net/phy: Add support for CS4315/CS4340 PHY

Add support for Cortina CS4315/CS4340 10G PHY.
- This driver loads CS43xx firmware from NOR/NAND/SPI/SD device
  to initialize Cortina PHY.
- Cortina PHY has non-standard offset of PHY ID registers, thus
  we define own get_phy_id() to override default get_phy_id().
- To define macro CONFIG_PHY_CORTINA will enable this driver.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

1 files changed, 75 insertions, 0 deletions

diff --git a/include/cortina.h b/include/cortina.h
new file mode 100644
index 00000000000..6cadd28811e
--- /dev/null
+++ b/include/cortina.h
@@ -0,0 +1,75 @@
+/*
+ * Cortina PHY drivers
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ *
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef _CORTINA_H_
+#define _CORTINA_H_
+
+#define VILLA_GLOBAL_CHIP_ID_LSB     0x000
+#define VILLA_GLOBAL_CHIP_ID_MSB     0x001
+#define VILLA_GLOBAL_BIST_CONTROL    0x002
+#define VILLA_GLOBAL_BIST_STATUS     0x003
+#define VILLA_GLOBAL_LINE_SOFT_RESET 0x007
+#define VILLA_GLOBAL_HOST_SOFT_RESET 0x008
+#define VILLA_GLOBAL_DWNLD_CHECKSUM_CTRL 0x00A
+#define VILLA_GLOBAL_DWNLD_CHECKSUM_STATUS 0x00B
+#define VILLA_GLOBAL_MSEQCLKCTRL 0x00E
+#define VILLA_MSEQ_OPTIONS       0x1D0
+#define VILLA_MSEQ_PC		 0x1D3
+#define VILLA_MSEQ_BANKSELECT    0x1DF
+#define VILLA_DSP_SDS_DSP_COEF_DFE0_SELECT     0x2DB
+#define VILLA_DSP_SDS_SERDES_SRX_DFE0_SELECT   0x36E
+#define VILLA_LINE_SDS_COMMON_SRX0_RX_LOOP_FILTER   0x403
+#define VILLA_LINE_SDS_COMMON_SRX0_RX_CPA	0x404
+#define VILLA_LINE_SDS_COMMON_SRX0_RX_CPB	0x405
+#define VILLA_DSP_SDS_SERDES_SRX_FFE_DELAY_CTRL	0x369
+#define VILLA_MSEQ_ENABLE_MSB	0x194
+#define VILLA_MSEQ_SPARE21_LSB	0x226
+#define VILLA_MSEQ_RESET_COUNT_LSB  0x1E0
+#define VILLA_MSEQ_SPARE12_MSB  0x215
+#define VILLA_MSEQ_SPARE2_LSB   0x200
+#define VILLA_MSEQ_SPARE7_LSB   0x20A
+#define VILLA_MSEQ_SPARE9_LSB   0x20E
+#define VILLA_MSEQ_SPARE3_LSB   0x202
+#define VILLA_MSEQ_SPARE3_MSB   0x203
+#define VILLA_MSEQ_SPARE8_LSB   0x20C
+#define VILLA_MSEQ_SPARE8_MSB   0x20D
+#define VILLA_MSEQ_COEF8_FFE0_LSB 0x1E2
+#define VILLA_MSEQ_COEF8_FFE1_LSB 0x1E4
+#define VILLA_MSEQ_COEF8_FFE2_LSB 0x1E6
+#define VILLA_MSEQ_COEF8_FFE3_LSB 0x1E8
+#define VILLA_MSEQ_COEF8_FFE4_LSB 0x1EA
+#define VILLA_MSEQ_COEF8_FFE5_LSB 0x1EC
+#define VILLA_MSEQ_COEF8_DFE0_LSB 0x1F0
+#define VILLA_MSEQ_COEF8_DFE0N_LSB 0x1EE
+#define VILLA_MSEQ_COEF8_DFE1_LSB  0x1F2
+#define VILLA_DSP_SDS_DSP_COEF_LARGE_LEAK 0x2E2
+#define VILLA_DSP_SDS_SERDES_SRX_DAC_ENABLEB_LSB 0x360
+#define VILLA_MSEQ_POWER_DOWN_LSB  0x198
+#define VILLA_MSEQ_POWER_DOWN_MSB  0x199
+#define VILLA_MSEQ_CAL_RX_SLICER   0x1B8
+#define VILLA_DSP_SDS_SERDES_SRX_DAC_BIAS_SELECT1_MSB 0x365
+#define VILLA_MSEQ_COEF_INIT_SEL  0x1AE
+#define VILLA_DSP_SDS_DSP_PRECODEDINITFFE21 0x26A
+#define VILLA_MSEQ_SERDES_PARAM_LSB 0x195
+#define VILLA_MSEQ_SPARE25_LSB	0x22E
+#define VILLA_MSEQ_SPARE23_LSB	0x22A
+#define VILLA_MSEQ_CAL_RX_DFE_EQ 0x1BA
+#define VILLA_GLOBAL_VILLA2_COMPATIBLE      0x030
+#define VILLA_HOST_SDS_COMMON_STX0_TX_OUTPUT_CTRLA  0x812
+#define VILLA_HOST_SDS_COMMON_STX0_TX_OUTPUT_CTRLB  0x813
+#define VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLA 0x427
+#define VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLB 0x428
+
+#define mseq_edc_bist_done (0x1<<0)
+#define mseq_edc_bist_fail (0x1<<8)
+
+struct cortina_reg_config {
+	unsigned short reg_addr;
+	unsigned short reg_value;
+};
+#endif