ARM64: hikey: hi6220: Add u-boot support for the 96boards CE HiKey board.

HiKey is the first 96boards consumer edition compliant board. It features a hi6220
SoC which has eight ARM A53 cpu's.

This initial port adds support for: -
1) Serial
2) eMMC / SD card
3) USB
4) GPIO

It has been tested with Arm Trusted Firmware running u-boot as the BL33 executable.

Notes:

eMMC has been tested with basic reading of eMMC partition into DDR. I have not
tested writing / erasing. Due to lack of clock control it won't be
running in the most performant high speed mode.

SD card slot has been tested for reading and booting kernels into DDR.
It is also currently configured to save the u-boot environment to the
SD card.

USB has been tested with ASIX networking adapter to tftpboot kernels
into DDR. On v2015.07-rc2 dhcp now works, and also USB mass storage
are correctly enumerated.

GPIO has been tested using gpio toggle GPIO4_1-3 to flash the LEDs.

Basic SoC datasheet can be found here: -
https://github.com/96boards/documentation/blob/master/hikey/
Hi6220V100_Multi-Mode_Application_Processor_Function_Description.pdf

Board schematic can be found here: -
https://github.com/96boards/documentation/blob/master/hikey/
96Boards-Hikey-Rev-A1.pdf

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>

1 files changed, 159 insertions, 0 deletions

diff --git a/include/configs/hikey.h b/include/configs/hikey.h
new file mode 100644
index 00000000000..8ff9077c371
--- /dev/null
+++ b/include/configs/hikey.h
@@ -0,0 +1,159 @@
+/*
+ * (C) Copyright 2015 Linaro
+ *
+ * Peter Griffin <peter.griffin@linaro.org>
+ *
+ * Configuration for HiKey 96boards CE. Parts were derived from other ARM
+ * configurations.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __HIKEY_H
+#define __HIKEY_H
+
+/* We use generic board for hikey */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_POWER
+#define CONFIG_POWER_HI6553
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/* Cache Definitions */
+#define CONFIG_SYS_DCACHE_OFF
+
+#define CONFIG_IDENT_STRING		"hikey"
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_LIBFDT
+
+/* Physical Memory Map */
+
+/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
+#define CONFIG_SYS_TEXT_BASE		0x35000000
+
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM_1			0x00000000
+
+/* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
+#define PHYS_SDRAM_1_SIZE		0x3f000000
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
+
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x80000)
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		19000000
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE			0xf6801000
+#define GICC_BASE			0xf6802000
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (8 << 20))
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+
+#define CONFIG_PL011_CLOCK		19200000
+#define CONFIG_PL01x_PORTS		{(void *)0xF8015000}
+#define CONFIG_CONS_INDEX		0
+
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_DWC2
+#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
+/*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
+#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
+
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MISC_INIT_R
+#endif
+
+#define CONFIG_HIKEY_GPIO
+#define CONFIG_DM_GPIO
+#define CONFIG_CMD_GPIO
+#define CONFIG_DM
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_DWMMC
+#define CONFIG_HIKEY_DWMMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_MMC
+
+#define CONFIG_FS_EXT4
+
+/* Command line configuration */
+#define CONFIG_MENU
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_UNZIP
+#define CONFIG_CMD_ENV
+
+#define CONFIG_MTD_PARTITIONS
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+#include <config_distro_defaults.h>
+
+/* Initial environment variables */
+
+/*
+ * Defines where the kernel and FDT will be put in RAM
+ */
+
+/* Assume we boot with root on the seventh partition of eMMC */
+#define CONFIG_BOOTARGS	"console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw"
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(USB, usb, 0) \
+	func(MMC, mmc, 1) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+				"kernel_name=Image\0"	\
+				"kernel_addr_r=0x00080000\0" \
+				"fdt_name=hi6220-hikey.dtb\0" \
+				"fdt_addr_r=0x02000000\0" \
+				"fdt_high=0xffffffffffffffff\0" \
+				"initrd_high=0xffffffffffffffff\0" \
+				BOOTENV
+
+
+/* Preserve enviroment on sd card */
+#define CONFIG_COMMAND_HISTORY
+
+#define CONFIG_ENV_SIZE			0x1000
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE               "mmc"
+#define FAT_ENV_DEVICE_AND_PART         "1:1"
+#define FAT_ENV_FILE                    "uboot.env"
+#define CONFIG_FAT_WRITE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_MAXARGS		64	/* max command args */
+
+#define CONFIG_SYS_NO_FLASH
+
+#endif /* __HIKEY_H */