m68k: Remove M54455EVB board

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Angelo Durgehello <angelo.dureghello@timesys.com>
Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 356 deletions

diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
deleted file mode 100644
index f3621d6326e..00000000000
--- a/include/configs/M54455EVB.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Freescale MCF54455 EVB board.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M54455EVB_H
-#define _M54455EVB_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_M54455EVB	/* M54455EVB board */
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT		(0)
-
-#define LDS_BOARD_TEXT                  board/freescale/m54455evb/sbf_dram_init.o (.text*)
-
-#undef CONFIG_WATCHDOG
-
-#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* Network configuration */
-#ifdef CONFIG_MCFFEC
-#	define CONFIG_MII_INIT		1
-#	define CONFIG_SYS_DISCOVER_PHY
-#	define CONFIG_SYS_RX_ETH_BUFFER	8
-#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#	define CONFIG_HAS_ETH1
-#	define CONFIG_ETHPRIME		"FEC0"
-#	define CONFIG_IPADDR		192.162.1.2
-#	define CONFIG_NETMASK		255.255.255.0
-#	define CONFIG_SERVERIP		192.162.1.1
-#	define CONFIG_GATEWAYIP		192.162.1.1
-
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CONFIG_SYS_DISCOVER_PHY
-#		define FECDUPLEX	FULL
-#		define FECSPEED		_100BASET
-#	else
-#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#		endif
-#	endif			/* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-#define CONFIG_HOSTNAME		"M54455EVB"
-#ifdef CONFIG_SYS_STMICRO_BOOT
-/* ST Micro serial flash */
-#define	CONFIG_SYS_LOAD_ADDR2		0x40010013
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=0x40010000\0"			\
-	"sbfhdr=sbfhdr.bin\0"			\
-	"uboot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr} ${sbfhdr};"	\
-	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
-	"upd=run load; run prog\0"		\
-	"prog=sf probe 0:1 1000000 3;"		\
-	"sf erase 0 30000;"			\
-	"sf write ${loadaddr} 0 0x30000;"	\
-	"save\0"				\
-	""
-#else
-/* Atmel and Intel */
-#ifdef CONFIG_SYS_ATMEL_BOOT
-#	define CONFIG_SYS_UBOOT_END	0x0403FFFF
-#elif defined(CONFIG_SYS_INTEL_BOOT)
-#	define CONFIG_SYS_UBOOT_END	0x3FFFF
-#endif
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=0x40010000\0"			\
-	"uboot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr} ${uboot}\0"	\
-	"upd=run load; run prog\0"		\
-	"prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE)	\
-	" " __stringify(CONFIG_SYS_UBOOT_END) ";"		\
-	"era " __stringify(CONFIG_SYS_FLASH_BASE) " "		\
-	__stringify(CONFIG_SYS_UBOOT_END) ";"			\
-	"cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE)	\
-	" ${filesize}; save\0"			\
-	""
-#endif
-
-/* ATA configuration */
-#define CONFIG_IDE_RESET	1
-#define CONFIG_IDE_PREINIT	1
-#define CONFIG_ATAPI
-#undef CONFIG_LBA48
-
-#define CONFIG_SYS_IDE_MAXBUS		1
-#define CONFIG_SYS_IDE_MAXDEVICE	2
-
-#define CONFIG_SYS_ATA_BASE_ADDR	0x90000000
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0
-
-#define CONFIG_SYS_ATA_DATA_OFFSET	0xA0	/* Offset for data I/O                            */
-#define CONFIG_SYS_ATA_REG_OFFSET	0xA0	/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_ALT_OFFSET	0xC0	/* Offset for alternate registers           */
-#define CONFIG_SYS_ATA_STRIDE		4	/* Interval between registers                 */
-
-/* Realtime clock */
-#define CONFIG_MCFRTC
-#undef RTC_DEBUG
-#define CONFIG_SYS_RTC_OSCILLATOR	(32 * CONFIG_SYS_HZ)
-
-/* Timer */
-#define CONFIG_MCFTMR
-
-/* I2c */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
-
-/* DSPI and Serial Flash */
-#define CONFIG_CF_DSPI
-#define CONFIG_SYS_SBFHDR_SIZE		0x13
-
-/* PCI */
-#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
-
-#define CONFIG_SYS_PCI_CACHE_LINE_SIZE	4
-
-#define CONFIG_SYS_PCI_MEM_BUS		0xA0000000
-#define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BUS
-#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000
-
-#define CONFIG_SYS_PCI_IO_BUS		0xB1000000
-#define CONFIG_SYS_PCI_IO_PHYS		CONFIG_SYS_PCI_IO_BUS
-#define CONFIG_SYS_PCI_IO_SIZE		0x01000000
-
-#define CONFIG_SYS_PCI_CFG_BUS		0xB0000000
-#define CONFIG_SYS_PCI_CFG_PHYS	CONFIG_SYS_PCI_CFG_BUS
-#define CONFIG_SYS_PCI_CFG_SIZE	0x01000000
-#endif
-
-/* FPGA - Spartan 2 */
-/* experiment
-#define CONFIG_FPGA_COUNT	1
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-#define CONFIG_SYS_FPGA_CHECK_CTRLC
-*/
-
-/* Input, PCI, Flexbus, and VCO */
-#define CONFIG_EXTRA_CLOCK
-
-#define CONFIG_PRAM		2048	/* 2048 KB */
-
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
-
-#define CONFIG_SYS_MBAR		0xFC000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
-#define CONFIG_SYS_INIT_RAM_SIZE		0x8000	/* Size of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL	0x221
-#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define CONFIG_SYS_SDRAM_BASE1		0x48000000
-#define CONFIG_SYS_SDRAM_SIZE		256	/* SDRAM size in MB */
-#define CONFIG_SYS_SDRAM_CFG1		0x65311610
-#define CONFIG_SYS_SDRAM_CFG2		0x59670000
-#define CONFIG_SYS_SDRAM_CTRL		0xEA0B2000
-#define CONFIG_SYS_SDRAM_EMOD		0x40010000
-#define CONFIG_SYS_SDRAM_MODE		0x00010033
-#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0xAA
-
-#ifdef CONFIG_CF_SBF
-#	define CONFIG_SERIAL_BOOT
-#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_TEXT_BASE + 0x400)
-#else
-#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-
-/* Reserve 256 kB for malloc() */
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-/* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-
-/*
- * Configuration for environment
- * Environment is not embedded in u-boot. First time runing may have env
- * crc error warning if there is no correct environment on the flash.
- */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#ifdef CONFIG_SYS_STMICRO_BOOT
-#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS1_BASE
-#endif
-#ifdef CONFIG_SYS_ATMEL_BOOT
-#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_CS1_BASE
-#endif
-#ifdef CONFIG_SYS_INTEL_BOOT
-#	define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
-#	define CONFIG_SYS_FLASH1_BASE		CONFIG_SYS_CS1_BASE
-#endif
-
-#ifdef CONFIG_SYS_FLASH_CFI
-
-#	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
-#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
-#	define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
-#	define CONFIG_SYS_FLASH_CHECKSUM
-#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
-#	define CONFIG_FLASH_CFI_LEGACY
-
-#ifdef CONFIG_FLASH_CFI_LEGACY
-#	define CONFIG_SYS_ATMEL_REGION		4
-#	define CONFIG_SYS_ATMEL_TOTALSECT	11
-#	define CONFIG_SYS_ATMEL_SECT		{1, 2, 1, 7}
-#	define CONFIG_SYS_ATMEL_SECTSZ		{0x4000, 0x2000, 0x8000, 0x10000}
-#endif
-#endif
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-#ifdef CONFIG_CMD_JFFS2
-#ifdef CF_STMICRO_BOOT
-#	define CONFIG_JFFS2_DEV		"nor1"
-#	define CONFIG_JFFS2_PART_SIZE	0x01000000
-#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH2_BASE + 0x500000)
-#endif
-#ifdef CONFIG_SYS_ATMEL_BOOT
-#	define CONFIG_JFFS2_DEV		"nor1"
-#	define CONFIG_JFFS2_PART_SIZE	0x01000000
-#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH1_BASE + 0x500000)
-#endif
-#ifdef CONFIG_SYS_INTEL_BOOT
-#	define CONFIG_JFFS2_DEV		"nor0"
-#	define CONFIG_JFFS2_PART_SIZE	(0x01000000 - 0x500000)
-#	define CONFIG_JFFS2_PART_OFFSET	(CONFIG_SYS_FLASH0_BASE + 0x500000)
-#endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE		16
-
-#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
-#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
-#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
-					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
-					 CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
-					 CF_CACR_ICINVA | CF_CACR_EUSP)
-#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
-					 CF_CACR_DEC | CF_CACR_DDCM_P | \
-					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
-
-/*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-/*
- * CS0 - NOR Flash 1, 2, 4, or 8MB
- * CS1 - CompactFlash and registers
- * CS2 - CPLD
- * CS3 - FPGA
- * CS4 - Available
- * CS5 - Available
- */
-
-#if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT)
- /* Atmel Flash */
-#define CONFIG_SYS_CS0_BASE		0x04000000
-#define CONFIG_SYS_CS0_MASK		0x00070001
-#define CONFIG_SYS_CS0_CTRL		0x00001140
-/* Intel Flash */
-#define CONFIG_SYS_CS1_BASE		0x00000000
-#define CONFIG_SYS_CS1_MASK		0x01FF0001
-#define CONFIG_SYS_CS1_CTRL		0x00000D60
-
-#define CONFIG_SYS_ATMEL_BASE		CONFIG_SYS_CS0_BASE
-#else
-/* Intel Flash */
-#define CONFIG_SYS_CS0_BASE		0x00000000
-#define CONFIG_SYS_CS0_MASK		0x01FF0001
-#define CONFIG_SYS_CS0_CTRL		0x00000D60
- /* Atmel Flash */
-#define CONFIG_SYS_CS1_BASE		0x04000000
-#define CONFIG_SYS_CS1_MASK		0x00070001
-#define CONFIG_SYS_CS1_CTRL		0x00001140
-
-#define CONFIG_SYS_ATMEL_BASE		CONFIG_SYS_CS1_BASE
-#endif
-
-/* CPLD */
-#define CONFIG_SYS_CS2_BASE		0x08000000
-#define CONFIG_SYS_CS2_MASK		0x00070001
-#define CONFIG_SYS_CS2_CTRL		0x003f1140
-
-/* FPGA */
-#define CONFIG_SYS_CS3_BASE		0x09000000
-#define CONFIG_SYS_CS3_MASK		0x00070001
-#define CONFIG_SYS_CS3_CTRL		0x00000020
-
-#endif				/* _M54455EVB_H */