.
+			*
+			*/
+
+			g_usRepeatLoops = 0;
+
+			/* 09/11/07 NN Type cast mismatch variables */
+			iRepeatSize = (unsigned short) ispVMDataSize();
+
+			cRetCode = ispVMLoop((unsigned short) iRepeatSize);
+			if (cRetCode != 0) {
+				return cRetCode;
+			}
+			break;
+		case ENDLOOP:
+
+			/*
+			*
+			* Exit point from processing loops.
+			*
+			*/
+
+			return cRetCode;
+		case ENDVME:
+
+			/*
+			 * The only valid exit point that indicates
+			 * end of programming.
+			 */
+
+			return cRetCode;
+		case SHR:
+
+			/*
+			*
+			* Right-shift address.
+			*
+			*/
+
+			g_usFlowControl |= SHIFTRIGHT;
+
+			/* 09/11/07 NN Type cast mismatch variables */
+			g_usShiftValue = (unsigned short) (g_usRepeatLoops *
+				(unsigned short)GetByte());
+			break;
+		case SHL:
+
+			/*
+			 * Left-shift address.
+			 */
+
+			g_usFlowControl |= SHIFTLEFT;
+
+			/* 09/11/07 NN Type cast mismatch variables */
+			g_usShiftValue = (unsigned short) (g_usRepeatLoops *
+				(unsigned short)GetByte());
+			break;
+		case FREQUENCY:
+
+			/*
+			*
+			* Set the frequency.
+			*
+			*/
+
+			/* 09/11/07 NN Type cast mismatch variables */
+			g_iFrequency = (int) (ispVMDataSize() / 1000);
+			if (g_iFrequency == 1)
+				g_iFrequency = 1000;
+
+#ifdef DEBUG
+			printf("FREQUENCY %.2E HZ;\n",
+				(float) g_iFrequency * 1000);
+#endif /* DEBUG */
+			break;
+		case LCOUNT:
+
+			/*
+			*
+			* Process LCOUNT command.
+			*
+			*/
+
+			cRetCode = ispVMLCOUNT((unsigned short)ispVMDataSize());
+			if (cRetCode != 0) {
+				return cRetCode;
+			}
+			break;
+		case VUES:
+
+			/*
+			*
+			* Set the flow control to verify USERCODE.
+			*
+			*/
+
+			g_usFlowControl |= VERIFYUES;
+			break;
+		case COMMENT:
+
+			/*
+			*
+			* Display comment.
+			*
+			*/
+
+			ispVMComment((unsigned short) ispVMDataSize());
+			break;
+		case LVDS:
+
+			/*
+			*
+			* Process LVDS command.
+			*
+			*/
+
+			ispVMProcessLVDS((unsigned short) ispVMDataSize());
+			break;
+		case HEADER:
+
+			/*
+			*
+			* Discard header.
+			*
+			*/
+
+			ispVMHeader((unsigned short) ispVMDataSize());
+			break;
+		/* 03/14/06 Support Toggle ispENABLE signal*/
+		case ispEN:
+			ucState = GetByte();
+			if ((ucState == ON) || (ucState == 0x01))
+				writePort(g_ucPinENABLE, 0x01);
+			else
+				writePort(g_ucPinENABLE, 0x00);
+			ispVMDelay(1);
+			break;
+		/* 05/24/06 support Toggle TRST pin*/
+		case TRST:
+			ucState = GetByte();
+			if (ucState == 0x01)
+				writePort(g_ucPinTRST, 0x01);
+			else
+				writePort(g_ucPinTRST, 0x00);
+			ispVMDelay(1);
+			break;
+		default:
+
+			/*
+			*
+			* Invalid opcode encountered.
+			*
+			*/
+
+#ifdef DEBUG
+			printf("\nINVALID OPCODE: 0x%.2X\n", cOpcode);
+#endif /* DEBUG */
+
+			return VME_INVALID_FILE;
+		}
+	}
+
+	/*
+	*
+	* Invalid exit point. Processing the token 'ENDVME' is the only
+	* valid way to exit the embedded engine.
+	*
+	*/
+
+	return VME_INVALID_FILE;
+}
+
+/*
+ *
+ * ispVMDataCode
+ *
+ * Processes the TDI/TDO/MASK/DMASK etc of an SIR/SDR command.
+ *
+ */
+
+signed char ispVMDataCode()
+{
+	/* 09/11/07 NN added local variables initialization */
+	signed char cDataByte    = 0;
+	signed char siDataSource = 0;  /*source of data from file by default*/
+
+	if (g_usDataType & HEAP_IN) {
+		siDataSource = 1;  /*the source of data from memory*/
+	}
+
+	/*
+	*
+	* Clear the data type register.
+	*
+	**/
+
+	g_usDataType &= ~(MASK_DATA + TDI_DATA +
+		TDO_DATA + DMASK_DATA + CMASK_DATA);
+
+	/*
+	 * Iterate through SIR/SDR command and look for TDI,
+	 * TDO, MASK, etc.
+	 */
+
+	while ((cDataByte = GetByte()) >= 0) {
+			ispVMMemManager(cDataByte, g_usMaxSize);
+			switch (cDataByte) {
+			case TDI:
+
+				/*
+				 * Store the maximum size of the TDI buffer.
+				 * Used to convert VME to HEX.
+				 */
+
+				if (g_usiDataSize > g_usTDISize) {
+					g_usTDISize = g_usiDataSize;
+				}
+				/*
+				 * Updated data type register to indicate that
+				 * TDI data is currently being used. Process the
+				 * data in the VME file into the TDI buffer.
+				 */
+
+				g_usDataType |= TDI_DATA;
+				ispVMData(g_pucInData);
+				break;
+			case XTDO:
+
+				/*
+				 * Store the maximum size of the TDO buffer.
+				 * Used to convert VME to HEX.
+				 */
+
+				if (g_usiDataSize > g_usTDOSize) {
+					g_usTDOSize = g_usiDataSize;
+				}
+
+				/*
+				 * Updated data type register to indicate that
+				 * TDO data is currently being used.
+				 */
+
+				g_usDataType |= TDO_DATA;
+				break;
+			case TDO:
+
+				/*
+				 * Store the maximum size of the TDO buffer.
+				 * Used to convert VME to HEX.
+				 */
+
+				if (g_usiDataSize > g_usTDOSize) {
+					g_usTDOSize = g_usiDataSize;
+				}
+
+				/*
+				 * Updated data type register to indicate
+				 * that TDO data is currently being used.
+				 * Process the data in the VME file into the
+				 * TDO buffer.
+				 */
+
+				g_usDataType |= TDO_DATA;
+				ispVMData(g_pucOutData);
+				break;
+			case MASK:
+
+				/*
+				 * Store the maximum size of the MASK buffer.
+				 * Used to convert VME to HEX.
+				 */
+
+				if (g_usiDataSize > g_usMASKSize) {
+					g_usMASKSize = g_usiDataSize;
+				}
+
+				/*
+				 * Updated data type register to indicate that
+				 * MASK data is currently being used. Process
+				 * the data in the VME file into the MASK buffer
+				 */
+
+				g_usDataType |= MASK_DATA;
+				ispVMData(g_pucOutMaskData);
+				break;
+			case DMASK:
+
+				/*
+				 * Store the maximum size of the DMASK buffer.
+				 * Used to convert VME to HEX.
+				 */
+
+				if (g_usiDataSize > g_usDMASKSize) {
+					g_usDMASKSize = g_usiDataSize;
+				}
+
+				/*
+				 * Updated data type register to indicate that
+				 * DMASK data is currently being used. Process
+				 * the data in the VME file into the DMASK
+				 * buffer.
+				 */
+
+				g_usDataType |= DMASK_DATA;
+				ispVMData(g_pucOutDMaskData);
+				break;
+			case CMASK:
+
+				/*
+				 * Updated data type register to indicate that
+				 * MASK data is currently being used. Process
+				 * the data in the VME file into the MASK buffer
+				 */
+
+				g_usDataType |= CMASK_DATA;
+				ispVMData(g_pucOutMaskData);
+				break;
+			case CONTINUE:
+				return 0;
+			default:
+				/*
+				 * Encountered invalid opcode.
+				 */
+				return VME_INVALID_FILE;
+			}
+
+			switch (cDataByte) {
+			case TDI:
+
+				/*
+				 * Left bit shift. Used when performing
+				 * algorithm looping.
+				 */
+
+				if (g_usFlowControl & SHIFTLEFT) {
+					ispVMBitShift(SHL, g_usShiftValue);
+					g_usFlowControl &= ~SHIFTLEFT;
+				}
+
+				/*
+				 * Right bit shift. Used when performing
+				 * algorithm looping.
+				 */
+
+				if (g_usFlowControl & SHIFTRIGHT) {
+					ispVMBitShift(SHR, g_usShiftValue);
+					g_usFlowControl &= ~SHIFTRIGHT;
+				}
+			default:
+				break;
+			}
+
+			if (siDataSource) {
+				g_usDataType |= HEAP_IN; /*restore from memory*/
+			}
+	}
+
+	if (siDataSource) {  /*fetch data from heap memory upon return*/
+		g_usDataType |= HEAP_IN;
+	}
+
+	if (cDataByte < 0) {
+
+		/*
+		 * Encountered invalid opcode.
+		 */
+
+		return VME_INVALID_FILE;
+	} else {
+		return 0;
+	}
+}
+
+/*
+ *
+ * ispVMData
+ * Extract one row of data operand from the current data type opcode. Perform
+ * the decompression if necessary. Extra RAM is not required for the
+ * decompression process. The decompression scheme employed in this module
+ * is on row by row basis. The format of the data stream:
+ * [compression code][compressed data stream]
+ * 0x00    --No compression
+ * 0x01    --Compress by 0x00.
+ *           Example:
+ *           Original stream:   0x000000000000000000000001
+ *           Compressed stream: 0x01000901
+ *           Detail:            0x01 is the code, 0x00 is the key,
+ *                              0x09 is the count of 0x00 bytes,
+ *                              0x01 is the uncompressed byte.
+ * 0x02    --Compress by 0xFF.
+ *           Example:
+ *           Original stream:   0xFFFFFFFFFFFFFFFFFFFFFF01
+ *           Compressed stream: 0x02FF0901
+ *           Detail:            0x02 is the code, 0xFF is the key,
+ *                              0x09 is the count of 0xFF bytes,
+ *                              0x01 is the uncompressed byte.
+ * 0x03
+ * : :
+ * 0xFE   -- Compress by nibble blocks.
+ *           Example:
+ *           Original stream:   0x84210842108421084210
+ *           Compressed stream: 0x0584210
+ *           Detail:            0x05 is the code, means 5 nibbles block.
+ *                              0x84210 is the 5 nibble blocks.
+ *                              The whole row is 80 bits given by g_usiDataSize.
+ *                              The number of times the block repeat itself
+ *                              is found by g_usiDataSize/(4*0x05) which is 4.
+ * 0xFF   -- Compress by the most frequently happen byte.
+ *           Example:
+ *           Original stream:   0x04020401030904040404
+ *           Compressed stream: 0xFF04(0,1,0x02,0,1,0x01,1,0x03,1,0x09,0,0,0)
+ *                          or: 0xFF044090181C240
+ *           Detail:            0xFF is the code, 0x04 is the key.
+ *                              a bit of 0 represent the key shall be put into
+ *                              the current bit position and a bit of 1
+ *                              represent copying the next of 8 bits of data
+ *                              in.
