powerpc: ppc4xx: remove korat board support

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Larry Johnson <lrj@acm.org>

1 files changed, 0 insertions, 550 deletions

diff --git a/include/configs/korat.h b/include/configs/korat.h
deleted file mode 100644
index 5494a6007df..00000000000
--- a/include/configs/korat.h
+++ /dev/null
@@ -1,550 +0,0 @@
-/*
- * (C) Copyright 2007-2009
- * Larry Johnson, lrj@acm.org
- *
- * (C) Copyright 2006-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * korat.h - configuration for Korat board
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_440EPX		1	/* Specific PPC440EPx		*/
-#define CONFIG_SYS_CLK_FREQ	33333333
-
-#ifdef CONFIG_KORAT_PERMANENT
-#define CONFIG_SYS_TEXT_BASE	0xFFFA0000
-#else
-#define	CONFIG_SYS_TEXT_BASE	0xF7F60000
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
-#define CONFIG_MISC_INIT_R	1	/* Call misc_init_r		*/
-
-/*
- * Manufacturer's information serial EEPROM parameters
- */
-#define MAN_DATA_EEPROM_ADDR	0x53	/* EEPROM I2C address		*/
-#define MAN_INFO_FIELD		2
-#define MAN_INFO_LENGTH		9
-#define MAN_MAC_ADDR_FIELD	3
-#define MAN_MAC_ADDR_LENGTH	12
-
-/*
- * Base addresses -- Note these are effective addresses where the actual
- * resources get mapped (not physical addresses).
- */
-#define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 384 kiB for Monitor  */
-#define CONFIG_SYS_MALLOC_LEN		(256 * 1024) /* Reserve 256 kiB for malloc() */
-
-#define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
-#define CONFIG_SYS_FLASH0_SIZE		0x01000000
-#define CONFIG_SYS_FLASH0_ADDR		(-CONFIG_SYS_FLASH0_SIZE)
-#define CONFIG_SYS_FLASH1_TOP		0xF8000000
-#define CONFIG_SYS_FLASH1_MAX_SIZE	0x08000000
-#define CONFIG_SYS_FLASH1_ADDR		(CONFIG_SYS_FLASH1_TOP - CONFIG_SYS_FLASH1_MAX_SIZE)
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH1_ADDR	/* start of FLASH	*/
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_OCM_BASE		0xe0010000	/* ocm			*/
-#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_OCM_BASE
-#define CONFIG_SYS_PCI_BASE		0xe0000000	/* Internal PCI regs	*/
-#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
-#define CONFIG_SYS_PCI_MEMBASE2		(CONFIG_SYS_PCI_MEMBASE + 0x20000000)
-
-#define CONFIG_SYS_USB2D0_BASE		0xe0000100
-#define CONFIG_SYS_USB_DEVICE		0xe0000000
-#define CONFIG_SYS_USB_HOST		0xe0000400
-#define CONFIG_SYS_CPLD_BASE		0xc0000000
-
-/*
- * Initial RAM & stack pointer
- */
-/* 440EPx has 16KB of internal SRAM, so no need for D-Cache		*/
-#undef CONFIG_SYS_INIT_RAM_DCACHE
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM			*/
-#define CONFIG_SYS_INIT_RAM_SIZE	(4 << 10)
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_serial_clock()
-#define CONFIG_SYS_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_SYS_BAUDRATE_TABLE						\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-/*
- * Environment
- */
-#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environ vars	*/
-
-/*
- * FLASH related
- */
-#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	      */
-#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	      */
-#define CONFIG_FLASH_CFI_LEGACY		/* Allow hard-coded config for FLASH0 */
-
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH1_ADDR, CONFIG_SYS_FLASH0_ADDR }
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks	      */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* max number of sectors on one chip  */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)    */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)    */
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)   */
-#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection      */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO	      /* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash      */
-
-#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	      */
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH1_TOP - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector   */
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-/*
- * DDR SDRAM
- */
-#define CONFIG_DDR_DATA_EYE		/* use DDR2 optimization	*/
-#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup	*/
-#define CONFIG_ZERO_SDRAM		/* Zero SDRAM after setup	*/
-#define CONFIG_DDR_ECC			/* Use ECC when available	*/
-#define SPD_EEPROM_ADDRESS	{0x50}
-#define CONFIG_PROG_SDRAM_TLB
-#define CONFIG_SYS_MEM_TOP_HIDE	(4 << 10) /* don't use last 4 KiB as	*/
