net: phy: micrel: Remove ksz90x1 drivers from micrel_ksz8xxx

There should be no longer be any ksz9000 users that pick up the PHY
driver from ksz8xxx, so remove ksz9000 remnants from there.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

1 files changed, 1 insertions, 357 deletions

diff --git a/drivers/net/phy/micrel_ksz8xxx.c b/drivers/net/phy/micrel_ksz8xxx.c
index 552592bb44e..ec628bb27ad 100644
--- a/drivers/net/phy/micrel_ksz8xxx.c
+++ b/drivers/net/phy/micrel_ksz8xxx.c
@@ -151,11 +151,7 @@ static struct phy_driver ksz8895_driver = {
 	.shutdown = &genphy_shutdown,
 };
 
-#ifndef CONFIG_PHY_MICREL_KSZ9021
-/*
- * I can't believe Micrel used the exact same part number
- * for the KSZ9021. Shame Micrel, Shame!
- */
+/* Micrel used the exact same part number for the KSZ9021. */
 static struct phy_driver KS8721_driver = {
 	.name = "Micrel KS8721BL",
 	.uid = 0x221610,
@@ -165,353 +161,6 @@ static struct phy_driver KS8721_driver = {
 	.startup = &genphy_startup,
 	.shutdown = &genphy_shutdown,
 };
-#endif
-
-
-/*
- * KSZ9021 - KSZ9031 common
- */
-
-#define MII_KSZ90xx_PHY_CTL		0x1f
-#define MIIM_KSZ90xx_PHYCTL_1000	(1 << 6)
-#define MIIM_KSZ90xx_PHYCTL_100		(1 << 5)
-#define MIIM_KSZ90xx_PHYCTL_10		(1 << 4)
-#define MIIM_KSZ90xx_PHYCTL_DUPLEX	(1 << 3)
-
-static int ksz90xx_startup(struct phy_device *phydev)
-{
-	unsigned phy_ctl;
-	int ret;
-
-	ret = genphy_update_link(phydev);
-	if (ret)
-		return ret;
-
-	phy_ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ90xx_PHY_CTL);
-
-	if (phy_ctl & MIIM_KSZ90xx_PHYCTL_DUPLEX)
-		phydev->duplex = DUPLEX_FULL;
-	else
-		phydev->duplex = DUPLEX_HALF;
-
-	if (phy_ctl & MIIM_KSZ90xx_PHYCTL_1000)
-		phydev->speed = SPEED_1000;
-	else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_100)
-		phydev->speed = SPEED_100;
-	else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_10)
-		phydev->speed = SPEED_10;
-	return 0;
-}
-
-/* Common OF config bits for KSZ9021 and KSZ9031 */
-#if defined(CONFIG_PHY_MICREL_KSZ9021) || defined(CONFIG_PHY_MICREL_KSZ9031)
-#ifdef CONFIG_DM_ETH
-struct ksz90x1_reg_field {
-	const char	*name;
-	const u8	size;	/* Size of the bitfield, in bits */
-	const u8	off;	/* Offset from bit 0 */
-	const u8	dflt;	/* Default value */
-};
-
-struct ksz90x1_ofcfg {
-	const u16			reg;
-	const u16			devad;
-	const struct ksz90x1_reg_field	*grp;
-	const u16			grpsz;
-};
-
-static const struct ksz90x1_reg_field ksz90x1_rxd_grp[] = {
-	{ "rxd0-skew-ps", 4, 0, 0x7 }, { "rxd1-skew-ps", 4, 4, 0x7 },
-	{ "rxd2-skew-ps", 4, 8, 0x7 }, { "rxd3-skew-ps", 4, 12, 0x7 }
-};
-
-static const struct ksz90x1_reg_field ksz90x1_txd_grp[] = {
-	{ "txd0-skew-ps", 4, 0, 0x7 }, { "txd1-skew-ps", 4, 4, 0x7 },
-	{ "txd2-skew-ps", 4, 8, 0x7 }, { "txd3-skew-ps", 4, 12, 0x7 },
-};
-
-static int ksz90x1_of_config_group(struct phy_device *phydev,
-				   struct ksz90x1_ofcfg *ofcfg)
-{
-	struct udevice *dev = phydev->dev;
-	struct phy_driver *drv = phydev->drv;
-	const int ps_to_regval = 60;
-	int val[4];
-	int i, changed = 0, offset, max;
-	u16 regval = 0;
-
-	if (!drv || !drv->writeext)
-		return -EOPNOTSUPP;
-
-	for (i = 0; i < ofcfg->grpsz; i++) {
-		val[i] = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
-					 ofcfg->grp[i].name, -1);
-		offset = ofcfg->grp[i].off;
-		if (val[i] == -1) {
-			/* Default register value for KSZ9021 */
-			regval |= ofcfg->grp[i].dflt << offset;
-		} else {
-			changed = 1;	/* Value was changed in OF */
-			/* Calculate the register value and fix corner cases */
-			if (val[i] > ps_to_regval * 0xf) {
-				max = (1 << ofcfg->grp[i].size) - 1;
-				regval |= max << offset;
-			} else {
-				regval |= (val[i] / ps_to_regval) << offset;
-			}
-		}
-	}
-
-	if (!changed)