+ *
+ */
+
+void ispVMData(unsigned char *ByteData)
+{
+	/* 09/11/07 NN added local variables initialization */
+	unsigned short size               = 0;
+	unsigned short i, j, m, getData   = 0;
+	unsigned char cDataByte           = 0;
+	unsigned char compress            = 0;
+	unsigned short FFcount            = 0;
+	unsigned char compr_char          = 0xFF;
+	unsigned short index              = 0;
+	signed char compression           = 0;
+
+	/*convert number in bits to bytes*/
+	if (g_usiDataSize % 8 > 0) {
+		/* 09/11/07 NN Type cast mismatch variables */
+		size = (unsigned short)(g_usiDataSize / 8 + 1);
+	} else {
+		/* 09/11/07 NN Type cast mismatch variables */
+		size = (unsigned short)(g_usiDataSize / 8);
+	}
+
+	/*
+	 * If there is compression, then check if compress by key
+	 * of 0x00 or 0xFF or by other keys or by nibble blocks
+	 */
+
+	if (g_usDataType & COMPRESS) {
+		compression = 1;
+		compress = GetByte();
+		if ((compress  == VAR) && (g_usDataType & HEAP_IN)) {
+			getData = 1;
+			g_usDataType &= ~(HEAP_IN);
+			compress = GetByte();
+		}
+
+		switch (compress) {
+		case 0x00:
+			/* No compression */
+			compression = 0;
+			break;
+		case 0x01:
+			/* Compress by byte 0x00 */
+			compr_char = 0x00;
+			break;
+		case 0x02:
+			/* Compress by byte 0xFF */
+			compr_char = 0xFF;
+			break;
+		case 0xFF:
+			/* Huffman encoding */
+			compr_char = GetByte();
+			i = 8;
+			for (index = 0; index < size; index++) {
+				ByteData[index] = 0x00;
+				if (i > 7) {
+					cDataByte = GetByte();
+					i = 0;
+				}
+				if ((cDataByte << i++) & 0x80)
+					m = 8;
+				else {
+					ByteData[index] = compr_char;
+					m = 0;
+				}
+
+				for (j = 0; j < m; j++) {
+					if (i > 7) {
+						cDataByte = GetByte();
+						i = 0;
+					}
+					ByteData[index] |=
+					((cDataByte << i++) & 0x80) >> j;
+				}
+			}
+			size = 0;
+			break;
+		default:
+			for (index = 0; index < size; index++)
+				ByteData[index] = 0x00;
+			for (index = 0; index < compress; index++) {
+				if (index % 2 == 0)
+					cDataByte = GetByte();
+				for (i = 0; i < size * 2 / compress; i++) {
+					j = (unsigned short)(index +
+						(i * (unsigned short)compress));
+					/*clear the nibble to zero first*/
+					if (j%2) {
+						if (index % 2)
+							ByteData[j/2] |=
+								cDataByte & 0xF;
+						else
+							ByteData[j/2] |=
+								cDataByte >> 4;
+					} else {
+						if (index % 2)
+							ByteData[j/2] |=
+								cDataByte << 4;
+						else
+							ByteData[j/2] |=
+							cDataByte & 0xF0;
+					}
+				}
+			}
+			size = 0;
+			break;
+		}
+	}
+
+	FFcount = 0;
+
+	/* Decompress by byte 0x00 or 0xFF */
+	for (index = 0; index < size; index++) {
+		if (FFcount <= 0) {
+			cDataByte = GetByte();
+			if ((cDataByte == VAR) && (g_usDataType&HEAP_IN) &&
+				!getData && !(g_usDataType&COMPRESS)) {
+				getData = 1;
+				g_usDataType &= ~(HEAP_IN);
+				cDataByte = GetByte();
+			}
+			ByteData[index] = cDataByte;
+			if ((compression) && (cDataByte == compr_char))
+				/* 09/11/07 NN Type cast mismatch variables */
+				FFcount = (unsigned short) ispVMDataSize();
+				/*The number of 0xFF or 0x00 bytes*/
+		} else {
+			FFcount--; /*Use up the 0xFF chain first*/
+			ByteData[index] = compr_char;
+		}
+	}
+
+	if (getData) {
+		g_usDataType |= HEAP_IN;
+		getData = 0;
+	}
+}
+
+/*
+ *
+ * ispVMShift
+ *
+ * Processes the SDR/XSDR/SIR commands.
+ *
+ */
+
+signed char ispVMShift(signed char a_cCode)
+{
+	/* 09/11/07 NN added local variables initialization */
+	unsigned short iDataIndex  = 0;
+	unsigned short iReadLoop   = 0;
+	signed char cRetCode       = 0;
+
+	cRetCode = 0;
+	/* 09/11/07 NN Type cast mismatch variables */
+	g_usiDataSize = (unsigned short) ispVMDataSize();
+
+	/*clear the flags first*/
+	g_usDataType &= ~(SIR_DATA + EXPRESS + SDR_DATA);
+	switch (a_cCode) {
+	case SIR:
+		g_usDataType |= SIR_DATA;
+		/*
+		 * 1/15/04 If performing cascading, then go directly to SHIFTIR.
+		 *  Else, go to IRPAUSE before going to SHIFTIR
+		 */
+		if (g_usFlowControl & CASCADE) {
+			ispVMStateMachine(SHIFTIR);
+		} else {
+			ispVMStateMachine(IRPAUSE);
+			ispVMStateMachine(SHIFTIR);
+			if (g_usHeadIR > 0) {
+				ispVMBypass(HIR, g_usHeadIR);
+				sclock();
+			}
+		}
+		break;
+	case XSDR:
+		g_usDataType |= EXPRESS; /*mark simultaneous in and out*/
+	case SDR:
+		g_usDataType |= SDR_DATA;
+		/*
+		 * 1/15/04 If already in SHIFTDR, then do not move state or
+		 * shift in header.  This would imply that the previously
+		 * shifted frame was a cascaded frame.
+		 */
+		if (g_cCurrentJTAGState != SHIFTDR) {
+			/*
+			 * 1/15/04 If performing cascading, then go directly
+			 * to SHIFTDR.  Else, go to DRPAUSE before going
+			 * to SHIFTDR
+			 */
+			if (g_usFlowControl & CASCADE) {
+				if (g_cCurrentJTAGState == DRPAUSE) {
+					ispVMStateMachine(SHIFTDR);
+					/*
+					 * 1/15/04 If cascade flag has been seat
+					 * and the current state is DRPAUSE,
+					 * this implies that the first cascaded
+					 * frame is about to be shifted in.  The
+					 * header must be shifted prior to
+					 * shifting the first cascaded frame.
+					 */
+					if (g_usHeadDR > 0) {
+						ispVMBypass(HDR, g_usHeadDR);
+						sclock();
+					}
+				} else {
+					ispVMStateMachine(SHIFTDR);
+				}
+			} else {
+				ispVMStateMachine(DRPAUSE);
+				ispVMStateMachine(SHIFTDR);
+				if (g_usHeadDR > 0) {
+					ispVMBypass(HDR, g_usHeadDR);
+					sclock();
+				}
+			}
+		}
+		break;
+	default:
+		return VME_INVALID_FILE;
+	}
+
+	cRetCode = ispVMDataCode();
+
+	if (cRetCode != 0) {
+		return VME_INVALID_FILE;
+	}
+
+#ifdef DEBUG
+	printf("%d ", g_usiDataSize);
+
+	if (g_usDataType & TDI_DATA) {
+		puts("TDI ");
+		PrintData(g_usiDataSize, g_pucInData);
+	}
+
+	if (g_usDataType & TDO_DATA) {
+		puts("\n\t\tTDO ");
+		PrintData(g_usiDataSize, g_pucOutData);
+	}
+
+	if (g_usDataType & MASK_DATA) {
+		puts("\n\t\tMASK ");
+		PrintData(g_usiDataSize, g_pucOutMaskData);
+	}
+
+	if (g_usDataType & DMASK_DATA) {
+		puts("\n\t\tDMASK ");
+		PrintData(g_usiDataSize, g_pucOutDMaskData);
+	}
+
+	puts(";\n");
+#endif /* DEBUG */
+
+	if (g_usDataType & TDO_DATA || g_usDataType & DMASK_DATA) {
+		if (g_usDataType & DMASK_DATA) {
+			cRetCode = ispVMReadandSave(g_usiDataSize);
+			if (!cRetCode) {
+				if (g_usTailDR > 0) {
+					sclock();
+					ispVMBypass(TDR, g_usTailDR);
+				}
+				ispVMStateMachine(DRPAUSE);
+				ispVMStateMachine(SHIFTDR);
+				if (g_usHeadDR > 0) {
+					ispVMBypass(HDR, g_usHeadDR);
+					sclock();
+				}
+				for (iDataIndex = 0;
+					iDataIndex < g_usiDataSize / 8 + 1;
+					iDataIndex++)
+					g_pucInData[iDataIndex] =
+						g_pucOutData[iDataIndex];
+				g_usDataType &= ~(TDO_DATA + DMASK_DATA);
+				cRetCode = ispVMSend(g_usiDataSize);
+			}
+		} else {
+			cRetCode = ispVMRead(g_usiDataSize);
+			if (cRetCode == -1 && g_cVendor == XILINX) {
+				for (iReadLoop = 0; iReadLoop < 30;
+					iReadLoop++) {
+					cRetCode = ispVMRead(g_usiDataSize);
+					if (!cRetCode) {
+						break;
+					} else {
+						/* Always DRPAUSE */
+						ispVMStateMachine(DRPAUSE);
+						/*
+						 * Bypass other devices
+						 * when appropriate
+						 */
+						ispVMBypass(TDR, g_usTailDR);
+						ispVMStateMachine(g_ucEndDR);
+						ispVMStateMachine(IDLE);
+						ispVMDelay(1000);
+					}
+				}
+			}
+		}
+	} else { /*TDI only*/
+		cRetCode = ispVMSend(g_usiDataSize);
+	}
+
+	/*transfer the input data to the output buffer for the next verify*/
+	if ((g_usDataType & EXPRESS) || (a_cCode == SDR)) {
+		if (g_pucOutData) {
+			for (iDataIndex = 0; iDataIndex < g_usiDataSize / 8 + 1;
+				iDataIndex++)
+				g_pucOutData[iDataIndex] =
+					g_pucInData[iDataIndex];
+		}
+	}
+
+	switch (a_cCode) {
+	case SIR:
+		/* 1/15/04 If not performing cascading, then shift ENDIR */
+		if (!(g_usFlowControl & CASCADE)) {
+			if (g_usTailIR > 0) {
+				sclock();
+				ispVMBypass(TIR, g_usTailIR);
+			}
+			ispVMStateMachine(g_ucEndIR);
+		}
+		break;
+	case XSDR:
+	case SDR:
+		/* 1/15/04 If not performing cascading, then shift ENDDR */
+		if (!(g_usFlowControl & CASCADE)) {
+			if (g_usTailDR > 0) {
+				sclock();
+				ispVMBypass(TDR, g_usTailDR);
+			}
+			ispVMStateMachine(g_ucEndDR);
+		}
+		break;
+	default:
+		break;
+	}
+
+	return cRetCode;
+}
+
+/*
+ *
+ * ispVMAmble
+ *
+ * This routine is to extract Header and Trailer parameter for SIR and
+ * SDR operations.
+ *
+ * The Header and Trailer parameter are the pre-amble and post-amble bit
+ * stream need to be shifted into TDI or out of TDO of the devices. Mostly
+ * is for the purpose of bypassing the leading or trailing devices. ispVM
+ * supports only shifting data into TDI to bypass the devices.
+ *
+ * For a single device, the header and trailer parameters are all set to 0
+ * as default by ispVM. If it is for multiple devices, the header and trailer
+ * value will change as specified by the VME file.
+ *
+ */
+
+signed char ispVMAmble(signed char Code)
+{
+	signed char compress = 0;
+	/* 09/11/07 NN Type cast mismatch variables */
+	g_usiDataSize = (unsigned short)ispVMDataSize();
+
+#ifdef DEBUG
+	printf("%d", g_usiDataSize);
+#endif /* DEBUG */
+
+	if (g_usiDataSize) {
+
+		/*
+		 * Discard the TDI byte and set the compression bit in the data
+		 * type register to false if compression is set because TDI data
+		 * after HIR/HDR/TIR/TDR is not compressed.
+		 */
+
+		GetByte();
+		if (g_usDataType & COMPRESS) {
+			g_usDataType &= ~(COMPRESS);
+			compress = 1;
+		}
+	}
+
+	switch (Code) {
+	case HIR:
+
+		/*
+		 * Store the maximum size of the HIR buffer.
+		 * Used to convert VME to HEX.
+		 */
+
+		if (g_usiDataSize > g_usHIRSize) {
+			g_usHIRSize = g_usiDataSize;
+		}
+
+		/*
+		 * Assign the HIR value and allocate memory.
