Merge tag 'video-20230204' of https://source.denx.de/u-boot/custodians/u-boot-video

 - restore TI AM335x LCDC driver with DM support
 - make simple panel independent of backlight
 - add ofnode panel timing decode functions with test
 - add TIDSS video driver and AM62x splash screen
 - add TI logo

16 files changed, 2129 insertions, 2 deletions

diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c
index 4d56b1a7675..d08578e9c4f 100644
--- a/drivers/core/ofnode.c
+++ b/drivers/core/ofnode.c
@@ -991,6 +991,53 @@ int ofnode_decode_display_timing(ofnode parent, int index,
 	return ret;
 }
 
+int ofnode_decode_panel_timing(ofnode parent,
+			       struct display_timing *dt)
+{
+	ofnode timings;
+	u32 val = 0;
+	int ret = 0;
+
+	timings = ofnode_find_subnode(parent, "panel-timings");
+	if (!ofnode_valid(timings))
+		return -EINVAL;
+	memset(dt, 0, sizeof(*dt));
+	ret |= decode_timing_property(timings, "hback-porch", &dt->hback_porch);
+	ret |= decode_timing_property(timings, "hfront-porch", &dt->hfront_porch);
+	ret |= decode_timing_property(timings, "hactive", &dt->hactive);
+	ret |= decode_timing_property(timings, "hsync-len", &dt->hsync_len);
+	ret |= decode_timing_property(timings, "vback-porch", &dt->vback_porch);
+	ret |= decode_timing_property(timings, "vfront-porch", &dt->vfront_porch);
+	ret |= decode_timing_property(timings, "vactive", &dt->vactive);
+	ret |= decode_timing_property(timings, "vsync-len", &dt->vsync_len);
+	ret |= decode_timing_property(timings, "clock-frequency", &dt->pixelclock);
+	dt->flags = 0;
+	if (!ofnode_read_u32(timings, "vsync-active", &val)) {
+		dt->flags |= val ? DISPLAY_FLAGS_VSYNC_HIGH :
+		    DISPLAY_FLAGS_VSYNC_LOW;
+	}
+	if (!ofnode_read_u32(timings, "hsync-active", &val)) {
+		dt->flags |= val ? DISPLAY_FLAGS_HSYNC_HIGH :
+		    DISPLAY_FLAGS_HSYNC_LOW;
+	}
+	if (!ofnode_read_u32(timings, "de-active", &val)) {
+		dt->flags |= val ? DISPLAY_FLAGS_DE_HIGH :
+		    DISPLAY_FLAGS_DE_LOW;
+	}
+	if (!ofnode_read_u32(timings, "pixelclk-active", &val)) {
+		dt->flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE :
+		DISPLAY_FLAGS_PIXDATA_NEGEDGE;
+	}
+	if (ofnode_read_bool(timings, "interlaced"))
+		dt->flags |= DISPLAY_FLAGS_INTERLACED;
+	if (ofnode_read_bool(timings, "doublescan"))
+		dt->flags |= DISPLAY_FLAGS_DOUBLESCAN;
+	if (ofnode_read_bool(timings, "doubleclk"))
+		dt->flags |= DISPLAY_FLAGS_DOUBLECLK;
+
+	return ret;
+}
+
 const void *ofnode_get_property(ofnode node, const char *propname, int *lenp)
 {
 	if (ofnode_is_np(node))
diff --git a/drivers/core/read.c b/drivers/core/read.c
index 3e5fea87d84..e0543bbad59 100644
--- a/drivers/core/read.c
+++ b/drivers/core/read.c
@@ -420,6 +420,12 @@ int dev_decode_display_timing(const struct udevice *dev, int index,
 	return ofnode_decode_display_timing(dev_ofnode(dev), index, config);
 }
 
+int dev_decode_panel_timing(const struct udevice *dev,
+			    struct display_timing *config)
+{
+	return ofnode_decode_panel_timing(dev_ofnode(dev), config);
+}
+
 ofnode dev_get_phy_node(const struct udevice *dev)
 {
 	return ofnode_get_phy_node(dev_ofnode(dev));
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 440b161b842..2a76d19cc8e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -576,6 +576,8 @@ config ATMEL_HLCD
 	help
 	   HLCDC supports video output to an attached LCD panel.
 
+source "drivers/video/ti/Kconfig"
+
 source "drivers/video/exynos/Kconfig"
 
 config LOGICORE_DP_TX
@@ -634,6 +636,8 @@ config VIDEO_SANDBOX_SDL
 
 source "drivers/video/stm32/Kconfig"
 
+source "drivers/video/tidss/Kconfig"
+
 config VIDEO_TEGRA20
 	bool "Enable LCD support on Tegra20"
 	depends on OF_CONTROL
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 40a871d638e..75c789a9570 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -26,6 +26,8 @@ obj-${CONFIG_EXYNOS_FB} += exynos/
 obj-${CONFIG_VIDEO_ROCKCHIP} += rockchip/
 obj-${CONFIG_VIDEO_STM32} += stm32/
 obj-${CONFIG_VIDEO_TEGRA124} += tegra124/
+obj-${CONFIG_VIDEO_TIDSS} += tidss/
+obj-y += ti/
 
 obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
 obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
diff --git a/drivers/video/simple_panel.c b/drivers/video/simple_panel.c
index c8f7022ea63..91c91ee75d8 100644
--- a/drivers/video/simple_panel.c
+++ b/drivers/video/simple_panel.c
@@ -63,12 +63,15 @@ static int simple_panel_of_to_plat(struct udevice *dev)
 				return ret;
 		}
 	}
+
 	ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
-					   "backlight", &priv->backlight);
+						   "backlight", &priv->backlight);
 	if (ret) {
 		debug("%s: Cannot get backlight: ret=%d\n", __func__, ret);
-		return log_ret(ret);
+		if (ret != -ENOENT)
+			return log_ret(ret);
 	}
+
 	ret = gpio_request_by_name(dev, "enable-gpios", 0, &priv->enable,
 				   GPIOD_IS_OUT);
 	if (ret) {
diff --git a/drivers/video/ti/Kconfig b/drivers/video/ti/Kconfig
new file mode 100644
index 00000000000..3081e9e8c09
--- /dev/null
+++ b/drivers/video/ti/Kconfig
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+#
+config AM335X_LCD
+	bool "Enable AM335x video support"
+	help
+	   Supports video output to an attached LCD panel.
diff --git a/drivers/video/ti/Makefile b/drivers/video/ti/Makefile
new file mode 100644
index 00000000000..1f551c84f34
--- /dev/null
+++ b/drivers/video/ti/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+#
+
+obj-$(CONFIG_AM335X_LCD) += tilcdc.o tilcdc-panel.o
diff --git a/drivers/video/ti/tilcdc-panel.c b/drivers/video/ti/tilcdc-panel.c
new file mode 100644
index 00000000000..df95086a515
--- /dev/null
+++ b/drivers/video/ti/tilcdc-panel.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * OMAP panel support
+ *
+ * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+ */
+
+#include <common.h>
+#include <backlight.h>
+#include <clk.h>
+#include <display.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <log.h>
+#include <panel.h>
+#include <asm/gpio.h>
+#include <linux/err.h>
+#include "tilcdc.h"
+
+struct tilcdc_panel_priv {
+	struct tilcdc_panel_info info;
+	struct display_timing timing;
+	struct udevice *backlight;
+	struct gpio_desc enable;
+};
+
+static int tilcdc_panel_enable_backlight(struct udevice *dev)
+{
+	struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+
+	if (dm_gpio_is_valid(&priv->enable))
+		dm_gpio_set_value(&priv->enable, 1);
+
+	if (priv->backlight)
+		return backlight_enable(priv->backlight);
+
+	return 0;
+}
+
+static int tilcdc_panel_set_backlight(struct udevice *dev, int percent)
+{
+	struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+
+	if (dm_gpio_is_valid(&priv->enable))
+		dm_gpio_set_value(&priv->enable, 1);
+
+	if (priv->backlight)
+		return backlight_set_brightness(priv->backlight, percent);
+
+	return 0;
+}
+
+int tilcdc_panel_get_display_info(struct udevice *dev,
+				  struct tilcdc_panel_info *info)
+{
+	struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+
+	memcpy(info, &priv->info, sizeof(*info));
+	return 0;
+}
+
+static int tilcdc_panel_get_display_timing(struct udevice *dev,
+					   struct display_timing *timing)
+{
+	struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+
+	memcpy(timing, &priv->timing, sizeof(*timing));
+	return 0;
+}
+
+static int tilcdc_panel_remove(struct udevice *dev)
+{
+	struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+
+	if (dm_gpio_is_valid(&priv->enable))
+		dm_gpio_free(dev, &priv->enable);
+
+	return 0;
+}
+
+static int tilcdc_panel_probe(struct udevice *dev)
+{
+	struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+	int err;
+
+	err = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
+					   "backlight", &priv->backlight);
+	if (err)
+		dev_warn(dev, "failed to get backlight\n");
+
+	err = gpio_request_by_name(dev, "enable-gpios", 0, &priv->enable,
+				   GPIOD_IS_OUT);
+	if (err) {
+		dev_warn(dev, "failed to get enable GPIO\n");
+		if (err != -ENOENT)
+			return err;
+	}
+
+	return 0;
+}
+
+static int tilcdc_panel_of_to_plat(struct udevice *dev)
+{
+	struct tilcdc_panel_priv *priv = dev_get_priv(dev);
+	ofnode node;
+	int err;
+
+	err = ofnode_decode_display_timing(dev_ofnode(dev), 0, &priv->timing);
+	if (err) {
+		dev_err(dev, "failed to get display timing\n");
+		return err;
+	}
+
+	node = dev_read_subnode(dev, "panel-info");
