doc: replace @return by Return:

Sphinx expects Return: and not @return to indicate a return value.

find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

1 files changed, 21 insertions, 21 deletions

diff --git a/include/i2c.h b/include/i2c.h
index a35e99bf87e..22add0b5282 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -184,7 +184,7 @@ struct i2c_msg_list {
  * @buffer:	Place to put data
  * @len:	Number of bytes to read
  *
- * @return 0 on success, -ve on failure
+ * Return: 0 on success, -ve on failure
  */
 int dm_i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len);
 
@@ -198,7 +198,7 @@ int dm_i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len);
  * @buffer:	Buffer containing data to write
  * @len:	Number of bytes to write
  *
- * @return 0 on success, -ve on failure
+ * Return: 0 on success, -ve on failure
  */
 int dm_i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer,
 		 int len);
@@ -214,7 +214,7 @@ int dm_i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer,
  * @chip_addr:	7-bit address to probe (10-bit and others are not supported)
  * @chip_flags:	Flags for the probe (see enum dm_i2c_chip_flags)
  * @devp:	Returns the device found, or NULL if none
- * @return 0 if a chip was found at that address, -ve if not
+ * Return: 0 if a chip was found at that address, -ve if not
  */
 int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
 		 struct udevice **devp);
@@ -226,7 +226,7 @@ int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
  *
  * @dev:	Device to use for transfer
  * @addr:	Address to read from
- * @return value read, or -ve on error
+ * Return: value read, or -ve on error
  */
 int dm_i2c_reg_read(struct udevice *dev, uint offset);
 
@@ -238,7 +238,7 @@ int dm_i2c_reg_read(struct udevice *dev, uint offset);
  * @dev:	Device to use for transfer
  * @addr:	Address to write to
  * @val:	Value to write (normally a byte)
- * @return 0 on success, -ve on error
+ * Return: 0 on success, -ve on error
  */
 int dm_i2c_reg_write(struct udevice *dev, uint offset, unsigned int val);
 
@@ -252,7 +252,7 @@ int dm_i2c_reg_write(struct udevice *dev, uint offset, unsigned int val);
  * @offset:	Address for the R/W operation
  * @clr:	Bitmask of bits that should be cleared
  * @set:	Bitmask of bits that should be set
- * @return 0 on success, -ve on error
+ * Return: 0 on success, -ve on error
  */
 int dm_i2c_reg_clrset(struct udevice *dev, uint offset, u32 clr, u32 set);
 
@@ -265,7 +265,7 @@ int dm_i2c_reg_clrset(struct udevice *dev, uint offset, u32 clr, u32 set);
  * @dev:	Device to use for transfer
  * @msg:	List of messages to transfer
  * @nmsgs:	Number of messages to transfer
- * @return 0 on success, -ve on error
+ * Return: 0 on success, -ve on error
  */
 int dm_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs);
 
@@ -274,7 +274,7 @@ int dm_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs);
  *
  * @bus:	Bus to adjust
  * @speed:	Requested speed in Hz
- * @return 0 if OK, -EINVAL for invalid values
+ * Return: 0 if OK, -EINVAL for invalid values
  */
 int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed);
 
@@ -282,7 +282,7 @@ int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed);
  * dm_i2c_get_bus_speed() - get the speed of a bus
  *
  * @bus:	Bus to check
- * @return speed of selected I2C bus in Hz, -ve on error
+ * Return: speed of selected I2C bus in Hz, -ve on error
  */
 int dm_i2c_get_bus_speed(struct udevice *bus);
 
@@ -294,7 +294,7 @@ int dm_i2c_get_bus_speed(struct udevice *bus);
  *
  * @dev:	Chip to adjust
  * @flags:	New flags
- * @return 0 if OK, -EINVAL if value is unsupported, other -ve value on error
+ * Return: 0 if OK, -EINVAL if value is unsupported, other -ve value on error
  */
 int i2c_set_chip_flags(struct udevice *dev, uint flags);
 