+		 */
+
+		g_usHeadIR = g_usiDataSize;
+		if (g_usHeadIR) {
+			ispVMMemManager(HIR, g_usHeadIR);
+			ispVMData(g_pucHIRData);
+
+#ifdef DEBUG
+			puts(" TDI ");
+			PrintData(g_usHeadIR, g_pucHIRData);
+#endif /* DEBUG */
+		}
+		break;
+	case TIR:
+
+		/*
+		 * Store the maximum size of the TIR buffer.
+		 * Used to convert VME to HEX.
+		 */
+
+		if (g_usiDataSize > g_usTIRSize) {
+			g_usTIRSize = g_usiDataSize;
+		}
+
+		/*
+		 * Assign the TIR value and allocate memory.
+		 */
+
+		g_usTailIR = g_usiDataSize;
+		if (g_usTailIR) {
+			ispVMMemManager(TIR, g_usTailIR);
+			ispVMData(g_pucTIRData);
+
+#ifdef DEBUG
+			puts(" TDI ");
+			PrintData(g_usTailIR, g_pucTIRData);
+#endif /* DEBUG */
+		}
+		break;
+	case HDR:
+
+		/*
+		 * Store the maximum size of the HDR buffer.
+		 * Used to convert VME to HEX.
+		 */
+
+		if (g_usiDataSize > g_usHDRSize) {
+			g_usHDRSize = g_usiDataSize;
+		}
+
+		/*
+		 * Assign the HDR value and allocate memory.
+		 *
+		 */
+
+		g_usHeadDR = g_usiDataSize;
+		if (g_usHeadDR) {
+			ispVMMemManager(HDR, g_usHeadDR);
+			ispVMData(g_pucHDRData);
+
+#ifdef DEBUG
+			puts(" TDI ");
+			PrintData(g_usHeadDR, g_pucHDRData);
+#endif /* DEBUG */
+		}
+		break;
+	case TDR:
+
+		/*
+		 * Store the maximum size of the TDR buffer.
+		 * Used to convert VME to HEX.
+		 */
+
+		if (g_usiDataSize > g_usTDRSize) {
+			g_usTDRSize = g_usiDataSize;
+		}
+
+		/*
+		 * Assign the TDR value and allocate memory.
+		 *
+		 */
+
+		g_usTailDR = g_usiDataSize;
+		if (g_usTailDR) {
+			ispVMMemManager(TDR, g_usTailDR);
+			ispVMData(g_pucTDRData);
+
+#ifdef DEBUG
+			puts(" TDI ");
+			PrintData(g_usTailDR, g_pucTDRData);
+#endif /* DEBUG */
+		}
+		break;
+	default:
+		break;
+	}
+
+	/*
+	*
+	* Re-enable compression if it was previously set.
+	*
+	**/
+
+	if (compress) {
+		g_usDataType |= COMPRESS;
+	}
+
+	if (g_usiDataSize) {
+		Code = GetByte();
+		if (Code == CONTINUE) {
+			return 0;
+		} else {
+
+			/*
+			 * Encountered invalid opcode.
+			 */
+
+			return VME_INVALID_FILE;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ *
+ * ispVMLoop
+ *
+ * Perform the function call upon by the REPEAT opcode.
+ * Memory is to be allocated to store the entire loop from REPEAT to ENDLOOP.
+ * After the loop is stored then execution begin. The REPEATLOOP flag is set
+ * on the g_usFlowControl register to indicate the repeat loop is in session
+ * and therefore fetch opcode from the memory instead of from the file.
+ *
+ */
+
+signed char ispVMLoop(unsigned short a_usLoopCount)
+{
+	/* 09/11/07 NN added local variables initialization */
+	signed char cRetCode      = 0;
+	unsigned short iHeapIndex = 0;
+	unsigned short iLoopIndex = 0;
+
+	g_usShiftValue = 0;
+	for (iHeapIndex = 0; iHeapIndex < g_iHEAPSize; iHeapIndex++) {
+		g_pucHeapMemory[iHeapIndex] = GetByte();
+	}
+
+	if (g_pucHeapMemory[iHeapIndex - 1] != ENDLOOP) {
+		return VME_INVALID_FILE;
+	}
+
+	g_usFlowControl |= REPEATLOOP;
+	g_usDataType |= HEAP_IN;
+
+	for (iLoopIndex = 0; iLoopIndex < a_usLoopCount; iLoopIndex++) {
+		g_iHeapCounter = 0;
+		cRetCode = ispVMCode();
+		g_usRepeatLoops++;
+		if (cRetCode < 0) {
+			break;
+		}
+	}
+
+	g_usDataType &= ~(HEAP_IN);
+	g_usFlowControl &= ~(REPEATLOOP);
+	return cRetCode;
+}
+
+/*
+ *
+ * ispVMBitShift
+ *
+ * Shift the TDI stream left or right by the number of bits. The data in
+ * *g_pucInData is of the VME format, so the actual shifting is the reverse of
+ * IEEE 1532 or SVF format.
+ *
+ */
+
+signed char ispVMBitShift(signed char mode, unsigned short bits)
+{
+	/* 09/11/07 NN added local variables initialization */
+	unsigned short i       = 0;
+	unsigned short size    = 0;
+	unsigned short tmpbits = 0;
+
+	if (g_usiDataSize % 8 > 0) {
+		/* 09/11/07 NN Type cast mismatch variables */
+		size = (unsigned short)(g_usiDataSize / 8 + 1);
+	} else {
+		/* 09/11/07 NN Type cast mismatch variables */
+		size = (unsigned short)(g_usiDataSize / 8);
+	}
+
+	switch (mode) {
+	case SHR:
+		for (i = 0; i < size; i++) {
+			if (g_pucInData[i] != 0) {
+				tmpbits = bits;
+				while (tmpbits > 0) {
+					g_pucInData[i] <<= 1;
+					if (g_pucInData[i] == 0) {
+						i--;
+						g_pucInData[i] = 1;
+					}
+					tmpbits--;
+				}
+			}
+		}
+		break;
+	case SHL:
+		for (i = 0; i < size; i++) {
+			if (g_pucInData[i] != 0) {
+				tmpbits = bits;
+				while (tmpbits > 0) {
+					g_pucInData[i] >>= 1;
+					if (g_pucInData[i] == 0) {
+						i--;
+						g_pucInData[i] = 8;
+					}
+					tmpbits--;
+				}
+			}
+		}
+		break;
+	default:
+		return VME_INVALID_FILE;
+	}
+
+	return 0;
+}
+
+/*
+ *
+ * ispVMComment
+ *
+ * Displays the SVF comments.
+ *
+ */
+
+void ispVMComment(unsigned short a_usCommentSize)
+{
+	char cCurByte = 0;
+	for (; a_usCommentSize > 0; a_usCommentSize--) {
+		/*
+		*
+		* Print character to the terminal.
+		*
+		**/
+		cCurByte = GetByte();
+		vme_out_char(cCurByte);
+	}
+	cCurByte = '\n';
+	vme_out_char(cCurByte);
+}
+
+/*
+ *
+ * ispVMHeader
+ *
+ * Iterate the length of the header and discard it.
+ *
+ */
+
+void ispVMHeader(unsigned short a_usHeaderSize)
+{
+	for (; a_usHeaderSize > 0; a_usHeaderSize--) {
+		GetByte();
+	}
+}
+
+/*
+ *
+ * ispVMCalculateCRC32
+ *
+ * Calculate the 32-bit CRC.
+ *
+ */
+
+void ispVMCalculateCRC32(unsigned char a_ucData)
+{
+	/* 09/11/07 NN added local variables initialization */
+	unsigned char ucIndex          = 0;
+	unsigned char ucFlipData       = 0;
+	unsigned short usCRCTableEntry = 0;
+	unsigned int crc_table[16] = {
+		0x0000, 0xCC01, 0xD801,
+		0x1400, 0xF001, 0x3C00,
+		0x2800, 0xE401, 0xA001,
+		0x6C00, 0x7800, 0xB401,
+		0x5000, 0x9C01, 0x8801,
+		0x4400
+	};
+
+	for (ucIndex = 0; ucIndex < 8; ucIndex++) {
+		ucFlipData <<= 1;
+		if (a_ucData & 0x01) {
+			ucFlipData |= 0x01;
+		}
+		a_ucData >>= 1;
+	}
+
+	/* 09/11/07 NN Type cast mismatch variables */
+	usCRCTableEntry = (unsigned short)(crc_table[g_usCalculatedCRC & 0xF]);
+	g_usCalculatedCRC = (unsigned short)((g_usCalculatedCRC >> 4) & 0x0FFF);
+	g_usCalculatedCRC = (unsigned short)(g_usCalculatedCRC ^
+			usCRCTableEntry ^ crc_table[ucFlipData & 0xF]);
+	usCRCTableEntry = (unsigned short)(crc_table[g_usCalculatedCRC & 0xF]);
+	g_usCalculatedCRC = (unsigned short)((g_usCalculatedCRC >> 4) & 0x0FFF);
+	g_usCalculatedCRC = (unsigned short)(g_usCalculatedCRC ^
+		usCRCTableEntry ^ crc_table[(ucFlipData >> 4) & 0xF]);
+}
+
+/*
+ *
+ * ispVMLCOUNT
+ *
+ * Process the intelligent programming loops.
+ *
+ */
+
+signed char ispVMLCOUNT(unsigned short a_usCountSize)
+{
+	unsigned short usContinue	  = 1;
+	unsigned short usIntelBufferIndex = 0;
+	unsigned short usCountIndex       = 0;
+	signed char cRetCode              = 0;
+	signed char cRepeatHeap           = 0;
+	signed char cOpcode               = 0;
+	unsigned char ucState             = 0;
+	unsigned short usDelay            = 0;
+	unsigned short usToggle           = 0;
+	unsigned char usByte              = 0;
+
+	g_usIntelBufferSize = (unsigned short)ispVMDataSize();
+
+	/*
+	 * Allocate memory for intel buffer.
+	 *
+	 */
+
+	ispVMMemManager(LHEAP, g_usIntelBufferSize);
+
+	/*
+	 * Store the maximum size of the intelligent buffer.
+	 * Used to convert VME to HEX.
+	 */
+
+	if (g_usIntelBufferSize > g_usLCOUNTSize) {
+		g_usLCOUNTSize = g_usIntelBufferSize;
+	}
+
+	/*
+	 * Copy intel data to the buffer.
+	 */
+
+	for (usIntelBufferIndex = 0; usIntelBufferIndex < g_usIntelBufferSize;
+		usIntelBufferIndex++) {
+		g_pucIntelBuffer[usIntelBufferIndex] = GetByte();
+	}
+
+	/*
+	 * Set the data type register to get data from the intelligent
+	 * data buffer.
+	 */
+
+	g_usDataType |= LHEAP_IN;
+
+	/*
+	*
+	* If the HEAP_IN flag is set, temporarily unset the flag so data will be
+	* retrieved from the status buffer.
+	*
+	**/
+
+	if (g_usDataType & HEAP_IN) {
+		g_usDataType &= ~HEAP_IN;
+		cRepeatHeap = 1;
+	}
+
+#ifdef DEBUG
+	printf("LCOUNT %d;\n", a_usCountSize);
+#endif /* DEBUG */
+
+	/*
+	 * Iterate through the intelligent programming command.
+	*/
+
+	for (usCountIndex = 0; usCountIndex < a_usCountSize; usCountIndex++) {
+
+		/*
+		*
+		* Initialize the intel data index to 0 before each iteration.
+		*
+		**/
+
+		g_usIntelDataIndex = 0;
+		cOpcode            = 0;
+		ucState            = 0;
+		usDelay            = 0;
+		usToggle           = 0;
+		usByte             = 0;
+		usContinue		   = 1;
+
+		/*
+		*
+		* Begin looping through all the VME opcodes.
+		*
+		*/
+		/*
+		* 4/1/09 Nguyen replaced the recursive function call codes on
+		*        the ispVMLCOUNT function
+		*
+		*/
+		while (usContinue) {
+			cOpcode = GetByte();
+			switch (cOpcode) {
+			case HIR:
+			case TIR:
+			case HDR:
+			case TDR:
+				/*
+				 * Set the header/trailer of the device in order
+				 * to bypass successfully.