+	if (!ofnode_valid(node)) {
+		dev_err(dev, "missing 'panel-info' node\n");
+		return -ENXIO;
+	}
+
+	err |= ofnode_read_u32(node, "ac-bias", &priv->info.ac_bias);
+	err |= ofnode_read_u32(node, "ac-bias-intrpt",
+			       &priv->info.ac_bias_intrpt);
+	err |= ofnode_read_u32(node, "dma-burst-sz", &priv->info.dma_burst_sz);
+	err |= ofnode_read_u32(node, "bpp", &priv->info.bpp);
+	err |= ofnode_read_u32(node, "fdd", &priv->info.fdd);
+	err |= ofnode_read_u32(node, "sync-edge", &priv->info.sync_edge);
+	err |= ofnode_read_u32(node, "sync-ctrl", &priv->info.sync_ctrl);
+	err |= ofnode_read_u32(node, "raster-order", &priv->info.raster_order);
+	err |= ofnode_read_u32(node, "fifo-th", &priv->info.fifo_th);
+	if (err) {
+		dev_err(dev, "failed to get panel info\n");
+		return err;
+	}
+
+	/* optional */
+	priv->info.tft_alt_mode = ofnode_read_bool(node, "tft-alt-mode");
+	priv->info.invert_pxl_clk = ofnode_read_bool(node, "invert-pxl-clk");
+
+	dev_dbg(dev, "LCD: %dx%d, bpp=%d, clk=%d Hz\n",
+		priv->timing.hactive.typ, priv->timing.vactive.typ,
+		priv->info.bpp, priv->timing.pixelclock.typ);
+	dev_dbg(dev, "     hbp=%d, hfp=%d, hsw=%d\n",
+		priv->timing.hback_porch.typ, priv->timing.hfront_porch.typ,
+		priv->timing.hsync_len.typ);
+	dev_dbg(dev, "     vbp=%d, vfp=%d, vsw=%d\n",
+		priv->timing.vback_porch.typ, priv->timing.vfront_porch.typ,
+		priv->timing.vsync_len.typ);
+
+	return 0;
+}
+
+static const struct panel_ops tilcdc_panel_ops = {
+	.enable_backlight = tilcdc_panel_enable_backlight,
+	.set_backlight = tilcdc_panel_set_backlight,
+	.get_display_timing = tilcdc_panel_get_display_timing,
+};
+
+static const struct udevice_id tilcdc_panel_ids[] = {
+	{.compatible = "ti,tilcdc,panel"},
+	{}
+};
+
+U_BOOT_DRIVER(tilcdc_panel) = {
+	.name = "tilcdc_panel",
+	.id = UCLASS_PANEL,
+	.of_match = tilcdc_panel_ids,
+	.ops = &tilcdc_panel_ops,
+	.of_to_plat = tilcdc_panel_of_to_plat,
+	.probe = tilcdc_panel_probe,
+	.remove = tilcdc_panel_remove,
+	.priv_auto = sizeof(struct tilcdc_panel_priv),
+};
diff --git a/drivers/video/ti/tilcdc-panel.h b/drivers/video/ti/tilcdc-panel.h
new file mode 100644
index 00000000000..6bcfbf8a8b4
--- /dev/null
+++ b/drivers/video/ti/tilcdc-panel.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+ */
+
+#ifndef _TILCDC_PANEL_H
+#define _TILCDC_PANEL_H
+
+#include "tilcdc.h"
+
+int tilcdc_panel_get_display_info(struct udevice *dev,
+				  struct tilcdc_panel_info *info);
+
+#endif /* _TILCDC_PANEL_H */
diff --git a/drivers/video/ti/tilcdc.c b/drivers/video/ti/tilcdc.c
new file mode 100644
index 00000000000..88043fc18c5
--- /dev/null
+++ b/drivers/video/ti/tilcdc.c
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <log.h>
+#include <panel.h>
+#include <video.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/utils.h>
+#include "tilcdc.h"
+#include "tilcdc-panel.h"
+
+#define LCDC_FMAX				200000000
+
+/* LCD Control Register */
+#define LCDC_CTRL_CLK_DIVISOR_MASK		GENMASK(15, 8)
+#define LCDC_CTRL_RASTER_MODE			BIT(0)
+#define LCDC_CTRL_CLK_DIVISOR(x)		(((x) & GENMASK(7, 0)) << 8)
+/* LCD Clock Enable Register */
+#define LCDC_CLKC_ENABLE_CORECLKEN		BIT(0)
+#define LCDC_CLKC_ENABLE_LIDDCLKEN		BIT(1)
+#define LCDC_CLKC_ENABLE_DMACLKEN		BIT(2)
+/* LCD DMA Control Register */
+#define LCDC_DMA_CTRL_BURST_SIZE(x)		(((x) & GENMASK(2, 0)) << 4)
+#define LCDC_DMA_CTRL_BURST_1			0x0
+#define LCDC_DMA_CTRL_BURST_2			0x1
+#define LCDC_DMA_CTRL_BURST_4			0x2
+#define LCDC_DMA_CTRL_BURST_8			0x3
+#define LCDC_DMA_CTRL_BURST_16			0x4
+#define LCDC_DMA_CTRL_FIFO_TH(x)		(((x) & GENMASK(2, 0)) << 8)
+/* LCD Timing_0 Register */
+#define LCDC_RASTER_TIMING_0_HORMSB(x)	((((x) - 1) & BIT(10)) >> 7)
+#define LCDC_RASTER_TIMING_0_HORLSB(x) (((((x) >> 4) - 1) & GENMASK(5, 0)) << 4)
+#define LCDC_RASTER_TIMING_0_HSWLSB(x)	((((x) - 1) & GENMASK(5, 0)) << 10)
+#define LCDC_RASTER_TIMING_0_HFPLSB(x)	((((x) - 1) & GENMASK(7, 0)) << 16)
+#define LCDC_RASTER_TIMING_0_HBPLSB(x)	((((x) - 1) & GENMASK(7, 0)) << 24)
+/* LCD Timing_1 Register */
+#define LCDC_RASTER_TIMING_1_VERLSB(x)		(((x) - 1) & GENMASK(9, 0))
+#define LCDC_RASTER_TIMING_1_VSW(x)	((((x) - 1) & GENMASK(5, 0)) << 10)
+#define LCDC_RASTER_TIMING_1_VFP(x)		(((x) & GENMASK(7, 0)) << 16)
+#define LCDC_RASTER_TIMING_1_VBP(x)		(((x) & GENMASK(7, 0)) << 24)
+/* LCD Timing_2 Register */
+#define LCDC_RASTER_TIMING_2_HFPMSB(x)	((((x) - 1) & GENMASK(9, 8)) >> 8)
+#define LCDC_RASTER_TIMING_2_HBPMSB(x)	((((x) - 1) & GENMASK(9, 8)) >> 4)
+#define LCDC_RASTER_TIMING_2_ACB(x)		(((x) & GENMASK(7, 0)) << 8)
+#define LCDC_RASTER_TIMING_2_ACBI(x)		(((x) & GENMASK(3, 0)) << 16)
+#define LCDC_RASTER_TIMING_2_VSYNC_INVERT	BIT(20)
+#define LCDC_RASTER_TIMING_2_HSYNC_INVERT	BIT(21)
+#define LCDC_RASTER_TIMING_2_PXCLK_INVERT	BIT(22)
+#define LCDC_RASTER_TIMING_2_DE_INVERT		BIT(23)
+#define LCDC_RASTER_TIMING_2_HSVS_RISEFALL	BIT(24)
+#define LCDC_RASTER_TIMING_2_HSVS_CONTROL	BIT(25)
+#define LCDC_RASTER_TIMING_2_VERMSB(x)		((((x) - 1) & BIT(10)) << 16)
+#define LCDC_RASTER_TIMING_2_HSWMSB(x)	((((x) - 1) & GENMASK(9, 6)) << 21)
+/* LCD Raster Ctrl Register */
+#define LCDC_RASTER_CTRL_ENABLE			BIT(0)
+#define LCDC_RASTER_CTRL_TFT_MODE		BIT(7)
+#define LCDC_RASTER_CTRL_DATA_ORDER		BIT(8)
+#define LCDC_RASTER_CTRL_REQDLY(x)		(((x) & GENMASK(7, 0)) << 12)
+#define LCDC_RASTER_CTRL_PALMODE_RAWDATA	(0x02 << 20)
+#define LCDC_RASTER_CTRL_TFT_ALT_ENABLE		BIT(23)
+#define LCDC_RASTER_CTRL_TFT_24BPP_MODE		BIT(25)
+#define LCDC_RASTER_CTRL_TFT_24BPP_UNPACK	BIT(26)
+
+enum {
+	LCDC_MAX_WIDTH = 2048,
+	LCDC_MAX_HEIGHT = 2048,
+	LCDC_MAX_LOG2_BPP = VIDEO_BPP32,
+};
+
+struct tilcdc_regs {
+	u32 pid;
+	u32 ctrl;
+	u32 gap0;
+	u32 lidd_ctrl;
+	u32 lidd_cs0_conf;
+	u32 lidd_cs0_addr;
+	u32 lidd_cs0_data;
+	u32 lidd_cs1_conf;
+	u32 lidd_cs1_addr;
+	u32 lidd_cs1_data;
+	u32 raster_ctrl;
+	u32 raster_timing0;
+	u32 raster_timing1;
+	u32 raster_timing2;
+	u32 raster_subpanel;
+	u32 raster_subpanel2;
+	u32 lcddma_ctrl;
+	u32 lcddma_fb0_base;
+	u32 lcddma_fb0_ceiling;
+	u32 lcddma_fb1_base;
+	u32 lcddma_fb1_ceiling;
+	u32 sysconfig;
+	u32 irqstatus_raw;
+	u32 irqstatus;
+	u32 irqenable_set;
+	u32 irqenable_clear;
+	u32 gap1;
+	u32 clkc_enable;
+	u32 clkc_reset;
+};
+
+struct tilcdc_priv {
+	struct tilcdc_regs *regs;
+	struct clk gclk;
+	struct clk dpll_m2_clk;
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static ulong tilcdc_set_pixel_clk_rate(struct udevice *dev, ulong rate)
+{
+	struct tilcdc_priv *priv = dev_get_priv(dev);
+	struct tilcdc_regs *regs = priv->regs;
+	ulong mult_rate, mult_round_rate, best_err, err;
+	u32 v;
+	int div, i;
+
+	best_err = rate;
+	div = 0;
+	for (i = 2; i <= 255; i++) {
+		mult_rate = rate * i;
+		mult_round_rate = clk_round_rate(&priv->gclk, mult_rate);
+		if (IS_ERR_VALUE(mult_round_rate))
+			return mult_round_rate;
+
+		err = mult_rate - mult_round_rate;
+		if (err < best_err) {
+			best_err = err;
+			div = i;
+			if (err == 0)
+				break;
+		}
+	}
+
+	if (div == 0) {
+		dev_err(dev, "failed to find a divisor\n");
+		return -EFAULT;
+	}
+
+	mult_rate = clk_set_rate(&priv->gclk, rate * div);
+	v = readl(&regs->ctrl) & ~LCDC_CTRL_CLK_DIVISOR_MASK;
+	v |= LCDC_CTRL_CLK_DIVISOR(div);
+	writel(v, &regs->ctrl);
+	rate = mult_rate / div;
+	dev_dbg(dev, "rate=%ld, div=%d, err=%ld\n", rate, div, err);
+	return rate;
+}
+
+static int tilcdc_remove(struct udevice *dev)
+{
+	struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+	struct tilcdc_priv *priv = dev_get_priv(dev);
+
+	uc_plat->base -= 0x20;
+	uc_plat->size += 0x20;
+	clk_release_all(&priv->gclk, 1);
+	clk_release_all(&priv->dpll_m2_clk, 1);
+	return 0;
+}
+
+static int tilcdc_probe(struct udevice *dev)
+{
+	struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct tilcdc_priv *priv = dev_get_priv(dev);
+	struct tilcdc_regs *regs = priv->regs;
+	struct udevice *panel, *clk_dev;
+	struct tilcdc_panel_info info;
+	struct display_timing timing;
+	ulong rate;
+	u32 reg;
+	int err;
+
+	/* Before relocation we don't need to do anything */
+	if (!(gd->flags & GD_FLG_RELOC))
+		return 0;
+
+	err = uclass_get_device(UCLASS_PANEL, 0, &panel);
+	if (err) {
+		dev_err(dev, "failed to get panel\n");
+		return err;
+	}
+
+	err = panel_get_display_timing(panel, &timing);
