imx: Add support for zmx25 board

zmx25 is a board based on imx25 SoC, 64 Megs of LPDDR, 32 Megs of NOR flash, an
optional NAND flash.

Signed-off-by: Matthias Weisser <weisserm@arcor.de>

1 files changed, 180 insertions, 0 deletions

diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
new file mode 100644
index 00000000000..374c88a0f4d
--- /dev/null
+++ b/include/configs/zmx25.h
@@ -0,0 +1,180 @@
+/*
+ * (c) 2011 Graf-Syteco, Matthias Weisser
+ * <weisserm@arcor.de>
+ *
+ * Configuation settings for the zmx25 board
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
+#define CONFIG_MX25
+#define CONFIG_MX25_CLK32		32768	/* OSC32K frequency */
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_TEXT_BASE		0xA0000000
+
+/*
+ * Environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"gs_fast_boot=setenv bootdelay 5\0" \
+	"gs_slow_boot=setenv bootdelay 10\0" \
+	"bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \
+		"fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \
+		"bootm 0x81000000; bootelf 0x81000000\0"
+
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define BOARD_LATE_INIT
+
+/*
+ * Compressions
+ */
+#define CONFIG_LZO
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * GPIO
+ */
+#define CONFIG_MXC_GPIO
+
+/*
+ * Serial
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX25_UART2
+#define CONFIG_CONS_INDEX	1	/* use UART2 for console */
+#define CONFIG_BAUDRATE		115200	/* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Ethernet
+ */
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_PHYADDR		0x00
+#define CONFIG_MII
+#define CONFIG_NET_MULTI
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_CACHE
+
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+/*
+ * Additional command
+ */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * USB
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
+#define CONFIG_USB_EHCI_MXC
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORT	2
+#define CONFIG_MXC_USB_PORTSC	0xC0000000
+#define CONFIG_MXC_USB_FLAGS	0
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SUPPORT_VFAT
+#endif /* CONFIG_CMD_USB */
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM		0x80000000	/* start address of LPDDRRAM */
+#define PHYS_SDRAM_SIZE		0x04000000	/* 64 megs */
+
+#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
+#define CONFIG_SYS_INIT_SP_ADDR	0x78020000	/* end of internal SRAM */
+
+/*
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_FLASH_BASE		0xA0000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x00040000)
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
+#define CONFIG_ENV_SIZE			(128 * 1024)
+
+/*
+ * CFI FLASH driver setup
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* ~10x faster */
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
+
+#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM + (512*1024))
+#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM + PHYS_SDRAM_SIZE)
+
+#define CONFIG_SYS_PROMPT	"zmx25> "
+#define CONFIG_SYS_CBSIZE	256
+#define CONFIG_SYS_MAXARGS	16
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
+				sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_PREBOOT  ""
+
+#define CONFIG_BOOTDELAY	5
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
+#define CONFIG_AUTOBOOT_DELAY_STR	"delaygs"
+#define CONFIG_AUTOBOOT_STOP_STR	"stopgs"
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(0x400000 - 0x8000)
+#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
+
+#endif	/* __CONFIG_H */