-					/* per 440EPx Errata CHIP_11	*/
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_PPC4XX
-#define CONFIG_SYS_I2C_PPC4XX_CH0
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
-#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
-
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_EEPROM_ADDR	(0xa8>>1)
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/* I2C RTC */
-#define CONFIG_RTC_M41T60	1
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68
-
-/* I2C SYSMON (LM73)							*/
-#define CONFIG_DTT_LM73		1	/* National Semi's LM73		*/
-#define CONFIG_DTT_SENSORS	{2}	/* Sensor addresses		*/
-#define CONFIG_SYS_DTT_MAX_TEMP	70
-#define CONFIG_SYS_DTT_MIN_TEMP	-30
-
-#define CONFIG_PREBOOT	"echo;"						\
-	"echo Type \\\"run flash_cf\\\" to mount from CompactFlash(R);" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-/* Setup some board specific values for the default environment variables */
-#define CONFIG_HOSTNAME		korat
-
-/* Note: kernel_addr and ramdisk_addr assume that FLASH1 is 64 MiB. */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"u_boot=korat/u-boot.bin\0"					\
-	"load=tftp 200000 ${u_boot}\0"					\
-	"update=protect off F7F60000 F7FBFFFF;erase F7F60000 F7FBFFFF;"	\
-		"cp.b ${fileaddr} F7F60000 ${filesize};protect on "	\
-		"F7F60000 F7FBFFFF\0"					\
-	"upd=run load update\0"						\
-	"bootfile=korat/uImage\0"					\
-	"dtb=korat/korat.dtb\0"						\
-	"kernel_addr=F4000000\0"					\
-	"ramdisk_addr=F4400000\0"					\
-	"dtb_addr=F41E0000\0"						\
-	"udl=tftp 200000 ${bootfile}; erase F4000000 F41DFFFF; "	\
-		"cp.b ${fileaddr} F4000000 ${filesize}\0"		\
-	"udd=tftp 200000 ${dtb}; erase F41E0000 F41FFFFF; "		\
-		"cp.b ${fileaddr} F41E0000 ${filesize}\0"		\
-	"ll=setenv kernel_addr 200000; setenv dtb_addr 1000000; "	\
-		"tftp ${kernel_addr} ${uImage}; tftp ${dtb_addr} "	\
-		"${dtb}\0"						\
-	"rd_size=73728\0"						\
-	"ramargs=setenv bootargs root=/dev/ram rw "			\
-		"ramdisk_size=${rd_size}\0"				\
-	"usbdev=sda1\0"							\
-	"usbargs=setenv bootargs root=/dev/${usbdev} ro rootdelay=10\0"	\
-	"rootpath=/opt/eldk/ppc_4xxFP\0"				\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"pciclk=33\0"							\
-	"addide=setenv bootargs ${bootargs} ide=reverse "		\
-		"idebus=${pciclk}\0"					\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
-	"flash_cf=run usbargs addide addip addtty; "			\
-		"bootm ${kernel_addr} - ${dtb_addr}\0"			\
-	"flash_nfs=run nfsargs addide addip addtty; "			\
-		"bootm ${kernel_addr} - ${dtb_addr}\0"			\
-	"flash_self=run ramargs addip addtty; "				\
-		"bootm ${kernel_addr} ${ramdisk_addr} ${dtb_addr}\0"	\
-	""
-
-#define CONFIG_BOOTCOMMAND	"run flash_cf"
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_IBM_EMAC4_V4	1
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR		2	/* PHY address, See schematics	*/
-#define CONFIG_PHY_DYNAMIC_ANEG	1
-
-#undef CONFIG_PHY_RESET			/* Don't do software PHY reset	*/
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_SYS_RX_ETH_BUFFER	32	/* Number of ethernet rx	*/
-					/*   buffers & descriptors	*/
-#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
-#define CONFIG_PHY1_ADDR	3
-
-/* USB */
-#define CONFIG_USB_OHCI
-#define CONFIG_USB_STORAGE
-
-/* Comment this out to enable USB 1.1 device */
-#define USB_2_0_DEVICE
-
-/* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_SUBNETMASK
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_USB
-
-/* POST support */
-#define CONFIG_POST		(CONFIG_SYS_POST_CACHE	| \
-				 CONFIG_SYS_POST_CPU	| \
-				 CONFIG_SYS_POST_ECC	| \
-				 CONFIG_SYS_POST_ETHER	| \
-				 CONFIG_SYS_POST_FPU	| \
-				 CONFIG_SYS_POST_I2C	| \
-				 CONFIG_SYS_POST_MEMORY	| \
-				 CONFIG_SYS_POST_RTC	| \
-				 CONFIG_SYS_POST_SPR	| \
-				 CONFIG_SYS_POST_UART)
-
-#define CONFIG_LOGBUFFER
-#define CONFIG_SYS_POST_CACHE_ADDR	0xC8000000	/* free virtual address     */
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* Otherwise it catches logbuffer as output */
-
-#define CONFIG_SUPPORT_VFAT
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-					/* Print Buffer Size		*/
-#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
-#define CONFIG_SYS_EXTBDINFO		1  /* To use extended board_into (bd_t)	*/
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_LOOPW		1	/* enable loopw command		*/
-#define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands	*/
