mtd: nand: Sync with Linux v4.6

Updates the NAND code to match Linux v4.6.  The previous sync was from
Linux v4.1 in commit d3963721d93fafa.

Note that none of the individual NAND drivers tracked Linux closely
enough to be synced themselves, other than manually applying a few
cross-tree changes.

Signed-off-by: Scott Wood <oss@buserror.net>
Tested-by: Heiko Schocher <hs@denx.de>

3 files changed, 49 insertions, 31 deletions

diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 9da77ec1441..cf20674549c 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -278,6 +278,11 @@ struct mtd_info {
 	int usecount;
 };
 
+static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
+{
+	return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
+}
+
 int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
 #ifndef __UBOOT__
 int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 34945fda702..b5a02c3382c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -25,6 +25,8 @@
 
 struct mtd_info;
 struct nand_flash_dev;
+struct device_node;
+
 /* Scan and identify a NAND device */
 extern int nand_scan(struct mtd_info *mtd, int max_chips);
 /*
@@ -144,6 +146,14 @@ typedef enum {
 /* Enable Hardware ECC before syndrome is read back from flash */
 #define NAND_ECC_READSYN	2
 
+/*
+ * Enable generic NAND 'page erased' check. This check is only done when
+ * ecc.correct() returns -EBADMSG.
+ * Set this flag if your implementation does not fix bitflips in erased
+ * pages and you want to rely on the default implementation.
+ */
+#define NAND_ECC_GENERIC_ERASED_CHECK	BIT(0)
+
 /* Bit mask for flags passed to do_nand_read_ecc */
 #define NAND_GET_DEVICE		0x80
 
@@ -179,6 +189,12 @@ typedef enum {
 /* Device supports subpage reads */
 #define NAND_SUBPAGE_READ	0x00001000
 
+/*
+ * Some MLC NANDs need data scrambling to limit bitflips caused by repeated
+ * patterns.
+ */
+#define NAND_NEED_SCRAMBLING	0x00002000
+
 /* Options valid for Samsung large page devices */
 #define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
 
@@ -203,6 +219,11 @@ typedef enum {
  * before calling nand_scan_tail.
  */
 #define NAND_BUSWIDTH_AUTO      0x00080000
+/*
+ * This option could be defined by controller drivers to protect against
+ * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers
+ */
+#define NAND_USE_BOUNCE_BUFFER	0x00100000
 
 /* Options set by nand scan */
 /* bbt has already been read */
@@ -292,15 +313,15 @@ struct nand_onfi_params {
 	__le16 t_r;
 	__le16 t_ccs;
 	__le16 src_sync_timing_mode;
-	__le16 src_ssync_features;
+	u8 src_ssync_features;
 	__le16 clk_pin_capacitance_typ;
 	__le16 io_pin_capacitance_typ;
 	__le16 input_pin_capacitance_typ;
 	u8 input_pin_capacitance_max;
 	u8 driver_strength_support;
 	__le16 t_int_r;
-	__le16 t_ald;
-	u8 reserved4[7];
+	__le16 t_adl;
+	u8 reserved4[8];
 
 	/* vendor */
 	__le16 vendor_revision;
@@ -423,7 +444,7 @@ struct nand_jedec_params {
 	__le16 input_pin_capacitance_typ;
 	__le16 clk_pin_capacitance_typ;
 	u8 driver_strength_support;
-	__le16 t_ald;
+	__le16 t_adl;
 	u8 reserved4[36];
 
 	/* ECC and endurance block */
@@ -466,12 +487,19 @@ struct nand_hw_control {
  * @total:	total number of ECC bytes per page
  * @prepad:	padding information for syndrome based ECC generators
  * @postpad:	padding information for syndrome based ECC generators
+ * @options:	ECC specific options (see NAND_ECC_XXX flags defined above)
  * @layout:	ECC layout control struct pointer
  * @priv:	pointer to private ECC control data
  * @hwctl:	function to control hardware ECC generator. Must only
  *		be provided if an hardware ECC is available
  * @calculate:	function for ECC calculation or readback from ECC hardware
- * @correct:	function for ECC correction, matching to ECC generator (sw/hw)
+ * @correct:	function for ECC correction, matching to ECC generator (sw/hw).
+ *		Should return a positive number representing the number of
+ *		corrected bitflips, -EBADMSG if the number of bitflips exceed
+ *		ECC strength, or any other error code if the error is not
+ *		directly related to correction.
+ *		If -EBADMSG is returned the input buffers should be left
+ *		untouched.
  * @read_page_raw:	function to read a raw page without ECC. This function
  *			should hide the specific layout used by the ECC
  *			controller and always return contiguous in-band and
@@ -509,6 +537,7 @@ struct nand_ecc_ctrl {
 	int strength;
 	int prepad;
 	int postpad;
+	unsigned int options;
 	struct nand_ecclayout	*layout;
 	void *priv;
 	void (*hwctl)(struct mtd_info *mtd, int mode);
@@ -556,6 +585,7 @@ struct nand_buffers {
 