+				 */
+
+				ispVMAmble(cOpcode);
+			break;
+			case STATE:
+
+				/*
+				 * Step the JTAG state machine.
+				 */
+
+				ucState = GetByte();
+				/*
+				 * Step the JTAG state machine to DRCAPTURE
+				 * to support Looping.
+				 */
+
+				if ((g_usDataType & LHEAP_IN) &&
+					 (ucState == DRPAUSE) &&
+					 (g_cCurrentJTAGState == ucState)) {
+					ispVMStateMachine(DRCAPTURE);
+				}
+				ispVMStateMachine(ucState);
+#ifdef DEBUG
+				printf("LDELAY %s ", GetState(ucState));
+#endif /* DEBUG */
+				break;
+			case SIR:
+#ifdef DEBUG
+				printf("SIR ");
+#endif /* DEBUG */
+				/*
+				 * Shift in data into the device.
+				 */
+
+				cRetCode = ispVMShift(cOpcode);
+				break;
+			case SDR:
+
+#ifdef DEBUG
+				printf("LSDR ");
+#endif /* DEBUG */
+				/*
+				 * Shift in data into the device.
+				 */
+
+				cRetCode = ispVMShift(cOpcode);
+				break;
+			case WAIT:
+
+				/*
+				*
+				* Observe delay.
+				*
+				*/
+
+				usDelay = (unsigned short)ispVMDataSize();
+				ispVMDelay(usDelay);
+
+#ifdef DEBUG
+				if (usDelay & 0x8000) {
+
+					/*
+					 * Since MSB is set, the delay time must
+					 * be decoded to millisecond. The
+					 * SVF2VME encodes the MSB to represent
+					 * millisecond.
+					 */
+
+					usDelay &= ~0x8000;
+					printf("%.2E SEC;\n",
+						(float) usDelay / 1000);
+				} else {
+					/*
+					 * Since MSB is not set, the delay time
+					 * is given as microseconds.
+					 */
+
+					printf("%.2E SEC;\n",
+						(float) usDelay / 1000000);
+				}
+#endif /* DEBUG */
+				break;
+			case TCK:
+
+				/*
+				 * Issue clock toggles.
+				 */
+
+				usToggle = (unsigned short)ispVMDataSize();
+				ispVMClocks(usToggle);
+
+#ifdef DEBUG
+				printf("RUNTEST %d TCK;\n", usToggle);
+#endif /* DEBUG */
+				break;
+			case ENDLOOP:
+
+				/*
+				 * Exit point from processing loops.
+				 */
+				usContinue = 0;
+				break;
+
+			case COMMENT:
+
+				/*
+				 * Display comment.
+				 */
+
+				ispVMComment((unsigned short) ispVMDataSize());
+				break;
+			case ispEN:
+				ucState = GetByte();
+				if ((ucState == ON) || (ucState == 0x01))
+					writePort(g_ucPinENABLE, 0x01);
+				else
+					writePort(g_ucPinENABLE, 0x00);
+				ispVMDelay(1);
+				break;
+			case TRST:
+				if (GetByte() == 0x01)
+					writePort(g_ucPinTRST, 0x01);
+				else
+					writePort(g_ucPinTRST, 0x00);
+				ispVMDelay(1);
+				break;
+			default:
+
+				/*
+				 * Invalid opcode encountered.
+				 */
+
+				debug("\nINVALID OPCODE: 0x%.2X\n", cOpcode);
+
+				return VME_INVALID_FILE;
+			}
+		}
+		if (cRetCode >= 0) {
+			/*
+			 * Break if intelligent programming is successful.
+			 */
+
+			break;
+		}
+
+	}
+	/*
+	 * If HEAP_IN flag was temporarily disabled,
+	 * re-enable it before exiting
+	 */
+
+	if (cRepeatHeap) {
+		g_usDataType |= HEAP_IN;
+	}
+
+	/*
+	 * Set the data type register to not get data from the
+	 * intelligent data buffer.
+	 */
+
+	g_usDataType &= ~LHEAP_IN;
+	return cRetCode;
+}
+/*
+ *
+ * ispVMClocks
+ *
+ * Applies the specified number of pulses to TCK.
+ *
+ */
+
+void ispVMClocks(unsigned short Clocks)
+{
+	unsigned short iClockIndex = 0;
+	for (iClockIndex = 0; iClockIndex < Clocks; iClockIndex++) {
+		sclock();
+	}
+}
+
+/*
+ *
+ * ispVMBypass
+ *
+ * This procedure takes care of the HIR, HDR, TIR, TDR for the
+ * purpose of putting the other devices into Bypass mode. The
+ * current state is checked to find out if it is at DRPAUSE or
+ * IRPAUSE. If it is at DRPAUSE, perform bypass register scan.
+ * If it is at IRPAUSE, scan into instruction registers the bypass
+ * instruction.
+ *
+ */
+
+void ispVMBypass(signed char ScanType, unsigned short Bits)
+{
+	/* 09/11/07 NN added local variables initialization */
+	unsigned short iIndex       = 0;
+	unsigned short iSourceIndex = 0;
+	unsigned char cBitState     = 0;
+	unsigned char cCurByte      = 0;
+	unsigned char *pcSource    = NULL;
+
+	if (Bits <= 0) {
+		return;
+	}
+
+	switch (ScanType) {
+	case HIR:
+		pcSource = g_pucHIRData;
+		break;
+	case TIR:
+		pcSource = g_pucTIRData;
+		break;
+	case HDR:
+		pcSource = g_pucHDRData;
+		break;
+	case TDR:
+		pcSource = g_pucTDRData;
+		break;
+	default:
+		break;
+	}
+
+	iSourceIndex = 0;
+	cBitState = 0;
+	for (iIndex = 0; iIndex < Bits - 1; iIndex++) {
+		/* Scan instruction or bypass register */
+		if (iIndex % 8 == 0) {
+			cCurByte = pcSource[iSourceIndex++];
+		}
+		cBitState = (unsigned char) (((cCurByte << iIndex % 8) & 0x80)
+			? 0x01 : 0x00);
+		writePort(g_ucPinTDI, cBitState);
+		sclock();
+	}
+
+	if (iIndex % 8 == 0)  {
+		cCurByte = pcSource[iSourceIndex++];
+	}
+
+	cBitState = (unsigned char) (((cCurByte << iIndex % 8) & 0x80)
+		? 0x01 : 0x00);
+	writePort(g_ucPinTDI, cBitState);
+}
+
+/*
+ *
+ * ispVMStateMachine
+ *
+ * This procedure steps all devices in the daisy chain from a given
+ * JTAG state to the next desirable state. If the next state is TLR,
+ * the JTAG state machine is brute forced into TLR by driving TMS
+ * high and pulse TCK 6 times.
+ *
+ */
+
+void ispVMStateMachine(signed char cNextJTAGState)
+{
+	/* 09/11/07 NN added local variables initialization */
+	signed char cPathIndex  = 0;
+	signed char cStateIndex = 0;
+
+	if ((g_cCurrentJTAGState == cNextJTAGState) &&
+		(cNextJTAGState != RESET)) {
+		return;
+	}
+
+	for (cStateIndex = 0; cStateIndex < 25; cStateIndex++) {
+		if ((g_cCurrentJTAGState ==
+			 g_JTAGTransistions[cStateIndex].CurState) &&
+			(cNextJTAGState ==
+				 g_JTAGTransistions[cStateIndex].NextState)) {
+			break;
+		}
+	}
+
+	g_cCurrentJTAGState = cNextJTAGState;
+	for (cPathIndex = 0;
+		cPathIndex < g_JTAGTransistions[cStateIndex].Pulses;
+		cPathIndex++) {
+		if ((g_JTAGTransistions[cStateIndex].Pattern << cPathIndex)
+			& 0x80) {
+			writePort(g_ucPinTMS, (unsigned char) 0x01);
+		} else {
+			writePort(g_ucPinTMS, (unsigned char) 0x00);
+		}
+		sclock();
+	}
+
+	writePort(g_ucPinTDI, 0x00);
+	writePort(g_ucPinTMS, 0x00);
+}
+
+/*
+ *
+ * ispVMStart
+ *
+ * Enable the port to the device and set the state to RESET (TLR).
+ *
+ */
+
+void ispVMStart()
+{
+#ifdef DEBUG
+	printf("// ISPVM EMBEDDED ADDED\n");
+	printf("STATE RESET;\n");
+#endif
+	g_usFlowControl	= 0;
+	g_usDataType = g_uiChecksumIndex = g_cCurrentJTAGState = 0;
+	g_usHeadDR = g_usHeadIR = g_usTailDR = g_usTailIR = 0;
+	g_usMaxSize = g_usShiftValue = g_usRepeatLoops = 0;
+	g_usTDOSize =  g_usMASKSize = g_usTDISize = 0;
+	g_usDMASKSize = g_usLCOUNTSize = g_usHDRSize = 0;
+	g_usTDRSize = g_usHIRSize = g_usTIRSize =  g_usHeapSize	= 0;
+	g_pLVDSList = NULL;
+	g_usLVDSPairCount = 0;
+	previous_size = 0;
+
+	ispVMStateMachine(RESET);    /*step devices to RESET state*/
+}
+
+/*
+ *
+ * ispVMEnd
+ *
+ * Set the state of devices to RESET to enable the devices and disable
+ * the port.
+ *
+ */
+
+void ispVMEnd()
+{
+#ifdef DEBUG
+	printf("// ISPVM EMBEDDED ADDED\n");
+	printf("STATE RESET;\n");
+	printf("RUNTEST 1.00E-001 SEC;\n");
+#endif
+
+	ispVMStateMachine(RESET);   /*step devices to RESET state */
+	ispVMDelay(1000);              /*wake up devices*/
+}
+
+/*
+ *
+ * ispVMSend
+ *
+ * Send the TDI data stream to devices. The data stream can be
+ * instructions or data.
+ *
+ */
+
+signed char ispVMSend(unsigned short a_usiDataSize)
+{
+	/* 09/11/07 NN added local variables initialization */
+	unsigned short iIndex       = 0;
+	unsigned short iInDataIndex = 0;
+	unsigned char cCurByte      = 0;
+	unsigned char cBitState     = 0;
+
+	for (iIndex = 0; iIndex < a_usiDataSize - 1; iIndex++) {
+		if (iIndex % 8 == 0) {
+			cCurByte = g_pucInData[iInDataIndex++];
+		}
+		cBitState = (unsigned char)(((cCurByte << iIndex % 8) & 0x80)
+			? 0x01 : 0x00);
+		writePort(g_ucPinTDI, cBitState);
+		sclock();
+	}
+
+	if (iIndex % 8 == 0) {
+		/* Take care of the last bit */
+		cCurByte = g_pucInData[iInDataIndex];
+	}
+
+	cBitState = (unsigned char) (((cCurByte << iIndex % 8) & 0x80)
+		? 0x01 : 0x00);
+
+	writePort(g_ucPinTDI, cBitState);
+	if (g_usFlowControl & CASCADE) {
+		/*1/15/04 Clock in last bit for the first n-1 cascaded frames */
+		sclock();
+	}
+
+	return 0;
+}
+
+/*
+ *
+ * ispVMRead
+ *
+ * Read the data stream from devices and verify.
+ *
+ */
+
+signed char ispVMRead(unsigned short a_usiDataSize)
+{
+	/* 09/11/07 NN added local variables initialization */
+	unsigned short usDataSizeIndex    = 0;
+	unsigned short usErrorCount       = 0;
+	unsigned short usLastBitIndex     = 0;
+	unsigned char cDataByte           = 0;
+	unsigned char cMaskByte           = 0;
+	unsigned char cInDataByte         = 0;
+	unsigned char cCurBit             = 0;
+	unsigned char cByteIndex          = 0;
+	unsigned short usBufferIndex      = 0;
+	unsigned char ucDisplayByte       = 0x00;
+	unsigned char ucDisplayFlag       = 0x01;
+	char StrChecksum[256]            = {0};
+	unsigned char g_usCalculateChecksum = 0x00;
+
+	/* 09/11/07 NN Type cast mismatch variables */
+	usLastBitIndex = (unsigned short)(a_usiDataSize - 1);
+
+#ifndef DEBUG
+	/*
+	 * If mask is not all zeros, then set the display flag to 0x00,
+	 * otherwise it shall be set to 0x01 to indicate that data read
+	 * from the device shall be displayed. If DEBUG is defined,
+	 * always display data.
