Merge branch 'master' of git://git.denx.de/u-boot-socfpga

12 files changed, 23 insertions, 144 deletions

diff --git a/include/configs/socfpga_arria10_socdk.h b/include/configs/socfpga_arria10_socdk.h
index 0f116fbf2d9..92630c5e6e3 100644
--- a/include/configs/socfpga_arria10_socdk.h
+++ b/include/configs/socfpga_arria10_socdk.h
@@ -19,12 +19,6 @@
 /* Memory configurations  */
 #define PHYS_SDRAM_1_SIZE		0x40000000
 
-/* Ethernet on SoC (EMAC) */
-
-/*
- * U-Boot environment configurations
- */
-
 /*
  * Serial / UART configurations
  */
diff --git a/include/configs/socfpga_arria5_socdk.h b/include/configs/socfpga_arria5_socdk.h
index 24fcdd8b5a3..af6137aeb16 100644
--- a/include/configs/socfpga_arria5_socdk.h
+++ b/include/configs/socfpga_arria5_socdk.h
@@ -14,8 +14,6 @@
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
-/* Ethernet on SoC (EMAC) */
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index f9e2cdc1b30..5eccb01d1d6 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -10,8 +10,6 @@
  */
 #define CONFIG_CLOCKS
 
-#define CONFIG_SYS_BOOTMAPSZ		(64 * 1024 * 1024)
-
 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
 /*
@@ -26,7 +24,13 @@
 #define CONFIG_SYS_INIT_RAM_SIZE	0x10000
 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFE00000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x40000 /* 256KB */
+/* SPL memory allocation configuration, this is for FAT implementation */
+#ifndef CONFIG_SYS_SPL_MALLOC_SIZE
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x10000
+#endif
+#define CONFIG_SYS_INIT_RAM_SIZE	(0x40000 - CONFIG_SYS_SPL_MALLOC_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE)
 #endif
 
 /*
@@ -38,12 +42,23 @@
 #if ((CONFIG_SYS_BOOTCOUNT_ADDR > CONFIG_SYS_INIT_RAM_ADDR) &&	\
      (CONFIG_SYS_BOOTCOUNT_ADDR < (CONFIG_SYS_INIT_RAM_ADDR +	\
 				   CONFIG_SYS_INIT_RAM_SIZE)))
-#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_BOOTCOUNT_ADDR
+#define CONFIG_SPL_STACK		CONFIG_SYS_BOOTCOUNT_ADDR
 #else
-#define CONFIG_SYS_INIT_SP_ADDR			\
+#define CONFIG_SPL_STACK			\
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
 #endif
 
+/*
+ * U-Boot stack setup: if SPL post-reloc uses DDR stack, use it in pre-reloc
+ * phase of U-Boot, too. This prevents overwriting SPL data if stack/heap usage
+ * in U-Boot pre-reloc is higher than in SPL.
+ */
+#if defined(CONFIG_SPL_STACK_R_ADDR) && CONFIG_SPL_STACK_R_ADDR
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SPL_STACK_R_ADDR
+#else
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SPL_STACK
+#endif
+
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
 /*
@@ -55,10 +70,6 @@
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 						/* Boot argument buffer size */
 
-#ifndef CONFIG_SYS_HOSTNAME
-#define CONFIG_SYS_HOSTNAME	CONFIG_SYS_BOARD
-#endif
-
 /*
  * Cache
  */
@@ -66,19 +77,6 @@
 #define CONFIG_SYS_PL310_BASE		SOCFPGA_MPUL2_ADDRESS
 
 /*
- * EPCS/EPCQx1 Serial Flash Controller
- */
-#ifdef CONFIG_ALTERA_SPI
-/*
- * The base address is configurable in QSys, each board must specify the
- * base address based on it's particular FPGA configuration. Please note
- * that the address here is incremented by  0x400  from the Base address
- * selected in QSys, since the SPI registers are at offset +0x400.
- * #define CONFIG_SYS_SPI_BASE		0xff240400
- */
-#endif
-
-/*
  * Ethernet on SoC (EMAC)
  */
 #ifdef CONFIG_CMD_NET
@@ -133,32 +131,6 @@
 #endif
 
