nokia_rx51: Remove platform

This platform is behind on migrations (it is the sole user of the oldest
legacy version of the USB gadget stack and is long overdue for
migration) and with Pali no longer being a maintainer, we remove this
platform.

Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 174 deletions

diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
deleted file mode 100644
index 54eea322dd3..00000000000
--- a/include/configs/nokia_rx51.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011-2012
- * Pali Rohár <pali@kernel.org>
- *
- * (C) Copyright 2010
- * Alistair Buxton <a.j.buxton@gmail.com>
- *
- * Derived from Beagle Board code:
- * (C) Copyright 2006-2008
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <x0khasim@ti.com>
- *
- * Configuration settings for the Nokia RX-51 aka N900.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-
-#include <asm/arch/cpu.h>		/* get chip and board defs */
-#include <asm/arch/omap.h>
-#include <asm/arch/mem.h>
-#include <linux/stringify.h>
-
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK		48000000		/* 48MHz (APLL96/2) */
-
-#define CFG_SYS_NS16550_CLK		V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CFG_SYS_NS16550_COM3		OMAP34XX_UART3
-
-#define CFG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
-
-#define GPIO_SLIDE			71
-
-/*
- * Board ONENAND Info.
- */
-
-#define CFG_SYS_ONENAND_BASE		ONENAND_MAP
-
-/* Environment information */
-#define CFG_EXTRA_ENV_SETTINGS \
-	"usbtty=cdc_acm\0" \
-	"stdin=usbtty,serial,keyboard\0" \
-	"stdout=usbtty,serial,vidconsole\0" \
-	"stderr=usbtty,serial,vidconsole\0" \
-	"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
-	"switchmmc=mmc dev ${mmcnum}\0" \
-	"kernaddr=0x82008000\0" \
-	"initrdaddr=0x84008000\0" \
-	"scriptaddr=0x86008000\0" \
-	"fileloadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
-		"${fileloadaddr} ${mmcfile}\0" \
-	"kernload=setenv fileloadaddr ${kernaddr};" \
-		"setenv mmcfile ${mmckernfile};" \
-		"run fileload\0" \
-	"initrdload=setenv fileloadaddr ${initrdaddr};" \
-		"setenv mmcfile ${mmcinitrdfile};" \
-		"run fileload\0" \
-	"scriptload=setenv fileloadaddr ${scriptaddr};" \
-		"setenv mmcfile ${mmcscriptfile};" \
-		"run fileload\0" \
-	"scriptboot=echo Running ${mmcscriptfile} from mmc " \
-		"${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
-	"kernboot=echo Booting ${mmckernfile} from mmc " \
-		"${mmcnum}:${mmcpart} ...; bootm ${kernaddr} || " \
-			"bootz ${kernaddr}\0" \
-	"kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
-		"${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr} || " \
-			"bootz ${kernaddr} ${initrdaddr}\0" \
-	"attachboot=echo Booting attached kernel image ...;" \
-		"setenv setup_omap_atag 1;" \
-		"bootm ${attkernaddr} || bootz ${attkernaddr};" \
-		"setenv setup_omap_atag\0" \
-	"trymmcscriptboot=run switchmmc && run scriptload && run scriptboot\0" \
-	"trymmckernboot=run switchmmc && run kernload && run kernboot\0" \
-	"trymmckerninitrdboot=run switchmmc && run initrdload && " \
-		"run kernload && run kerninitrdboot\0" \
-	"trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
-		"setenv mmckernfile uImage; run trymmckernboot;" \
-		"setenv mmckernfile zImage; run trymmckernboot\0" \
-	"trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
-		"setenv mmcpart 2; run trymmcpartboot;" \
-		"setenv mmcpart 3; run trymmcpartboot;" \
-		"setenv mmcpart 4; run trymmcpartboot\0" \
-	"trymmcboot=if run switchmmc; then " \
-			"setenv mmctype fat;" \
-			"run trymmcallpartboot;" \
-			"setenv mmctype ext4;" \
-			"run trymmcallpartboot;" \
-		"fi\0" \
-	"emmcboot=setenv mmcnum 1; run trymmcboot\0" \
-	"sdboot=setenv mmcnum 0; run trymmcboot\0" \
-	"trymmcbootmenu=setenv mmctype fat && run trymmcscriptboot || " \
-		"setenv mmctype ext4 && run trymmcscriptboot\0" \
-	"preboot=setenv mmcpart 1; setenv mmcscriptfile bootmenu.scr;" \
-		"setenv mmcnum 0 && run trymmcbootmenu || " \
-		"setenv mmcnum 1 && run trymmcbootmenu;" \
-		"if run slide; then true; else " \
-			"setenv bootmenu_delay 0;" \
-			"setenv bootdelay 0;" \
-		"fi\0" \
-	"menucmd=bootmenu\0" \
-	"bootmenu_0=Attached kernel=run attachboot\0" \
-	"bootmenu_1=Internal eMMC=run emmcboot\0" \
-	"bootmenu_2=External SD card=run sdboot\0" \
-	"bootmenu_3=U-Boot boot order=boot\0" \
-	"bootmenu_delay=30\0" \
-	""
-
-#define CFG_POSTBOOTMENU \
-	"echo;" \
-	"echo Extra commands:;" \
-	"echo run sdboot - Boot from SD card slot.;" \
-	"echo run emmcboot - Boot internal eMMC memory.;" \
-	"echo run attachboot - Boot attached kernel image.;" \
-	"echo"
-
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CFG_SYS_TIMERBASE		(OMAP34XX_GPT2)
-
-/*
- * Physical Memory Map
- */
-#define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
-
-/*
- * FLASH and environment organization
- */
-
-#define CFG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CFG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CFG_SYS_INIT_RAM_SIZE	0x800
-
-/*
- * Attached kernel image
- */
-
-#define SDRAM_SIZE			0x10000000	/* 256 MB */
-#define SDRAM_END			(CFG_SYS_SDRAM_BASE + SDRAM_SIZE)
-
-#define IMAGE_MAXSIZE			0x1FF800	/* 2 MB - 2 kB */
-#define KERNEL_OFFSET			0x40000		/* 256 kB */
-#define KERNEL_MAXSIZE			(IMAGE_MAXSIZE-KERNEL_OFFSET)
-#define KERNEL_ADDRESS			(SDRAM_END-KERNEL_MAXSIZE)
-
-/* Reserve protected RAM for attached kernel */
-#define CFG_PRAM			((KERNEL_MAXSIZE >> 10)+1)
-
-#endif /* __CONFIG_H */