net: Remove smc91111 ethernet driver

This driver has not been converted to DM_ETH.  The migration deadline
passed 2 years ago.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: David Feng <fenghua@phytium.com.cn>
Cc: Liviu Dudau <liviu.dudau@foss.arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Ramon Fried <rfried.dev@gmail.com>

2 files changed, 0 insertions, 373 deletions

diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile
index d4be0c7350d..5b48a9d43c6 100644
--- a/examples/standalone/Makefile
+++ b/examples/standalone/Makefile
@@ -4,7 +4,6 @@
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 
 extra-y        := hello_world
-extra-$(CONFIG_SMC91111)           += smc91111_eeprom
 extra-$(CONFIG_SPI_FLASH_ATMEL)    += atmel_df_pow2
 extra-$(CONFIG_PPC)                += sched
 
diff --git a/examples/standalone/smc91111_eeprom.c b/examples/standalone/smc91111_eeprom.c
deleted file mode 100644
index bf7e9306430..00000000000
--- a/examples/standalone/smc91111_eeprom.c
+++ /dev/null
@@ -1,372 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2004
- * Robin Getz rgetz@blacfin.uclinux.org
- *
- * Heavily borrowed from the following peoples GPL'ed software:
- *  - Wolfgang Denk, DENX Software Engineering, wd@denx.de
- *       Das U-Boot
- *  - Ladislav Michl ladis@linux-mips.org
- *       A rejected patch on the U-Boot mailing list
- */
-
-#include <common.h>
-#include <exports.h>
-#include <linux/delay.h>
-#include "../drivers/net/smc91111.h"
-
-#ifndef SMC91111_EEPROM_INIT
-# define SMC91111_EEPROM_INIT()
-#endif
-
-#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
-#define EEPROM		0x1
-#define MAC		0x2
-#define UNKNOWN		0x4
-
-void dump_reg (struct eth_device *dev);
-void dump_eeprom (struct eth_device *dev);
-int write_eeprom_reg (struct eth_device *dev, int value, int reg);
-void copy_from_eeprom (struct eth_device *dev);
-void print_MAC (struct eth_device *dev);
-int read_eeprom_reg (struct eth_device *dev, int reg);
-void print_macaddr (struct eth_device *dev);
-
-int smc91111_eeprom(int argc, char *const argv[])
-{
-	int c, i, j, done, line, reg, value, start, what;
-	char input[50];
-
-	struct eth_device dev;
-	dev.iobase = CONFIG_SMC91111_BASE;
-
-	/* Print the ABI version */
-	app_startup (argv);
-	if (XF_VERSION != (int) get_version ()) {
-		printf ("Expects ABI version %d\n", XF_VERSION);
-		printf ("Actual U-Boot ABI version %d\n",
-			(int) get_version ());
-		printf ("Can't run\n\n");
-		return (0);
-	}
-
-	SMC91111_EEPROM_INIT();
-
-	if ((SMC_inw (&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
-		printf ("Can't find SMSC91111\n");
-		return (0);
-	}
-
-	done = 0;
-	what = UNKNOWN;
-	printf ("\n");
-	while (!done) {
-		/* print the prompt */
-		printf ("SMC91111> ");
-		line = 0;
-		i = 0;
-		start = 1;
-		while (!line) {
-			/* Wait for a keystroke */
-			while (!tstc ());
-
-			c = getc ();
-			/* Make Uppercase */
-			if (c >= 'Z')