 /*
- * I2C support
- */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_BASE		SOCFPGA_I2C0_ADDRESS
-#define CONFIG_SYS_I2C_BASE1		SOCFPGA_I2C1_ADDRESS
-#define CONFIG_SYS_I2C_BASE2		SOCFPGA_I2C2_ADDRESS
-#define CONFIG_SYS_I2C_BASE3		SOCFPGA_I2C3_ADDRESS
-/* Using standard mode which the speed up to 100Kb/s */
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SPEED1		100000
-#define CONFIG_SYS_I2C_SPEED2		100000
-#define CONFIG_SYS_I2C_SPEED3		100000
-/* Address of device when used as slave */
-#define CONFIG_SYS_I2C_SLAVE		0x02
-#define CONFIG_SYS_I2C_SLAVE1		0x02
-#define CONFIG_SYS_I2C_SLAVE2		0x02
-#define CONFIG_SYS_I2C_SLAVE3		0x02
-#ifndef __ASSEMBLY__
-/* Clock supplied to I2C controller in unit of MHz */
-unsigned int cm_get_l4_sp_clk_hz(void);
-#define IC_CLK				(cm_get_l4_sp_clk_hz() / 1000000)
-#endif
-#endif /* CONFIG_DM_I2C */
-
-/*
  * QSPI support
  */
 /* Enable multiple SPI NOR flash manufacturers */
@@ -172,15 +144,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #endif
 
 /*
- * Designware SPI support
- */
-
-/*
- * Serial Driver
- */
-#define CONFIG_SYS_NS16550_SERIAL
-
-/*
  * USB
  */
 
@@ -216,29 +179,15 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #endif
 
 /*
- * mtd partitioning for serial NOR flash
- *
- * device nor0 <ff705000.spi.0>, # parts = 6
- * #: name                size            offset          mask_flags
- * 0: u-boot              0x00100000      0x00000000      0
- * 1: env1                0x00040000      0x00100000      0
- * 2: env2                0x00040000      0x00140000      0
- * 3: UBI                 0x03e80000      0x00180000      0
- * 4: boot                0x00e80000      0x00180000      0
- * 5: rootfs              0x01000000      0x01000000      0
- *
- */
-
-/*
  * SPL
  *
  * SRAM Memory layout for gen 5:
  *
  * 0xFFFF_0000 ...... Start of SRAM
  * 0xFFFF_xxxx ...... Top of stack (grows down)
- * 0xFFFF_yyyy ...... Malloc area
- * 0xFFFF_zzzz ...... Global Data
- * 0xFFFF_FF00 ...... End of SRAM
+ * 0xFFFF_yyyy ...... Global Data
+ * 0xFFFF_zzzz ...... Malloc area
+ * 0xFFFF_FFFF ...... End of SRAM
  *
  * SRAM Memory layout for Arria 10:
  * 0xFFE0_0000 ...... Start of SRAM (bottom)
@@ -252,16 +201,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_INIT_RAM_SIZE
 #endif
 
-#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
-/* SPL memory allocation configuration, this is for FAT implementation */
-#ifndef CONFIG_SYS_SPL_MALLOC_START
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x00010000
-#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_INIT_RAM_SIZE - \
-					 CONFIG_SYS_SPL_MALLOC_SIZE + \
-					 CONFIG_SYS_INIT_RAM_ADDR)
-#endif
-#endif
-
 /* SPL SDMMC boot support */
 #ifdef CONFIG_SPL_MMC_SUPPORT
 #if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
@@ -292,15 +231,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #endif
 #endif
 