+	if (err) {
+		dev_err(dev, "failed to get display timing\n");
+		return err;
+	}
+
+	if (timing.pixelclock.typ > (LCDC_FMAX / 2)) {
+		dev_err(dev, "invalid display clock-frequency: %d Hz\n",
+			timing.pixelclock.typ);
+		return -EINVAL;
+	}
+
+	if (timing.hactive.typ > LCDC_MAX_WIDTH)
+		timing.hactive.typ = LCDC_MAX_WIDTH;
+
+	if (timing.vactive.typ > LCDC_MAX_HEIGHT)
+		timing.vactive.typ = LCDC_MAX_HEIGHT;
+
+	err = tilcdc_panel_get_display_info(panel, &info);
+	if (err) {
+		dev_err(dev, "failed to get panel info\n");
+		return err;
+	}
+
+	switch (info.bpp) {
+	case 16:
+	case 24:
+	case 32:
+		break;
+	default:
+		dev_err(dev, "invalid seting, bpp: %d\n", info.bpp);
+		return -EINVAL;
+	}
+
+	switch (info.dma_burst_sz) {
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+	case 16:
+		break;
+	default:
+		dev_err(dev, "invalid setting, dma-burst-sz: %d\n",
+			info.dma_burst_sz);
+		return -EINVAL;
+	}
+
+	err = uclass_get_device_by_name(UCLASS_CLK, "lcd_gclk@534", &clk_dev);
+	if (err) {
+		dev_err(dev, "failed to get lcd_gclk device\n");
+		return err;
+	}
+
+	err = clk_request(clk_dev, &priv->gclk);
+	if (err) {
+		dev_err(dev, "failed to get %s clock\n", clk_dev->name);
+		return err;
+	}
+
+	rate = tilcdc_set_pixel_clk_rate(dev, timing.pixelclock.typ);
+	if (IS_ERR_VALUE(rate)) {
+		dev_err(dev, "failed to set pixel clock rate\n");
+		return rate;
+	}
+
+	err = uclass_get_device_by_name(UCLASS_CLK, "dpll_disp_m2_ck@4a4",
+					&clk_dev);
+	if (err) {
+		dev_err(dev, "failed to get dpll_disp_m2 clock device\n");
+		return err;
+	}
+
+	err = clk_request(clk_dev, &priv->dpll_m2_clk);
+	if (err) {
+		dev_err(dev, "failed to get %s clock\n", clk_dev->name);
+		return err;
+	}
+
+	err = clk_set_parent(&priv->gclk, &priv->dpll_m2_clk);
+	if (err) {
+		dev_err(dev, "failed to set %s clock as %s's parent\n",
+			priv->dpll_m2_clk.dev->name, priv->gclk.dev->name);
+		return err;
+	}
+
+	/* palette default entry */
+	memset((void *)uc_plat->base, 0, 0x20);
+	*(unsigned int *)uc_plat->base = 0x4000;
+	/* point fb behind palette */
+	uc_plat->base += 0x20;
+	uc_plat->size -= 0x20;
+
+	writel(LCDC_CLKC_ENABLE_CORECLKEN | LCDC_CLKC_ENABLE_LIDDCLKEN |
+	       LCDC_CLKC_ENABLE_DMACLKEN, &regs->clkc_enable);
+	writel(0, &regs->raster_ctrl);
+
+	reg = readl(&regs->ctrl) & LCDC_CTRL_CLK_DIVISOR_MASK;
+	reg |= LCDC_CTRL_RASTER_MODE;
+	writel(reg, &regs->ctrl);
+
+	reg = (timing.hactive.typ * timing.vactive.typ * info.bpp) >> 3;
+	reg += uc_plat->base;
+	writel(uc_plat->base, &regs->lcddma_fb0_base);
+	writel(reg, &regs->lcddma_fb0_ceiling);
+	writel(uc_plat->base, &regs->lcddma_fb1_base);
+	writel(reg, &regs->lcddma_fb1_ceiling);
+
+	reg = LCDC_DMA_CTRL_FIFO_TH(info.fifo_th);
+	switch (info.dma_burst_sz) {
+	case 1:
+		reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_1);
+		break;
+	case 2:
+		reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_2);
+		break;
+	case 4:
+		reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_4);
+		break;
+	case 8:
+		reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_8);
+		break;
+	case 16:
+		reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_16);
+		break;
+	}
+
+	writel(reg, &regs->lcddma_ctrl);
+
+	writel(LCDC_RASTER_TIMING_0_HORLSB(timing.hactive.typ) |
+	       LCDC_RASTER_TIMING_0_HORMSB(timing.hactive.typ) |
+	       LCDC_RASTER_TIMING_0_HFPLSB(timing.hfront_porch.typ) |
+	       LCDC_RASTER_TIMING_0_HBPLSB(timing.hback_porch.typ) |
+	       LCDC_RASTER_TIMING_0_HSWLSB(timing.hsync_len.typ),
+	       &regs->raster_timing0);
+
+	writel(LCDC_RASTER_TIMING_1_VBP(timing.vback_porch.typ) |
+	       LCDC_RASTER_TIMING_1_VFP(timing.vfront_porch.typ) |
+	       LCDC_RASTER_TIMING_1_VSW(timing.vsync_len.typ) |
+	       LCDC_RASTER_TIMING_1_VERLSB(timing.vactive.typ),
+	       &regs->raster_timing1);
+
+	reg = LCDC_RASTER_TIMING_2_ACB(info.ac_bias) |
+		LCDC_RASTER_TIMING_2_ACBI(info.ac_bias_intrpt) |
+		LCDC_RASTER_TIMING_2_HSWMSB(timing.hsync_len.typ) |
+		LCDC_RASTER_TIMING_2_VERMSB(timing.vactive.typ) |
+		LCDC_RASTER_TIMING_2_HBPMSB(timing.hback_porch.typ) |
+		LCDC_RASTER_TIMING_2_HFPMSB(timing.hfront_porch.typ);
+
+	if (timing.flags & DISPLAY_FLAGS_VSYNC_LOW)
+		reg |= LCDC_RASTER_TIMING_2_VSYNC_INVERT;
+
+	if (timing.flags & DISPLAY_FLAGS_HSYNC_LOW)
+		reg |= LCDC_RASTER_TIMING_2_HSYNC_INVERT;
+
+	if (info.invert_pxl_clk)
+		reg |= LCDC_RASTER_TIMING_2_PXCLK_INVERT;
+
+	if (info.sync_edge)
+		reg |= LCDC_RASTER_TIMING_2_HSVS_RISEFALL;
+
+	if (info.sync_ctrl)
+		reg |= LCDC_RASTER_TIMING_2_HSVS_CONTROL;
+
+	writel(reg, &regs->raster_timing2);
+
+	reg = LCDC_RASTER_CTRL_PALMODE_RAWDATA | LCDC_RASTER_CTRL_TFT_MODE |
+		LCDC_RASTER_CTRL_ENABLE | LCDC_RASTER_CTRL_REQDLY(info.fdd);
+
+	if (info.tft_alt_mode)
+		reg |= LCDC_RASTER_CTRL_TFT_ALT_ENABLE;
+
+	if (info.bpp == 24)
+		reg |= LCDC_RASTER_CTRL_TFT_24BPP_MODE;
+	else if (info.bpp == 32)
+		reg |= LCDC_RASTER_CTRL_TFT_24BPP_MODE |
+			LCDC_RASTER_CTRL_TFT_24BPP_UNPACK;
+
+	if (info.raster_order)
+		reg |= LCDC_RASTER_CTRL_DATA_ORDER;
+
+	writel(reg, &regs->raster_ctrl);
+
+	uc_priv->xsize = timing.hactive.typ;
+	uc_priv->ysize = timing.vactive.typ;
+	uc_priv->bpix = log_2_n_round_up(info.bpp);
+
+	err = panel_enable_backlight(panel);
+	if (err) {
+		dev_err(dev, "failed to enable panel backlight\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int tilcdc_of_to_plat(struct udevice *dev)
+{
+	struct tilcdc_priv *priv = dev_get_priv(dev);
+
+	priv->regs = (struct tilcdc_regs *)dev_read_addr(dev);
+	if ((fdt_addr_t)priv->regs == FDT_ADDR_T_NONE) {
+		dev_err(dev, "failed to get base address\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "LCD: base address=0x%x\n", (unsigned int)priv->regs);
+	return 0;
+}
+
+static int tilcdc_bind(struct udevice *dev)
+{
+	struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+
+	uc_plat->size = ((LCDC_MAX_WIDTH * LCDC_MAX_HEIGHT *
+			  (1 << LCDC_MAX_LOG2_BPP)) >> 3) + 0x20;
+
+	dev_dbg(dev, "frame buffer size 0x%x\n", uc_plat->size);
+	return 0;
+}
+
+static const struct udevice_id tilcdc_ids[] = {
+	{.compatible = "ti,am33xx-tilcdc"},
+	{}
+};
+
+U_BOOT_DRIVER(tilcdc) = {
+	.name = "tilcdc",
+	.id = UCLASS_VIDEO,
+	.of_match = tilcdc_ids,
+	.bind = tilcdc_bind,
+	.of_to_plat = tilcdc_of_to_plat,
+	.probe = tilcdc_probe,
+	.remove = tilcdc_remove,
+	.priv_auto = sizeof(struct tilcdc_priv)
+};
diff --git a/drivers/video/ti/tilcdc.h b/drivers/video/ti/tilcdc.h
new file mode 100644
index 00000000000..2645921df65
--- /dev/null
+++ b/drivers/video/ti/tilcdc.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
+ */
+
+#ifndef _TILCDC_H
+#define _TILCDC_H
+
+/**
+ * tilcdc_panel_info: Panel parameters
+ *
+ * @ac_bias: AC Bias Pin Frequency
+ * @ac_bias_intrpt: AC Bias Pin Transitions per Interrupt
+ * @dma_burst_sz: DMA burst size
+ * @bpp: Bits per pixel
+ * @fdd: FIFO DMA Request Delay
+ * @tft_alt_mode: TFT Alternative Signal Mapping (Only for active)
+ * @invert_pxl_clk: Invert pixel clock
+ * @sync_edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
+ * @sync_ctrl: Horizontal and Vertical Sync: Control: 0=ignore
+ * @raster_order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most
+ * @fifo_th: DMA FIFO threshold
+ */
+struct tilcdc_panel_info {
+	u32 ac_bias;
+	u32 ac_bias_intrpt;
+	u32 dma_burst_sz;
+	u32 bpp;
+	u32 fdd;
+	bool tft_alt_mode;
+	bool invert_pxl_clk;
+	u32 sync_edge;
+	u32 sync_ctrl;
+	u32 raster_order;
+	u32 fifo_th;
+};
+
+#endif /* _TILCDC_H */
diff --git a/drivers/video/tidss/Kconfig b/drivers/video/tidss/Kconfig
new file mode 100644
index 00000000000..2a5e56ea4ee
--- /dev/null
+++ b/drivers/video/tidss/Kconfig
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2023 Texas Instruments Incorporated - https://www.ti.com/
+# Nikhil M Jain, n-jain1@ti.com
+#
+# based on the linux tidss driver, which is
+#
+# (C) Copyright 2018 Texas Instruments Incorporated - https://www.ti.com/
+# Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+menuconfig VIDEO_TIDSS
+	bool "Enable TIDSS video support"
+	depends on VIDEO
+	help
+	  TIDSS supports  video output options LVDS and
+	  DPI . This option enables these supports which can be used on
+	  devices which have OLDI or HDMI display connected.