-				c -= ('a' - 'A');
-			/* printf(" |%02x| ",c); */
-
-			switch (c) {
-			case '\r':	/* Enter                */
-			case '\n':
-				input[i] = 0;
-				puts ("\r\n");
-				line = 1;
-				break;
-			case '\0':	/* nul                  */
-				continue;
-
-			case 0x03:	/* ^C - break           */
-				input[0] = 0;
-				i = 0;
-				line = 1;
-				done = 1;
-				break;
-
-			case 0x5F:
-			case 0x08:	/* ^H  - backspace      */
-			case 0x7F:	/* DEL - backspace      */
-				if (i > 0) {
-					puts ("\b \b");
-					i--;
-				}
-				break;
-			default:
-				if (start) {
-					if ((c == 'W') || (c == 'D')
-					    || (c == 'M') || (c == 'C')
-					    || (c == 'P')) {
-						putc (c);
-						input[i] = c;
-						if (i <= 45)
-							i++;
-						start = 0;
-					}
-				} else {
-					if ((c >= '0' && c <= '9')
-					    || (c >= 'A' && c <= 'F')
-					    || (c == 'E') || (c == 'M')
-					    || (c == ' ')) {
-						putc (c);
-						input[i] = c;
-						if (i <= 45)
-							i++;
-						break;
-					}
-				}
-				break;
-			}
-		}
-
-		for (; i < 49; i++)
-			input[i] = 0;
-
-		switch (input[0]) {
-		case ('W'):
-			/* Line should be w reg value */
-			i = 0;
-			reg = 0;
-			value = 0;
-			/* Skip to the next space or end) */
-			while ((input[i] != ' ') && (input[i] != 0))
-				i++;
-
-			if (input[i] != 0)
-				i++;
-
-			/* Are we writing to EEPROM or MAC */
-			switch (input[i]) {
-			case ('E'):
-				what = EEPROM;
-				break;
-			case ('M'):
-				what = MAC;
-				break;
-			default:
-				what = UNKNOWN;
-				break;
-			}
-
-			/* skip to the next space or end */
-			while ((input[i] != ' ') && (input[i] != 0))
-				i++;
-			if (input[i] != 0)
-				i++;
-
-			/* Find register to write into */
-			j = 0;
-			while ((input[i] != ' ') && (input[i] != 0)) {
-				j = input[i] - 0x30;
-				if (j >= 0xA) {
-					j -= 0x07;
-				}
-				reg = (reg * 0x10) + j;
-				i++;
-			}
-
-			while ((input[i] != ' ') && (input[i] != 0))
-				i++;
-
-			if (input[i] != 0)
-				i++;
-			else
-				what = UNKNOWN;
-
-			/* Get the value to write */
-			j = 0;
-			while ((input[i] != ' ') && (input[i] != 0)) {
-				j = input[i] - 0x30;
-				if (j >= 0xA) {
-					j -= 0x07;
-				}
-				value = (value * 0x10) + j;
-				i++;
-			}
-
-			switch (what) {
-			case 1:
-				printf ("Writing EEPROM register %02x with %04x\n", reg, value);
-				write_eeprom_reg (&dev, value, reg);
-				break;
-			case 2:
-				printf ("Writing MAC register bank %i, reg %02x with %04x\n", reg >> 4, reg & 0xE, value);
-				SMC_SELECT_BANK (&dev, reg >> 4);
-				SMC_outw (&dev, value, reg & 0xE);
-				break;
-			default:
-				printf ("Wrong\n");
-				break;
-			}
-			break;
-		case ('D'):
-			dump_eeprom (&dev);
-			break;
-		case ('M'):
-			dump_reg (&dev);
-			break;
-		case ('C'):
-			copy_from_eeprom (&dev);
-			break;
-		case ('P'):
-			print_macaddr (&dev);
-			break;
-		default:
-			break;
-		}
-
-	}
-
-	return (0);
-}
-
