board: synquacer: Add DeveloperBox 96boards EE support

Add the DeveloperBox 96boards EE support. This board is also
known as Socionext SynQuacer E-Series. It contians one "SC2A11"
SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots,
3 PCIe slots (1 4x port and 2 1x ports which are expanded via
PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA
ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard
MicroATX Form Factor.

For more information, see this page;
  https://www.96boards.org/product/developerbox/

Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>

1 files changed, 109 insertions, 0 deletions

diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
new file mode 100644
index 00000000000..0dab4de1f18
--- /dev/null
+++ b/include/configs/synquacer.h
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016-2017 Socionext Inc.
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Timers for fasp(TIMCLK) */
+#define CONFIG_SYS_HZ			1000		/* 1 msec */
+#define CONFIG_SYS_TIMERBASE		0x31080000	/* AP Timer 1 (ARM-SP804) */
+
+/*
+ * SDRAM (for initialize)
+ */
+#define CONFIG_SYS_SDRAM_BASE		(0x80000000)	/* Start address of DDR3 */
+#define PHYS_SDRAM_SIZE			(0x7c000000)	/* Default size (2GB - Secure memory) */
+
+#define CONFIG_VERY_BIG_RAM				/* SynQuacer supports up to 64GB */
+#define CONFIG_MAX_MEM_MAPPED		PHYS_SDRAM_SIZE
+
+#define SQ_DRAMINFO_BASE		(0x2e00ffc0)	/* DRAM info from TF-A */
+
+/*
+ * Boot info
+ */
+#define CONFIG_SYS_INIT_SP_ADDR		(0xe0000000)	/* stack of init proccess */
+#define CONFIG_SYS_MALLOC_LEN		(0x01000000)	/* 16Mbyte size of malloc() */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE /* default kernel load address */
+
+/*
+ * Hardware drivers support
+ */
+
+/* RTC */
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51
+
+/* Serial (pl011)       */
+#define UART_CLK			(62500000)
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK		UART_CLK
+#define CONFIG_PL01x_PORTS		{(void *)(0x2a400000)}
+
+#define CONFIG_ENV_OVERWRITE		/* ethaddr can be reprogrammed */
+
+/* Support MTD */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_FLASH_BASE		(0x08000000)
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE}
+
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + (512 * 1024))
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200, 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_CBSIZE		1024
+#define CONFIG_SYS_MAXARGS		128
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
+/* #define CONFIG_SYS_PCI_64BIT		1 */
+
+/* Distro boot settings */
+#ifndef CONFIG_SPL_BUILD
+#ifdef CONFIG_CMD_USB
+#define BOOT_TARGET_DEVICE_USB(func)	func(USB, usb, 0)
+#else
+#define BOOT_TARGET_DEVICE_USB(func)
+#endif
+
+#ifdef CONFIG_CMD_MMC
+#define BOOT_TARGET_DEVICE_MMC(func)	func(MMC, mmc, 0)
+#else
+#define BOOT_TARGET_DEVICE_MMC(func)
+#endif
+
+#ifdef CONFIG_CMD_NVME
+#define BOOT_TARGET_DEVICE_NVME(func)	func(NVME, nvme, 0)
+#else
+#define BOOT_TARGET_DEVICE_NVME(func)
+#endif
+
+#ifdef CONFIG_CMD_SCSI
+#define BOOT_TARGET_DEVICE_SCSI(func)	func(SCSI, scsi, 0) func(SCSI, scsi, 1)
+#else
+#define BOOT_TARGET_DEVICE_SCSI(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func)	\
+	BOOT_TARGET_DEVICE_USB(func)	\
+	BOOT_TARGET_DEVICE_MMC(func)	\
+	BOOT_TARGET_DEVICE_SCSI(func)	\
+	BOOT_TARGET_DEVICE_NVME(func)	\
+
+#include <config_distro_bootcmd.h>
+#else /* CONFIG_SPL_BUILD */
+#define BOOTENV
+#endif
+
+#define	CONFIG_EXTRA_ENV_SETTINGS		\
+	"fdt_addr_r=0x9fe00000\0"		\
+	"kernel_addr_r=0x90000000\0"		\
+	"ramdisk_addr_r=0xa0000000\0"		\
+	"scriptaddr=0x88000000\0"		\
+	"pxefile_addr_r=0x88100000\0"		\
+	BOOTENV
+
+#endif /* __CONFIG_H */