+	 */
+
+	for (usDataSizeIndex = 0; usDataSizeIndex < (a_usiDataSize + 7) / 8;
+		usDataSizeIndex++) {
+		if (g_usDataType & MASK_DATA) {
+			if (g_pucOutMaskData[usDataSizeIndex] != 0x00) {
+				ucDisplayFlag = 0x00;
+				break;
+			}
+		} else if (g_usDataType & CMASK_DATA) {
+			g_usCalculateChecksum = 0x01;
+			ucDisplayFlag = 0x00;
+			break;
+		} else {
+			ucDisplayFlag = 0x00;
+			break;
+		}
+	}
+#endif /* DEBUG */
+
+	/*
+	*
+	* Begin shifting data in and out of the device.
+	*
+	**/
+
+	for (usDataSizeIndex = 0; usDataSizeIndex < a_usiDataSize;
+		usDataSizeIndex++) {
+		if (cByteIndex == 0) {
+
+			/*
+			 * Grab byte from TDO buffer.
+			 */
+
+			if (g_usDataType & TDO_DATA) {
+				cDataByte = g_pucOutData[usBufferIndex];
+			}
+
+			/*
+			 * Grab byte from MASK buffer.
+			 */
+
+			if (g_usDataType & MASK_DATA) {
+				cMaskByte = g_pucOutMaskData[usBufferIndex];
+			} else {
+				cMaskByte = 0xFF;
+			}
+
+			/*
+			 * Grab byte from CMASK buffer.
+			 */
+
+			if (g_usDataType & CMASK_DATA) {
+				cMaskByte = 0x00;
+				g_usCalculateChecksum = 0x01;
+			}
+
+			/*
+			 * Grab byte from TDI buffer.
+			 */
+
+			if (g_usDataType & TDI_DATA) {
+				cInDataByte = g_pucInData[usBufferIndex];
+			}
+
+			usBufferIndex++;
+		}
+
+		cCurBit = readPort();
+
+		if (ucDisplayFlag) {
+			ucDisplayByte <<= 1;
+			ucDisplayByte |= cCurBit;
+		}
+
+		/*
+		 * Check if data read from port matches with expected TDO.
+		 */
+
+		if (g_usDataType & TDO_DATA) {
+			/* 08/28/08 NN Added Calculate checksum support. */
+			if (g_usCalculateChecksum) {
+				if (cCurBit == 0x01)
+					g_usChecksum +=
+						(1 << (g_uiChecksumIndex % 8));
+				g_uiChecksumIndex++;
+			} else {
+				if ((((cMaskByte << cByteIndex) & 0x80)
+					? 0x01 : 0x00)) {
+					if (cCurBit != (unsigned char)
+					(((cDataByte << cByteIndex) & 0x80)
+						? 0x01 : 0x00)) {
+						usErrorCount++;
+					}
+				}
+			}
+		}
+
+		/*
+		 * Write TDI data to the port.
+		 */
+
+		writePort(g_ucPinTDI,
+			(unsigned char)(((cInDataByte << cByteIndex) & 0x80)
+				? 0x01 : 0x00));
+
+		if (usDataSizeIndex < usLastBitIndex) {
+
+			/*
+			 * Clock data out from the data shift register.
+			 */
+
+			sclock();
+		} else if (g_usFlowControl & CASCADE) {
+
+			/*
+			 * Clock in last bit for the first N - 1 cascaded frames
+			 */
+
+			sclock();
+		}
+
+		/*
+		 * Increment the byte index. If it exceeds 7, then reset it back
+		 * to zero.
+		 */
+
+		cByteIndex++;
+		if (cByteIndex >= 8) {
+			if (ucDisplayFlag) {
+
+			/*
+			 * Store displayed data in the TDO buffer. By reusing
+			 * the TDO buffer to store displayed data, there is no
+			 * need to allocate a buffer simply to hold display
+			 * data. This will not cause any false verification
+			 * errors because the true TDO byte has already
+			 * been consumed.
+			 */
+
+				g_pucOutData[usBufferIndex - 1] = ucDisplayByte;
+				ucDisplayByte = 0;
+			}
+
+			cByteIndex = 0;
+		}
+		/* 09/12/07 Nguyen changed to display the 1 bit expected data */
+		else if (a_usiDataSize == 1) {
+			if (ucDisplayFlag) {
+
+				/*
+				 * Store displayed data in the TDO buffer.
+				 * By reusing the TDO buffer to store displayed
+				 * data, there is no need to allocate
+				 * a buffer simply to hold display data. This
+				 * will not cause any false verification errors
+				 * because the true TDO byte has already
+				 * been consumed.
+				 */
+
+				/*
+				 * Flip ucDisplayByte and store it in cDataByte.
+				 */
+				cDataByte = 0x00;
+				for (usBufferIndex = 0; usBufferIndex < 8;
+					usBufferIndex++) {
+					cDataByte <<= 1;
+					if (ucDisplayByte & 0x01) {
+						cDataByte |= 0x01;
+					}
+					ucDisplayByte >>= 1;
+				}
+				g_pucOutData[0] = cDataByte;
+				ucDisplayByte = 0;
+			}
+
+			cByteIndex = 0;
+		}
+	}
+
+	if (ucDisplayFlag) {
+
+#ifdef DEBUG
+		debug("RECEIVED TDO (");
+#else
+		vme_out_string("Display Data: 0x");
+#endif /* DEBUG */
+
+		/* 09/11/07 NN Type cast mismatch variables */
+		for (usDataSizeIndex = (unsigned short)
+				((a_usiDataSize + 7) / 8);
+			usDataSizeIndex > 0 ; usDataSizeIndex--) {
+			cMaskByte = g_pucOutData[usDataSizeIndex - 1];
+			cDataByte = 0x00;
+
+			/*
+			 * Flip cMaskByte and store it in cDataByte.
+			 */
+
+			for (usBufferIndex = 0; usBufferIndex < 8;
+				usBufferIndex++) {
+				cDataByte <<= 1;
+				if (cMaskByte & 0x01) {
+					cDataByte |= 0x01;
+				}
+				cMaskByte >>= 1;
+			}
+#ifdef DEBUG
+			printf("%.2X", cDataByte);
+			if ((((a_usiDataSize + 7) / 8) - usDataSizeIndex)
+				% 40 == 39) {
+				printf("\n\t\t");
+			}
+#else
+			vme_out_hex(cDataByte);
+#endif /* DEBUG */
+		}
+
+#ifdef DEBUG
+		printf(")\n\n");
+#else
+		vme_out_string("\n\n");
+#endif /* DEBUG */
+		/* 09/02/08 Nguyen changed to display the data Checksum */
+		if (g_usChecksum != 0) {
+			g_usChecksum &= 0xFFFF;
+			sprintf(StrChecksum, "Data Checksum: %.4lX\n\n",
+				g_usChecksum);
+			vme_out_string(StrChecksum);
+			g_usChecksum = 0;
+		}
+	}
+
+	if (usErrorCount > 0) {
+		if (g_usFlowControl & VERIFYUES) {
+			vme_out_string(
+				"USERCODE verification failed.   "
+				"Continue programming......\n\n");
+			g_usFlowControl &= ~(VERIFYUES);
+			return 0;
+		} else {
+
+#ifdef DEBUG
+			printf("TOTAL ERRORS: %d\n", usErrorCount);
+#endif /* DEBUG */
+
+			return VME_VERIFICATION_FAILURE;
+		}
+	} else {
+		if (g_usFlowControl & VERIFYUES) {
+			vme_out_string("USERCODE verification passed.    "
+				"Programming aborted.\n\n");
+			g_usFlowControl &= ~(VERIFYUES);
+			return 1;
+		} else {
+			return 0;
+		}
+	}
+}
+
+/*
+ *
+ * ispVMReadandSave
+ *
+ * Support dynamic I/O.
+ *
+ */
+
+signed char ispVMReadandSave(unsigned short int a_usiDataSize)
+{
+	/* 09/11/07 NN added local variables initialization */
+	unsigned short int usDataSizeIndex = 0;
+	unsigned short int usLastBitIndex  = 0;
+	unsigned short int usBufferIndex   = 0;
+	unsigned short int usOutBitIndex   = 0;
+	unsigned short int usLVDSIndex     = 0;
+	unsigned char cDataByte            = 0;
+	unsigned char cDMASKByte           = 0;
+	unsigned char cInDataByte          = 0;
+	unsigned char cCurBit              = 0;
+	unsigned char cByteIndex           = 0;
+	signed char cLVDSByteIndex         = 0;
+
+	/* 09/11/07 NN Type cast mismatch variables */
+	usLastBitIndex = (unsigned short) (a_usiDataSize - 1);
+
+	/*
+	*
+	* Iterate through the data bits.
+	*
+	*/
+
+	for (usDataSizeIndex = 0; usDataSizeIndex < a_usiDataSize;
+		usDataSizeIndex++) {
+		if (cByteIndex == 0) {
+
+			/*
+			 * Grab byte from DMASK buffer.
+			 */
+
+			if (g_usDataType & DMASK_DATA) {
+				cDMASKByte = g_pucOutDMaskData[usBufferIndex];
+			} else {
+				cDMASKByte = 0x00;
+			}
+
+			/*
+			 * Grab byte from TDI buffer.
+			 */
+
+			if (g_usDataType & TDI_DATA) {
+				cInDataByte = g_pucInData[usBufferIndex];
+			}
+
+			usBufferIndex++;
+		}
+
+		cCurBit = readPort();
+		cDataByte = (unsigned char)(((cInDataByte << cByteIndex) & 0x80)
+			? 0x01 : 0x00);
+
+		/*
+		 * Initialize the byte to be zero.
+		 */
+
+		if (usOutBitIndex % 8 == 0) {
+			g_pucOutData[usOutBitIndex / 8] = 0x00;
+		}
+
+		/*
+		 * Use TDI, DMASK, and device TDO to create new TDI (actually
+		 * stored in g_pucOutData).
+		 */
+
+		if ((((cDMASKByte << cByteIndex) & 0x80) ? 0x01 : 0x00)) {
+
+			if (g_pLVDSList) {
+				for (usLVDSIndex = 0;
+					 usLVDSIndex < g_usLVDSPairCount;
+					usLVDSIndex++) {
+					if (g_pLVDSList[usLVDSIndex].
+						usNegativeIndex ==
+						usDataSizeIndex) {
+						g_pLVDSList[usLVDSIndex].
+							ucUpdate = 0x01;
+						break;
+					}
+				}
+			}
+
+			/*
+			 * DMASK bit is 1, use TDI.
+			 */
+
+			g_pucOutData[usOutBitIndex / 8] |= (unsigned char)
+				(((cDataByte & 0x1) ? 0x01 : 0x00) <<
+				(7 - usOutBitIndex % 8));
+		} else {
+
+			/*
+			 * DMASK bit is 0, use device TDO.
+			 */
+
+			g_pucOutData[usOutBitIndex / 8] |= (unsigned char)
+				(((cCurBit & 0x1) ? 0x01 : 0x00) <<
+				(7 - usOutBitIndex % 8));
+		}
+
+		/*
+		 * Shift in TDI in order to get TDO out.
+		 */
+
+		usOutBitIndex++;
+		writePort(g_ucPinTDI, cDataByte);
+		if (usDataSizeIndex < usLastBitIndex) {
+			sclock();
+		}
+
+		/*
+		 * Increment the byte index. If it exceeds 7, then reset it back
+		 * to zero.
+		 */
+
+		cByteIndex++;
+		if (cByteIndex >= 8) {
+			cByteIndex = 0;
+		}
+	}
+
+	/*
+	 * If g_pLVDSList exists and pairs need updating, then update
+	 * the negative-pair to receive the flipped positive-pair value.