 /**
  * struct nand_chip - NAND Private Flash Chip Data
+ * @mtd:		MTD device registered to the MTD framework
  * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the
  *			flash device
  * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the
@@ -571,10 +601,6 @@ struct nand_buffers {
  * @block_markbad:	[REPLACEABLE] mark a block bad
  * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific function for controlling
  *			ALE/CLE/nCE. Also used to write command and address
- * @init_size:		[BOARDSPECIFIC] hardwarespecific function for setting
- *			mtd->oobsize, mtd->writesize and so on.
- *			@id_data contains the 8 bytes values of NAND_CMD_READID.
- *			Return with the bus width.
  * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accessing
  *			device ready/busy line. If set to NULL no access to
  *			ready/busy is available and the ready/busy information
@@ -669,11 +695,9 @@ struct nand_chip {
 	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
 	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
 	void (*select_chip)(struct mtd_info *mtd, int chip);
-	int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
+	int (*block_bad)(struct mtd_info *mtd, loff_t ofs);
 	int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
 	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
-	int (*init_size)(struct mtd_info *mtd, struct nand_chip *this,
-			u8 *id_data);
 	int (*dev_ready)(struct mtd_info *mtd);
 	void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
 			int page_addr);
@@ -873,7 +897,6 @@ struct nand_manufacturers {
 extern struct nand_flash_dev nand_flash_ids[];
 extern struct nand_manufacturers nand_manuf_ids[];
 
-extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
 extern int nand_default_bbt(struct mtd_info *mtd);
 extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
 extern int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs);
@@ -898,7 +921,6 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
  * @chip_delay:		R/B delay value in us
  * @options:		Option flags, e.g. 16bit buswidth
  * @bbt_options:	BBT option flags, e.g. NAND_BBT_USE_FLASH
- * @ecclayout:		ECC layout info structure
  * @part_probe_types:	NULL-terminated array of probe types
  */
 struct platform_nand_chip {
@@ -906,7 +928,6 @@ struct platform_nand_chip {
 	int chip_offset;
 	int nr_partitions;
 	struct mtd_partition *partitions;
-	struct nand_ecclayout *ecclayout;
 	int chip_delay;
 	unsigned int options;
 	unsigned int bbt_options;
@@ -955,15 +976,6 @@ struct platform_nand_data {
 	struct platform_nand_ctrl ctrl;
 };
 
-/* Some helpers to access the data structures */
-static inline
-struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	return chip->priv;
-}
-
 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION
 /* return the supported features. */
 static inline int onfi_feature(struct nand_chip *chip)
@@ -1081,4 +1093,9 @@ struct nand_sdr_timings {
 
 /* get timing characteristics from ONFI timing mode. */
 const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
+
+int nand_check_erased_ecc_chunk(void *data, int datalen,
+				void *ecc, int ecclen,
+				void *extraoob, int extraooblen,
+				int threshold);
 #endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h
index d8754dd8c8e..8ea6b04cc3a 100644
--- a/include/linux/mtd/nand_bch.h
+++ b/include/linux/mtd/nand_bch.h
@@ -32,9 +32,7 @@ int nand_bch_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc,
 /*
  * Initialize BCH encoder/decoder
  */
-struct nand_bch_control *
-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
-	      unsigned int eccbytes, struct nand_ecclayout **ecclayout);
+struct nand_bch_control *nand_bch_init(struct mtd_info *mtd);
 /*
  * Release BCH encoder/decoder resources
  */
@@ -55,12 +53,10 @@ static inline int
 nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
 		      unsigned char *read_ecc, unsigned char *calc_ecc)
 {
-	return -1;
+	return -ENOTSUPP;
 }
 
-static inline struct nand_bch_control *
-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
-	      unsigned int eccbytes, struct nand_ecclayout **ecclayout)
+static inline struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 {
 	return NULL;
 }