synchronizition with mainline

3 files changed, 58 insertions, 73 deletions

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 74fe88867ea..7eeae708a72 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2007 Czech Technical University.
  *
- * Michal SIMEK <monstr@monstr.eu>
+ * Michal SIMEK <monstr@seznam.cz>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -32,7 +32,6 @@
 #define	CONFIG_ML401		1	/* ML401 Board */
 
 /* uart */
-#define	XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
@@ -87,7 +86,7 @@
  * 0x11FB_F000	CFG_MONITOR_BASE
  *					MONITOR_CODE	256kB	Env
  * 0x13FF_F000	CFG_GBL_DATA_OFFSET
- *					GLOBAL_DATA	4kB	bd, gd
+ * 					GLOBAL_DATA	4kB	bd, gd
  * 0x1400_0000	CFG_SDRAM_BASE + CFG_SDRAM_SIZE
  */
 
@@ -100,7 +99,7 @@
 /* global pointer */
 #define	CFG_GBL_DATA_SIZE	0x1000	/* size of global data */
 /* start of global data */
-#define	CFG_GBL_DATA_OFFSET	(CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define	CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
 
 /* monitor code */
 #define	SIZE			0x40000
@@ -146,16 +145,6 @@
 	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
 #endif /* !FLASH */
 
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
-	#define	CONFIG_SYSTEMACE
-	/* #define DEBUG_SYSTEMACE */
-	#define	SYSTEMACE_CONFIG_FPGA
-	#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-	#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
-	#define	CONFIG_DOS_PARTITION
-#endif
-
 /*
  * BOOTP options
  */
@@ -164,21 +153,28 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
+
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_BDI
 #define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IMI
 #define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
 #define CONFIG_CMD_MFSL
+#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-
-#if defined(CONFIG_SYSTEMACE)
-	#define CONFIG_CMD_EXT2
-	#define CONFIG_CMD_FAT
-#endif
+#define CONFIG_CMD_RUN
 
 #if defined(FLASH)
 	#define CONFIG_CMD_ECHO
@@ -190,8 +186,6 @@
 		#define CONFIG_CMD_ENV
 		#define CONFIG_CMD_SAVES
 	#endif
-#else
-	#undef CONFIG_CMD_FLASH
 #endif
 
 #if defined(CONFIG_CMD_JFFS2)
@@ -216,16 +210,24 @@
 #define	CONFIG_BOOTDELAY	30
 #define	CONFIG_BOOTARGS		"root=romfs"
 #define	CONFIG_HOSTNAME		"ml401"
-#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
+#define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
-#define	CONFIG_SERVERIP		192.168.0.5
-#define	CONFIG_GATEWAYIP	192.168.0.1
+#define	CONFIG_SERVERIP 	192.168.0.5
+#define	CONFIG_GATEWAYIP 	192.168.0.1
 #define	CONFIG_ETHADDR		00:E0:0C:00:00:FD
 
 /* architecture dependent code */
 #define	CFG_USR_EXCEP	/* user exception */
 #define CFG_HZ	1000
 
+/* system ace */
+#define	CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+#define	SYSTEMACE_CONFIG_FPGA
+#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+#define	CONFIG_DOS_PARTITION
+
 #define	CONFIG_PREBOOT		"echo U-BOOT for ML401;setenv preboot;echo"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" /* hardware flash protection */\
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 9a2eec1bb2a..08ac9cbd58b 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -48,7 +48,6 @@
 #define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 #define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - (1024 * 1024))
 
-#define XILINX_UARTLITE
 #define CONFIG_BAUDRATE		115200
 #define CFG_BAUDRATE_TABLE	{ 115200 }
 
@@ -56,16 +55,21 @@
 #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_ENV
-#undef CONFIG_CMD_MEMORY
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_MISC
 
 #define CFG_UART1_BASE		(0xFFFF2000)
 #define CONFIG_SERIAL_BASE	CFG_UART1_BASE
@@ -104,6 +108,4 @@
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define XILINX_CLOCK_FREQ	50000000
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index 006a132881d..35001d7ada3 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -31,34 +31,13 @@
 #define	CONFIG_XUPV2P		1
 
 /* uart */
-#ifdef XILINX_UARTLITE_BASEADDR
-#define	XILINX_UARTLITE
-#define	CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
-#define	CONFIG_BAUDRATE		XILINX_UARTLITE_BAUDRATE
+#define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
+#define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-#else
-#ifdef XILINX_UART16550_BASEADDR
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	4
-#define CONFIG_CONS_INDEX	1
-#define CFG_NS16550_COM1	XILINX_UART16550_BASEADDR
-#define CFG_NS16550_CLK		XILINX_UART16550_CLOCK_HZ
-
-#define	CONFIG_BAUDRATE		115200
-#define	CFG_BAUDRATE_TABLE	{ 9600, 115200 }
-#endif
-#endif
 
 /* ethernet */
-#ifdef XILINX_EMAC_BASEADDR
-#define XILINX_EMAC	1
-#else
-#ifdef XILINX_EMACLITE_BASEADDR
-#define XILINX_EMACLITE	1
-#endif
-#endif
-#undef ET_DEBUG
+#define CONFIG_EMAC	1
+#define XPAR_EMAC_0_DEVICE_ID	XPAR_XEMAC_NUM_INSTANCES
 
 /*
  * setting reset address
@@ -69,13 +48,11 @@
  * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
  * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
  */
-/* #define	CFG_RESET_ADDRESS	0x36000000 */
+#define	CFG_RESET_ADDRESS	0x36000000
 
 /* gpio */
-#ifdef XILINX_GPIO_BASEADDR
 #define	CFG_GPIO_0		1
 #define	CFG_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
-#endif
 
 /* interrupt controller */
 #define	CFG_INTC_0		1
@@ -142,6 +119,7 @@
 #define	CFG_ENV_SIZE		0x1000
 #define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
 
+
 /*
  * BOOTP options
  */
@@ -150,24 +128,29 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
+
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_PING
 
-#ifdef XILINX_SYSACE_BASEADDR
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#endif
 
 /* Miscellaneous configurable options */
 #define	CFG_PROMPT	"U-Boot-mONStR> "
@@ -179,7 +162,7 @@
 
 #define	CONFIG_BOOTDELAY 	30
 #define	CONFIG_BOOTARGS		"root=romfs"
-#define	CONFIG_HOSTNAME		"xupv2p"
+#define	CONFIG_HOSTNAME		"ml401"
 #define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
 #define	CONFIG_SERVERIP 	192.168.0.5
@@ -195,13 +178,11 @@
 	"echo"
 
 /* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
 #define	CONFIG_SYSTEMACE
 /* #define DEBUG_SYSTEMACE */
 #define	SYSTEMACE_CONFIG_FPGA
 #define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
 #define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
 #define	CONFIG_DOS_PARTITION
-#endif
 
 #endif	/* __CONFIG_H */