+
diff --git a/drivers/video/tidss/Makefile b/drivers/video/tidss/Makefile
new file mode 100644
index 00000000000..f4f8c6c470a
--- /dev/null
+++ b/drivers/video/tidss/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2023 Texas Instruments Incorporated - https://www.ti.com/
+# Nikhil M Jain, n-jain1@ti.com
+#
+# based on the linux tidss driver, which is
+#
+# (C) Copyright 2018 Texas Instruments Incorporated - https://www.ti.com/
+# Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+
+obj-${CONFIG_VIDEO_TIDSS} = tidss_drv.o
diff --git a/drivers/video/tidss/tidss_drv.c b/drivers/video/tidss/tidss_drv.c
new file mode 100644
index 00000000000..078e3e82e3a
--- /dev/null
+++ b/drivers/video/tidss/tidss_drv.c
@@ -0,0 +1,943 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Nikhil M Jain, n-jain1@ti.com
+ *
+ * based on the linux tidss driver, which is
+ *
+ * (C) Copyright 2018 Texas Instruments Incorporated - https://www.ti.com/
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <clk.h>
+#include <log.h>
+#include <video.h>
+#include <errno.h>
+#include <panel.h>
+#include <reset.h>
+#include <malloc.h>
+#include <fdtdec.h>
+#include <syscon.h>
+#include <regmap.h>
+#include <cpu_func.h>
+#include <media_bus_format.h>
+
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <asm/utils.h>
+#include <asm/bitops.h>
+
+#include <dm/devres.h>
+#include <dm/of_access.h>
+#include <dm/device_compat.h>
+#include <dm/device-internal.h>
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+
+#include "tidss_drv.h"
+#include "tidss_regs.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Panel parameters */
+enum {
+	LCD_MAX_WIDTH		= 1920,
+	LCD_MAX_HEIGHT		= 1200,
+	LCD_MAX_LOG2_BPP	= VIDEO_BPP32,
+};
+
+static const u16 *dss_common_regmap;
+
+static const u16 tidss_am62x_common_regs[DSS_COMMON_REG_TABLE_LEN] = {
+	[DSS_REVISION_OFF] =			0x4,
+	[DSS_SYSCONFIG_OFF] =			0x8,
+	[DSS_SYSSTATUS_OFF] =			0x20,
+	[DSS_IRQ_EOI_OFF] =			0x24,
+	[DSS_IRQSTATUS_RAW_OFF] =		0x28,
+	[DSS_IRQSTATUS_OFF] =			0x2c,
+	[DSS_IRQENABLE_SET_OFF] =		0x30,
+	[DSS_IRQENABLE_CLR_OFF] =		0x40,
+	[DSS_VID_IRQENABLE_OFF] =		0x44,
+	[DSS_VID_IRQSTATUS_OFF] =		0x58,
+	[DSS_VP_IRQENABLE_OFF] =		0x70,
+	[DSS_VP_IRQSTATUS_OFF] =		0x7c,
+
+	[WB_IRQENABLE_OFF] =			0x88,
+	[WB_IRQSTATUS_OFF] =			0x8c,
+
+	[DSS_GLOBAL_MFLAG_ATTRIBUTE_OFF] =	0x90,
+	[DSS_GLOBAL_OUTPUT_ENABLE_OFF] =	0x94,
+	[DSS_GLOBAL_BUFFER_OFF] =		0x98,
+	[DSS_CBA_CFG_OFF] =			0x9c,
+	[DSS_DBG_CONTROL_OFF] =		0xa0,
+	[DSS_DBG_STATUS_OFF] =		0xa4,
+	[DSS_CLKGATING_DISABLE_OFF] =		0xa8,
+	[DSS_SECURE_DISABLE_OFF] =		0xac,
+};
+
+/* TIDSS AM62x Features */
+const struct dss_features dss_am625_feats = {
+	.max_pclk_khz = {
+		[DSS_VP_DPI] = 165000,
+		[DSS_VP_OLDI] = 165000,
+	},
+
+	.subrev = DSS_AM625,
+
+	.common = "common",
+	.common_regs = tidss_am62x_common_regs,
+
+	.num_vps = 2,
+	.vp_name = { "vp1", "vp2" },
+	.ovr_name = { "ovr1", "ovr2" },
+	.vpclk_name =  { "vp1", "vp2" },
+	.vp_bus_type = { DSS_VP_OLDI, DSS_VP_DPI },
+
+	.vp_feat = { .color = {
+			.has_ctm = true,
+			.gamma_size = 256,
+			.gamma_type = TIDSS_GAMMA_8BIT,
+		},
+	},
+
+	.num_planes = 2,
+	/* note: vid is plane_id 0 and vidl1 is plane_id 1 */
+	.vid_name = { "vidl1", "vid1" },
+	.vid_lite = { true, false },
+	.vid_order = { 1, 0 },
+};
+
+/* Wrapper functions to write and read TI_DSS registers */
+static void dss_write(struct tidss_drv_priv *priv, u16 reg, u32 val)
+{
+	writel(val, priv->base_common + reg);
+}
+
+static u32 dss_read(struct tidss_drv_priv *priv, u16 reg)
+{
+	return readl(priv->base_common + reg);
+}
+
+static void dss_vid_write(struct tidss_drv_priv *priv, u32 hw_plane, u16 reg, u32 val)
+{
+	void __iomem *base = priv->base_vid[hw_plane];
+
+	writel(val, base + reg);
+}
+
+static u32 dss_vid_read(struct tidss_drv_priv *priv, u32 hw_plane, u16 reg)
+{
+	void __iomem *base = priv->base_vid[hw_plane];
+
+	return readl(base + reg);
+}
+
+static void dss_ovr_write(struct tidss_drv_priv *priv, u32 hw_videoport,
+			  u16 reg, u32 val)
+{
+	void __iomem *base = priv->base_ovr[hw_videoport];
+
+	writel(val, base + reg);
+}
+
+static u32 dss_ovr_read(struct tidss_drv_priv *priv, u32 hw_videoport, u16 reg)
+{
+	void __iomem *base = priv->base_ovr[hw_videoport];
+
+	return readl(base + reg);
+}
+
+static void dss_vp_write(struct tidss_drv_priv *priv, u32 hw_videoport,
+			 u16 reg, u32 val)
+{
+	void __iomem *base = priv->base_vp[hw_videoport];
+
+	writel(val, base + reg);
+}
+
+static u32 dss_vp_read(struct tidss_drv_priv *priv, u32 hw_videoport, u16 reg)
+{
+	void __iomem *base = priv->base_vp[hw_videoport];
+
+	return readl(base + reg);
+}
+
+/* generate mask on a register */
+static u32 FLD_MASK(u32 start, u32 end)
+{
+	return ((1 << (start - end + 1)) - 1) << end;
+}
+
+/* set the given val in specified range */
+static u32 FLD_VAL(u32 val, u32 start, u32 end)
+{
+	return (val << end) & FLD_MASK(start, end);
+}
+
+/* return the value in the specified range */
+static u32 FLD_GET(u32 val, u32 start, u32 end)
+{
+	return (val & FLD_MASK(start, end)) >> end;
+}
+
+/* modify the value of the specified range */
+static u32 FLD_MOD(u32 orig, u32 val, u32 start, u32 end)
+{
+	return (orig & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end);
+}
+
+/* read and modify common register region of DSS*/
+__maybe_unused
+static u32 REG_GET(struct tidss_drv_priv *priv, u32 idx, u32 start, u32 end)
+{
+	return FLD_GET(dss_read(priv, idx), start, end);
+}
+
+static void REG_FLD_MOD(struct tidss_drv_priv *priv, u32 idx, u32 val,
+			u32 start, u32 end)
+{
+	dss_write(priv, idx, FLD_MOD(dss_read(priv, idx), val,
+				     start, end));
+}
+
+/* read and modify planes vid1 and vid2 register of DSS*/
+static u32 VID_REG_GET(struct tidss_drv_priv *priv, u32 hw_plane, u32 idx,
+		       u32 start, u32 end)
+{
+	return FLD_GET(dss_vid_read(priv, hw_plane, idx), start, end);
+}
+
+static void VID_REG_FLD_MOD(struct tidss_drv_priv *priv, u32 hw_plane, u32 idx,
+			    u32 val, u32 start, u32 end)
+{
+	dss_vid_write(priv, hw_plane, idx,
+		      FLD_MOD(dss_vid_read(priv, hw_plane, idx),
+			      val, start, end));
+}
+
+/* read and modify port vid1 and vid2 registers of DSS*/
+__maybe_unused
+static u32 VP_REG_GET(struct tidss_drv_priv *priv, u32 vp, u32 idx,
+		      u32 start, u32 end)
+{
+	return FLD_GET(dss_vp_read(priv, vp, idx), start, end);
+}
+
+static void VP_REG_FLD_MOD(struct tidss_drv_priv *priv, u32 vp, u32 idx, u32 val,
+			   u32 start, u32 end)
+{
+	dss_vp_write(priv, vp, idx, FLD_MOD(dss_vp_read(priv, vp, idx),
+					    val, start, end));
+}
+
+/* read and modify overlay ovr1 and ovr2 registers of DSS*/
+__maybe_unused
+static u32 OVR_REG_GET(struct tidss_drv_priv *priv, u32 ovr, u32 idx,
+		       u32 start, u32 end)
+{
+	return FLD_GET(dss_ovr_read(priv, ovr, idx), start, end);
+}
+
+static void OVR_REG_FLD_MOD(struct tidss_drv_priv *priv, u32 ovr, u32 idx,
+			    u32 val, u32 start, u32 end)
+{
+	dss_ovr_write(priv, ovr, idx, FLD_MOD(dss_ovr_read(priv, ovr, idx),
+					      val, start, end));
+}
+
+static void dss_oldi_tx_power(struct tidss_drv_priv *priv, bool power)
+{
+	u32 val;
+
+	if (WARN_ON(!priv->oldi_io_ctrl))
+		return;
+
+	if (priv->feat->subrev == DSS_AM625) {
+		if (power) {
+			switch (priv->oldi_mode) {
+			case OLDI_SINGLE_LINK_SINGLE_MODE:
+				/* Power down OLDI TX 1 */
+				val = OLDI1_PWRDN_TX;
+				break;
+			case OLDI_DUAL_LINK:
+				/* No Power down */
+				val = 0;
+			break;
+			default:
+				/* Power down both the OLDI TXes */
+				val = OLDI_BANDGAP_PWR | OLDI0_PWRDN_TX | OLDI1_PWRDN_TX;
+				break;
+			}
+		} else {
+			val = OLDI_BANDGAP_PWR | OLDI0_PWRDN_TX | OLDI1_PWRDN_TX;
+		}
+		regmap_update_bits(priv->oldi_io_ctrl, OLDI_PD_CTRL,
+				   OLDI_BANDGAP_PWR | OLDI0_PWRDN_TX | OLDI1_PWRDN_TX, val);
+	}
+}
+
+static void dss_set_num_datalines(struct tidss_drv_priv *priv,
+				  u32 hw_videoport)
+{
+	int v;
+	u32 num_lines = priv->bus_format->data_width;
+
+	switch (num_lines) {
+	case 12:
+		v = 0; break;
+	case 16:
+		v = 1; break;
+	case 18:
+		v = 2; break;
+	case 24:
+		v = 3; break;
+	case 30:
+		v = 4; break;
+	case 36:
+		v = 5; break;
+	default:
+		WARN_ON(1);
+		v = 3;
+	}
+
+	VP_REG_FLD_MOD(priv, hw_videoport, DSS_VP_CONTROL, v, 10, 8);
+}
+
+static void dss_enable_oldi(struct tidss_drv_priv *priv, u32 hw_videoport)
+{
+	u32 oldi_cfg = 0;
+	u32 oldi_reset_bit = BIT(5 + hw_videoport);
+	int count = 0;
+
+	/*
+	 * For the moment MASTERSLAVE, and SRC bits of DSS_VP_DSS_OLDI_CFG are
+	 * set statically to 0.
