usb: s3c-otg: Split private bits from s3c_udc.h

Most of the functions are local to the s3c_udc driver, remove them
from the s3c_udc.h header to stop those bits from propagating all
over the place. Instead, move all the private stuff into new private
s3c_udc_otg_priv.h header.

Signed-off-by: Marek Vasut <marex@denx.de>

1 files changed, 3 insertions, 91 deletions

diff --git a/include/usb/s3c_udc.h b/include/usb/s3c_udc.h
index f6c3a8693c4..67c3e9112dd 100644
--- a/include/usb/s3c_udc.h
+++ b/include/usb/s3c_udc.h
@@ -9,99 +9,8 @@
 #ifndef __S3C_USB_GADGET
 #define __S3C_USB_GADGET
 
-#include <asm/errno.h>
-#include <linux/sizes.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/list.h>
-#include <usb/lin_gadget_compat.h>
-
 #define PHY0_SLEEP              (1 << 5)
 
-/*-------------------------------------------------------------------------*/
-/* DMA bounce buffer size, 16K is enough even for mass storage */
-#define DMA_BUFFER_SIZE	(16*SZ_1K)
-
-#define EP0_FIFO_SIZE		64
-#define EP_FIFO_SIZE		512
-#define EP_FIFO_SIZE2		1024
-/* ep0-control, ep1in-bulk, ep2out-bulk, ep3in-int */
-#define S3C_MAX_ENDPOINTS	4
-#define S3C_MAX_HW_ENDPOINTS	16
-
-#define WAIT_FOR_SETUP          0
-#define DATA_STATE_XMIT         1
-#define DATA_STATE_NEED_ZLP     2
-#define WAIT_FOR_OUT_STATUS     3
-#define DATA_STATE_RECV         4
-#define WAIT_FOR_COMPLETE	5
-#define WAIT_FOR_OUT_COMPLETE	6
-#define WAIT_FOR_IN_COMPLETE	7
-#define WAIT_FOR_NULL_COMPLETE	8
-
-#define TEST_J_SEL		0x1
-#define TEST_K_SEL		0x2
-#define TEST_SE0_NAK_SEL	0x3
-#define TEST_PACKET_SEL		0x4
-#define TEST_FORCE_ENABLE_SEL	0x5
-
-/* ************************************************************************* */
-/* IO
- */
-
-enum ep_type {
-	ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
-};
-
-struct s3c_ep {
-	struct usb_ep ep;
-	struct dwc2_udc *dev;
-
-	const struct usb_endpoint_descriptor *desc;
-	struct list_head queue;
-	unsigned long pio_irqs;
-	int len;
-	void *dma_buf;
-
-	u8 stopped;
-	u8 bEndpointAddress;
-	u8 bmAttributes;
-
-	enum ep_type ep_type;
-	int fifo_num;
-};
-
-struct s3c_request {
-	struct usb_request req;
-	struct list_head queue;
-};
-
-struct dwc2_udc {
-	struct usb_gadget gadget;
-	struct usb_gadget_driver *driver;
-
-	struct s3c_plat_otg_data *pdata;
-
-	int ep0state;
-	struct s3c_ep ep[S3C_MAX_ENDPOINTS];
-
-	unsigned char usb_address;
-
-	unsigned req_pending:1, req_std:1;
-};
-
-extern struct dwc2_udc *the_controller;
-
-#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN) == USB_DIR_IN)
-#define ep_index(EP) ((EP)->bEndpointAddress&0xF)
-#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
-
-extern void otg_phy_init(struct dwc2_udc *dev);
-extern void otg_phy_off(struct dwc2_udc *dev);
-
-extern void s3c_udc_ep_set_stall(struct s3c_ep *ep);
-extern int s3c_udc_probe(struct s3c_plat_otg_data *pdata);
-
 struct s3c_plat_otg_data {
 	int		(*phy_control)(int on);
 	unsigned int	regs_phy;
@@ -110,4 +19,7 @@ struct s3c_plat_otg_data {
 	unsigned int    usb_flags;
 	unsigned int	usb_gusbcfg;
 };
+
+extern int s3c_udc_probe(struct s3c_plat_otg_data *pdata);
+
 #endif