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable	*/
-
-/*
- * Korat-specific options
- */
-#define CONFIG_SYS_KORAT_MAN_RESET_MS	10000	/* timeout for manufacturer reset */
-
-/*
- * PCI stuff
- */
-/* General PCI */
-#define CONFIG_PCI			/* include pci support		*/
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	0	/* to avoid problems with PNP	*/
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
-#define CONFIG_SYS_PCI_TARGBASE	0x80000000	/* PCIaddr mapped to	*/
-						/*   CONFIG_SYS_PCI_MEMBASE	*/
-/* Board-specific PCI */
-#define CONFIG_SYS_PCI_TARGET_INIT
-#define CONFIG_SYS_PCI_MASTER_INIT
-#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
-#define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
-
-/*
- * For booting Linux, the board info and command line data have to be in the
- * first 8 MB of memory, since this is the maximum mapped by the Linux kernel
- * during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
-
-/*
- * External Bus Controller (EBC) Setup
- */
-
-/* Memory Bank 0 (NOR-FLASH) initialization				*/
-#if CONFIG_SYS_FLASH0_SIZE == 0x01000000
-#define CONFIG_SYS_EBC_PB0AP		0x04017300
-#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH0_ADDR | 0x0009A000)
-#elif CONFIG_SYS_FLASH0_SIZE == 0x04000000
-#define CONFIG_SYS_EBC_PB0AP		0x04017300
-#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH0_ADDR | 0x000DA000)
-#else
-#error Unable to configure chip select for current CONFIG_SYS_FLASH0_SIZE
-#endif
-
-/* Memory Bank 1 (NOR-FLASH) initialization				*/
-#if CONFIG_SYS_FLASH1_MAX_SIZE == 0x08000000
-#define CONFIG_SYS_EBC_PB1AP		0x04017300
-#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_FLASH1_ADDR | 0x000FA000)
-#else
-#error Unable to configure chip select for current CONFIG_SYS_FLASH1_MAX_SIZE
-#endif
-
-/* Memory Bank 2 (CPLD) initialization					*/
-#define CONFIG_SYS_EBC_PB2AP		0x04017300
-#define CONFIG_SYS_EBC_PB2CR		(CONFIG_SYS_CPLD_BASE | 0x00038000)
-
-/*
- * GPIO Setup
- *
- * Korat GPIO usage:
- *
- *                   Init.
- * Pin    Source I/O value Function
- * ------ ------ --- ----- ---------------------------------
- * GPIO00  Alt1  I/O   x   PerAddr07
- * GPIO01  Alt1  I/O   x   PerAddr06
- * GPIO02  Alt1  I/O   x   PerAddr05
- * GPIO03  GPIO   x    x   GPIO03 to expansion bus connector
- * GPIO04  GPIO   x    x   GPIO04 to expansion bus connector
- * GPIO05  GPIO   x    x   GPIO05 to expansion bus connector
- * GPIO06  Alt1   O    x   PerCS1 (2nd NOR flash)
- * GPIO07  Alt1   O    x   PerCS2 (CPLD)
- * GPIO08  Alt1   O    x   PerCS3 to expansion bus connector
- * GPIO09  Alt1   O    x   PerCS4 to expansion bus connector
- * GPIO10  Alt1   O    x   PerCS5 to expansion bus connector
- * GPIO11  Alt1   I    x   PerErr
- * GPIO12  GPIO   O    0   ATMega !Reset
- * GPIO13  GPIO   x    x   Test Point 2 (TP2)
- * GPIO14  GPIO   O    1   Write protect EEPROM #1 (0xA8)
- * GPIO15  GPIO   O    0   CPU Run LED !On
- * GPIO16  Alt1   O    x   GMC1TxD0
- * GPIO17  Alt1   O    x   GMC1TxD1
- * GPIO18  Alt1   O    x   GMC1TxD2
- * GPIO19  Alt1   O    x   GMC1TxD3
- * GPIO20  Alt1   I    x   RejectPkt0
- * GPIO21  Alt1   I    x   RejectPkt1
- * GPIO22  GPIO   I    x   PGOOD_DDR
- * GPIO23  Alt1   O    x   SCPD0
- * GPIO24  Alt1   O    x   GMC0TxD2
- * GPIO25  Alt1   O    x   GMC0TxD3
- * GPIO26  GPIO? I/O   x   IIC0SDA (selected in SDR0_PFC4)
- * GPIO27  GPIO   O    0   PHY #0 1000BASE-X select
- * GPIO28  GPIO   O    0   PHY #1 1000BASE-X select
- * GPIO29  GPIO   I    x   Test jumper !Present
- * GPIO30  GPIO   I    x   SFP module #0 !Present
- * GPIO31  GPIO   I    x   SFP module #1 !Present
- *
- * GPIO32  GPIO   O    1   SFP module #0 Tx !Enable
- * GPIO33  GPIO   O    1   SFP module #1 Tx !Enable
- * GPIO34  Alt2   I    x   !UART1_CTS
- * GPIO35  Alt2   O    x   !UART1_RTS
- * GPIO36  Alt1   I    x   !UART0_CTS
- * GPIO37  Alt1   O    x   !UART0_RTS
- * GPIO38  Alt2   O    x   UART1_Tx
- * GPIO39  Alt2   I    x   UART1_Rx
- * GPIO40  Alt1   I    x   IRQ0 (Ethernet 0)
- * GPIO41  Alt1   I    x   IRQ1 (Ethernet 1)
- * GPIO42  Alt1   I    x   IRQ2 (PCI interrupt)
- * GPIO43  Alt1   I    x   IRQ3 (System Alert from CPLD)
- * GPIO44  xxxx   x    x   (grounded through pulldown)
- * GPIO45  GPIO   O    0   PHY #0 Enable
- * GPIO46  GPIO   O    0   PHY #1 Enable
- * GPIO47  GPIO   I    x   Reset switch !Pressed
- * GPIO48  GPIO   I    x   Shutdown switch !Pressed
- * GPIO49  xxxx   x    x   (reserved for trace port)