-		return 0;
-
-	return drv->writeext(phydev, 0, ofcfg->devad, ofcfg->reg, regval);
-}
-#endif
-#endif
-
-#ifdef CONFIG_PHY_MICREL_KSZ9021
-/*
- * KSZ9021
- */
-
-/* PHY Registers */
-#define MII_KSZ9021_EXTENDED_CTRL	0x0b
-#define MII_KSZ9021_EXTENDED_DATAW	0x0c
-#define MII_KSZ9021_EXTENDED_DATAR	0x0d
-
-#define CTRL1000_PREFER_MASTER		(1 << 10)
-#define CTRL1000_CONFIG_MASTER		(1 << 11)
-#define CTRL1000_MANUAL_CONFIG		(1 << 12)
-
-#if defined(CONFIG_DM_ETH) && (defined(CONFIG_PHY_MICREL_KSZ9021) || \
-			       defined(CONFIG_PHY_MICREL_KSZ9031))
-static const struct ksz90x1_reg_field ksz9021_clk_grp[] = {
-	{ "txen-skew-ps", 4, 0, 0x7 }, { "txc-skew-ps", 4, 4, 0x7 },
-	{ "rxdv-skew-ps", 4, 8, 0x7 }, { "rxc-skew-ps", 4, 12, 0x7 },
-};
-
-static int ksz9021_of_config(struct phy_device *phydev)
-{
-	struct ksz90x1_ofcfg ofcfg[] = {
-		{ MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0, ksz90x1_rxd_grp, 4 },
-		{ MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0, ksz90x1_txd_grp, 4 },
-		{ MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0, ksz9021_clk_grp, 4 },
-	};
-	int i, ret = 0;
-
-	for (i = 0; i < ARRAY_SIZE(ofcfg); i++) {
-		ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-#else
-static int ksz9021_of_config(struct phy_device *phydev)
-{
-	return 0;
-}
-#endif
-
-int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val)
-{
-	/* extended registers */
-	phy_write(phydev, MDIO_DEVAD_NONE,
-		MII_KSZ9021_EXTENDED_CTRL, regnum | 0x8000);
-	return phy_write(phydev, MDIO_DEVAD_NONE,
-		MII_KSZ9021_EXTENDED_DATAW, val);
-}
-
-int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum)
-{
-	/* extended registers */
-	phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_CTRL, regnum);
-	return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_DATAR);
-}
-
-
-static int ksz9021_phy_extread(struct phy_device *phydev, int addr, int devaddr,
-			      int regnum)
-{
-	return ksz9021_phy_extended_read(phydev, regnum);
-}
-
-static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr,
-			       int devaddr, int regnum, u16 val)
-{
-	return ksz9021_phy_extended_write(phydev, regnum, val);
-}
-
-/* Micrel ksz9021 */
-static int ksz9021_config(struct phy_device *phydev)
-{
-	unsigned ctrl1000 = 0;
-	const unsigned master = CTRL1000_PREFER_MASTER |
-			CTRL1000_CONFIG_MASTER | CTRL1000_MANUAL_CONFIG;
-	unsigned features = phydev->drv->features;
-	int ret;
-
-	ret = ksz9021_of_config(phydev);
-	if (ret)
-		return ret;
-
-	if (getenv("disable_giga"))
-		features &= ~(SUPPORTED_1000baseT_Half |
-				SUPPORTED_1000baseT_Full);
-	/* force master mode for 1000BaseT due to chip errata */
-	if (features & SUPPORTED_1000baseT_Half)
-		ctrl1000 |= ADVERTISE_1000HALF | master;
-	if (features & SUPPORTED_1000baseT_Full)
-		ctrl1000 |= ADVERTISE_1000FULL | master;
-	phydev->advertising = features;
-	phydev->supported = features;
-	phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, ctrl1000);
-	genphy_config_aneg(phydev);
-	genphy_restart_aneg(phydev);
-	return 0;
-}
-
-static struct phy_driver ksz9021_driver = {
-	.name = "Micrel ksz9021",
-	.uid  = 0x221610,
-	.mask = 0xfffff0,
-	.features = PHY_GBIT_FEATURES,
-	.config = &ksz9021_config,
-	.startup = &ksz90xx_startup,
-	.shutdown = &genphy_shutdown,
-	.writeext = &ksz9021_phy_extwrite,
-	.readext = &ksz9021_phy_extread,
-};
-#endif
-
-/**
- * KSZ9031
- */
-/* PHY Registers */
-#define MII_KSZ9031_MMD_ACCES_CTRL	0x0d
-#define MII_KSZ9031_MMD_REG_DATA	0x0e
-
-#if defined(CONFIG_DM_ETH) && (defined(CONFIG_PHY_MICREL_KSZ9021) || \
-			       defined(CONFIG_PHY_MICREL_KSZ9031))
-static const struct ksz90x1_reg_field ksz9031_ctl_grp[] =
