rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 109 insertions, 109 deletions

diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h
index 10ff7ab40ed..d19a787e928 100644
--- a/include/configs/sbc8240.h
+++ b/include/configs/sbc8240.h
@@ -45,7 +45,7 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_PREBOOT  "echo;echo Welcome to U-Boot for the sbc8240;echo;echo Type \"? or help\" to get on-line help;echo"
 
@@ -106,15 +106,15 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 #if 1
-#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
 #endif
-#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2	"> "
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #define CONFIG_ETHADDR          DE:AD:BE:EF:01:01    /* Ethernet address */
@@ -126,7 +126,7 @@
 #define CONFIG_BOARD_SPECIFIC_LED       /* version has board specific leds */
 
 #define STATUS_LED_BIT          0x00000001
-#define STATUS_LED_PERIOD       (CFG_HZ / 2)
+#define STATUS_LED_PERIOD       (CONFIG_SYS_HZ / 2)
 #define STATUS_LED_STATE        STATUS_LED_BLINKING
 #define STATUS_LED_ACTIVE       0       /* LED on for bit == 0  */
 #define STATUS_LED_BOOT         0       /* LED 0 used for boot status */
@@ -137,15 +137,15 @@ typedef unsigned int led_id_t;
 
 #define __led_toggle(_msk) \
 	do { \
-		*((volatile char *) (CFG_LED_BASE)) ^= (_msk); \
+		*((volatile char *) (CONFIG_SYS_LED_BASE)) ^= (_msk); \
 	} while(0)
 
 #define __led_set(_msk, _st) \
 	do { \
 		if ((_st)) \
-			*((volatile char *) (CFG_LED_BASE)) |= (_msk); \
+			*((volatile char *) (CONFIG_SYS_LED_BASE)) |= (_msk); \
 		else \
-			*((volatile char *) (CFG_LED_BASE)) &= ~(_msk); \
+			*((volatile char *) (CONFIG_SYS_LED_BASE)) &= ~(_msk); \
 	} while(0)
 
 #define __led_init(msk, st) __led_set(msk, st)
@@ -153,44 +153,44 @@ typedef unsigned int led_id_t;
 #endif
 
 #define CONFIG_MISC_INIT_R
-#define CFG_LED_BASE	0xFFE80000
+#define CONFIG_SYS_LED_BASE	0xFFE80000
 
 /* Print Buffer Size
  */
-#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
-#define CFG_FLASH_BASE	    0xFFF00000
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_FLASH_BASE	    0xFFF00000
 
-#define CFG_RESET_ADDRESS   0xFFF00100
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
 
-#define CFG_EUMB_ADDR	    0xFCE00000
+#define CONFIG_SYS_EUMB_ADDR	    0xFCE00000
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
 
-#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
 
-#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
+#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
 
 	/* Maximum amount of RAM.
 	 */
-#define CFG_MAX_RAM_SIZE    0x10000000
+#define CONFIG_SYS_MAX_RAM_SIZE    0x10000000
 
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-#undef CFG_RAMBOOT
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
 #else
-#define CFG_RAMBOOT
+#define CONFIG_SYS_RAMBOOT
 #endif
 
 /*-----------------------------------------------------------------------
@@ -199,23 +199,23 @@ typedef unsigned int led_id_t;
 
 	/* Size in bytes reserved for initial data
 	 */
-#define CFG_GBL_DATA_SIZE    128
+#define CONFIG_SYS_GBL_DATA_SIZE    128
 
-#define CFG_INIT_RAM_ADDR     0x40000000
-#define CFG_INIT_RAM_END      0x1000
-#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 
 /*
  * NS16550 Configuration
  */
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
 
-#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		3686400
+#define CONFIG_SYS_NS16550_CLK		3686400
 
-#define CFG_NS16550_COM1	0xFFF80000
+#define CONFIG_SYS_NS16550_COM1	0xFFF80000
 
 /*
  * Low Level Configuration Settings
@@ -225,36 +225,36 @@ typedef unsigned int led_id_t;
  */
 
 #define CONFIG_SYS_CLK_FREQ  33000000
-#define CFG_HZ		     1000
+#define CONFIG_SYS_HZ		     1000
 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
 
 	/* Bit-field values for MCCR1.
 	 */
-#define CFG_ROMNAL	    0
-#define CFG_ROMFAL	    7
+#define CONFIG_SYS_ROMNAL	    0
+#define CONFIG_SYS_ROMFAL	    7
 
 	/* Bit-field values for MCCR2.
 	 */
-#define CFG_REFINT	    430	    /* Refresh interval			*/
+#define CONFIG_SYS_REFINT	    430	    /* Refresh interval			*/
 
 	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
 	 */
-#define CFG_BSTOPRE	    192
+#define CONFIG_SYS_BSTOPRE	    192
 