- *   .      .     .    .               .
- *   .      .     .    .               .
- *   .      .     .    .               .
- * GPIO63  xxxx   x    x   (reserved for trace port)
- */
-
-#define CONFIG_SYS_GPIO_ATMEGA_RESET_	12
-#define CONFIG_SYS_GPIO_ATMEGA_SS_	13
-#define CONFIG_SYS_GPIO_PHY0_FIBER_SEL	27
-#define CONFIG_SYS_GPIO_PHY1_FIBER_SEL	28
-#define CONFIG_SYS_GPIO_SFP0_PRESENT_	30
-#define CONFIG_SYS_GPIO_SFP1_PRESENT_	31
-#define CONFIG_SYS_GPIO_SFP0_TX_EN_	32
-#define CONFIG_SYS_GPIO_SFP1_TX_EN_	33
-#define CONFIG_SYS_GPIO_PHY0_EN	45
-#define CONFIG_SYS_GPIO_PHY1_EN	46
-#define CONFIG_SYS_GPIO_RESET_PRESSED_	47
-
-/*
- * PPC440 GPIO Configuration
- */
-#define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
-{											\
-/* GPIO Core 0 */									\
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1	EBC_ADDR(6)	DMA_ACK(2)	*/	\
-{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2	EBC_ADDR(5)	DMA_EOT/TC(2)	*/	\
-{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO3	EBC_ADDR(4)	DMA_REQ(3)	*/	\
-{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO4	EBC_ADDR(3)	DMA_ACK(3)	*/	\
-{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO5	EBC_ADDR(2)	DMA_EOT/TC(3)	*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6	EBC_CS_N(1)			*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7	EBC_CS_N(2)			*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	EBC_CS_N(3)			*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	EBC_CS_N(4)			*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5)			*/	\
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR			*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12				*/	\
-{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO13				*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14				*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15				*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4)			*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5)			*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6)			*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7)			*/	\
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0			*/	\
-{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1			*/	\
-{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22				*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0				*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2)			*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3)			*/	\
-{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26				*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ	USB2D_RXERROR	*/	\
-{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28		USB2D_TXVALID	*/	\
-{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA	USB2D_PAD_SUSPNDM */	\
-{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK	USB2D_XCVRSELECT*/	\
-{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ	USB2D_TERMSELECT*/	\
-},											\
-{											\
-/* GPIO Core 1 */									\
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0	EBC_DATA(2)	*/	\
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1	EBC_DATA(3)	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N	UART1_DSR_CTS_N	UART2_SOUT*/ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
-{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0)	UART3_SIN*/ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO37 UART0_RTS_N	EBC_DATA(1)	UART3_SOUT*/ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N	UART1_SOUT	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N	UART1_SIN	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0)			*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1)			*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2)			*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3)			*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4)	DMA_ACK(1)	*/	\
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6)	DMA_EOT/TC(1)	*/	\
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7)	DMA_REQ(0)	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8)	DMA_ACK(0)	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9)	DMA_EOT/TC(0)	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  Unselect via TraceSelect Bit	*/	\
-}											\
-}
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400 /* speed to run kgdb serial port	*/
-#endif
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#endif /* __CONFIG_H */