sunxi: add fdtoverlay_addr_r environment variable

Commit 69076dff2284 ("cmd: pxe: add support for FDT overlays") added
support for loading DT overlay files to PXE boot. However, it needs
additional environment variable which points to memory location which
can be used to temporary store overlay data.

Add it and in the process unify alignment using spaces and fix comment.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

1 files changed, 26 insertions, 23 deletions

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 33a4d7b6373..d81c0f43e1f 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -62,7 +62,7 @@
 #define SDRAM_OFFSET(x) 0x2##x
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* default load address */
-/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
+/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
 #define CONFIG_SPL_STACK_R_ADDR		0x2fe00000
@@ -72,7 +72,7 @@
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define CONFIG_SYS_LOAD_ADDR		0x42000000 /* default load address */
 /* V3s do not have enough memory to place code at 0x4a000000 */
-/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
+/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
 #define CONFIG_SPL_STACK_R_ADDR		0x4fe00000
@@ -240,40 +240,42 @@ extern int soft_i2c_gpio_scl;
  * There is no compression for arm64 kernels (yet), so leave some space
  * for really big kernels, say 256MB for now.
  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
- * Align the initrd to a 2MB page.
  */
-#define BOOTM_SIZE	__stringify(0xa000000)
-#define KERNEL_ADDR_R	__stringify(SDRAM_OFFSET(0080000))
-#define FDT_ADDR_R	__stringify(SDRAM_OFFSET(FA00000))
-#define SCRIPT_ADDR_R	__stringify(SDRAM_OFFSET(FC00000))
-#define PXEFILE_ADDR_R	__stringify(SDRAM_OFFSET(FD00000))
-#define RAMDISK_ADDR_R	__stringify(SDRAM_OFFSET(FE00000))
+#define BOOTM_SIZE        __stringify(0xa000000)
+#define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(0080000))
+#define FDT_ADDR_R        __stringify(SDRAM_OFFSET(FA00000))
+#define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(FC00000))
+#define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(FD00000))
+#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(FE00000))
+#define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(FF00000))
 
 #else
 /*
  * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc.
  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
- * 1M script, 1M pxe and the ramdisk at the end.
+ * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
  */
 #ifndef CONFIG_MACH_SUN8I_V3S
-#define BOOTM_SIZE     __stringify(0xa000000)
-#define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
-#define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
-#define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
-#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
-#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
+#define BOOTM_SIZE        __stringify(0xa000000)
+#define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(2000000))
+#define FDT_ADDR_R        __stringify(SDRAM_OFFSET(3000000))
+#define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(3100000))
+#define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(3200000))
+#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(3300000))
+#define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(3400000))
 #else
 /*
  * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
  * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
- * 1M script, 1M pxe and the ramdisk at the end.
+ * 1M script, 1M pxe, 1M dt overlay and the ramdisk at the end.
  */
-#define BOOTM_SIZE     __stringify(0x2e00000)
-#define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
-#define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
-#define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
-#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
-#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
+#define BOOTM_SIZE        __stringify(0x2e00000)
+#define KERNEL_ADDR_R     __stringify(SDRAM_OFFSET(1000000))
+#define FDT_ADDR_R        __stringify(SDRAM_OFFSET(1800000))
+#define SCRIPT_ADDR_R     __stringify(SDRAM_OFFSET(1900000))
+#define PXEFILE_ADDR_R    __stringify(SDRAM_OFFSET(1A00000))
+#define FDTOVERLAY_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
+#define RAMDISK_ADDR_R    __stringify(SDRAM_OFFSET(1C00000))
 #endif
 #endif
 
@@ -283,6 +285,7 @@ extern int soft_i2c_gpio_scl;
 	"fdt_addr_r=" FDT_ADDR_R "\0" \
 	"scriptaddr=" SCRIPT_ADDR_R "\0" \
 	"pxefile_addr_r=" PXEFILE_ADDR_R "\0" \
+	"fdtoverlay_addr_r=" FDTOVERLAY_ADDR_R "\0" \
 	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0"
 
 #define DFU_ALT_INFO_RAM \