-/*
- * Stack setup
- */
-#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
-#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
-#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
-#define CONFIG_SPL_STACK		CONFIG_SYS_SPL_MALLOC_START
-#endif
-
 /* Extra Environment */
 #ifndef CONFIG_SPL_BUILD
 
diff --git a/include/configs/socfpga_cyclone5_socdk.h b/include/configs/socfpga_cyclone5_socdk.h
index 18da8496ef8..028db2a09ec 100644
--- a/include/configs/socfpga_cyclone5_socdk.h
+++ b/include/configs/socfpga_cyclone5_socdk.h
@@ -14,8 +14,6 @@
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
-/* Ethernet on SoC (EMAC) */
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h
index d3224d5bd31..21108e34475 100644
--- a/include/configs/socfpga_de0_nano_soc.h
+++ b/include/configs/socfpga_de0_nano_soc.h
@@ -14,8 +14,6 @@
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
-/* Ethernet on SoC (EMAC) */
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
diff --git a/include/configs/socfpga_de10_nano.h b/include/configs/socfpga_de10_nano.h
index 2fcabff8afb..d85f98fbd46 100644
--- a/include/configs/socfpga_de10_nano.h
+++ b/include/configs/socfpga_de10_nano.h
@@ -14,8 +14,6 @@
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
-/* Ethernet on SoC (EMAC) */
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
diff --git a/include/configs/socfpga_de1_soc.h b/include/configs/socfpga_de1_soc.h
index f37099c58f8..9919d292dc7 100644
--- a/include/configs/socfpga_de1_soc.h
+++ b/include/configs/socfpga_de1_soc.h
@@ -14,8 +14,6 @@
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
-/* Ethernet on SoC (EMAC) */
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
diff --git a/include/configs/socfpga_is1.h b/include/configs/socfpga_is1.h
index c233c208a53..c4da5947f32 100644
--- a/include/configs/socfpga_is1.h
+++ b/include/configs/socfpga_is1.h
@@ -19,8 +19,6 @@
 /* Ethernet on SoC (EMAC) */
 #if defined(CONFIG_CMD_NET)
 #define CONFIG_ARP_TIMEOUT		500UL
-
-/* PHY */
 #endif
 
 /* The rest of the configuration is shared */
diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h
index 3a7f354914a..972999949a0 100644
--- a/include/configs/socfpga_sockit.h
+++ b/include/configs/socfpga_sockit.h
@@ -14,8 +14,6 @@
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
-/* Ethernet on SoC (EMAC) */
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
diff --git a/include/configs/socfpga_socrates.h b/include/configs/socfpga_socrates.h
index f0d93478912..7faea150a9e 100644
--- a/include/configs/socfpga_socrates.h
+++ b/include/configs/socfpga_socrates.h
@@ -14,8 +14,6 @@
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
-/* Ethernet on SoC (EMAC) */
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h
index b6a98611c0e..3a8ccc30216 100644
--- a/include/configs/socfpga_sr1500.h
+++ b/include/configs/socfpga_sr1500.h
@@ -19,8 +19,6 @@
 /* The PHY is autodetected, so no MII PHY address is needed here */
 #define PHY_ANEG_TIMEOUT	8000
 
-/* Environment */
-
 /* Enable SPI NOR flash reset, needed for SPI booting */
 #define CONFIG_SPI_N25Q256A_RESET
 
@@ -36,15 +34,6 @@
 #define CONFIG_ENV_OFFSET	0x000e0000
 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
 
-/*
- * The QSPI NOR flash layout on SR1500:
- *
- * 0000.0000 - 0003.ffff: SPL (4 times)
- * 0004.0000 - 000d.ffff: U-Boot
- * 000e.0000 - 000e.ffff: env1
- * 000f.0000 - 000f.ffff: env2
- */
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h
index 5517ed722d4..29a92b91468 100644
--- a/include/configs/socfpga_vining_fpga.h
+++ b/include/configs/socfpga_vining_fpga.h
@@ -16,27 +16,9 @@
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
-/* I2C EEPROM */
-#ifdef CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_I2C_EEPROM_BUS		0
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
-#endif
-
-/*
- * Status LEDs:
- *   0 ... Top Green
- *   1 ... Top Red
- *   2 ... Bottom Green
- *   3 ... Bottom Red
- */
-
 /* Ethernet on SoC (EMAC) */
 #if defined(CONFIG_CMD_NET)
 #define CONFIG_BOOTP_SEND_HOSTNAME
-/* PHY */
 #endif
 
 /* Extra Environment */