+	 */
+
+	if (g_pLVDSList) {
+		for (usLVDSIndex = 0; usLVDSIndex < g_usLVDSPairCount;
+			usLVDSIndex++) {
+			if (g_pLVDSList[usLVDSIndex].ucUpdate) {
+
+				/*
+				 * Read the positive value and flip it.
+				 */
+
+				cDataByte = (unsigned char)
+				 (((g_pucOutData[g_pLVDSList[usLVDSIndex].
+					usPositiveIndex / 8]
+					<< (g_pLVDSList[usLVDSIndex].
+					usPositiveIndex % 8)) & 0x80) ?
+					0x01 : 0x00);
+				/* 09/11/07 NN Type cast mismatch variables */
+				cDataByte = (unsigned char) (!cDataByte);
+
+				/*
+				 * Get the byte that needs modification.
+				 */
+
+				cInDataByte =
+				g_pucOutData[g_pLVDSList[usLVDSIndex].
+					usNegativeIndex / 8];
+
+				if (cDataByte) {
+
+					/*
+					 * Copy over the current byte and
+					 * set the negative bit to 1.
+					 */
+
+					cDataByte = 0x00;
+					for (cLVDSByteIndex = 7;
+						cLVDSByteIndex >= 0;
+						cLVDSByteIndex--) {
+						cDataByte <<= 1;
+						if (7 -
+						(g_pLVDSList[usLVDSIndex].
+							usNegativeIndex % 8) ==
+							cLVDSByteIndex) {
+
+							/*
+							 * Set negative bit to 1
+							 */
+
+							cDataByte |= 0x01;
+						} else if (cInDataByte & 0x80) {
+							cDataByte |= 0x01;
+						}
+
+						cInDataByte <<= 1;
+					}
+
+					/*
+					 * Store the modified byte.
+					 */
+
+					g_pucOutData[g_pLVDSList[usLVDSIndex].
+					usNegativeIndex / 8] = cDataByte;
+				} else {
+
+					/*
+					 * Copy over the current byte and set
+					 * the negative bit to 0.
+					 */
+
+					cDataByte = 0x00;
+					for (cLVDSByteIndex = 7;
+						cLVDSByteIndex >= 0;
+						cLVDSByteIndex--) {
+						cDataByte <<= 1;
+						if (7 -
+						(g_pLVDSList[usLVDSIndex].
+						usNegativeIndex % 8) ==
+						cLVDSByteIndex) {
+
+							/*
+							 * Set negative bit to 0
+							 */
+
+							cDataByte |= 0x00;
+						} else if (cInDataByte & 0x80) {
+							cDataByte |= 0x01;
+						}
+
+						cInDataByte <<= 1;
+					}
+
+					/*
+					 * Store the modified byte.
+					 */
+
+					g_pucOutData[g_pLVDSList[usLVDSIndex].
+					usNegativeIndex / 8] = cDataByte;
+				}
+
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+signed char ispVMProcessLVDS(unsigned short a_usLVDSCount)
+{
+	unsigned short usLVDSIndex = 0;
+
+	/*
+	 * Allocate memory to hold LVDS pairs.
+	 */
+
+	ispVMMemManager(LVDS, a_usLVDSCount);
+	g_usLVDSPairCount = a_usLVDSCount;
+
+#ifdef DEBUG
+	printf("LVDS %d (", a_usLVDSCount);
+#endif /* DEBUG */
+
+	/*
+	 * Iterate through each given LVDS pair.
+	 */
+
+	for (usLVDSIndex = 0; usLVDSIndex < g_usLVDSPairCount; usLVDSIndex++) {
+
+		/*
+		 * Assign the positive and negative indices of the LVDS pair.
+		 */
+
+		/* 09/11/07 NN Type cast mismatch variables */
+		g_pLVDSList[usLVDSIndex].usPositiveIndex =
+			(unsigned short) ispVMDataSize();
+		/* 09/11/07 NN Type cast mismatch variables */
+		g_pLVDSList[usLVDSIndex].usNegativeIndex =
+			(unsigned short)ispVMDataSize();
+
+#ifdef DEBUG
+		if (usLVDSIndex < g_usLVDSPairCount - 1) {
+			printf("%d:%d, ",
+				g_pLVDSList[usLVDSIndex].usPositiveIndex,
+				g_pLVDSList[usLVDSIndex].usNegativeIndex);
+		} else {
+			printf("%d:%d",
+				g_pLVDSList[usLVDSIndex].usPositiveIndex,
+				g_pLVDSList[usLVDSIndex].usNegativeIndex);
+		}
+#endif /* DEBUG */
+
+	}
+
+#ifdef DEBUG
+	printf(");\n", a_usLVDSCount);
+#endif /* DEBUG */
+
+	return 0;
+}
diff --git a/drivers/fpga/lattice.c b/drivers/fpga/lattice.c
new file mode 100644
index 00000000000..a0e78231024
--- /dev/null
+++ b/drivers/fpga/lattice.c
@@ -0,0 +1,399 @@
+/*
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ *
+ * ispVM functions adapted from Lattice's ispmVMEmbedded code:
+ * Copyright 2009 Lattice Semiconductor Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <fpga.h>
+#include <lattice.h>
+
+static lattice_board_specific_func *pfns;
+static char *fpga_image;
+static unsigned long read_bytes;
+static unsigned long bufsize;
+static unsigned short expectedCRC;
+
+/*
+ * External variables and functions declared in ivm_core.c module.
+ */
+extern unsigned short g_usCalculatedCRC;
+extern unsigned short g_usDataType;
+extern unsigned char *g_pucIntelBuffer;
+extern unsigned char *g_pucHeapMemory;
+extern unsigned short g_iHeapCounter;
+extern unsigned short g_iHEAPSize;
+extern unsigned short g_usIntelDataIndex;
+extern unsigned short g_usIntelBufferSize;
+extern char *const g_szSupportedVersions[];
+
+
+/*
+ * ispVMDelay
+ *
+ * Users must implement a delay to observe a_usTimeDelay, where
+ * bit 15 of the a_usTimeDelay defines the unit.
+ *      1 = milliseconds
+ *      0 = microseconds
+ * Example:
+ *      a_usTimeDelay = 0x0001 = 1 microsecond delay.
+ *      a_usTimeDelay = 0x8001 = 1 millisecond delay.
+ *
+ * This subroutine is called upon to provide a delay from 1 millisecond to a few
+ * hundreds milliseconds each time.
+ * It is understood that due to a_usTimeDelay is defined as unsigned short, a 16
+ * bits integer, this function is restricted to produce a delay to 64000
+ * micro-seconds or 32000 milli-second maximum. The VME file will never pass on
+ * to this function a delay time > those maximum number. If it needs more than
+ * those maximum, the VME file will launch the delay function several times to
+ * realize a larger delay time cummulatively.
+ * It is perfectly alright to provide a longer delay than required. It is not
+ * acceptable if the delay is shorter.
+ */
+void ispVMDelay(unsigned short delay)
+{
+	if (delay & 0x8000)
+		delay = (delay & ~0x8000) * 1000;
+	udelay(delay);
+}
+
+void writePort(unsigned char a_ucPins, unsigned char a_ucValue)
+{
+	a_ucValue = a_ucValue ? 1 : 0;
+
+	switch (a_ucPins) {
+	case g_ucPinTDI:
+		pfns->jtag_set_tdi(a_ucValue);
+		break;
+	case g_ucPinTCK:
+		pfns->jtag_set_tck(a_ucValue);
+		break;
+	case g_ucPinTMS:
+		pfns->jtag_set_tms(a_ucValue);
+		break;
+	default:
+		printf("%s: requested unknown pin\n", __func__);
+	}
+}
+
+unsigned char readPort(void)
+{
+	return pfns->jtag_get_tdo();
+}
+
+void sclock(void)
+{
+	writePort(g_ucPinTCK, 0x01);
+	writePort(g_ucPinTCK, 0x00);
+}
+
+void calibration(void)
+{
+	/* Apply 2 pulses to TCK. */
+	writePort(g_ucPinTCK, 0x00);
+	writePort(g_ucPinTCK, 0x01);
+	writePort(g_ucPinTCK, 0x00);
+	writePort(g_ucPinTCK, 0x01);
+	writePort(g_ucPinTCK, 0x00);
+
+	ispVMDelay(0x8001);
+
+	/* Apply 2 pulses to TCK. */
+	writePort(g_ucPinTCK, 0x01);
+	writePort(g_ucPinTCK, 0x00);
+	writePort(g_ucPinTCK, 0x01);
+	writePort(g_ucPinTCK, 0x00);
+}
+
+/*
+ * GetByte
+ *
+ * Returns a byte to the caller. The returned byte depends on the
+ * g_usDataType register. If the HEAP_IN bit is set, then the byte
+ * is returned from the HEAP. If the LHEAP_IN bit is set, then
+ * the byte is returned from the intelligent buffer. Otherwise,
+ * the byte is returned directly from the VME file.
+ */
+unsigned char GetByte(void)
+{
+	unsigned char ucData;
+	unsigned int block_size = 4 * 1024;
+
+	if (g_usDataType & HEAP_IN) {
+
+		/*
+		 * Get data from repeat buffer.
+		 */
+
+		if (g_iHeapCounter > g_iHEAPSize) {
+
+			/*
+			 * Data over-run.
+			 */
+
+			return 0xFF;
+		}
+
+		ucData = g_pucHeapMemory[g_iHeapCounter++];
+	} else if (g_usDataType & LHEAP_IN) {
+
+		/*
+		 * Get data from intel buffer.
+		 */
+
+		if (g_usIntelDataIndex >= g_usIntelBufferSize) {
+			return 0xFF;
+		}
+
+		ucData = g_pucIntelBuffer[g_usIntelDataIndex++];
+	} else {
+		if (read_bytes == bufsize) {
+			return 0xFF;
+		}
+		ucData = *fpga_image++;
+		read_bytes++;
+
+		if (!(read_bytes % block_size)) {
+			printf("Downloading FPGA %ld/%ld completed\r",
+				read_bytes,
+				bufsize);
+		}
+
+		if (expectedCRC != 0) {
+			ispVMCalculateCRC32(ucData);
+		}
+	}
+
+	return ucData;
+}
+
+signed char ispVM(void)
+{
+	char szFileVersion[9]      = { 0 };
+	signed char cRetCode         = 0;
+	signed char cIndex           = 0;
+	signed char cVersionIndex    = 0;
+	unsigned char ucReadByte     = 0;
+	unsigned short crc;
+
+	g_pucHeapMemory		= NULL;
+	g_iHeapCounter		= 0;
+	g_iHEAPSize		= 0;
+	g_usIntelDataIndex	= 0;
+	g_usIntelBufferSize	= 0;
+	g_usCalculatedCRC = 0;
+	expectedCRC   = 0;
+	ucReadByte = GetByte();
+	switch (ucReadByte) {
+	case FILE_CRC:
+		crc = (unsigned char)GetByte();
+		crc <<= 8;
+		crc |= GetByte();
+		expectedCRC = crc;
+
+		for (cIndex = 0; cIndex < 8; cIndex++)
+			szFileVersion[cIndex] = GetByte();
+
+		break;
+	default:
+		szFileVersion[0] = (signed char) ucReadByte;
+		for (cIndex = 1; cIndex < 8; cIndex++)
+			szFileVersion[cIndex] = GetByte();
+
+		break;
+	}
+
+	/*
+	 *
+	 * Compare the VME file version against the supported version.