+	 */
+
+	if (priv->bus_format->data_width == 24)
+		oldi_cfg |= BIT(8); /* MSB */
+	else if (priv->bus_format->data_width != 18)
+		dev_warn(priv->dev, "%s: %d port width not supported\n",
+			 __func__, priv->bus_format->data_width);
+
+	oldi_cfg |= BIT(7); /* DEPOL */
+
+	oldi_cfg = FLD_MOD(oldi_cfg, priv->bus_format->oldi_mode_reg_val, 3, 1);
+
+	oldi_cfg |= BIT(12); /* SOFTRST */
+
+	oldi_cfg |= BIT(0); /* ENABLE */
+
+	switch (priv->oldi_mode) {
+	case OLDI_MODE_OFF:
+		oldi_cfg &= ~BIT(0); /* DISABLE */
+		break;
+
+	case OLDI_SINGLE_LINK_SINGLE_MODE:
+		/* All configuration is done for this mode.  */
+		break;
+
+	case OLDI_SINGLE_LINK_DUPLICATE_MODE:
+		oldi_cfg |= BIT(5); /* DUPLICATE MODE */
+		break;
+
+	case OLDI_DUAL_LINK:
+		oldi_cfg |= BIT(11); /* DUALMODESYNC */
+		oldi_cfg |= BIT(3); /* data-mapping field also indicates dual-link mode */
+		break;
+
+	default:
+		dev_warn(priv->dev, "%s: Incorrect oldi mode. Returning.\n",
+			 __func__);
+		return;
+	}
+
+	dss_vp_write(priv, hw_videoport, DSS_VP_DSS_OLDI_CFG, oldi_cfg);
+
+	while (!(oldi_reset_bit & dss_read(priv, DSS_SYSSTATUS)) &&
+	       count < 10000)
+		count++;
+
+	if (!(oldi_reset_bit & dss_read(priv, DSS_SYSSTATUS)))
+		dev_warn(priv->dev, "%s: timeout waiting OLDI reset done\n",
+			 __func__);
+}
+
+static const struct dss_color_lut dss_vp_gamma_default_lut[] = {
+	{ .red = 0, .green = 0, .blue = 0, },
+	{ .red = U16_MAX, .green = U16_MAX, .blue = U16_MAX, },
+};
+
+static void dss_vp_write_gamma_table(struct tidss_drv_priv *priv,
+				     u32 hw_videoport)
+{
+	u32 *table = priv->vp_data[hw_videoport].gamma_table;
+	u32 hwlen = priv->feat->vp_feat.color.gamma_size;
+	unsigned int i;
+
+	dev_dbg(priv->dev, "%s: hw_videoport %d\n", __func__, hw_videoport);
+
+	for (i = 0; i < hwlen; ++i) {
+		u32 v = table[i];
+
+		v |= i << 24;
+
+		dss_vp_write(priv, hw_videoport, DSS_VP_GAMMA_TABLE, v);
+	}
+}
+
+static void dss_vp_set_gamma(struct tidss_drv_priv *priv,
+			     u32 hw_videoport, const struct dss_color_lut *lut,
+			     unsigned int length)
+{
+	u32 *table = priv->vp_data[hw_videoport].gamma_table;
+	u32 hwlen = priv->feat->vp_feat.color.gamma_size;
+	u32 hwbits;
+	unsigned int i;
+
+	dev_dbg(priv->dev, "%s: hw_videoport %d, lut len %u, hw len %u\n",
+		__func__, hw_videoport, length, hwlen);
+
+	if (priv->feat->vp_feat.color.gamma_type == TIDSS_GAMMA_10BIT)
+		hwbits = 10;
+	else
+		hwbits = 8;
+
+	lut = dss_vp_gamma_default_lut;
+	length = ARRAY_SIZE(dss_vp_gamma_default_lut);
+
+	for (i = 0; i < length - 1; ++i) {
+		unsigned int first = i * (hwlen - 1) / (length - 1);
+		unsigned int last = (i + 1) * (hwlen - 1) / (length - 1);
+		unsigned int w = last - first;
+		u16 r, g, b;
+		unsigned int j;
+
+		if (w == 0)
+			continue;
+
+		for (j = 0; j <= w; j++) {
+			r = (lut[i].red * (w - j) + lut[i + 1].red * j) / w;
+			g = (lut[i].green * (w - j) + lut[i + 1].green * j) / w;
+			b = (lut[i].blue * (w - j) + lut[i + 1].blue * j) / w;
+
+			r >>= 16 - hwbits;
+			g >>= 16 - hwbits;
+			b >>= 16 - hwbits;
+
+			table[first + j] = (r << (hwbits * 2)) |
+				(g << hwbits) | b;
+		}
+	}
+
+	dss_vp_write_gamma_table(priv, hw_videoport);
+}
+
+void dss_vp_enable(struct tidss_drv_priv *priv, u32 hw_videoport, struct display_timing *timing)
+{
+	bool align, onoff, rf, ieo, ipc, ihs, ivs;
+	u32 hsw, hfp, hbp, vsw, vfp, vbp;
+
+	dss_set_num_datalines(priv, hw_videoport);
+
+	/* panel parameters to set clocks for video port*/
+	hfp = timing->hfront_porch.typ;
+	hsw = timing->hsync_len.typ;
+	hbp = timing->hback_porch.typ;
+	vfp = timing->vfront_porch.typ;
+	vsw = timing->vsync_len.typ;
+	vbp = timing->vback_porch.typ;
+
+	dss_vp_write(priv, hw_videoport, DSS_VP_TIMING_H,
+		     FLD_VAL(hsw - 1, 7, 0) |
+		     FLD_VAL(hfp - 1, 19, 8) | FLD_VAL(hbp - 1, 31, 20));
+
+	dss_vp_write(priv, hw_videoport, DSS_VP_TIMING_V,
+		     FLD_VAL(vsw - 1, 7, 0) |
+		     FLD_VAL(vfp, 19, 8) | FLD_VAL(vbp, 31, 20));
+
+	ivs = !!(timing->flags & (1 << 3));
+
+	ihs = !!(timing->flags & (1 << 1));
+
+	ieo = 0;
+
+	ipc = 0;
+
+	/* always use the 'rf' setting */
+	onoff = true;
+
+	rf = true;
+
+	/* always use aligned syncs */
+	align = true;
+
+	/* always use DE_HIGH for OLDI */
+	if (priv->feat->vp_bus_type[hw_videoport] == DSS_VP_OLDI)
+		ieo = false;
+
+	dss_vp_write(priv, hw_videoport, DSS_VP_POL_FREQ,
+		     FLD_VAL(align, 18, 18) |
+		     FLD_VAL(onoff, 17, 17) |
+		     FLD_VAL(rf, 16, 16) |
+		     FLD_VAL(ieo, 15, 15) |
+		     FLD_VAL(ipc, 14, 14) |
+		     FLD_VAL(ihs, 13, 13) |
+		     FLD_VAL(ivs, 12, 12));
+
+	dss_vp_write(priv, hw_videoport, DSS_VP_SIZE_SCREEN,
+		     FLD_VAL(timing->hactive.typ - 1, 11, 0) |
+		     FLD_VAL(timing->vactive.typ - 1, 27, 16));
+
+	VP_REG_FLD_MOD(priv, hw_videoport, DSS_VP_CONTROL, 1, 0, 0);
+}
+
+enum c8_to_c12_mode { C8_TO_C12_REPLICATE, C8_TO_C12_MAX, C8_TO_C12_MIN };
+
+static u16 c8_to_c12(u8 c8, enum c8_to_c12_mode mode)
+{
+	u16 c12;
+
+	c12 = c8 << 4;
+
+	switch (mode) {
+	case C8_TO_C12_REPLICATE:
+		/* Copy c8 4 MSB to 4 LSB for full scale c12 */
+		c12 |= c8 >> 4;
+		break;
+	case C8_TO_C12_MAX:
+		c12 |= 0xF;
+		break;
+	default:
+	case C8_TO_C12_MIN:
+		break;
+	}
+
+	return c12;
+}
+
+static u64 argb8888_to_argb12121212(u32 argb8888, enum c8_to_c12_mode m)
+{
+	u8 a, r, g, b;
+	u64 v;
+
+	a = (argb8888 >> 24) & 0xff;
+	r = (argb8888 >> 16) & 0xff;
+	g = (argb8888 >> 8) & 0xff;
+	b = (argb8888 >> 0) & 0xff;
+
+	v = ((u64)c8_to_c12(a, m) << 36) | ((u64)c8_to_c12(r, m) << 24) |
+		((u64)c8_to_c12(g, m) << 12) | (u64)c8_to_c12(b, m);
+
+	return v;
+}
+
+static void dss_vp_set_default_color(struct tidss_drv_priv *priv,
+				     u32 hw_videoport, u32 default_color)
+{
+	u64 v;
+
+	v = argb8888_to_argb12121212(default_color, C8_TO_C12_REPLICATE);
+	dss_ovr_write(priv, hw_videoport,
+		      DSS_OVR_DEFAULT_COLOR, v & 0xffffffff);
+	dss_ovr_write(priv, hw_videoport,
+		      DSS_OVR_DEFAULT_COLOR2, (v >> 32) & 0xffff);
+}
+
+int dss_vp_enable_clk(struct tidss_drv_priv *priv, u32 hw_videoport)
+{
+	int ret = clk_prepare_enable(&priv->vp_clk[hw_videoport]);
+
+	if (ret)
+		dev_dbg(priv->dev, "%s: enabling clk failed: %d\n", __func__,
+			ret);
+
+	return ret;
+}
+
+void dss_vp_prepare(struct tidss_drv_priv *priv, u32 hw_videoport)
+{
+	dss_vp_set_gamma(priv, hw_videoport, NULL, 0);
+	dss_vp_set_default_color(priv, 0, 0);
+
+	if (priv->feat->vp_bus_type[hw_videoport] == DSS_VP_OLDI) {
+		dss_oldi_tx_power(priv, true);
+		dss_enable_oldi(priv, hw_videoport);
+	}
+}
+
+static
+unsigned int dss_pclk_diff(unsigned long rate, unsigned long real_rate)
+{
+	int r = rate / 100, rr = real_rate / 100;
+
+	return (unsigned int)(abs(((rr - r) * 100) / r));
+}
+
+int dss_vp_set_clk_rate(struct tidss_drv_priv *priv, u32 hw_videoport,
+			unsigned long rate)
+{
+	int r;
+	unsigned long new_rate;
+
+	/*
+	 * For AM625 OLDI video ports, the requested pixel clock needs to take into account the
+	 * serial clock required for the serialization of DPI signals into LVDS signals. The
+	 * incoming pixel clock on the OLDI video port gets divided by 7 whenever OLDI enable bit
+	 * gets set.
