board: toradex: imx: Remove not needed env variables

Remove not needed variables from environment and include config files.

 - setup variable used to be executed from some bootscript, however
   it's not required and there is no point on having this small helper
   here
 - boot_file, kernel_file, ip_dyn variables are not used anywhere
 - fdt_fixup variable is just set empty
 - defargs, vidargs variables used to be used from some bootscript,
   however there is no point on having it here and even old legacy
   bootscript can work without them
 - removed CONFIG_ENABLE_DDR_TRAINING_DEBUG, this is a leftover from
   some copy/paste

On colibri imx6ull/imx7 NAND module, remove consoleblank=0, this is
already the Linux kernel default therefore useless.

Various Linux Kernel command line options removed are not-existing
left-over that applied to some old NXP i.MX downstream branch

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

8 files changed, 8 insertions, 43 deletions

diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
index 845705c86db..c8ec034fc97 100644
--- a/include/configs/apalis-imx8.h
+++ b/include/configs/apalis-imx8.h
@@ -46,8 +46,6 @@
 	"fdt_board=eval\0" \
 	"initrd_addr=0x83800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
-		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin resp. u-boot-dtb.imx (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
 		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 8a9f3ef75a7..0df3917e200 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -64,12 +64,9 @@
 
 #define CFG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
-	"boot_file=zImage\0" \
 	"boot_script_dhcp=boot.scr\0" \
 	"console=ttymxc0\0" \
-	"defargs=enable_wait_mode=off vmalloc=400M\0" \
 	"fdt_board=eval\0" \
-	"fdt_fixup=;\0" \
 	MEM_LAYOUT_ENV_SETTINGS \
 	UBOOT_UPDATE \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
@@ -80,16 +77,12 @@
 		"|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \
 		" ${loadaddr} flash_blk.img && " \
 		"source ${loadaddr}\0" \
-	"setup=setenv setupargs fec_mac=${ethaddr} " \
-		"consoleblank=0 no_console_suspend=1 console=tty1 " \
-		"console=${console},${baudrate}n8\0 " \
 	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 	"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 		"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 		"source ${loadaddr}\0" \
 	"splashpos=m,m\0" \
-	"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"vidargs=mxc_hdmi.only_cea=1 fbmem=32M\0"
+	"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"
 
 /* Miscellaneous configurable options */
 
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 561a61ebc03..7c9d633b68d 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -48,8 +48,8 @@
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
 		"ubi.fm_autoconvert=1\0" \
 	"ubiboot=run setup; " \
-		"setenv bootargs ${defargs} ${ubiargs} " \
-		"${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...; " \
+		"setenv bootargs ${ubiargs} " \
+		"${setupargs} ${tdxargs}; echo Booting from NAND...; " \
 		"ubi part ubi &&" \
 		"ubi read ${kernel_addr_r} kernel && " \
 		"ubi read ${fdt_addr_r} dtb && " \
@@ -86,11 +86,7 @@
 	UBOOT_UPDATE \
 	"boot_script_dhcp=boot.scr\0" \
 	"console=ttymxc0\0" \
-	"defargs=user_debug=30\0" \
 	"fdt_board=eval-v3\0" \
-	"fdt_fixup=;\0" \
-	"ip_dyn=yes\0" \
-	"kernel_file=zImage\0" \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 		"${board}/flash_eth.img && source ${loadaddr}\0" \
@@ -99,7 +95,7 @@
 		"${board}/flash_blk.img && source ${loadaddr}\0" \
 	"setup=setenv setupargs " \
 		"console=tty1 console=${console}" \
-		",${baudrate}n8 ${memargs} ${mtdparts} consoleblank=0\0" \
+		",${baudrate}n8 ${memargs} ${mtdparts}\0" \
 	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 	"setusbupdate=usb start && setenv interface usb && " \
 		"fatload ${interface} 0:1 ${loadaddr} " \
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 042fcb8757f..2b7fea30116 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -40,8 +40,6 @@
 	"fdt_board=eval-v3\0" \
 	"initrd_addr=0x83800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
-		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin resp. u-boot-dtb.imx (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
 		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 4b2841833b5..79e5b870b81 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -58,12 +58,9 @@
 