 	/* Bit-field values for MCCR3.
 	 */
-#define CFG_REFREC	    2	    /* Refresh to activate interval	*/
-#define CFG_RDLAT	    3	    /* Data latancy from read command	*/
+#define CONFIG_SYS_REFREC	    2	    /* Refresh to activate interval	*/
+#define CONFIG_SYS_RDLAT	    3	    /* Data latancy from read command	*/
 
 	/* Bit-field values for MCCR4.
 	 */
-#define CFG_PRETOACT	    2	    /* Precharge to activate interval	*/
-#define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval	*/
-#define CFG_SDMODE_CAS_LAT  2	    /* SDMODE CAS latancy		*/
-#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type			*/
-#define CFG_SDMODE_BURSTLEN 2	    /* SDMODE Burst length		*/
-#define CFG_ACTORW	    2
-#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_PRETOACT	    2	    /* Precharge to activate interval	*/
+#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval	*/
+#define CONFIG_SYS_SDMODE_CAS_LAT  2	    /* SDMODE CAS latancy		*/
+#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type			*/
+#define CONFIG_SYS_SDMODE_BURSTLEN 2	    /* SDMODE Burst length		*/
+#define CONFIG_SYS_ACTORW	    2
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
 
 /* Memory bank settings.
  * Only bits 20-29 are actually used from these vales to set the
@@ -263,69 +263,69 @@ typedef unsigned int led_id_t;
  * address. Refer to the MPC8240 book.
  */
 
-#define CFG_BANK0_START	    0x00000000
-#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE    1
-#define CFG_BANK1_START	    0x3ff00000
-#define CFG_BANK1_END	    0x3fffffff
-#define CFG_BANK1_ENABLE    0
-#define CFG_BANK2_START	    0x3ff00000
-#define CFG_BANK2_END	    0x3fffffff
-#define CFG_BANK2_ENABLE    0
-#define CFG_BANK3_START	    0x3ff00000
-#define CFG_BANK3_END	    0x3fffffff
-#define CFG_BANK3_ENABLE    0
-#define CFG_BANK4_START	    0x3ff00000
-#define CFG_BANK4_END	    0x3fffffff
-#define CFG_BANK4_ENABLE    0
-#define CFG_BANK5_START	    0x3ff00000
-#define CFG_BANK5_END	    0x3fffffff
-#define CFG_BANK5_ENABLE    0
-#define CFG_BANK6_START	    0x3ff00000
-#define CFG_BANK6_END	    0x3fffffff
-#define CFG_BANK6_ENABLE    0
-#define CFG_BANK7_START	    0x3ff00000
-#define CFG_BANK7_END	    0x3fffffff
-#define CFG_BANK7_ENABLE    0
-
-#define CFG_ODCR	    0xff
-
-#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CFG_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
-
-#define CFG_DBAT0L  CFG_IBAT0L
-#define CFG_DBAT0U  CFG_IBAT0U
-#define CFG_DBAT1L  CFG_IBAT1L
-#define CFG_DBAT1U  CFG_IBAT1U
-#define CFG_DBAT2L  CFG_IBAT2L
-#define CFG_DBAT2U  CFG_IBAT2U
-#define CFG_DBAT3L  CFG_IBAT3L
-#define CFG_DBAT3U  CFG_IBAT3U
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START	    0x3ff00000
+#define CONFIG_SYS_BANK1_END	    0x3fffffff
+#define CONFIG_SYS_BANK1_ENABLE    0
+#define CONFIG_SYS_BANK2_START	    0x3ff00000
+#define CONFIG_SYS_BANK2_END	    0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START	    0x3ff00000
+#define CONFIG_SYS_BANK3_END	    0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START	    0x3ff00000
+#define CONFIG_SYS_BANK4_END	    0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START	    0x3ff00000
+#define CONFIG_SYS_BANK5_END	    0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START	    0x3ff00000
+#define CONFIG_SYS_BANK6_END	    0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START	    0x3ff00000
+#define CONFIG_SYS_BANK7_END	    0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+#define CONFIG_SYS_ODCR	    0xff
+
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* Max number of sectors in one bank	*/
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	256	/* Max number of sectors in one bank	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
 /*
  * Init Memory Controller:
@@ -333,7 +333,7 @@ typedef unsigned int led_id_t;
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM      CFG_FLASH_BASE  /* FLASH bank #0        */
+#define FLASH_BASE0_PRELIM      CONFIG_SYS_FLASH_BASE  /* FLASH bank #0        */
 #define FLASH_BASE1_PRELIM      0               /* FLASH bank #1        */
 
 	/* Warining: environment is not EMBEDDED in the U-Boot code.
@@ -348,9 +348,9 @@ typedef unsigned int led_id_t;
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_CACHELINE_SIZE	32
+#define CONFIG_SYS_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
@@ -370,5 +370,5 @@ typedef unsigned int led_id_t;
 #define CONFIG_NET_MULTI		/* Multi ethernet cards support */
 #define CONFIG_TULIP
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8       /* use 8 rx buffer on eepro100  */
+#define CONFIG_SYS_RX_ETH_BUFFER	8       /* use 8 rx buffer on eepro100  */
 #endif /* __CONFIG_H */