+	 */
+	if (priv->feat->vp_bus_type[hw_videoport] == DSS_VP_OLDI &&
+	    priv->feat->subrev == DSS_AM625)
+		rate *= 7;
+
+	r = clk_set_rate(&priv->vp_clk[hw_videoport], rate);
+
+	new_rate = clk_get_rate(&priv->vp_clk[hw_videoport]);
+
+	if (dss_pclk_diff(rate, new_rate) > 5)
+		dev_warn(priv->dev,
+			 "vp%d: Clock rate %lu differs over 5%% from requested %lu\n",
+			 hw_videoport, new_rate, rate);
+
+	dev_dbg(priv->dev, "vp%d: new rate %lu Hz (requested %lu Hz)\n",
+		hw_videoport, clk_get_rate(&priv->vp_clk[hw_videoport]), rate);
+	return 0;
+}
+
+static void dss_ovr_set_plane(struct tidss_drv_priv *priv,
+			      u32 hw_plane, u32 hw_ovr,
+			      u32 x, u32 y, u32 layer)
+{
+	OVR_REG_FLD_MOD(priv, hw_ovr, DSS_OVR_ATTRIBUTES(layer),
+			0x1, 4, 1);
+	OVR_REG_FLD_MOD(priv, hw_ovr, DSS_OVR_ATTRIBUTES(layer),
+			x, 17, 6);
+	OVR_REG_FLD_MOD(priv, hw_ovr, DSS_OVR_ATTRIBUTES(layer),
+			y, 30, 19);
+}
+
+void dss_ovr_enable_layer(struct tidss_drv_priv *priv,
+			  u32 hw_ovr, u32 layer, bool enable)
+{
+	OVR_REG_FLD_MOD(priv, hw_ovr, DSS_OVR_ATTRIBUTES(layer),
+			!!enable, 0, 0);
+}
+
+static void dss_vid_csc_enable(struct tidss_drv_priv *priv, u32 hw_plane,
+			       bool enable)
+{
+	VID_REG_FLD_MOD(priv, hw_plane, DSS_VID_ATTRIBUTES, !!enable, 9, 9);
+}
+
+int dss_plane_setup(struct tidss_drv_priv *priv, u32 hw_plane, u32 hw_videoport)
+{
+	VID_REG_FLD_MOD(priv, hw_plane, DSS_VID_ATTRIBUTES,
+			priv->pixel_format, 6, 1);
+
+	dss_vid_write(priv, hw_plane, DSS_VID_PICTURE_SIZE,
+		      ((LCD_MAX_WIDTH - 1) | ((LCD_MAX_HEIGHT - 1) << 16)));
+
+	dss_vid_csc_enable(priv, hw_plane, false);
+
+	dss_vid_write(priv, hw_plane, DSS_VID_GLOBAL_ALPHA, 0xFF);
+
+	VID_REG_FLD_MOD(priv, hw_plane, DSS_VID_ATTRIBUTES, 1, 28, 28);
+	return 0;
+}
+
+int dss_plane_enable(struct tidss_drv_priv *priv, u32 hw_plane, bool enable)
+{
+	VID_REG_FLD_MOD(priv, hw_plane, DSS_VID_ATTRIBUTES, !!enable, 0, 0);
+
+	return 0;
+}
+
+static u32 dss_vid_get_fifo_size(struct tidss_drv_priv *priv, u32 hw_plane)
+{
+	return VID_REG_GET(priv, hw_plane, DSS_VID_BUF_SIZE_STATUS, 15, 0);
+}
+
+static void dss_vid_set_mflag_threshold(struct tidss_drv_priv *priv,
+					u32 hw_plane, u32 low, u32 high)
+{
+	dss_vid_write(priv, hw_plane, DSS_VID_MFLAG_THRESHOLD,
+		      FLD_VAL(high, 31, 16) | FLD_VAL(low, 15, 0));
+}
+
+static
+void dss_vid_set_buf_threshold(struct tidss_drv_priv *priv,
+			       u32 hw_plane, u32 low, u32 high)
+{
+	dss_vid_write(priv, hw_plane, DSS_VID_BUF_THRESHOLD,
+		      FLD_VAL(high, 31, 16) | FLD_VAL(low, 15, 0));
+}
+
+static void dss_plane_init(struct tidss_drv_priv *priv)
+{
+	unsigned int hw_plane;
+	u32 cba_lo_pri = 1;
+	u32 cba_hi_pri = 0;
+
+	REG_FLD_MOD(priv, DSS_CBA_CFG, cba_lo_pri, 2, 0);
+	REG_FLD_MOD(priv, DSS_CBA_CFG, cba_hi_pri, 5, 3);
+
+	/* MFLAG_CTRL = ENABLED */
+	REG_FLD_MOD(priv, DSS_GLOBAL_MFLAG_ATTRIBUTE, 2, 1, 0);
+	/* MFLAG_START = MFLAGNORMALSTARTMODE */
+	REG_FLD_MOD(priv, DSS_GLOBAL_MFLAG_ATTRIBUTE, 0, 6, 6);
+
+	for (hw_plane = 0; hw_plane < priv->feat->num_planes; hw_plane++) {
+		u32 size = dss_vid_get_fifo_size(priv, hw_plane);
+		u32 thr_low, thr_high;
+		u32 mflag_low, mflag_high;
+		u32 preload;
+
+		thr_high = size - 1;
+		thr_low = size / 2;
+
+		mflag_high = size * 2 / 3;
+		mflag_low = size / 3;
+
+		preload = thr_low;
+
+		dev_dbg(priv->dev,
+			"%s: bufsize %u, buf_threshold %u/%u, mflag threshold %u/%u preload %u\n",
+			priv->feat->vid_name[hw_plane],
+			size,
+			thr_high, thr_low,
+			mflag_high, mflag_low,
+			preload);
+
+		dss_vid_set_buf_threshold(priv, hw_plane,
+					  thr_low, thr_high);
+		dss_vid_set_mflag_threshold(priv, hw_plane,
+					    mflag_low, mflag_high);
+
+		dss_vid_write(priv, hw_plane, DSS_VID_PRELOAD, preload);
+
+		/* Prefech up to PRELOAD value */
+		VID_REG_FLD_MOD(priv, hw_plane, DSS_VID_ATTRIBUTES, 0,
+				19, 19);
+	}
+}
+
+static void dss_vp_init(struct tidss_drv_priv *priv)
+{
+	unsigned int i;
+
+	/* Enable the gamma Shadow bit-field for all VPs*/
+	for (i = 0; i < priv->feat->num_vps; i++)
+		VP_REG_FLD_MOD(priv, i, DSS_VP_CONFIG, 1, 2, 2);
+}
+
+static int dss_init_am65x_oldi_io_ctrl(struct udevice *dev,
+				       struct tidss_drv_priv *priv)
+{
+	struct udevice *syscon;
+	struct regmap *regmap;
+	int ret = 0;
+
+	ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "ti,am65x-oldi-io-ctrl",
+					   &syscon);
+	if (ret) {
+		debug("unable to find ti,am65x-oldi-io-ctrl syscon device (%d)\n", ret);
+		return ret;
+	}
+
+	/* get grf-reg base address */
+	regmap = syscon_get_regmap(syscon);
+	if (!regmap) {
+		debug("unable to find rockchip grf regmap\n");
+		return -ENODEV;
+	}
+	priv->oldi_io_ctrl = regmap;
+	return 0;
+}
+
+static int tidss_drv_probe(struct udevice *dev)
+{
+	struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct tidss_drv_priv *priv = dev_get_priv(dev);
+	struct udevice *panel = NULL;
+	struct display_timing timings;
+	unsigned int i;
+	int ret = 0;
+	const char *mode;
+
+	priv->dev = dev;
+
+	priv->feat = &dss_am625_feats;
+
+    /*
+     * set your plane format based on your bmp image
+     * Supported 24bpp and 32bpp bmpimages
+     */
+
+	priv->pixel_format = DSS_FORMAT_XRGB8888;
+
+	dss_common_regmap = priv->feat->common_regs;
+
+	ret = uclass_first_device_err(UCLASS_PANEL, &panel);
+	if (ret) {
+		if (ret != -ENODEV)
+			dev_err(dev, "panel device error %d\n", ret);
+		return ret;
+	}
+
+	ret = panel_get_display_timing(panel, &timings);
+	if (ret) {
+		ret = ofnode_decode_panel_timing(dev_ofnode(panel),
+						 &timings);
+		if (ret) {
+			dev_err(dev, "decode display timing error %d\n", ret);
+			return ret;
+		}
+	}
+
+	mode = ofnode_read_string(dev_ofnode(panel), "data-mapping");
+	if (!mode) {
+		debug("%s: Could not read mode property\n", dev->name);
+		return -EINVAL;
+	}
+
+	uc_priv->bpix = VIDEO_BPP32;
+
+	if (!strcmp(mode, "vesa-24"))
+		priv->bus_format = &dss_bus_formats[7];
+	else
+		priv->bus_format = &dss_bus_formats[8];
+
+	/* Common address */
+	priv->base_common = dev_remap_addr_index(dev, 0);
+	if (!priv->base_common)
+		return -EINVAL;
+
+	/* plane address setup and enable */
+	for (i = 0; i < priv->feat->num_planes; i++) {
+		priv->base_vid[i] = dev_remap_addr_index(dev, i + 2);
+		if (!priv->base_vid[i])
+			return -EINVAL;
+	}
+
+	dss_vid_write(priv, 0, DSS_VID_BA_0, uc_plat->base & 0xffffffff);
+	dss_vid_write(priv, 0, DSS_VID_BA_EXT_0, (u64)uc_plat->base >> 32);
+	dss_vid_write(priv, 0, DSS_VID_BA_1, uc_plat->base & 0xffffffff);
+	dss_vid_write(priv, 0, DSS_VID_BA_EXT_1, (u64)uc_plat->base >> 32);
+
+	ret = dss_plane_setup(priv, 0, 0);
+	if (ret) {
+		dss_plane_enable(priv, 0, false);
+			return ret;
+	}
+
+	dss_plane_enable(priv, 0, true);
+	dss_plane_init(priv);
+
+	/* video port address clocks and enable */
+	for (i = 0; i < priv->feat->num_vps; i++) {
+		priv->base_ovr[i] = dev_remap_addr_index(dev, i + 4);
+		priv->base_vp[i] = dev_remap_addr_index(dev, i + 6);
+	}
+
+	ret = clk_get_by_name(dev, "vp1", &priv->vp_clk[0]);
+	if (ret) {
+		dev_err(dev, "video port %d clock enable error %d\n", i, ret);
+		return ret;
+	}
+
+	dss_ovr_set_plane(priv, 1, 0, 0, 0, 0);
+	dss_ovr_enable_layer(priv, 0, 0, true);
+
+	/* Video Port cloks */
+	dss_vp_enable_clk(priv, 0);
+
+	dss_vp_set_clk_rate(priv, 0, timings.pixelclock.typ * 1000);
+
+	priv->oldi_mode = OLDI_MODE_OFF;
+	uc_priv->xsize = timings.hactive.typ;
+	uc_priv->ysize = timings.vactive.typ;
+	if (priv->feat->subrev == DSS_AM65X || priv->feat->subrev == DSS_AM625) {
+		priv->oldi_mode = OLDI_DUAL_LINK;
+		if (priv->oldi_mode) {
+			ret = dss_init_am65x_oldi_io_ctrl(dev, priv);
+			if (ret)
+				return ret;
+		}
+	}
+
+	dss_vp_prepare(priv, 0);
+	dss_vp_enable(priv, 0, &timings);
+	dss_vp_init(priv);
+
+	ret = clk_get_by_name(dev, "fck", &priv->fclk);
+	if (ret) {
+		dev_err(dev, "peripheral clock get error %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_enable(&priv->fclk);
+	if (ret) {
+		dev_err(dev, "peripheral clock enable error %d\n", ret);
+		return ret;
+	}
+
+	if (IS_ERR(&priv->fclk)) {
+		dev_err(dev, "%s: Failed to get fclk: %ld\n",
+			__func__, PTR_ERR(&priv->fclk));
+		return PTR_ERR(&priv->fclk);
+	}
+
+	dev_dbg(dev, "DSS fclk %lu Hz\n", clk_get_rate(&priv->fclk));
+
+	video_set_flush_dcache(dev, true);
+	return 0;
+}
+
+static int tidss_drv_remove(struct udevice *dev)
+{
+	u32 val;
+	int ret;
+	struct tidss_drv_priv *priv = dev_get_priv(dev);
+
+	priv->base_common = dev_remap_addr_index(dev, 0);
+	REG_FLD_MOD(priv, DSS_SYSCONFIG, 1, 1, 1);
+	/* Wait for reset to complete */
+	ret = readl_poll_timeout(priv->base_common + DSS_SYSSTATUS,
+				 val, val & 1, 5000);
+	if (ret) {
+		dev_warn(priv->dev, "failed to reset priv\n");
+		return ret;
+	}
+	return 0;
+}
+
+static int tidss_drv_bind(struct udevice *dev)
+{
+	struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+
+	uc_plat->size = ((LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
+			  (1 << LCD_MAX_LOG2_BPP)) >> 3) + 0x20;
+	return 0;
+}
+
+static const struct udevice_id tidss_drv_ids[] = {
+	{ .compatible = "ti,am625-dss" },
+	{ }
+};
+
+U_BOOT_DRIVER(tidss_drv) = {
+	.name = "tidss_drv",
+	.id = UCLASS_VIDEO,
+	.of_match = tidss_drv_ids,
+	.bind = tidss_drv_bind,
+	.probe = tidss_drv_probe,
+	.remove = tidss_drv_remove,
+	.priv_auto = sizeof(struct tidss_drv_priv),
+	.flags = DM_FLAG_OS_PREPARE,
+};
diff --git a/drivers/video/tidss/tidss_drv.h b/drivers/video/tidss/tidss_drv.h
new file mode 100644
index 00000000000..e229d975ff4
--- /dev/null
+++ b/drivers/video/tidss/tidss_drv.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Nikhil M Jain, n-jain1@ti.com
+ *
+ * based on the linux tidss driver, which is
+ *
+ * (C) Copyright 2018 Texas Instruments Incorporated - https://www.ti.com/
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ */
+
+#ifndef __TIDSS_DRV_H__
+#define __TIDSS_DRV_H__
+
+#include <media_bus_format.h>
+
+#define TIDSS_MAX_PORTS 4
+#define TIDSS_MAX_PLANES 4
+
+enum dss_vp_bus_type {
+	DSS_VP_DPI,		/* DPI output */
+	DSS_VP_OLDI,		/* OLDI (LVDS) output */
+	DSS_VP_INTERNAL,	/* SoC internal routing */
+	DSS_VP_MAX_BUS_TYPE,
+};
+
+enum dss_oldi_modes {
+	OLDI_MODE_OFF,				/* OLDI turned off / tied off in IP. */
+	OLDI_SINGLE_LINK_SINGLE_MODE,		/* Single Output over OLDI 0. */
+	OLDI_SINGLE_LINK_DUPLICATE_MODE,	/* Duplicate Output over OLDI 0 and 1. */
+	OLDI_DUAL_LINK,				/* Combined Output over OLDI 0 and 1. */
+};
+
+struct dss_features_scaling {
+	u32 in_width_max_5tap_rgb;
+	u32 in_width_max_3tap_rgb;
+	u32 in_width_max_5tap_yuv;
+	u32 in_width_max_3tap_yuv;
+	u32 upscale_limit;
+	u32 downscale_limit_5tap;
+	u32 downscale_limit_3tap;
+	u32 xinc_max;
+};
+
+enum tidss_gamma_type { TIDSS_GAMMA_8BIT, TIDSS_GAMMA_10BIT };
+
+/* choose specific DSS based on the board */
+enum dss_subrevision {
+	DSS_K2G,
+	DSS_AM65X,
+	DSS_J721E,
+	DSS_AM625,
+};
+
+struct tidss_vp_feat {
+	struct tidss_vp_color_feat {
+		u32 gamma_size;
+		enum tidss_gamma_type gamma_type;
+		bool has_ctm;
+	} color;
+};
+
+struct dss_color_lut {
+	/*
+	 * Data is U0.16 fixed point format.
