include/configs: Use new CONFIG_CMD_* in various e* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

7 files changed, 131 insertions, 114 deletions

diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index a014c7c07f8..ac1ef959a70 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -58,17 +58,18 @@
 
 						    /*#define CONFIG_DRAM_SPEED	      66   */ /* MHz			     */
 
-#define CONFIG_COMMANDS		(   CONFIG_CMD_DFL  | \
-				    CFG_CMD_FLASH   | \
-				    CFG_CMD_SDRAM   | \
-				    CFG_CMD_I2C	    | \
-				    CFG_CMD_IDE	    | \
-				    CFG_CMD_FAT	    | \
-				    CFG_CMD_ENV	    | \
-				    CFG_CMD_PCI )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any)	*/
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_PCI
 
 
 /*-----------------------------------------------------------------------
@@ -398,7 +399,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 4a1385ccb92..d86a9efbefd 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -208,26 +208,29 @@
 
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DIAG	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NET	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_REGINFO	| \
-				CFG_CMD_SDRAM	| \
-				CFG_CMD_SNTP	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -236,7 +239,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -286,7 +289,7 @@
  */
 #define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
@@ -298,7 +301,7 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
index bdda6292ed7..12be15102f5 100644
--- a/include/configs/ep7312.h
+++ b/include/configs/ep7312.h
@@ -64,10 +64,14 @@
 
 #define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | CFG_CMD_JFFS2)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+
 
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS    	"devfs=mount root=ramfs console=ttyS0,9600"
@@ -78,7 +82,7 @@
 /*#define CONFIG_BOOTFILE	"impa7"	*/
 #define CONFIG_BOOTCOMMAND	"bootp;bootm"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index 04147a55d1d..44c4388b208 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -123,23 +123,25 @@
 
 #define CONFIG_BAUDRATE		38400
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL   \
-				| CFG_CMD_DHCP    \
-				| CFG_CMD_ECHO    \
-				| CFG_CMD_I2C     \
-				| CFG_CMD_IMMAP   \
-				| CFG_CMD_MII     \
-				| CFG_CMD_PING    \
-				)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
 
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND	"bootm FF860000"	/* autoboot command */
 #define CONFIG_BOOTARGS		"root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
@@ -157,7 +159,7 @@
 #define CFG_PROMPT_HUSH_PS2	"> "
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -183,7 +185,7 @@
 
 #define	CFG_DIRECT_FLASH_TFTP
 
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
 #define CFG_JFFS2_FIRST_BANK	0
 #define CFG_JFFS2_NUM_BANKS	CFG_MAX_FLASH_BANKS
 #define CFG_JFFS2_FIRST_SECTOR  0
@@ -192,7 +194,7 @@
 #define CFG_JFFS_CUSTOM_PART
 #endif /* CFG_CMD_JFFS2 */
 
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
 #define CFG_I2C_SPEED		100000	/* I2C speed			*/
 #define CFG_I2C_SLAVE		0x7F	/* I2C slave address		*/
@@ -240,7 +242,7 @@
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 68625193091..065f967e173 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -291,37 +291,39 @@
 #define CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2	"> "
 
-/* What U-Boot subsytems do you want enabled? */
+
 /*
-*/
-#define CONFIG_COMMANDS		( CFG_CMD_ALL     & \
-				  ~(	CFG_CMD_BMP	| \
-					CFG_CMD_BSP	| \
-					CFG_CMD_DCR	| \
-					CFG_CMD_DHCP	| \
-					CFG_CMD_DISPLAY	| \
-					CFG_CMD_DOC	| \
-					CFG_CMD_DTT	| \
-					CFG_CMD_EEPROM	| \
-					CFG_CMD_EXT2	| \
-					CFG_CMD_FDC	| \
-					CFG_CMD_FDOS	| \
-					CFG_CMD_HWFLOW	| \
-					CFG_CMD_IDE	| \
-					CFG_CMD_JFFS2	| \
-					CFG_CMD_KGDB	| \
-					CFG_CMD_MII	| \
-					CFG_CMD_MMC	| \
-					CFG_CMD_NAND	| \
-					CFG_CMD_PCI	| \
-					CFG_CMD_PCMCIA	| \
-					CFG_CMD_REISER	| \
-					CFG_CMD_SCSI	| \
-					CFG_CMD_SPI	| \
-					CFG_CMD_UNIVERSE| \
-					CFG_CMD_USB	| \
-					CFG_CMD_VFD	| \
-					CFG_CMD_XIMG	) )
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_DCR
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
 
 
 /* Where do the internal registers live? */
@@ -342,13 +344,10 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*
  * Miscellaneous configurable options
  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CBSIZE              1024       /* Console I/O Buffer Size      */
 #else
 #  define CFG_CBSIZE              256        /* Console I/O Buffer Size      */
@@ -496,7 +495,7 @@
  */
 #define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT     5     /* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index a77ccef63b9..5fa70164e94 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -108,22 +108,25 @@
 
 #define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL   \
-				| CFG_CMD_DHCP    \
-				| CFG_CMD_ECHO    \
-				| CFG_CMD_I2C     \
-				| CFG_CMD_IMMAP   \
-				| CFG_CMD_MII     \
-				| CFG_CMD_PING    \
-				| CFG_CMD_DATE    \
-				| CFG_CMD_DTT	  \
-				| CFG_CMD_EEPROM  \
-				| CFG_CMD_PCI	  \
-				| CFG_CMD_DIAG	  \
-				)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_DIAG
+
 
 #define CONFIG_ETHADDR		00:10:EC:00:88:65
 #define CONFIG_HAS_ETH1
@@ -138,7 +141,7 @@
 #define CONFIG_AUTO_COMPLETE	1
 #define	CONFIG_EXTRA_ENV_SETTINGS	"ethprime=FCC3 ETHERNET"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
 #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
@@ -156,7 +159,7 @@
 #define CFG_PROMPT_HUSH_PS2	"> "
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"ep82xxm=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -308,7 +311,7 @@
 
 #define	CFG_DIRECT_FLASH_TFTP
 
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
 #define CFG_JFFS2_FIRST_BANK	0
 #define CFG_JFFS2_NUM_BANKS	CFG_MAX_FLASH_BANKS
 #define CFG_JFFS2_FIRST_SECTOR  0
@@ -317,7 +320,7 @@
 #define CFG_JFFS_CUSTOM_PART
 #endif /* CFG_CMD_JFFS2 */
 
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
 #define CFG_I2C_SPEED		100000	/* I2C speed			*/
 #define CFG_I2C_SLAVE		0x7F	/* I2C slave address		*/
@@ -358,7 +361,7 @@
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
index 88c2c7437d0..42633bea144 100644
--- a/include/configs/evb4510.h
+++ b/include/configs/evb4510.h
@@ -74,10 +74,15 @@
 
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | CFG_CMD_PING)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+
+
 
 #define CONFIG_ETHADDR		00:40:95:36:35:33
 #define CONFIG_NETMASK		255.255.255.0
@@ -89,7 +94,7 @@
 #define CONFIG_BOOTCOMMAND	"tftp 100000 uImage"
 /* #define CONFIG_BOOTARGS    	"console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	19200		/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif