Merge tag 'u-boot-imx-20190612' of git://git.denx.de/u-boot-imx

u-boot-imx-20190612
--------------------

- Board fixes:
	- imx6logic
	- wandboard
	- mx6sabre boots again
	- imx8qm_mek
	- pico-* boards
	- Toradex apalis / colibri
	- engicam imx6 (environment)
	- KP MX53
	- opos6ul
- Switch to DM:
	- vining2000
	- dh MX6
	- Toradex colibri i.MX7
	- Novena
- Security : fix CSF size for HAB
- Other:
      - imx: fix building for i.mx8 without spl
      - pcie and switch to DM

      mx6sabreauto: Enable SPL SDP support

22 files changed, 680 insertions, 133 deletions

diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
new file mode 100644
index 00000000000..be2c5a2293f
--- /dev/null
+++ b/include/configs/apalis-imx8.h
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 Toradex
+ */
+
+#ifndef __APALIS_IMX8_H
+#define __APALIS_IMX8_H
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+#undef CONFIG_BOOTM_NETBSD
+
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define USDHC1_BASE_ADDR		0x5b010000
+#define USDHC2_BASE_ADDR		0x5b020000
+#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+/* Networking */
+#define FEC_QUIRK_ENET_MAC
+
+#define CONFIG_IP_DEFRAG
+#define CONFIG_TFTP_BLOCKSIZE		SZ_4K
+#define CONFIG_TFTP_TSIZE
+
+#define CONFIG_IPADDR			192.168.10.2
+#define CONFIG_NETMASK			255.255.255.0
+#define CONFIG_SERVERIP			192.168.10.1
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"fdt_addr_r=0x84000000\0" \
+	"kernel_addr_r=0x82000000\0" \
+	"ramdisk_addr_r=0x94400000\0" \
+	"scriptaddr=0x87000000\0"
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 2) \
+	func(MMC, mmc, 0) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+#undef BOOTENV_RUN_NET_USB_START
+#define BOOTENV_RUN_NET_USB_START ""
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	BOOTENV \
+	MEM_LAYOUT_ENV_SETTINGS \
+	"console=ttyLP1 earlycon\0" \
+	"fdt_addr=0x83000000\0"	\
+	"fdt_file=fsl-imx8qm-apalis-eval.dtb\0" \
+	"fdtfile=fsl-imx8qm-apalis-eval.dtb\0" \
+	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
+	"image=Image\0" \
+	"initrd_addr=0x83800000\0" \
+	"initrd_high=0xffffffffffffffff\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=PARTUUID=${uuid} rootwait " \
+	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
+		"\0" \
+	"nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
+		"apalis-imx8/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \
+	"panel=NULL\0" \
+	"script=boot.scr\0" \
+	"update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
+		"if test \"$confirm\" = \"y\"; then " \
+		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
+		"${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
+		"${blkcnt}; fi\0"
+
+/* Link Definitions */
+#define CONFIG_LOADADDR			0x80280000
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_SP_ADDR		0x80200000
+
+#define CONFIG_SYS_MEMTEST_START	0x88000000
+#define CONFIG_SYS_MEMTEST_END		0x89000000
+
+/* Environment in eMMC, before config block at the end of 1st "boot sector" */
+#define CONFIG_ENV_SIZE			SZ_8K
+#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
+					 CONFIG_TDX_CFG_BLOCK_OFFSET)
+#define CONFIG_SYS_MMC_ENV_DEV		0	/* USDHC1 eMMC */
+#define CONFIG_SYS_MMC_ENV_PART		1
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+/* On Apalis iMX8 USDHC1 is eMMC, USDHC2 is 8-bit and USDHC3 is 4-bit MMC/SD */
+#define CONFIG_SYS_FSL_USDHC_NUM	3
+
+#define CONFIG_SYS_BOOTM_LEN		SZ_64M /* Increase max gunzip size */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define PHYS_SDRAM_1			0x80000000
+#define PHYS_SDRAM_2			0x880000000
+#define PHYS_SDRAM_1_SIZE		SZ_2G		/* 2 GB */
+#define PHYS_SDRAM_2_SIZE		SZ_2G		/* 2 GB */
+
+/* Serial */
+#define CONFIG_BAUDRATE			115200
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_CBSIZE		SZ_2K
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		8000000	/* 8MHz */
+
+#endif /* __APALIS_IMX8_H */
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 9c8c8979f04..490ca64b100 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -48,15 +48,22 @@
 				"tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
 
 #define EMMC_BOOTCMD \
-	"emmcargs=ip=off root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait\0" \
-	"emmcboot=run setup; setenv bootargs ${defargs} ${emmcargs} " \
-		"${setupargs} ${vidargs}; echo Booting from internal eMMC " \
-		"chip...; run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
+	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
+		"ro rootfstype=ext4 rootwait\0" \
+	"emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
+		"setenv bootargs ${defargs} ${emmcargs} " \
+		"${setupargs} ${vidargs}; echo Booting from internal eMMC; " \
+		"run emmcdtbload; " \
+		"load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
 		"${boot_file} && run fdt_fixup && " \
 		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
-	"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
-		"${soc}-apalis-${fdt_board}.dtb && " \
-		"setenv dtbparam ${fdt_addr_r}\0"
+	"emmcbootpart=1\0" \
+	"emmcdev=0\0" \
+	"emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
+		"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb && " \
+		"setenv dtbparam ${fdt_addr_r}\0" \
+	"emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
+	"emmcrootpart=2\0"
 
 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
@@ -69,26 +76,38 @@
 		"&& setenv dtbparam ${fdt_addr_r}\0"
 
 #define SD_BOOTCMD \
-	"sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait\0" \
-	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
+	"set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} ro " \
+	"rootfstype=ext4 rootwait\0" \
+	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
+		"setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 		"${vidargs}; echo Booting from SD card in 8bit slot...; " \
-		"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
-		"${boot_file} && run fdt_fixup && " \
+		"run sddtbload; load mmc ${sddev}:${sdbootpart} " \
+		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
 		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
-	"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
-		"${soc}-apalis-${fdt_board}.dtb " \
-		"&& setenv dtbparam ${fdt_addr_r}\0"
+	"sdbootpart=1\0" \
+	"sddev=1\0" \
+	"sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
+		"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \
+		"&& setenv dtbparam ${fdt_addr_r}\0" \
+	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
+	"sdrootpart=2\0"
 
 #define USB_BOOTCMD \
-	"usbargs=ip=off root=/dev/sda2 rw rootfstype=ext4 rootwait\0" \
-	"usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
+	"set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} ro " \
+		"rootfstype=ext4 rootwait\0" \
+	"usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \
+		"setenv bootargs ${defargs} ${setupargs} " \
 		"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
-		"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
-		"${boot_file} && run fdt_fixup && " \
+		"run usbdtbload; load usb ${usbdev}:${usbbootpart} " \
+		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
 		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
-	"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
-		"${soc}-apalis-${fdt_board}.dtb " \
-		"&& setenv dtbparam ${fdt_addr_r}\0"
+	"usbbootpart=1\0" \
+	"usbdev=0\0" \
+	"usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \
+		"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \
+		"&& setenv dtbparam ${fdt_addr_r}\0" \
+	"usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
+	"usbrootpart=2\0"
 
 #define BOARD_EXTRA_ENV_SETTINGS \
 	"boot_file=uImage\0" \
@@ -101,6 +120,7 @@
 	"fdt_fixup=;\0" \
 	NFS_BOOTCMD \
 	SD_BOOTCMD \
+	USB_BOOTCMD \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
 		"flash_eth.img && source ${loadaddr}\0" \
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 9d9e16e5d96..54094e495a9 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -123,16 +123,21 @@
 	"imx6q-apalis-cam-eval.dtb fat 0 1"
 
 #define EMMC_BOOTCMD \
-	"emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext4 " \
-		"rootwait\0" \
-	"emmcboot=run setup; " \
+	"set_emmcargs emmcargs ip=off root=PARTUUID=${uuid} ro,noatime " \
+		"rootfstype=ext4 rootwait\0" \
+	"emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
 		"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 		"${vidargs}; echo Booting from internal eMMC chip...; "	\
-		"run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
-		"${boot_file} && run fdt_fixup && " \
+		"run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
+		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
 		"bootz ${kernel_addr_r} ${dtbparam}\0" \
-	"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
-		"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+	"emmcbootpart=1\0" \
+	"emmcdev=0\0" \
+	"emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
+		"${fdt_addr_r} ${fdt_file} && " \
+		"setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
+	"emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
+	"emmcrootpart=2\0"
 
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x20000000\0" \
@@ -145,7 +150,7 @@
 	"scriptaddr=0x17000000\0"
 
 #define NFS_BOOTCMD \
-	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
+	"nfsargs=ip=:::::eth0:on root=/dev/nfs ro\0" \
 	"nfsboot=run setup; " \
 		"setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 		"${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
@@ -155,27 +160,43 @@
 		"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 
 #define SD_BOOTCMD \
-	"sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext4 " \
-		"rootwait\0" \
-	"sdboot=run setup; " \
+	"set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} ro,noatime " \
+		"rootfstype=ext4 rootwait\0" \
+	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
 		"setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 		"${vidargs}; echo Booting from SD card; " \
-		"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
-		"${boot_file} && run fdt_fixup && " \
+		"run sddtbload; load mmc ${sddev}:${sdbootpart} " \
+		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
 		"bootz ${kernel_addr_r} ${dtbparam}\0" \
-	"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
-		"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+	"sdbootpart=1\0" \
+	"sddev=1\0" \
+	"sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
+		"${fdt_addr_r} " \
+		"${fdt_file} && setenv dtbparam \" - " \
+		"${fdt_addr_r}\" && true\0" \
+	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
+	"sdrootpart=2\0"
+
 
 #define USB_BOOTCMD \
-	"usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext4 " \
-		"rootwait\0" \
-	"usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
+	"set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} ro,noatime " \
+		"rootfstype=ext4 rootwait\0" \
+	"usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \
+		"setenv bootargs ${defargs} ${setupargs} " \
 		"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
-		"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
+		"run usbdtbload; load usb " \
+		"${usbdev}:${usbbootpart} ${kernel_addr_r} " \
 		"${boot_file} && run fdt_fixup && " \
 		"bootz ${kernel_addr_r} ${dtbparam}\0" \
-	"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
-		"${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+	"usbbootpart=1\0" \
+	"usbdev=0\0" \
+	"usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} "\
+		"${fdt_addr_r} " \
+		"${fdt_file} && setenv dtbparam \" - " \
+		"${fdt_addr_r}\" && true\0" \
+	"usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
+	"usbrootpart=2\0"
+
 
 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 #define FDT_FILE "imx6q-apalis-eval.dtb"
@@ -186,7 +207,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	"bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
-		"run distro_bootcmd ; " \
+		"setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
 		"usb start ; " \
 		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
@@ -199,6 +220,7 @@
 	MEM_LAYOUT_ENV_SETTINGS \
 	NFS_BOOTCMD \
 	SD_BOOTCMD \
+	USB_BOOTCMD \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 		"flash_eth.img && source ${loadaddr}\0" \
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index fc39e807b6a..b221e118fa4 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -62,12 +62,17 @@
 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define SD_BOOTCMD \
-	"sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
-	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
+	"set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \
+	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
+	"setenv bootargs ${defargs} ${sdargs} " \
 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
-	"load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \
+	"load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
+	"load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " FDT_FILE " && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+	"sdbootpart=1\0" \
+	"sddev=0\0" \
+	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
+	"sdrootpart=2\0"
 
 #define UBI_BOOTCMD \
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
new file mode 100644
index 00000000000..c6a38d5118d
--- /dev/null
+++ b/include/configs/colibri-imx8x.h
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 Toradex
+ */
+
+#ifndef __COLIBRI_IMX8X_H
+#define __COLIBRI_IMX8X_H
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+#undef CONFIG_BOOTM_NETBSD
+
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define USDHC1_BASE_ADDR		0x5b010000
+#define USDHC2_BASE_ADDR		0x5b020000
+#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+/* Networking */
+#define FEC_QUIRK_ENET_MAC
+
+#define CONFIG_IP_DEFRAG
+#define CONFIG_TFTP_BLOCKSIZE		SZ_4K
+#define CONFIG_TFTP_TSIZE
+
+#define CONFIG_IPADDR			192.168.10.2
+#define CONFIG_NETMASK			255.255.255.0
+#define CONFIG_SERVERIP			192.168.10.1
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"fdt_addr_r=0x83000000\0" \
+	"kernel_addr_r=0x81000000\0" \
+	"ramdisk_addr_r=0x83800000\0" \
+	"scriptaddr=0x80800000\0"
+
+#ifdef CONFIG_AHAB_BOOT
+#define AHAB_ENV "sec_boot=yes\0"
+#else
+#define AHAB_ENV "sec_boot=no\0"
+#endif
+
+/* Boot M4 */
+#define M4_BOOT_ENV \
+	"m4_0_image=m4_0.bin\0" \
+	"loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+		"${m4_0_image}\0" \
+	"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
+
+#define MFG_NAND_PARTITION ""
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+#undef BOOTENV_RUN_NET_USB_START
+#define BOOTENV_RUN_NET_USB_START ""
+
+#define CONFIG_MFG_ENV_SETTINGS \
+	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+		"rdinit=/linuxrc g_mass_storage.stall=0 " \
+		"g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
+		"g_mass_storage.idProduct=0x37FF " \
+		"g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
+		"${vidargs} clk_ignore_unused\0" \
+	"initrd_addr=0x83800000\0" \
+	"initrd_high=0xffffffff\0" \
+	"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
+		"${fdt_addr};\0" \
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	AHAB_ENV \
+	BOOTENV \
+	CONFIG_MFG_ENV_SETTINGS \
+	M4_BOOT_ENV \
+	MEM_LAYOUT_ENV_SETTINGS \
+	"console=ttyLP3 earlycon\0" \
+	"fdt_addr=0x83000000\0"	\
+	"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
+	"fdtfile=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
+	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
+	"image=Image\0" \
+	"initrd_addr=0x83800000\0" \
+	"initrd_high=0xffffffffffffffff\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=PARTUUID=${uuid} rootwait " \
+	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
+		"${vidargs}\0" \
+	"nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
+		"colibri-imx8x/${fdt_file}; booti ${loadaddr} - " \
+		"${fdt_addr}\0" \
+	"panel=NULL\0" \
+	"script=boot.scr\0" \
+	"update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
+		"if test \"$confirm\" = \"y\"; then " \
+		"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
+		"${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
+		"${blkcnt}; fi\0" \
+	"vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
+
+/* Link Definitions */
+#define CONFIG_LOADADDR			0x80280000
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_SP_ADDR		0x80200000
+
+#define CONFIG_SYS_MEMTEST_START	0x88000000
+#define CONFIG_SYS_MEMTEST_END		0x89000000
+
+/* Environment in eMMC, before config block at the end of 1st "boot sector" */
+#define CONFIG_ENV_SIZE			SZ_8K
+#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
+					 CONFIG_TDX_CFG_BLOCK_OFFSET)
+#define CONFIG_SYS_MMC_ENV_DEV		0	/* USDHC1 eMMC */
+#define CONFIG_SYS_MMC_ENV_PART		1
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+/* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+
+#define CONFIG_SYS_BOOTM_LEN		SZ_64M /* Increase max gunzip size */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define PHYS_SDRAM_1			0x80000000
+#define PHYS_SDRAM_2			0x880000000
+#define PHYS_SDRAM_1_SIZE		SZ_2G		/* 2 GB */
+#define PHYS_SDRAM_2_SIZE		0x00000000	/* 0 GB */
+
+/* Serial */
+#define CONFIG_BAUDRATE			115200
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_CBSIZE		SZ_2K
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		8000000	/* 8MHz */
+
+#define BOOTAUX_RESERVED_MEM_BASE 0x88000000
+#define BOOTAUX_RESERVED_MEM_SIZE SZ_128M /* Reserve from second 128MB */
+
+#endif /* __COLIBRI_IMX8X_H */
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index b540b3e0749..1cdf83d82d3 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -190,7 +190,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	"bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
-		"run distro_bootcmd ; " \
+		"setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
 		"usb start ; " \
 		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index c3b353b2c27..545f506e97f 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -49,14 +49,22 @@
 #define CONFIG_SERVERIP			192.168.10.1
 
 #define EMMC_BOOTCMD \
-	"emmcargs=ip=off root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait\0" \
-	"emmcboot=run setup; " \
+	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} ro " \
+		"rootfstype=ext4 rootwait\0" \
+	"emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
 		"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 		"${vidargs}; echo Booting from internal eMMC chip...; " \
 		"run m4boot && " \
-		"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-emmc-${fdt_board}.dtb && " \
-		"load mmc 0:1 ${kernel_addr_r} ${boot_file} && " \
-		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0"
+		"load mmc ${emmcdev}:${emmcbootpart} ${fdt_addr_r} " \
+		"${soc}-colibri-emmc-${fdt_board}.dtb && " \
+		"load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
+		"${boot_file} && run fdt_fixup && " \
+		"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+	"emmcbootpart=1\0" \
+	"emmcdev=0\0" \
+	"emmcfinduuid=part uuid mmc ${emmcdev}:${emmcrootpart} uuid\0" \
+	"emmcrootpart=2\0"
+
 
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
@@ -67,24 +75,25 @@
 	"ramdisk_addr_r=0x82100000\0"
 
 #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
-#define SD_BOOTCMD \
-	"sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
-	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
-	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-	"run m4boot && " \
-	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
-	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
-	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0"
+#define SD_BOOTDEV 0
 #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
+#define SD_BOOTDEV 1
+#endif
+
 #define SD_BOOTCMD \
-	"sdargs=root=/dev/mmcblk1p2 ro rootwait\0" \
-	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
+	"set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \
+	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
+	"setenv bootargs ${defargs} ${sdargs} " \
 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
 	"run m4boot && " \
-	"load mmc 1:1 ${kernel_addr_r} ${kernel_file} && " \
-	"load mmc 1:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
-	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0"
-#endif
+	"load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
+	"load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \
+	"${soc}-colibri-${fdt_board}.dtb && " \
+	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+	"sdbootpart=1\0" \
+	"sddev=" __stringify(SD_BOOTDEV) "\0" \
+	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
+	"sdrootpart=2\0"
 
 
 #define NFS_BOOTCMD \
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 0d57e303a1b..da9a8426ecd 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -68,12 +68,19 @@
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define SD_BOOTCMD \
-	"sdargs=root=/dev/mmcblk0p2 ro rootwait\0"	\
-	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
+	"set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0"	\
+	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
+	"setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
-	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
+	"load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
+	"load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \
+		"${soc}-colibri-${fdt_board}.dtb && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+	"sdbootpart=1\0" \
+	"sddev=0\0" \
+	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
+	"sdrootpart=2\0"
+
 
 #define UBI_BOOTCMD \
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index 3eee382a643..3b1d0a99a19 100644
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -63,14 +63,14 @@
 #define CONFIG_SYS_MMC_ENV_DEV		2 /* 1 = SDHC3, 2 = SDHC4 (eMMC) */
 
 /* SATA Configs */
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_DWC_AHSATA_PORT_ID	0
-#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#endif
 
 /* SPI Flash Configs */
+#if defined(CONFIG_SPL_BUILD)
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#undef CONFIG_SPI_FLASH_MTD
+#endif
 
 /* UART */
 #define CONFIG_MXC_UART
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 571852d803a..56b3c7503eb 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -43,30 +43,20 @@
 	"fdt_addr=" FDT_ADDR "\0" \
 	"boot_fdt=try\0" \
 	"mmcpart=1\0" \
-	"recovery_device=0\0" \
-	"recovery_part=2\0" \
-	"recovery_root=/dev/mmcblk0p2 rootwait rw\0" \
 	"nandroot=ubi0:rootfs rootfstype=ubifs\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
-	"recovery_mmcargs= setenv bootargs console=${console},${baudrate} "\
-		"root=${recovery_root}\0" \
 	"ubiargs=setenv bootargs console=${console},${baudrate} " \
 		"ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"recovery_loadimage=ext2load mmc ${recovery_device}:${recovery_part} ${loadaddr} ${image}\0" \
-	"recovery_loadfdt=ext2load mmc ${recovery_device}:${recovery_part} ${fdt_addr} ${fdt_file}\0" \
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
-	"altbootcmd=run recovery_boot\0"\
-	"recovery_boot=echo Recovery Boot from mmc ...; " \
-		"run recovery_loadimage ; run recovery_loadfdt; run recovery_mmcargs; "\
-		"bootm ${loadaddr} - ${fdt_addr}\0" \
+	"altbootcmd=run recoveryboot\0"\
 	"fitboot=echo Booting FIT image from mmc ...; " \
 		"run mmcargs; " \
 		"bootm ${loadaddr}\0" \
@@ -108,7 +98,12 @@
 		"run ubiargs; " \
 		"nand read ${loadaddr} kernel 0x800000; " \
 		"nand read ${fdt_addr} dtb 0x100000; " \
-		"bootm ${loadaddr} - ${fdt_addr}\0"
+		"bootm ${loadaddr} - ${fdt_addr}\0" \
+	"recoveryboot=if test ${modeboot} = mmcboot; then " \
+			"run mmcboot; " \
+		"else " \
+			"run nandboot; " \
+		"fi\0"
 
 #define CONFIG_BOOTCOMMAND		"run $modeboot"
 
diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
index 2bdf3be6546..d06ed61c807 100644
--- a/include/configs/imx8qm_mek.h
+++ b/include/configs/imx8qm_mek.h
@@ -155,15 +155,6 @@
 /* Serial */
 #define CONFIG_BAUDRATE			115200
 
-/* Monitor Command Prompt */
-#define CONFIG_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_CBSIZE              2048
-#define CONFIG_SYS_MAXARGS             64
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY		8000000	/* 8MHz */
 
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 261661a9782..a8591c9256d 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -154,14 +154,6 @@
 /* Serial */
 #define CONFIG_BAUDRATE			115200
 
-/* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_CBSIZE              2048
-#define CONFIG_SYS_MAXARGS             64
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY		8000000	/* 8MHz */
 
diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h
index a252e9003de..55bfa0fe591 100644
--- a/include/configs/kp_imx53.h
+++ b/include/configs/kp_imx53.h
@@ -41,8 +41,10 @@
 	"addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \
 	"upd_image=st.4k\0" \
 	"uboot_file=u-boot.imx\0" \
-	"updargs=setenv bootargs console=${console} ${smp}"\
-	       "rdinit=${rdinit} ${debug} ${displayargs}\0" \
+	"updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \
+	"initrd_ram_dev=/dev/ram\0" \
+	"addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \
+	"addkeys=setenv bootargs ${bootargs} di=${dig_in} key1=${key1}\0" \
 	"loadusb=usb start; " \
 	       "fatload usb 0 ${loadaddr} ${upd_image}\0" \
 	"up=if tftp ${loadaddr} ${uboot_file}; then " \
@@ -59,6 +61,9 @@
 	"usbupd=echo Booting update from usb ...; " \
 	       "setenv bootargs; " \
 	       "run updargs; " \
+	       "run addinitrd; " \
+	       "run addswupdate; " \
+	       "run addkeys; " \
 	       "run loadusb; " \
 	       "bootm ${loadaddr}#${fit_config}\0" \
 	BOOTENV
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index 6b20c6db580..2b8ce9d71d0 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -59,7 +59,7 @@
 
 /* Secure boot (HAB) support */
 #ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CSF_SIZE			0x2000
+#define CONFIG_CSF_SIZE			0x4000
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #endif
diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index cc7e87269ee..4f822ef9a07 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -48,10 +48,21 @@
 
 /* Secure boot (HAB) support */
 #ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CSF_SIZE			0x2000
+#define CONFIG_CSF_SIZE			0x4000
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #endif
 #endif
 
+/*
+ * If we have defined the OPTEE ram size and not OPTEE it means that we were
+ * launched by OPTEE, because of that we shall skip all the low level
+ * initialization since it was already done by ATF or OPTEE
+ */
+#if (CONFIG_OPTEE_TZDRAM_SIZE != 0)
+#ifndef CONFIG_OPTEE
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+#endif
+
 #endif
diff --git a/include/configs/novena.h b/include/configs/novena.h
index bb5bf808c2b..cdc437c4925 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -102,12 +102,7 @@
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
 
 /* SATA Configs */
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
-#define CONFIG_DWC_AHSATA_PORT_ID	0
-#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#endif
 
 /* UART */
 #define CONFIG_MXC_UART
@@ -124,14 +119,12 @@
 #endif
 
 /* Video output */
-#ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#endif
 
 /* Extra U-Boot environment. */
 #ifndef CONFIG_SPL_BUILD
@@ -149,6 +142,8 @@
 	"ramdisk_addr_r=0x28000000\0"		   			\
 	"fdt_addr_r=0x18000000\0"					\
 	"fdtfile=imx6q-novena.dtb\0"					\
+	"stdout=serial,vidconsole\0"					\
+	"stderr=serial,vidconsole\0"					\
 	"addcons="							\
 		"setenv bootargs ${bootargs} "				\
 		"console=${consdev},${baudrate}\0"			\
diff --git a/include/configs/pcl063.h b/include/configs/pcl063.h
index 12d8d67f0ff..8fef250ac47 100644
--- a/include/configs/pcl063.h
+++ b/include/configs/pcl063.h
@@ -22,6 +22,8 @@
  * Tweak the SPL text base address to avoid this.
  */
 
+#define CONFIG_SYS_FSL_USDHC_NUM	1
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
 
diff --git a/include/configs/pcl063_ull.h b/include/configs/pcl063_ull.h
new file mode 100644
index 00000000000..0f1a010b4e5
--- /dev/null
+++ b/include/configs/pcl063_ull.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Board configuration file for Phytec phyBOARD-i.MX6ULL-Segin SBC
+ * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
+ *
+ * Based on include/configs/xpress.h:
+ * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
+ */
+#ifndef __PCL063_ULL_H
+#define __PCL063_ULL_H
+
+#include <linux/sizes.h>
+#include "mx6_common.h"
+
+/* SPL options */
+#include "imx6_spl.h"
+
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
+
+/* Environment settings */
+#define CONFIG_ENV_SIZE			(0x4000)
+#define CONFIG_ENV_OFFSET		(0x80000)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_OFFSET_REDUND	\
+	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+
+/* Environment in SD */
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_SYS_MMC_ENV_PART		0
+#define MMC_ROOTFS_DEV		0
+#define MMC_ROOTFS_PART		2
+
+/* Console configs */
+#define CONFIG_MXC_UART_BASE		UART1_BASE
+
+/* MMC Configs */
+#define CONFIG_FSL_USDHC
+
+#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
+#define CONFIG_SUPPORT_EMMC_BOOT
+
+/* I2C configs */
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_SPEED		100000
+#endif
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000000)
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+
+/* Physical Memory Map */
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+#define PHYS_SDRAM_SIZE			SZ_256M
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* NAND */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+
+/* USB Configs */
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	1
+
+#define CONFIG_IMX_THERMAL
+
+#define ENV_MMC \
+	"mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
+	"mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \
+	"fitpart=1\0" \
+	"bootdelay=3\0" \
+	"silent=1\0" \
+	"optargs=rw rootwait\0" \
+	"mmcautodetect=yes\0" \
+	"mmcrootfstype=ext4\0" \
+	"mmcfit_name=fitImage\0" \
+	"mmcloadfit=fatload mmc ${mmcdev}:${fitpart} ${fit_addr} " \
+		    "${mmcfit_name}\0" \
+	"mmcargs=setenv bootargs " \
+		"root=/dev/mmcblk${mmcdev}p${mmcpart} ${optargs} " \
+		"console=${console} rootfstype=${mmcrootfstype}\0" \
+	"mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"fdt_high=0xffffffff\0" \
+	"console=ttymxc0,115200n8\0" \
+	"addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
+	"fit_addr=0x82000000\0" \
+	ENV_MMC
+
+#define CONFIG_BOOTCOMMAND		"run mmc_mmc_fit"
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#endif /* __PCL063_ULL_H */
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 365a5984e4d..9a3b3b1e80b 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -52,11 +52,29 @@
 		"/boot/imx7d-pico-pi.dtb ext4 0 1;" \
 		"rootfs part 0 1\0" \
 
-#define BOOTMENU_ENV \
+/* When booting with FIT specify the node entry containing boot.scr */
+#if defined(CONFIG_FIT)
+#define PICO_BOOT_ENV \
+	"bootscr_fitimage_name=bootscr\0" \
+	"bootscriptaddr=0x83200000\0" \
+	"fdtovaddr=0x83100000\0" \
+	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"rootwait rw;\0" \
+	"loadbootscript=" \
+		"load mmc ${mmcdev}:${mmcpart} ${bootscriptaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+	"source ${bootscriptaddr}:${bootscr_fitimage_name}\0"
+#else
+#define PICO_BOOT_ENV \
 	"bootmenu_0=Boot using PICO-Hobbit baseboard=" \
 		"setenv fdtfile imx7d-pico-hobbit.dtb\0" \
 	"bootmenu_1=Boot using PICO-Pi baseboard=" \
 		"setenv fdtfile imx7d-pico-pi.dtb\0" \
+	BOOTENV
+#endif
+
 
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
@@ -69,7 +87,6 @@
 	"initrd_high=0xffffffff\0" \
 	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"videomode=video=ctfb:x:800,y:480,depth:24,mode:0,pclk:30000,le:46,ri:210,up:22,lo:23,hs:20,vs:10,sync:0,vmode:0\0" \
-	BOOTMENU_ENV \
 	"fdt_addr=0x83000000\0" \
 	"fdt_addr_r=0x83000000\0" \
 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
@@ -89,7 +106,22 @@
 		"name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \
 	"fastboot_partition_alias_system=rootfs\0" \
 	"setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \
-	BOOTENV
+	PICO_BOOT_ENV
+
+#if defined(CONFIG_FIT)
+#define CONFIG_BOOTCOMMAND \
+	"mmc dev ${mmcdev};" \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
+		"if run loadbootscript; then " \
+			"iminfo ${bootscriptaddr};" \
+			"if test $? -eq 1; then hab_failsafe; fi;" \
+			"run bootscript; " \
+		"else " \
+			"echo Fail to load fitImage with boot script;" \
+			"hab_failsafe;" \
+		"fi; " \
+	"fi"
+#endif
 
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index fd98c1417e7..d4db9b4a567 100644
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -17,9 +17,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
 
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE		UART1_BASE
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 0ef8e359480..8ceaa0c6c60 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -13,17 +13,6 @@
 
 #define PHYS_SDRAM_SIZE			SZ_512M
 
-/*
- * If we have defined the OPTEE ram size and not OPTEE it means that we were
- * launched by OPTEE, because of that we shall skip all the low level
- * initialization since it was already done by ATF or OPTEE
- */
-#ifdef CONFIG_OPTEE_TZDRAM_SIZE
-#ifndef CONFIG_OPTEE
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-#endif
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M)
 
diff --git a/include/power/bd71837.h b/include/power/bd71837.h
new file mode 100644
index 00000000000..38c69b2b909
--- /dev/null
+++ b/include/power/bd71837.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (C) 2018 ROHM Semiconductors */
+
+#ifndef BD71837_H_
+#define BD71837_H_
+
+#define BD71837_REGULATOR_DRIVER "bd71837_regulator"
+
+enum {
+	BD71837_REV		= 0x00,
+	BD71837_SWRESET		= 0x01,
+	BD71837_I2C_DEV		= 0x02,
+	BD71837_PWRCTRL0	= 0x03,
+	BD71837_PWRCTRL1	= 0x04,
+	BD71837_BUCK1_CTRL	= 0x05,
+	BD71837_BUCK2_CTRL	= 0x06,
+	BD71837_BUCK3_CTRL	= 0x07,
+	BD71837_BUCK4_CTRL	= 0x08,
+	BD71837_BUCK5_CTRL	= 0x09,
+	BD71837_BUCK6_CTRL	= 0x0a,
+	BD71837_BUCK7_CTRL	= 0x0b,
+	BD71837_BUCK8_CTRL	= 0x0c,
+	BD71837_BUCK1_VOLT_RUN	= 0x0d,
+	BD71837_BUCK1_VOLT_IDLE	= 0x0e,
+	BD71837_BUCK1_VOLT_SUSP	= 0x0f,
+	BD71837_BUCK2_VOLT_RUN	= 0x10,
+	BD71837_BUCK2_VOLT_IDLE	= 0x11,
+	BD71837_BUCK3_VOLT_RUN	= 0x12,
+	BD71837_BUCK4_VOLT_RUN	= 0x13,
+	BD71837_BUCK5_VOLT	= 0x14,
+	BD71837_BUCK6_VOLT	= 0x15,
+	BD71837_BUCK7_VOLT	= 0x16,
+	BD71837_BUCK8_VOLT	= 0x17,
+	BD71837_LDO1_VOLT	= 0x18,
+	BD71837_LDO2_VOLT	= 0x19,
+	BD71837_LDO3_VOLT	= 0x1a,
+	BD71837_LDO4_VOLT	= 0x1b,
+	BD71837_LDO5_VOLT	= 0x1c,
+	BD71837_LDO6_VOLT	= 0x1d,
+	BD71837_LDO7_VOLT	= 0x1e,
+	BD71837_TRANS_COND0	= 0x1f,
+	BD71837_TRANS_COND1	= 0x20,
+	BD71837_VRFAULTEN	= 0x21,
+	BD71837_MVRFLTMASK0	= 0x22,
+	BD71837_MVRFLTMASK1	= 0x23,
+	BD71837_MVRFLTMASK2	= 0x24,
+	BD71837_RCVCFG		= 0x25,
+	BD71837_RCVNUM		= 0x26,
+	BD71837_PWRONCONFIG0	= 0x27,
+	BD71837_PWRONCONFIG1	= 0x28,
+	BD71837_RESETSRC	= 0x29,
+	BD71837_MIRQ		= 0x2a,
+	BD71837_IRQ		= 0x2b,
+	BD71837_IN_MON		= 0x2c,
+	BD71837_POW_STATE	= 0x2d,
+	BD71837_OUT32K		= 0x2e,
+	BD71837_REGLOCK		= 0x2f,
+	BD71837_MUXSW_EN	= 0x30,
+	BD71837_REG_NUM,
+};
+
+#endif