+	 *
+	 */
+
+	for (cVersionIndex = 0; g_szSupportedVersions[cVersionIndex] != 0;
+		cVersionIndex++) {
+		for (cIndex = 0; cIndex < 8; cIndex++) {
+			if (szFileVersion[cIndex] !=
+				g_szSupportedVersions[cVersionIndex][cIndex]) {
+				cRetCode = VME_VERSION_FAILURE;
+				break;
+			}
+			cRetCode = 0;
+		}
+
+		if (cRetCode == 0) {
+			break;
+		}
+	}
+
+	if (cRetCode < 0) {
+		return VME_VERSION_FAILURE;
+	}
+
+	printf("VME file checked: starting downloading to FPGA\n");
+
+	ispVMStart();
+
+	cRetCode = ispVMCode();
+
+	ispVMEnd();
+	ispVMFreeMem();
+	puts("\n");
+
+	if (cRetCode == 0 && expectedCRC != 0 &&
+			(expectedCRC != g_usCalculatedCRC)) {
+		printf("Expected CRC:   0x%.4X\n", expectedCRC);
+		printf("Calculated CRC: 0x%.4X\n", g_usCalculatedCRC);
+		return VME_CRC_FAILURE;
+	}
+	return cRetCode;
+}
+
+static int lattice_validate(Lattice_desc *desc, const char *fn)
+{
+	int ret_val = FALSE;
+
+	if (desc) {
+		if ((desc->family > min_lattice_type) &&
+			(desc->family < max_lattice_type)) {
+			if ((desc->iface > min_lattice_iface_type) &&
+				(desc->iface < max_lattice_iface_type)) {
+				if (desc->size) {
+					ret_val = TRUE;
+				} else {
+					printf("%s: NULL part size\n", fn);
+				}
+			} else {
+				printf("%s: Invalid Interface type, %d\n",
+					fn, desc->iface);
+			}
+		} else {
+			printf("%s: Invalid family type, %d\n",
+				fn, desc->family);
+		}
+	} else {
+		printf("%s: NULL descriptor!\n", fn);
+	}
+
+	return ret_val;
+}
+
+int lattice_load(Lattice_desc *desc, void *buf, size_t bsize)
+{
+	int ret_val = FPGA_FAIL;
+
+	if (!lattice_validate(desc, (char *)__func__)) {
+		printf("%s: Invalid device descriptor\n", __func__);
+	} else {
+		pfns = desc->iface_fns;
+
+		switch (desc->family) {
+		case Lattice_XP2:
+			fpga_image = buf;
+			read_bytes = 0;
+			bufsize = bsize;
+			debug("%s: Launching the Lattice ISPVME Loader:"
+				" addr 0x%x size 0x%x...\n",
+				__func__, fpga_image, bufsize);
+			ret_val = ispVM();
+			if (ret_val)
+				printf("%s: error %d downloading FPGA image\n",
+					__func__, ret_val);
+			else
+				puts("FPGA downloaded successfully\n");
+			break;
+		default:
+			printf("%s: Unsupported family type, %d\n",
+					__func__, desc->family);
+		}
+	}
+
+	return ret_val;
+}
+
+int lattice_dump(Lattice_desc *desc, void *buf, size_t bsize)
+{
+	puts("Dump not supported for Lattice FPGA\n");
+
+	return FPGA_FAIL;
+
+}
+
+int lattice_info(Lattice_desc *desc)
+{
+	int ret_val = FPGA_FAIL;
+
+	if (lattice_validate(desc, (char *)__func__)) {
+		printf("Family:        \t");
+		switch (desc->family) {
+		case Lattice_XP2:
+			puts("XP2\n");
+			break;
+			/* Add new family types here */
+		default:
+			printf("Unknown family type, %d\n", desc->family);
+		}
+
+		puts("Interface type:\t");
+		switch (desc->iface) {
+		case lattice_jtag_mode:
+			puts("JTAG Mode\n");
+			break;
+			/* Add new interface types here */
+		default:
+			printf("Unsupported interface type, %d\n", desc->iface);
+		}
+
+		printf("Device Size:   \t%d bytes\n",
+				desc->size);
+
+		if (desc->iface_fns) {
+			printf("Device Function Table @ 0x%p\n",
+				desc->iface_fns);
+			switch (desc->family) {
+			case Lattice_XP2:
+				break;
+				/* Add new family types here */
+			default:
+				break;
+			}
+		} else {
+			puts("No Device Function Table.\n");
+		}
+
+		if (desc->desc)
+			printf("Model:         \t%s\n", desc->desc);
+
+		ret_val = FPGA_SUCCESS;
+	} else {
+		printf("%s: Invalid device descriptor\n", __func__);
+	}
+
+	return ret_val;
+}
+
+
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 6603d74294b..2ead6344868 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -32,6 +32,7 @@ COBJS-$(CONFIG_GENERIC_MMC) += mmc.o
 COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
 COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o
 COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o
+COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
 COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
 COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o
 
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 80cd9bff9bb..c543d837dc7 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -627,6 +627,7 @@ int mmc_startup(struct mmc *mmc)
 	uint mult, freq;
 	u64 cmult, csize;
 	struct mmc_cmd cmd;
+	char ext_csd[512];
 
 	/* Put the Card in Identify Mode */
 	cmd.cmdidx = MMC_CMD_ALL_SEND_CID;
@@ -742,6 +743,16 @@ int mmc_startup(struct mmc *mmc)
 	if (err)
 		return err;
 
+	if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) {
+		/* check  ext_csd version and capacity */
+		err = mmc_send_ext_csd(mmc, ext_csd);
+		if (!err & (ext_csd[192] >= 2)) {
+			mmc->capacity = ext_csd[212] << 0 | ext_csd[213] << 8 |
+					ext_csd[214] << 16 | ext_csd[215] << 24;
+			mmc->capacity *= 512;
+		}
+	}
+
 	if (IS_SD(mmc))
 		err = sd_change_freq(mmc);
 	else
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
new file mode 100644
index 00000000000..9271470e368
--- /dev/null
+++ b/drivers/mmc/omap_hsmmc.c
@@ -0,0 +1,415 @@
+/*
+ * (C) Copyright 2008
+ * Texas Instruments, <www.ti.com>
+ * Sukumar Ghorai <s-ghorai@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <mmc.h>
+#include <part.h>
+#include <i2c.h>
+#include <twl4030.h>
+#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
+
+static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size);
+static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int siz);
+static struct mmc hsmmc_dev[2];
+unsigned char mmc_board_init(hsmmc_t *mmc_base)
+{
+#if defined(CONFIG_TWL4030_POWER)
+	twl4030_power_mmc_init();
+#endif
+
+#if defined(CONFIG_OMAP34XX)
+	t2_t *t2_base = (t2_t *)T2_BASE;
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+
+	writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 |
+		PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
+		&t2_base->pbias_lite);
+
+	writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL,
+		&t2_base->devconf0);
+
+	writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL,
+		&t2_base->devconf1);
+
+	writel(readl(&prcm_base->fclken1_core) |
+		EN_MMC1 | EN_MMC2 | EN_MMC3,
+		&prcm_base->fclken1_core);
+
+	writel(readl(&prcm_base->iclken1_core) |
+		EN_MMC1 | EN_MMC2 | EN_MMC3,
+		&prcm_base->iclken1_core);
+#endif
+
+/* TODO add appropriate OMAP4 init - none currently necessary */
+
+	return 0;
+}
+
+void mmc_init_stream(hsmmc_t *mmc_base)
+{
+
+	writel(readl(&mmc_base->con) | INIT_INITSTREAM, &mmc_base->con);
+
+	writel(MMC_CMD0, &mmc_base->cmd);
+	while (!(readl(&mmc_base->stat) & CC_MASK))
+		;
+	writel(CC_MASK, &mmc_base->stat)
+		;
+	writel(MMC_CMD0, &mmc_base->cmd)
+		;
+	while (!(readl(&mmc_base->stat) & CC_MASK))
+		;
+	writel(readl(&mmc_base->con) & ~INIT_INITSTREAM, &mmc_base->con);
+}
+
+
+static int mmc_init_setup(struct mmc *mmc)
+{
+	hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv;
+	unsigned int reg_val;
+	unsigned int dsor;
+
+	mmc_board_init(mmc_base);
+
+	writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET,
+		&mmc_base->sysconfig);
+	while ((readl(&mmc_base->sysstatus) & RESETDONE) == 0)
+		;
+	writel(readl(&mmc_base->sysctl) | SOFTRESETALL, &mmc_base->sysctl);
+	while ((readl(&mmc_base->sysctl) & SOFTRESETALL) != 0x0)
+		;
+	writel(DTW_1_BITMODE | SDBP_PWROFF | SDVS_3V0, &mmc_base->hctl);
+	writel(readl(&mmc_base->capa) | VS30_3V0SUP | VS18_1V8SUP,
+		&mmc_base->capa);
+
+	reg_val = readl(&mmc_base->con) & RESERVED_MASK;
+
+	writel(CTPL_MMC_SD | reg_val | WPP_ACTIVEHIGH | CDP_ACTIVEHIGH |
+		MIT_CTO | DW8_1_4BITMODE | MODE_FUNC | STR_BLOCK |
+		HR_NOHOSTRESP | INIT_NOINIT | NOOPENDRAIN, &mmc_base->con);
+
+	dsor = 240;
+	mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK | CEN_MASK),
+		(ICE_STOP | DTO_15THDTO | CEN_DISABLE));
+	mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK,
+		(dsor << CLKD_OFFSET) | ICE_OSCILLATE);
+	while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY)
+		;
+	writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
+
+	writel(readl(&mmc_base->hctl) | SDBP_PWRON, &mmc_base->hctl);
+
+	writel(IE_BADA | IE_CERR | IE_DEB | IE_DCRC | IE_DTO | IE_CIE |
+		IE_CEB | IE_CCRC | IE_CTO | IE_BRR | IE_BWR | IE_TC | IE_CC,
+		&mmc_base->ie);
+
+	mmc_init_stream(mmc_base);
+
+	return 0;
+}
+
+
+static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data)
+{
+	hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv;
+	unsigned int flags, mmc_stat;
+	unsigned int retry = 0x100000;
+
+
+	while ((readl(&mmc_base->pstate) & DATI_MASK) == DATI_CMDDIS)
+		;
+	writel(0xFFFFFFFF, &mmc_base->stat);
+	while (readl(&mmc_base->stat))
+		;
+	/*
+	 * CMDREG
+	 * CMDIDX[13:8]	: Command index
+	 * DATAPRNT[5]	: Data Present Select
+	 * ENCMDIDX[4]	: Command Index Check Enable
+	 * ENCMDCRC[3]	: Command CRC Check Enable
+	 * RSPTYP[1:0]
+	 *	00 = No Response
+	 *	01 = Length 136
+	 *	10 = Length 48
+	 *	11 = Length 48 Check busy after response
+	 */
+	/* Delay added before checking the status of frq change
+	 * retry not supported by mmc.c(core file)
+	 */
+	if (cmd->cmdidx == SD_CMD_APP_SEND_SCR)
+		udelay(50000); /* wait 50 ms */
+
+	if (!(cmd->resp_type & MMC_RSP_PRESENT))
+		flags = 0;
+	else if (cmd->resp_type & MMC_RSP_136)
+		flags = RSP_TYPE_LGHT136 | CICE_NOCHECK;
+	else if (cmd->resp_type & MMC_RSP_BUSY)
+		flags = RSP_TYPE_LGHT48B;
+	else
+		flags = RSP_TYPE_LGHT48;
+
+	/* enable default flags */
+	flags =	flags | (CMD_TYPE_NORMAL | CICE_NOCHECK | CCCE_NOCHECK |
+			MSBS_SGLEBLK | ACEN_DISABLE | BCE_DISABLE | DE_DISABLE);
+
+	if (cmd->resp_type & MMC_RSP_CRC)
+		flags |= CCCE_CHECK;
+	if (cmd->resp_type & MMC_RSP_OPCODE)
+		flags |= CICE_CHECK;
+
+	if (data) {
+		if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK) ||
+			 (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)) {
+			flags |= (MSBS_MULTIBLK | BCE_ENABLE);
+			data->blocksize = 512;
+			writel(data->blocksize | (data->blocks << 16),
+							&mmc_base->blk);
+		} else
+			writel(data->blocksize | NBLK_STPCNT, &mmc_base->blk);
+