+	 */
+	__u16 red;
+	__u16 green;
+	__u16 blue;
+	__u16 reserved;
+};
+
+struct dss_vp_data {
+	u32 *gamma_table;
+};
+
+struct dss_features {
+	int min_pclk_khz;
+	int max_pclk_khz[DSS_VP_MAX_BUS_TYPE];
+
+	struct dss_features_scaling scaling;
+
+	enum dss_subrevision subrev;
+
+	const char *common;
+	const u16 *common_regs;
+	u32 num_vps;
+	const char *vp_name[TIDSS_MAX_PORTS]; /* Should match dt reg names */
+	const char *ovr_name[TIDSS_MAX_PORTS]; /* Should match dt reg names */
+	const char *vpclk_name[TIDSS_MAX_PORTS]; /* Should match dt clk names */
+	const enum dss_vp_bus_type vp_bus_type[TIDSS_MAX_PORTS];
+	struct tidss_vp_feat vp_feat;
+	u32 num_planes;
+	const char *vid_name[TIDSS_MAX_PLANES]; /* Should match dt reg names */
+	bool vid_lite[TIDSS_MAX_PLANES];
+	u32 vid_order[TIDSS_MAX_PLANES];
+};
+
+enum dss_oldi_mode_reg_val { SPWG_18 = 0, JEIDA_24 = 1, SPWG_24 = 2 };
+
+struct dss_bus_format {
+	u32 bus_fmt;
+	u32 data_width;
+	bool is_oldi_fmt;
+	enum dss_oldi_mode_reg_val oldi_mode_reg_val;
+};
+
+static struct dss_bus_format dss_bus_formats[] = {
+	{ MEDIA_BUS_FMT_RGB444_1X12,		12, false, 0 },
+	{ MEDIA_BUS_FMT_RGB565_1X16,		16, false, 0 },
+	{ MEDIA_BUS_FMT_RGB666_1X18,		18, false, 0 },
+	{ MEDIA_BUS_FMT_RGB888_1X24,		24, false, 0 },
+	{ MEDIA_BUS_FMT_RGB101010_1X30,		30, false, 0 },
+	{ MEDIA_BUS_FMT_RGB121212_1X36,		36, false, 0 },
+	{ MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,	18, true, SPWG_18 },
+	{ MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,	24, true, SPWG_24 },
+	{ MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,	24, true, JEIDA_24 },
+};
+
+struct tidss_drv_priv {
+	struct udevice *dev;
+	void __iomem *base_common; /* common register region of dss*/
+	void __iomem *base_vid[TIDSS_MAX_PLANES]; /* plane register region of dss*/
+	void __iomem *base_ovr[TIDSS_MAX_PORTS]; /* overlay register region of dss*/
+	void __iomem *base_vp[TIDSS_MAX_PORTS]; /* video port register region of dss*/
+	struct regmap *oldi_io_ctrl;
+	struct clk vp_clk[TIDSS_MAX_PORTS];
+	const struct dss_features *feat;
+	struct clk fclk;
+	struct dss_vp_data vp_data[TIDSS_MAX_PORTS];
+	enum dss_oldi_modes oldi_mode;
+	struct dss_bus_format *bus_format;
+	u32 pixel_format;
+	u32 memory_bandwidth_limit;
+};
+
+#endif
diff --git a/drivers/video/tidss/tidss_regs.h b/drivers/video/tidss/tidss_regs.h
new file mode 100644
index 00000000000..440db8d1c7a
--- /dev/null
+++ b/drivers/video/tidss/tidss_regs.h
@@ -0,0 +1,292 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Nikhil M Jain, n-jain1@ti.com
+ *
+ * based on the linux tidss driver, which is
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ * Author: Jyri Sarha <jsarha@ti.com>
+ */
+
+#ifndef __TIDSS_REGS_H
+#define __TIDSS_REGS_H
+
+enum dss_common_regs {
+	NOT_APPLICABLE_OFF = 0,
+	DSS_REVISION_OFF,
+	DSS_SYSCONFIG_OFF,
+	DSS_SYSSTATUS_OFF,
+	DSS_IRQ_EOI_OFF,
+	DSS_IRQSTATUS_RAW_OFF,
+	DSS_IRQSTATUS_OFF,
+	DSS_IRQENABLE_SET_OFF,
+	DSS_IRQENABLE_CLR_OFF,
+	DSS_VID_IRQENABLE_OFF,
+	DSS_VID_IRQSTATUS_OFF,
+	DSS_VP_IRQENABLE_OFF,
+	DSS_VP_IRQSTATUS_OFF,
+	WB_IRQENABLE_OFF,
+	WB_IRQSTATUS_OFF,
+	DSS_GLOBAL_MFLAG_ATTRIBUTE_OFF,
+	DSS_GLOBAL_OUTPUT_ENABLE_OFF,
+	DSS_GLOBAL_BUFFER_OFF,
+	DSS_CBA_CFG_OFF,
+	DSS_DBG_CONTROL_OFF,
+	DSS_DBG_STATUS_OFF,
+	DSS_CLKGATING_DISABLE_OFF,
+	DSS_SECURE_DISABLE_OFF,
+	FBDC_REVISION_1_OFF,
+	FBDC_REVISION_2_OFF,
+	FBDC_REVISION_3_OFF,
+	FBDC_REVISION_4_OFF,
+	FBDC_REVISION_5_OFF,
+	FBDC_REVISION_6_OFF,
+	FBDC_COMMON_CONTROL_OFF,
+	FBDC_CONSTANT_COLOR_0_OFF,
+	FBDC_CONSTANT_COLOR_1_OFF,
+	DSS_CONNECTIONS_OFF,
+	DSS_MSS_VP1_OFF,
+	DSS_MSS_VP3_OFF,
+	DSS_COMMON_REG_TABLE_LEN,
+};
+
+/*
+ * dss_common_regmap should be defined as const u16 * and pointing
+ * to a valid dss common register map for the platform, before the
+ * macros bellow can be used.
