Merge branch 'master' of git://88.191.163.10/u-boot-arm

Fixup an easy conflict over adding the clk_get prototype and USB_OTG
defines for am33xx having moved.

Conflicts:
	arch/arm/include/asm/arch-am33xx/hardware.h

Signed-off-by: Tom Rini <trini@ti.com>

1 files changed, 18 insertions, 102 deletions

diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
index 8561a248c41..d1f18bc45c3 100644
--- a/include/configs/apx4devkit.h
+++ b/include/configs/apx4devkit.h
@@ -11,34 +11,16 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __CONFIGS_APX4DEVKIT_H__
+#define __CONFIGS_APX4DEVKIT_H__
 
-/* SoC configurations */
+/* System configurations */
 #define CONFIG_MX28				/* i.MX28 SoC */
-#define CONFIG_MXS_GPIO				/* GPIO control */
-#define CONFIG_SYS_HZ		1000		/* Ticks per second */
-
 #define MACH_TYPE_APX4DEVKIT	3712
 #define CONFIG_MACH_TYPE	MACH_TYPE_APX4DEVKIT
 
-#include <asm/arch/regs-base.h>
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_ARCH_MISC_INIT
-
-/* SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
-#define CONFIG_SPL_START_S_PATH	"arch/arm/cpu/arm926ejs/mxs"
-#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-
 /* U-Boot Commands */
+#define CONFIG_SYS_NO_FLASH
 #include <config_cmd_default.h>
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DOS_PARTITION
@@ -58,78 +40,26 @@
 #define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_USB
 
-/* Memory configurations */
+/* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
 #define PHYS_SDRAM_1			0x40000000	/* Base address */
 #define PHYS_SDRAM_1_SIZE		0x20000000	/* Max 512 MB RAM */
-#define CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
-#define CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
-#define CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
-/* Point initial SP in SRAM so SPL can use it too. */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x00000000
-#define CONFIG_SYS_INIT_RAM_SIZE	(128 * 1024)
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/*
- * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
- * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
- * binary. In case there was more of this mess, 0x100 bytes are skipped.
- */
-#define CONFIG_SYS_TEXT_BASE		0x40000100
 
+/* Environment */
 #define CONFIG_ENV_OVERWRITE
-
-/* U-Boot general configurations */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT		"=> "
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O buffer size */
-#define CONFIG_SYS_PBSIZE	\
-	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-						/* Print buffer size */
-#define CONFIG_SYS_MAXARGS		32	/* Max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-						/* Boot argument buffer size */
-#define CONFIG_VERSION_VARIABLE			/* U-Boot version */
-#define CONFIG_AUTO_COMPLETE			/* Command auto complete */
-#define CONFIG_CMDLINE_EDITING			/* Command history etc. */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_OF_LIBFDT
 #define CONFIG_ENV_IS_IN_NAND
 
-/* Serial Driver */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK		24000000
-#define CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
-#define CONFIG_CONS_INDEX		0
-#define CONFIG_BAUDRATE			115200	/* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/* DMA */
-#define CONFIG_APBH_DMA
-
-/* MMC Driver */
-#ifdef CONFIG_ENV_IS_IN_MMC
+/* Environment is in MMC */
+#if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_ENV_OFFSET		(256 * 1024)
 #define CONFIG_ENV_SIZE			(16 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #endif
 
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_MXS_MMC
-#endif
-
-/* NAND Driver */
-#ifdef CONFIG_ENV_IS_IN_NAND
+/* Environment is in NAND */
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
 #define CONFIG_ENV_SIZE			(128 * 1024)
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
@@ -139,12 +69,8 @@
 		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 #endif
 
+/* UBI and NAND partitioning */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_MXS
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x60000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_MTDPARTS
@@ -159,43 +85,30 @@
 #define MTDPARTS_DEFAULT		""
 #endif
 
-/* Ethernet on SOC (FEC) */
+/* FEC Ethernet on SoC */
 #ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
 #define CONFIG_NET_MULTI
 #define CONFIG_ETHPRIME			"FEC"
-#define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC_PHYADDR		0
 #define IMX_FEC_BASE			MXS_ENET0_BASE
-#define CONFIG_MII
-#define CONFIG_FEC_XCV_TYPE		RMII
 #endif
 
 /* USB */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MXS
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
-#define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_STORAGE
 #endif
 
-/* I2C */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_I2C_MXS
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		400000
-#endif
 
 /* RTC */
-#if defined(CONFIG_CMD_DATE)
+#ifdef CONFIG_CMD_DATE
 #define CONFIG_RTC_PCF8563
 #define CONFIG_SYS_I2C_RTC_ADDR		0x51
 #endif
 
 /* Boot Linux */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTDELAY		1
 #define CONFIG_BOOTFILE			"uImage"
 #define CONFIG_BOOTCOMMAND		"run bootcmd_nand"
@@ -225,4 +138,7 @@
 		"ext2load mmc 0:2 41000000 boot/uImage && bootm 41000000\0" \
 ""
 
-#endif /* __CONFIG_H */
+/* The rest of the configuration is shared */
+#include <configs/mxs.h>
+
+#endif /* __CONFIGS_APX4DEVKIT_H__ */