-	{ { "txen-skew-ps", 4, 0, 0x7 }, { "rxdv-skew-ps", 4, 4, 0x7 } };
-static const struct ksz90x1_reg_field ksz9031_clk_grp[] =
-	{ { "rxc-skew-ps", 5, 0, 0xf }, { "txc-skew-ps", 5, 5, 0xf } };
-
-static int ksz9031_of_config(struct phy_device *phydev)
-{
-	struct ksz90x1_ofcfg ofcfg[] = {
-		{ MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, 2, ksz9031_ctl_grp, 2 },
-		{ MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 },
-		{ MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 },
-		{ MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, 2, ksz9031_clk_grp, 2 },
-	};
-	int i, ret = 0;
-
-	for (i = 0; i < ARRAY_SIZE(ofcfg); i++) {
-		ret = ksz90x1_of_config_group(phydev, &(ofcfg[i]));
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int ksz9031_center_flp_timing(struct phy_device *phydev)
-{
-	struct phy_driver *drv = phydev->drv;
-	int ret = 0;
-
-	if (!drv || !drv->writeext)
-		return -EOPNOTSUPP;
-
-	ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_LO, 0x1A80);
-	if (ret)
-		return ret;
-
-	ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_HI, 0x6);
-	return ret;
-}
-#else
-static int ksz9031_of_config(struct phy_device *phydev)
-{
-	return 0;
-}
-static int ksz9031_center_flp_timing(struct phy_device *phydev)
-{
-	return 0;
-}
-#endif
-
-/* Accessors to extended registers*/
-int ksz9031_phy_extended_write(struct phy_device *phydev,
-			       int devaddr, int regnum, u16 mode, u16 val)
-{
-	/*select register addr for mmd*/
-	phy_write(phydev, MDIO_DEVAD_NONE,
-		  MII_KSZ9031_MMD_ACCES_CTRL, devaddr);
-	/*select register for mmd*/
-	phy_write(phydev, MDIO_DEVAD_NONE,
-		  MII_KSZ9031_MMD_REG_DATA, regnum);
-	/*setup mode*/
-	phy_write(phydev, MDIO_DEVAD_NONE,
-		  MII_KSZ9031_MMD_ACCES_CTRL, (mode | devaddr));
-	/*write the value*/
-	return	phy_write(phydev, MDIO_DEVAD_NONE,
-		MII_KSZ9031_MMD_REG_DATA, val);
-}
-
-int ksz9031_phy_extended_read(struct phy_device *phydev, int devaddr,
-			      int regnum, u16 mode)
-{
-	phy_write(phydev, MDIO_DEVAD_NONE,
-		  MII_KSZ9031_MMD_ACCES_CTRL, devaddr);
-	phy_write(phydev, MDIO_DEVAD_NONE,
-		  MII_KSZ9031_MMD_REG_DATA, regnum);
-	phy_write(phydev, MDIO_DEVAD_NONE,
-		  MII_KSZ9031_MMD_ACCES_CTRL, (devaddr | mode));
-	return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9031_MMD_REG_DATA);
-}
-
-static int ksz9031_phy_extread(struct phy_device *phydev, int addr, int devaddr,
-			       int regnum)
-{
-	return ksz9031_phy_extended_read(phydev, devaddr, regnum,
-					 MII_KSZ9031_MOD_DATA_NO_POST_INC);
-}
-
-static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr,
-				int devaddr, int regnum, u16 val)
-{
-	return ksz9031_phy_extended_write(phydev, devaddr, regnum,
-					 MII_KSZ9031_MOD_DATA_POST_INC_RW, val);
-}
-
-static int ksz9031_config(struct phy_device *phydev)
-{
-	int ret;
-	ret = ksz9031_of_config(phydev);
-	if (ret)
-		return ret;
-	ret = ksz9031_center_flp_timing(phydev);
-	if (ret)
-		return ret;
-	return genphy_config(phydev);
-}
-
-static struct phy_driver ksz9031_driver = {
-	.name = "Micrel ksz9031",
-	.uid  = 0x221620,
-	.mask = 0xfffff0,
-	.features = PHY_GBIT_FEATURES,
-	.config   = &ksz9031_config,
-	.startup  = &ksz90xx_startup,
-	.shutdown = &genphy_shutdown,
-	.writeext = &ksz9031_phy_extwrite,
-	.readext = &ksz9031_phy_extread,
-};
 
 int ksz886x_config(struct phy_device *phydev)
 {
@@ -544,12 +193,7 @@ int phy_micrel_ksz8xxx_init(void)
 	phy_register(&KSZ8031_driver);
 	phy_register(&KSZ8051_driver);
 	phy_register(&KSZ8081_driver);
-#ifdef CONFIG_PHY_MICREL_KSZ9021
-	phy_register(&ksz9021_driver);
-#else
 	phy_register(&KS8721_driver);
-#endif
-	phy_register(&ksz9031_driver);
 	phy_register(&ksz8895_driver);
 	phy_register(&ksz886x_driver);
 	return 0;