+ */
+
+#define REG(r) (dss_common_regmap[r ## _OFF])
+
+#define DSS_REVISION			REG(DSS_REVISION)
+#define DSS_SYSCONFIG			REG(DSS_SYSCONFIG)
+#define DSS_SYSSTATUS			REG(DSS_SYSSTATUS)
+#define DSS_IRQ_EOI			REG(DSS_IRQ_EOI)
+#define DSS_IRQSTATUS_RAW		REG(DSS_IRQSTATUS_RAW)
+#define DSS_IRQSTATUS			REG(DSS_IRQSTATUS)
+#define DSS_IRQENABLE_SET		REG(DSS_IRQENABLE_SET)
+#define DSS_IRQENABLE_CLR		REG(DSS_IRQENABLE_CLR)
+#define DSS_VID_IRQENABLE(n)		(REG(DSS_VID_IRQENABLE) + (n) * 4)
+#define DSS_VID_IRQSTATUS(n)		(REG(DSS_VID_IRQSTATUS) + (n) * 4)
+#define DSS_VP_IRQENABLE(n)		(REG(DSS_VP_IRQENABLE) + (n) * 4)
+#define DSS_VP_IRQSTATUS(n)		(REG(DSS_VP_IRQSTATUS) + (n) * 4)
+#define WB_IRQENABLE			REG(WB_IRQENABLE)
+#define WB_IRQSTATUS			REG(WB_IRQSTATUS)
+
+#define DSS_GLOBAL_MFLAG_ATTRIBUTE	REG(DSS_GLOBAL_MFLAG_ATTRIBUTE)
+#define DSS_GLOBAL_OUTPUT_ENABLE	REG(DSS_GLOBAL_OUTPUT_ENABLE)
+#define DSS_GLOBAL_BUFFER		REG(DSS_GLOBAL_BUFFER)
+#define DSS_CBA_CFG			REG(DSS_CBA_CFG)
+#define DSS_DBG_CONTROL		REG(DSS_DBG_CONTROL)
+#define DSS_DBG_STATUS		REG(DSS_DBG_STATUS)
+#define DSS_CLKGATING_DISABLE		REG(DSS_CLKGATING_DISABLE)
+#define DSS_SECURE_DISABLE		REG(DSS_SECURE_DISABLE)
+
+#define FBDC_REVISION_1			REG(FBDC_REVISION_1)
+#define FBDC_REVISION_2			REG(FBDC_REVISION_2)
+#define FBDC_REVISION_3			REG(FBDC_REVISION_3)
+#define FBDC_REVISION_4			REG(FBDC_REVISION_4)
+#define FBDC_REVISION_5			REG(FBDC_REVISION_5)
+#define FBDC_REVISION_6			REG(FBDC_REVISION_6)
+#define FBDC_COMMON_CONTROL		REG(FBDC_COMMON_CONTROL)
+#define FBDC_CONSTANT_COLOR_0		REG(FBDC_CONSTANT_COLOR_0)
+#define FBDC_CONSTANT_COLOR_1		REG(FBDC_CONSTANT_COLOR_1)
+#define DSS_CONNECTIONS		REG(DSS_CONNECTIONS)
+#define DSS_MSS_VP1			REG(DSS_MSS_VP1)
+#define DSS_MSS_VP3			REG(DSS_MSS_VP3)
+
+/* VID */
+
+#define DSS_VID_ACCUH_0		0x0
+#define DSS_VID_ACCUH_1		0x4
+#define DSS_VID_ACCUH2_0		0x8
+#define DSS_VID_ACCUH2_1		0xc
+#define DSS_VID_ACCUV_0		0x10
+#define DSS_VID_ACCUV_1		0x14
+#define DSS_VID_ACCUV2_0		0x18
+#define DSS_VID_ACCUV2_1		0x1c
+#define DSS_VID_ATTRIBUTES		0x20
+#define DSS_VID_ATTRIBUTES2		0x24
+#define DSS_VID_BA_0			0x28
+#define DSS_VID_BA_1			0x2c
+#define DSS_VID_BA_UV_0		0x30
+#define DSS_VID_BA_UV_1		0x34
+#define DSS_VID_BUF_SIZE_STATUS	0x38
+#define DSS_VID_BUF_THRESHOLD		0x3c
+#define DSS_VID_CSC_COEF(n)		(0x40 + (n) * 4)
+
+#define DSS_VID_FIRH			0x5c
+#define DSS_VID_FIRH2			0x60
+#define DSS_VID_FIRV			0x64
+#define DSS_VID_FIRV2			0x68
+
+#define DSS_VID_FIR_COEFS_H0		0x6c
+#define DSS_VID_FIR_COEF_H0(phase)	(0x6c + (phase) * 4)
+#define DSS_VID_FIR_COEFS_H0_C	0x90
+#define DSS_VID_FIR_COEF_H0_C(phase)	(0x90 + (phase) * 4)
+
+#define DSS_VID_FIR_COEFS_H12		0xb4
+#define DSS_VID_FIR_COEF_H12(phase)	(0xb4 + (phase) * 4)
+#define DSS_VID_FIR_COEFS_H12_C	0xf4
+#define DSS_VID_FIR_COEF_H12_C(phase)	(0xf4 + (phase) * 4)
+
+#define DSS_VID_FIR_COEFS_V0		0x134
+#define DSS_VID_FIR_COEF_V0(phase)	(0x134 + (phase) * 4)
+#define DSS_VID_FIR_COEFS_V0_C	0x158
+#define DSS_VID_FIR_COEF_V0_C(phase)	(0x158 + (phase) * 4)
+
+#define DSS_VID_FIR_COEFS_V12		0x17c
+#define DSS_VID_FIR_COEF_V12(phase)	(0x17c + (phase) * 4)
+#define DSS_VID_FIR_COEFS_V12_C	0x1bc
+#define DSS_VID_FIR_COEF_V12_C(phase)	(0x1bc + (phase) * 4)
+
+#define DSS_VID_GLOBAL_ALPHA		0x1fc
+#define DSS_VID_K2G_IRQENABLE		0x200 /* K2G */
+#define DSS_VID_K2G_IRQSTATUS		0x204 /* K2G */
+#define DSS_VID_MFLAG_THRESHOLD	0x208
+#define DSS_VID_PICTURE_SIZE		0x20c
+#define DSS_VID_PIXEL_INC		0x210
+#define DSS_VID_K2G_POSITION		0x214 /* K2G */
+#define DSS_VID_PRELOAD		0x218
+#define DSS_VID_ROW_INC		0x21c
+#define DSS_VID_SIZE			0x220
+#define DSS_VID_BA_EXT_0		0x22c
+#define DSS_VID_BA_EXT_1		0x230
+#define DSS_VID_BA_UV_EXT_0		0x234
+#define DSS_VID_BA_UV_EXT_1		0x238
+#define DSS_VID_CSC_COEF7		0x23c
+#define DSS_VID_ROW_INC_UV		0x248
+#define DSS_VID_CLUT			0x260
+#define DSS_VID_SAFETY_ATTRIBUTES	0x2a0
+#define DSS_VID_SAFETY_CAPT_SIGNATURE	0x2a4
+#define DSS_VID_SAFETY_POSITION	0x2a8
+#define DSS_VID_SAFETY_REF_SIGNATURE	0x2ac
+#define DSS_VID_SAFETY_SIZE		0x2b0
+#define DSS_VID_SAFETY_LFSR_SEED	0x2b4
+#define DSS_VID_LUMAKEY		0x2b8
+#define DSS_VID_DMA_BUFSIZE		0x2bc /* J721E */
+
+/* OVR */
+
+#define DSS_OVR_CONFIG		0x0
+#define DSS_OVR_VIRTVP		0x4 /* J721E */
+#define DSS_OVR_DEFAULT_COLOR		0x8
+#define DSS_OVR_DEFAULT_COLOR2	0xc
+#define DSS_OVR_TRANS_COLOR_MAX	0x10
+#define DSS_OVR_TRANS_COLOR_MAX2	0x14
+#define DSS_OVR_TRANS_COLOR_MIN	0x18
+#define DSS_OVR_TRANS_COLOR_MIN2	0x1c
+#define DSS_OVR_ATTRIBUTES(n)		(0x20 + (n) * 4)
+#define DSS_OVR_ATTRIBUTES2(n)	(0x34 + (n) * 4) /* J721E */
+/* VP */
+
+#define  DSS_VP_CONFIG				0x0
+#define DSS_VP_CONTROL			0x4
+#define DSS_VP_CSC_COEF0			0x8
+#define DSS_VP_CSC_COEF1			0xc
+#define DSS_VP_CSC_COEF2			0x10
+#define DSS_VP_DATA_CYCLE_0			0x14
+#define DSS_VP_DATA_CYCLE_1			0x18
+#define DSS_VP_K2G_GAMMA_TABLE		0x20 /* K2G */
+#define DSS_VP_K2G_IRQENABLE			0x3c /* K2G */
+#define DSS_VP_K2G_IRQSTATUS			0x40 /* K2G */
+#define DSS_VP_DATA_CYCLE_2			0x1c
+#define DSS_VP_LINE_NUMBER			0x44
+#define DSS_VP_POL_FREQ			0x4c
+#define DSS_VP_SIZE_SCREEN			0x50
+#define DSS_VP_TIMING_H			0x54
+#define DSS_VP_TIMING_V			0x58
+#define DSS_VP_CSC_COEF3			0x5c
+#define DSS_VP_CSC_COEF4			0x60
+#define DSS_VP_CSC_COEF5			0x64
+#define DSS_VP_CSC_COEF6			0x68
+#define DSS_VP_CSC_COEF7			0x6c
+#define DSS_VP_SAFETY_ATTRIBUTES_0		0x70
+#define DSS_VP_SAFETY_ATTRIBUTES_1		0x74
+#define DSS_VP_SAFETY_ATTRIBUTES_2		0x78
+#define DSS_VP_SAFETY_ATTRIBUTES_3		0x7c
+#define DSS_VP_SAFETY_CAPT_SIGNATURE_0	0x90
+#define DSS_VP_SAFETY_CAPT_SIGNATURE_1	0x94
+#define DSS_VP_SAFETY_CAPT_SIGNATURE_2	0x98
+#define DSS_VP_SAFETY_CAPT_SIGNATURE_3	0x9c
+#define DSS_VP_SAFETY_POSITION_0		0xb0
+#define DSS_VP_SAFETY_POSITION_1		0xb4
+#define DSS_VP_SAFETY_POSITION_2		0xb8
+#define DSS_VP_SAFETY_POSITION_3		0xbc
+#define DSS_VP_SAFETY_REF_SIGNATURE_0		0xd0
+#define DSS_VP_SAFETY_REF_SIGNATURE_1		0xd4
+#define DSS_VP_SAFETY_REF_SIGNATURE_2		0xd8
+#define DSS_VP_SAFETY_REF_SIGNATURE_3		0xdc
+#define DSS_VP_SAFETY_SIZE_0			0xf0
+#define DSS_VP_SAFETY_SIZE_1			0xf4
+#define DSS_VP_SAFETY_SIZE_2			0xf8
+#define DSS_VP_SAFETY_SIZE_3			0xfc
+#define DSS_VP_SAFETY_LFSR_SEED		0x110
+#define DSS_VP_GAMMA_TABLE			0x120
+#define DSS_VP_DSS_OLDI_CFG			0x160
+#define DSS_VP_DSS_OLDI_STATUS		0x164
+#define DSS_VP_DSS_OLDI_LB			0x168
+#define DSS_VP_DSS_MERGE_SPLIT		0x16c /* J721E */
+#define DSS_VP_DSS_DMA_THREADSIZE		0x170 /* J721E */
+#define DSS_VP_DSS_DMA_THREADSIZE_STATUS	0x174 /* J721E */
+
+/*
+ * OLDI IO_CTRL register offsets. On AM654 the registers are found
+ * from CTRL_MMR0, there the syscon regmap should map 0x14 bytes from
+ * CTRLMMR0P1_OLDI_DAT0_IO_CTRL to CTRLMMR0P1_OLDI_CLK_IO_CTRL
+ * register range.
+ */
+#define OLDI_DAT0_IO_CTRL			0x00
+#define OLDI_DAT1_IO_CTRL			0x04
+#define OLDI_DAT2_IO_CTRL			0x08
+#define OLDI_DAT3_IO_CTRL			0x0C
+#define OLDI_CLK_IO_CTRL			0x10
+
+/* Only for AM625 OLDI TX */
+#define OLDI_PD_CTRL				0x100
+#define OLDI_LB_CTRL				0x104
+
+#define OLDI_BANDGAP_PWR			BIT(8)
+#define OLDI_PWRDN_TX				BIT(8)
+#define OLDI0_PWRDN_TX				BIT(0)
+#define OLDI1_PWRDN_TX				BIT(1)
+
+/* Supported plane formats */
+#define DSS_FORMAT_ARGB4444 0x0
+#define DSS_FORMAT_ABGR4444 0x1
+#define DSS_FORMAT_RGBA4444 0x2
+
+#define DSS_FORMAT_RGB565 0x3
+#define DSS_FORMAT_BGR565 0x4
+
+#define DSS_FORMAT_ARGB1555 0x5
+#define DSS_FORMAT_ABGR1555 0x6
+
+#define DSS_FORMAT_ARGB8888 0x7
+#define DSS_FORMAT_ABGR8888 0x8
+#define DSS_FORMAT_RGBA8888 0x9
+#define DSS_FORMAT_BGRA8888 0xa
+
+#define DSS_FORMAT_RGB888 0xb
+#define DSS_FORMAT_BGR888 0xc
+
+#define DSS_FORMAT_ARGB2101010 0xe
+#define DSS_FORMAT_ABGR2101010 0xf
+
+#define DSS_FORMAT_XRGB4444 0x20
+#define DSS_FORMAT_XBGR4444 0x21
+#define DSS_FORMAT_RGBX4444 0x22
+
+#define DSS_FORMAT_XRGB1555 0x25
+#define DSS_FORMAT_XBGR1555 0x26
+
+#define DSS_FORMAT_XRGB8888 0x27
+#define DSS_FORMAT_XBGR8888 0x28
+#define DSS_FORMAT_RGBX8888 0x29
+#define DSS_FORMAT_BGRX8888 0x2a
+
+#define DSS_FORMAT_XRGB2101010 0x2e,
+#define DSS_FORMAT_XBGR2101010 0x2f,
+
+#endif /* __TIDSS_DSS_REGS_H */