@@ -303,7 +303,7 @@ int i2c_set_chip_flags(struct udevice *dev, uint flags);
  *
  * @dev:	Chip to check
  * @flagsp:	Place to put flags
- * @return 0 if OK, other -ve value on error
+ * Return: 0 if OK, other -ve value on error
  */
 int i2c_get_chip_flags(struct udevice *dev, uint *flagsp);
 
@@ -334,14 +334,14 @@ int i2c_get_chip_offset_len(struct udevice *dev);
  * function to set the bits that are valid to be used for offset overflow.
  *
  * @mask: The mask to be used for high offset bits within address
- * @return 0 if OK, other -ve value on error
+ * Return: 0 if OK, other -ve value on error
  */
 int i2c_set_chip_addr_offset_mask(struct udevice *dev, uint mask);
 
 /*
  * i2c_get_chip_addr_offset_mask() - get mask of address bits usable by offset
  *
- * @return current chip addr offset mask
+ * Return: current chip addr offset mask
  */
 uint i2c_get_chip_addr_offset_mask(struct udevice *dev);
 
@@ -351,7 +351,7 @@ uint i2c_get_chip_addr_offset_mask(struct udevice *dev);
  * See the deblock() method in 'struct dm_i2c_ops' for full information
  *
  * @bus:	Bus to recover
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
  */
 int i2c_deblock(struct udevice *bus);
 
@@ -366,7 +366,7 @@ int i2c_deblock(struct udevice *bus);
  * @scl_count:	Number of SCL clock cycles generated to deblock SDA
  * @start_count:Number of I2C start conditions sent after deblocking SDA
  * @delay:	Delay between SCL clock line changes
- * @return 0 if OK, -ve on error
+ * Return: 0 if OK, -ve on error
  */
 struct gpio_desc;
 int i2c_deblock_gpio_loop(struct gpio_desc *sda_pin, struct gpio_desc *scl_pin,
@@ -567,7 +567,7 @@ void i2c_dump_msgs(struct i2c_msg *msg, int nmsgs);
  *
  * @dev: Device to find an emulator for
  * @emulp: Returns the associated emulator, if found *
- * @return 0 if OK, -ENOENT or -ENODEV if not found
+ * Return: 0 if OK, -ENOENT or -ENODEV if not found
  */
 int i2c_emul_find(struct udevice *dev, struct udevice **emulp);
 
@@ -589,7 +589,7 @@ void i2c_emul_set_idx(struct udevice *dev, int emul_idx);
  * Given an emulator this returns the associated device
  *
  * @emul: Emulator for the device
- * @return device that @emul is emulating
+ * Return: device that @emul is emulating
  */
 struct udevice *i2c_emul_get_device(struct udevice *emul);
 
@@ -606,7 +606,7 @@ extern struct acpi_ops i2c_acpi_ops;
  * properties.
  *
  * @dev: I2C device to process
- * @return 0 if OK, -EINVAL if acpi,hid is not present
+ * Return: 0 if OK, -EINVAL if acpi,hid is not present
  */
 int acpi_i2c_of_to_plat(struct udevice *dev);
 
@@ -967,7 +967,7 @@ enum {
  * Get FDT values for i2c bus.
  *
  * @param blob  Device tree blbo
- * @return the number of I2C bus
+ * Return: the number of I2C bus
  */
 void board_i2c_init(const void *blob);
 
@@ -976,7 +976,7 @@ void board_i2c_init(const void *blob);
  *
  * @param blob  Device tree blbo
  * @param node  FDT I2C node to find
- * @return the number of I2C bus (zero based), or -1 on error
+ * Return: the number of I2C bus (zero based), or -1 on error
  */
 int i2c_get_bus_num_fdt(int node);
 
@@ -985,7 +985,7 @@ int i2c_get_bus_num_fdt(int node);
  *
  * @param blob  Device tree blbo
  * @param node  FDT I2C node to find
- * @return 0 if port was reset, -1 if not found
+ * Return: 0 if port was reset, -1 if not found
  */
 int i2c_reset_port_fdt(const void *blob, int node);