-void copy_from_eeprom (struct eth_device *dev)
-{
-	int i;
-
-	SMC_SELECT_BANK (dev, 1);
-	SMC_outw (dev, (SMC_inw (dev, CTL_REG) & !CTL_EEPROM_SELECT) |
-		CTL_RELOAD, CTL_REG);
-	i = 100;
-	while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --i)
-		udelay(100);
-	if (i == 0) {
-		printf ("Timeout Refreshing EEPROM registers\n");
-	} else {
-		printf ("EEPROM contents copied to MAC\n");
-	}
-
-}
-
-void print_macaddr (struct eth_device *dev)
-{
-	int i, j, k, mac[6];
-
-	printf ("Current MAC Address in SMSC91111 ");
-	SMC_SELECT_BANK (dev, 1);
-	for (i = 0; i < 5; i++) {
-		printf ("%02x:", SMC_inb (dev, ADDR0_REG + i));
-	}
-
-	printf ("%02x\n", SMC_inb (dev, ADDR0_REG + 5));
-
-	i = 0;
-	for (j = 0x20; j < 0x23; j++) {
-		k = read_eeprom_reg (dev, j);
-		mac[i] = k & 0xFF;
-		i++;
-		mac[i] = k >> 8;
-		i++;
-	}
-
-	printf ("Current MAC Address in EEPROM    ");
-	for (i = 0; i < 5; i++)
-		printf ("%02x:", mac[i]);
-	printf ("%02x\n", mac[5]);
-
-}
-void dump_eeprom (struct eth_device *dev)
-{
-	int j, k;
-
-	printf ("IOS2-0    ");
-	for (j = 0; j < 8; j++) {
-		printf ("%03x     ", j);
-	}
-	printf ("\n");
-
-	for (k = 0; k < 4; k++) {
-		if (k == 0)
-			printf ("CONFIG ");
-		if (k == 1)
-			printf ("BASE   ");
-		if ((k == 2) || (k == 3))
-			printf ("       ");
-		for (j = 0; j < 0x20; j += 4) {
-			printf ("%02x:%04x ", j + k,
-				read_eeprom_reg (dev, j + k));
-		}
-		printf ("\n");
-	}
-
-	for (j = 0x20; j < 0x40; j++) {
-		if ((j & 0x07) == 0)
-			printf ("\n");
-		printf ("%02x:%04x ", j, read_eeprom_reg (dev, j));
-	}
-	printf ("\n");
-
-}
-
-int read_eeprom_reg (struct eth_device *dev, int reg)
-{
-	int timeout;
-
-	SMC_SELECT_BANK (dev, 2);
-	SMC_outw (dev, reg, PTR_REG);
-
-	SMC_SELECT_BANK (dev, 1);
-	SMC_outw (dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT |
-		CTL_RELOAD, CTL_REG);
-	timeout = 100;
-	while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --timeout)
-		udelay(100);
-	if (timeout == 0) {
-		printf ("Timeout Reading EEPROM register %02x\n", reg);
-		return 0;
-	}
-
-	return SMC_inw (dev, GP_REG);
-
-}
-
-int write_eeprom_reg (struct eth_device *dev, int value, int reg)
-{
-	int timeout;
-
-	SMC_SELECT_BANK (dev, 2);
-	SMC_outw (dev, reg, PTR_REG);
-
-	SMC_SELECT_BANK (dev, 1);
-	SMC_outw (dev, value, GP_REG);
-	SMC_outw (dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT |
-		CTL_STORE, CTL_REG);
-	timeout = 100;
-	while ((SMC_inw (dev, CTL_REG) & CTL_STORE) && --timeout)
-		udelay(100);
-	if (timeout == 0) {
-		printf ("Timeout Writing EEPROM register %02x\n", reg);
-		return 0;
-	}
-
-	return 1;
-
-}
-
-void dump_reg (struct eth_device *dev)
-{
-	int i, j;
-
-	printf ("    ");
-	for (j = 0; j < 4; j++) {
-		printf ("Bank%i ", j);
-	}
-	printf ("\n");
-	for (i = 0; i < 0xF; i += 2) {
-		printf ("%02x  ", i);
-		for (j = 0; j < 4; j++) {
-			SMC_SELECT_BANK (dev, j);
-			printf ("%04x  ", SMC_inw (dev, i));
-		}
-		printf ("\n");
-	}
-}