+		if (data->flags & MMC_DATA_READ)
+			flags |= (DP_DATA | DDIR_READ);
+		else
+			flags |= (DP_DATA | DDIR_WRITE);
+	}
+
+	writel(cmd->cmdarg, &mmc_base->arg);
+	writel((cmd->cmdidx << 24) | flags, &mmc_base->cmd);
+
+	do {
+		mmc_stat = readl(&mmc_base->stat);
+		retry--;
+	} while ((mmc_stat == 0) && (retry > 0));
+
+	if (retry == 0) {
+		printf("%s : timeout: No status update\n", __func__);
+		return TIMEOUT;
+	}
+
+	if ((mmc_stat & IE_CTO) != 0)
+		return TIMEOUT;
+	else if ((mmc_stat & ERRI_MASK) != 0)
+		return -1;
+
+	if (mmc_stat & CC_MASK) {
+		writel(CC_MASK, &mmc_base->stat);
+		if (cmd->resp_type & MMC_RSP_PRESENT) {
+			if (cmd->resp_type & MMC_RSP_136) {
+				/* response type 2 */
+				cmd->response[3] = readl(&mmc_base->rsp10);
+				cmd->response[2] = readl(&mmc_base->rsp32);
+				cmd->response[1] = readl(&mmc_base->rsp54);
+				cmd->response[0] = readl(&mmc_base->rsp76);
+			} else
+				/* response types 1, 1b, 3, 4, 5, 6 */
+				cmd->response[0] = readl(&mmc_base->rsp10);
+		}
+	}
+
+	if (data && (data->flags & MMC_DATA_READ)) {
+		mmc_read_data(mmc_base,	data->dest,
+				data->blocksize * data->blocks);
+	} else if (data && (data->flags & MMC_DATA_WRITE)) {
+		mmc_write_data(mmc_base, data->src,
+				data->blocksize * data->blocks);
+	}
+	return 0;
+}
+
+static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size)
+{
+	unsigned int *output_buf = (unsigned int *)buf;
+	unsigned int mmc_stat;
+	unsigned int count;
+
+	/*
+	 * Start Polled Read
+	 */
+	count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size;
+	count /= 4;
+
+	while (size) {
+		do {
+			mmc_stat = readl(&mmc_base->stat);
+		} while (mmc_stat == 0);
+
+		if ((mmc_stat & ERRI_MASK) != 0)
+			return 1;
+
+		if (mmc_stat & BRR_MASK) {
+			unsigned int k;
+
+			writel(readl(&mmc_base->stat) | BRR_MASK,
+				&mmc_base->stat);
+			for (k = 0; k < count; k++) {
+				*output_buf = readl(&mmc_base->data);
+				output_buf++;
+			}
+			size -= (count*4);
+		}
+
+		if (mmc_stat & BWR_MASK)
+			writel(readl(&mmc_base->stat) | BWR_MASK,
+				&mmc_base->stat);
+
+		if (mmc_stat & TC_MASK) {
+			writel(readl(&mmc_base->stat) | TC_MASK,
+				&mmc_base->stat);
+			break;
+		}
+	}
+	return 0;
+}
+
+static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int size)
+{
+	unsigned int *input_buf = (unsigned int *)buf;
+	unsigned int mmc_stat;
+	unsigned int count;
+
+	/*
+	 * Start Polled Read
+	 */
+	count = (size > MMCSD_SECTOR_SIZE) ? MMCSD_SECTOR_SIZE : size;
+	count /= 4;
+
+	while (size) {
+		do {
+			mmc_stat = readl(&mmc_base->stat);
+		} while (mmc_stat == 0);
+
+		if ((mmc_stat & ERRI_MASK) != 0)
+			return 1;
+
+		if (mmc_stat & BWR_MASK) {
+			unsigned int k;
+
+			writel(readl(&mmc_base->stat) | BWR_MASK,
+					&mmc_base->stat);
+			for (k = 0; k < count; k++) {
+				writel(*input_buf, &mmc_base->data);
+				input_buf++;
+			}
+			size -= (count*4);
+		}
+
+		if (mmc_stat & BRR_MASK)
+			writel(readl(&mmc_base->stat) | BRR_MASK,
+				&mmc_base->stat);
+
+		if (mmc_stat & TC_MASK) {
+			writel(readl(&mmc_base->stat) | TC_MASK,
+				&mmc_base->stat);
+			break;
+		}
+	}
+	return 0;
+}
+
+static void mmc_set_ios(struct mmc *mmc)
+{
+	hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv;
+	unsigned int dsor = 0;
+
+	/* configue bus width */
+	switch (mmc->bus_width) {
+	case 8:
+		writel(readl(&mmc_base->con) | DTW_8_BITMODE,
+			&mmc_base->con);
+		break;
+
+	case 4:
+		writel(readl(&mmc_base->con) & ~DTW_8_BITMODE,
+			&mmc_base->con);
+		writel(readl(&mmc_base->hctl) | DTW_4_BITMODE,
+			&mmc_base->hctl);
+		break;
+
+	case 1:
+	default:
+		writel(readl(&mmc_base->con) & ~DTW_8_BITMODE,
+			&mmc_base->con);
+		writel(readl(&mmc_base->hctl) & ~DTW_4_BITMODE,
+			&mmc_base->hctl);
+		break;
+	}
+
+	/* configure clock with 96Mhz system clock.
+	 */
+	if (mmc->clock != 0) {
+		dsor = (MMC_CLOCK_REFERENCE * 1000000 / mmc->clock);
+		if ((MMC_CLOCK_REFERENCE * 1000000) / dsor > mmc->clock)
+			dsor++;
+	}
+
+	mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK | CEN_MASK),
+				(ICE_STOP | DTO_15THDTO | CEN_DISABLE));
+
+	mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK,
+				(dsor << CLKD_OFFSET) | ICE_OSCILLATE);
+
+	while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY)
+		;
+	writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
+}
+
+int omap_mmc_init(int dev_index)
+{
+	struct mmc *mmc;
+
+	mmc = &hsmmc_dev[dev_index];
+
+	sprintf(mmc->name, "OMAP SD/MMC");
+	mmc->send_cmd = mmc_send_cmd;
+	mmc->set_ios = mmc_set_ios;
+	mmc->init = mmc_init_setup;
+
+	switch (dev_index) {
+	case 0:
+		mmc->priv = (hsmmc_t *)OMAP_HSMMC1_BASE;
+		break;
+	case 1:
+		mmc->priv = (hsmmc_t *)OMAP_HSMMC2_BASE;
+		break;
+	case 2:
+		mmc->priv = (hsmmc_t *)OMAP_HSMMC3_BASE;
+		break;
+	default:
+		mmc->priv = (hsmmc_t *)OMAP_HSMMC1_BASE;
+		return 1;
+	}
+	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+	mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+	mmc->f_min = 400000;
+	mmc->f_max = 52000000;
+
+	mmc_register(mmc);
+
+	return 0;
+}
+
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index c5a86d6c0d3..d41579c9cef 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -481,7 +481,8 @@ static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat,
 	 * Set the addr_calc_st bit(bit no 13) in the NAND Flash Control
 	 * register to 1.
 	 */
-	__raw_writel(1 << 13, &davinci_emif_regs->nandfcr);
+	__raw_writel(DAVINCI_NANDFCR_4BIT_CALC_START,
+			&davinci_emif_regs->nandfcr);
 
 	/*
 	 * Wait for the corr_state field (bits 8 to 11) in the
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 255679a1862..399520e22e6 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -36,6 +36,7 @@ COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o
 # echi
 COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o
 COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
+COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
 COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
 COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
 COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
new file mode 100644
index 00000000000..af8ee907e8e
--- /dev/null
+++ b/drivers/usb/host/ehci-mxc.c
@@ -0,0 +1,130 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <common.h>
+#include <usb.h>
+#include <asm/io.h>
+#include <asm/arch/mx31-regs.h>
+#include <usb/ehci-fsl.h>
+#include <errno.h>
+
+#include "ehci.h"
+#include "ehci-core.h"
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX31_OTG_SIC_SHIFT	29
+#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT		(1 << 24)
+
+#define MX31_H2_SIC_SHIFT	21
+#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT		(1 << 16)
+#define MX31_H2_DT_BIT		(1 << 5)
+
+#define MX31_H1_SIC_SHIFT	13
+#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT		(1 << 8)
+#define MX31_H1_DT_BIT		(1 << 4)
+
+static int mxc_set_usbcontrol(int port, unsigned int flags)
+{
+	unsigned int v;
+#ifdef CONFIG_MX31
+		v = readl(MX31_OTG_BASE_ADDR + USBCTRL_OTGBASE_OFFSET);
+
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX31_OTG_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_OTG_PM_BIT;
+
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT |
+				MX31_H1_DT_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H1_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H1_DT_BIT;
+
+			break;
+		case 2:	/* H2 port */
+			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT |
+				MX31_H2_DT_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H2_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_H2_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H2_DT_BIT;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		writel(v, MX31_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET);
+#endif
+		return 0;
+}
+
+int ehci_hcd_init(void)
+{
+	u32 tmp;
+	struct usb_ehci *ehci;
+	struct clock_control_regs *sc_regs =
+		(struct clock_control_regs *)CCM_BASE;
+
+	tmp = __raw_readl(&sc_regs->ccmr);
+	__raw_writel(__raw_readl(&sc_regs->ccmr) | (1 << 9), &sc_regs->ccmr) ;
+
+	udelay(80);
+
+	/* Take USB2 */
+	ehci = (struct usb_ehci *)(MX31_OTG_BASE_ADDR +
+		(0x200 * CONFIG_MXC_USB_PORT));
+	hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+	hcor = (struct ehci_hcor *)((uint32_t) hccr +
+			HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+	setbits_le32(&ehci->usbmode, CM_HOST);
+	setbits_le32(&ehci->control, USB_EN);
+
+	__raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+
+	mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
+
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(void)
+{
+	return 0;
+}
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 7f04b4944f2..51831f0e678 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -334,37 +334,6 @@ enum ipu_panel {
 
 #define IOMUX_MODE_L(pin, mode) IOMUX_MODE(((pin) + 0xc) ^ 3, mode)
 
-enum lcd_pin {
-	MX31_PIN_D3_SPL		= IOMUX_PIN(0xff,  19),
-	MX31_PIN_D3_CLS		= IOMUX_PIN(0xff,  20),
-	MX31_PIN_D3_REV		= IOMUX_PIN(0xff,  21),
-	MX31_PIN_CONTRAST	= IOMUX_PIN(0xff,  22),
-	MX31_PIN_VSYNC3		= IOMUX_PIN(0xff,  23),
-
-	MX31_PIN_DRDY0		= IOMUX_PIN(0xff,  33),
-	MX31_PIN_FPSHIFT	= IOMUX_PIN(0xff,  34),
-	MX31_PIN_HSYNC		= IOMUX_PIN(0xff,  35),
-
-	MX31_PIN_LD17		= IOMUX_PIN(0xff,  37),
-	MX31_PIN_LD16		= IOMUX_PIN(0xff,  38),
-	MX31_PIN_LD15		= IOMUX_PIN(0xff,  39),
-	MX31_PIN_LD14		= IOMUX_PIN(0xff,  40),
-	MX31_PIN_LD13		= IOMUX_PIN(0xff,  41),
-	MX31_PIN_LD12		= IOMUX_PIN(0xff,  42),
-	MX31_PIN_LD11		= IOMUX_PIN(0xff,  43),
-	MX31_PIN_LD10		= IOMUX_PIN(0xff,  44),
-	MX31_PIN_LD9		= IOMUX_PIN(0xff,  45),
-	MX31_PIN_LD8		= IOMUX_PIN(0xff,  46),
-	MX31_PIN_LD7		= IOMUX_PIN(0xff,  47),
-	MX31_PIN_LD6		= IOMUX_PIN(0xff,  48),
-	MX31_PIN_LD5		= IOMUX_PIN(0xff,  49),
-	MX31_PIN_LD4		= IOMUX_PIN(0xff,  50),
-	MX31_PIN_LD3		= IOMUX_PIN(0xff,  51),
-	MX31_PIN_LD2		= IOMUX_PIN(0xff,  52),
-	MX31_PIN_LD1		= IOMUX_PIN(0xff,  53),
-	MX31_PIN_LD0		= IOMUX_PIN(0xff,  54),
-};
-
 struct chan_param_mem_planar {
 	/* Word 0 */
 	u32	xv:10;