 #define CFG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
-	"boot_file=zImage\0" \
 	"boot_script_dhcp=boot.scr\0" \
 	"console=ttymxc0\0" \
-	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
 	"fdt_board=eval-v3\0" \
-	"fdt_fixup=;\0" \
 	MEM_LAYOUT_ENV_SETTINGS \
 	UBOOT_UPDATE \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
@@ -72,16 +69,12 @@
 	"setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 		"${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 		"source ${loadaddr}\0" \
-	"setup=setenv setupargs fec_mac=${ethaddr} " \
-		"consoleblank=0 no_console_suspend=1 console=tty1 " \
-		"console=${console},${baudrate}n8\0 " \
 	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 	"setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 		"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 		"source ${loadaddr}\0" \
 	"splashpos=m,m\0" \
-	"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"vidargs=fbmem=8M\0"
+	"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"
 
 /* Miscellaneous configurable options */
 
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 7a9f4afe7d1..c34f1f903df 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -89,8 +89,8 @@
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 		"ubi.fm_autoconvert=1\0" \
 	"ubiboot=run setup; " \
-		"setenv bootargs ${defargs} ${ubiargs} " \
-		"${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...; " \
+		"setenv bootargs ${ubiargs} " \
+		"${setupargs} ${tdxargs}; echo Booting from NAND...; " \
 		"ubi part ubi && run m4boot && " \
 		"ubi read ${kernel_addr_r} kernel && " \
 		"ubi read ${fdt_addr_r} dtb && " \
@@ -123,15 +123,10 @@
 	MEM_LAYOUT_ENV_SETTINGS \
 	MODULE_EXTRA_ENV_SETTINGS \
 	UBOOT_UPDATE \
-	"boot_file=zImage\0" \
 	"boot_script_dhcp=boot.scr\0" \
 	"console=ttymxc0\0" \
-	"defargs=\0" \
 	"fdt_board=eval-v3\0" \
-	"fdt_fixup=;\0" \
 	"m4boot=;\0" \
-	"ip_dyn=yes\0" \
-	"kernel_file=zImage\0" \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 		"${board}/flash_eth.img && source ${loadaddr}\0" \
@@ -140,7 +135,7 @@
 		"${board}/flash_blk.img && source ${loadaddr}\0" \
 	"setup=setenv setupargs " \
 		"console=tty1 console=${console}" \
-		",${baudrate}n8 ${memargs} ${mtdparts} consoleblank=0\0" \
+		",${baudrate}n8 ${memargs} ${mtdparts}\0" \
 	"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 	"setusbupdate=usb start && setenv interface usb && " \
 		"fatload ${interface} 0:1 ${loadaddr} " \
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index a7ea02807dd..34238d3b505 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -37,14 +37,11 @@
 #define CFG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
-	"boot_file=Image\0" \
 	"boot_script_dhcp=boot.scr\0" \
 	"console=ttymxc0\0" \
 	"fdt_board=dev\0" \
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
-		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
 		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
index 256bab089ff..0b88e95603d 100644
--- a/include/configs/verdin-imx8mp.h
+++ b/include/configs/verdin-imx8mp.h
@@ -13,7 +13,6 @@
 	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
 
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
 #define CFG_MALLOC_F_ADDR				0x184000
@@ -40,15 +39,11 @@
 #define CFG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
-	"boot_file=Image\0" \
-	"boot_scripts=boot.scr\0" \
 	"boot_script_dhcp=boot.scr\0" \
 	"console=ttymxc2\0" \
 	"fdt_board=dev\0" \
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"setup=setenv setupargs console=tty1 console=${console},${baudrate} " \
-		"consoleblank=0 earlycon\0" \
 	"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
 		"if test \"$confirm\" = \"y\"; then " \
 		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \