diff options
| author | Daniel Schwierzeck | 2021-04-21 21:13:13 +0200 |
|---|---|---|
| committer | Daniel Schwierzeck | 2021-05-25 15:35:06 +0200 |
| commit | 5308a71db80ede9f0e0b5c727ae26469ab7914c8 (patch) | |
| tree | 161dd91242a152213ad798d7d57fa01a69f9a26f /include/configs | |
| parent | 9c8e58ac2362a155dd79cd7befafa57e648bfb9c (diff) | |
MIPS: remove deprecated qemu_mips board
Remove qemu_mips boards because DM migration doesn't make sense.
The board support for qemu_mips is already marked as deprecated
in Qemu in favour of the Malta board. Also qemu_mips support
has been removed from Linux a long time ago.
The official replacement is the Malta board. The same Malta U-Boot
image can be used with Qemu and on physical hardware.
All combinations of Big Endian and Little Endian as well as 32 bit
and 64 bit are supported.
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/qemu-mips.h | 89 | ||||
| -rw-r--r-- | include/configs/qemu-mips64.h | 89 |
2 files changed, 0 insertions, 178 deletions
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h deleted file mode 100644 index 5e787d7209e..00000000000 --- a/include/configs/qemu-mips.h +++ /dev/null @@ -1,89 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -/* - * This file contains the configuration parameters for qemu-mips target. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_QEMU_MIPS - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "addmisc=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate} " \ - "panic=1\0" \ - "bootfile=/tftpboot/vmlinux\0" \ - "load=tftp 80500000 ${u-boot}\0" \ - "" - -#define CONFIG_BOOTCOMMAND "bootp;bootelf" - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -#define CONFIG_DRIVER_NE2000 -#define CONFIG_DRIVER_NE2000_BASE 0xb4000300 - -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 115200 -#define CONFIG_SYS_NS16550_COM1 0xb40003f8 - -#ifdef CONFIG_SYS_BIG_ENDIAN -#define CONFIG_IDE_SWAP_IO -#endif - -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 0 -#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 - -#define CONFIG_SYS_IDE_MAXDEVICE 4 - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_MALLOC_LEN (256 << 10) - -#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 - -#define CONFIG_SYS_MHZ 132 - -#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) - -/* Cached addr */ -#define CONFIG_SYS_SDRAM_BASE 0x80000000 - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x81000000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - -/* We boot from this flash, selected with dip switch */ -#define CONFIG_SYS_FLASH_BASE 0xbfc00000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 128 - -/* Address and size of Primary Environment Sector */ - -#define MEM_SIZE 128 - -#endif /* __CONFIG_H */ diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h deleted file mode 100644 index 0ed00bc88f9..00000000000 --- a/include/configs/qemu-mips64.h +++ /dev/null @@ -1,89 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -/* - * This file contains the configuration parameters for qemu-mips64 target. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_QEMU_MIPS - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "addmisc=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate} " \ - "panic=1\0" \ - "bootfile=/tftpboot/vmlinux\0" \ - "load=tftp ffffffff80500000 ${u-boot}\0" \ - "" - -#define CONFIG_BOOTCOMMAND "bootp;bootelf" - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -#define CONFIG_DRIVER_NE2000 -#define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300 - -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 115200 -#define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8 - -#ifdef CONFIG_SYS_BIG_ENDIAN -#define CONFIG_IDE_SWAP_IO -#endif - -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 0 -#define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000 - -#define CONFIG_SYS_IDE_MAXDEVICE 4 - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_MALLOC_LEN (256 << 10) - -#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 - -#define CONFIG_SYS_MHZ 132 - -#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) - -/* Cached addr */ -#define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - -/* We boot from this flash, selected with dip switch */ -#define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 128 - -/* Address and size of Primary Environment Sector */ - -#define MEM_SIZE 128 - -#endif /* __CONFIG_H */ |