Patch by Yuli Barcohen, 20 May 2004:

Add support for Interphase iSPAN boards.

1 files changed, 344 insertions, 0 deletions

diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
new file mode 100644
index 00000000000..9ec1c0834b8
--- /dev/null
+++ b/include/configs/ISPAN.h
@@ -0,0 +1,344 @@
+/*
+ * Copyright (C) 2004 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * Support for Interphase iSPAN Communications Controllers
+ * (453x and others). Tested on 4532.
+ *
+ * Derived from iSPAN 4539 port (iphase4539) by
+ * Wolfgang Grandegger <wg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MPC8260			/* This is an MPC8260 CPU               */
+#define CONFIG_ISPAN			/* ...on one of Interphase iSPAN boards */
+
+/*-----------------------------------------------------------------------
+ * Select serial console configuration
+ *
+ * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * If CONFIG_CONS_NONE is defined, then the serial console routines must be
+ * defined elsewhere (for example, on the cogent platform, there are serial
+ * ports on the motherboard which are used for the serial console - see
+ * cogent/cma101/serial.[ch]).
+ */
+#define	CONFIG_CONS_ON_SMC		/* Define if console on SMC		*/
+#undef	CONFIG_CONS_ON_SCC		/* Define if console on SCC		*/
+#undef	CONFIG_CONS_NONE		/* Define if console on something else	*/
+#define CONFIG_CONS_INDEX	1	/* Which serial channel for console	*/
+
+/*-----------------------------------------------------------------------
+ * Select Ethernet configuration
+ *
+ * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC).
+ *
+ * If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must
+ * be defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+#undef	CONFIG_ETHER_ON_SCC		/* Define if Ethernet on SCC		*/
+#define CONFIG_ETHER_ON_FCC		/* Define if Ethernet on FCC		*/
+#undef	CONFIG_ETHER_NONE		/* Define if Ethernet on something else */
+#define CONFIG_ETHER_INDEX	3	/* Which channel for Ethernrt		*/
+
+#ifdef CONFIG_ETHER_ON_FCC
+
+#if CONFIG_ETHER_INDEX == 3
+
+#define CFG_PHY_ADDR		0
+#define CFG_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
+#define CFG_CMXFCR_MASK		(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
+
+#endif /* CONFIG_ETHER_INDEX == 3 */
+
+#define CFG_CPMFCR_RAMTYPE	0
+#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+
+#define CONFIG_MII				/* MII PHY management		*/
+#define CONFIG_BITBANGMII			/* Bit-bang MII PHY management	*/
+/*
+ * GPIO pins used for bit-banged MII communications
+ */
+#define MDIO_PORT		3		/* Port D */
+
+#define CFG_MDIO_PIN		0x00040000	/* PD13 */
+#define CFG_MDC_PIN		0x00080000	/* PD12 */
+
+#define MDIO_ACTIVE		(iop->pdir |=  CFG_MDIO_PIN)
+#define MDIO_TRISTATE		(iop->pdir &= ~CFG_MDIO_PIN)
+#define MDIO_READ		((iop->pdat &  CFG_MDIO_PIN) != 0)
+
+#define MDIO(bit)		if(bit) iop->pdat |=  CFG_MDIO_PIN; \
+				else	iop->pdat &= ~CFG_MDIO_PIN
+
+#define MDC(bit)		if(bit) iop->pdat |=  CFG_MDC_PIN; \
+				else	iop->pdat &= ~CFG_MDC_PIN
+
+#define MIIDELAY		udelay(1)
+
+#endif /* CONFIG_ETHER_ON_FCC */
+
+#define CONFIG_8260_CLKIN	65536000	/* in Hz */
+#define CONFIG_BAUDRATE		38400
+
+#define CONFIG_COMMANDS		( CONFIG_CMD_DFL  \
+				| CFG_CMD_ASKENV  \
+				| CFG_CMD_DHCP    \
+				| CFG_CMD_ECHO    \
+				| CFG_CMD_IMMAP   \
+				| CFG_CMD_MII     \
+				| CFG_CMD_PING    \
+				| CFG_CMD_REGINFO \
+				)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds	*/
+#define CONFIG_BOOTCOMMAND	"bootm fe010000"	/* autoboot command	*/
+#define CONFIG_BOOTARGS		"root=/dev/ram rw"
+
+#define CONFIG_BZIP2		/* Include support for bzip2 compressed images  */
+#undef	CONFIG_WATCHDOG		/* Disable platform specific watchdog		*/
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ */
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#define CFG_LONGHELP				/* #undef to save memory	*/
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)  /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* Max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on		*/
+#define CFG_MEMTEST_END		0x03B00000	/* 1 ... 59 MB in SDRAM		*/
+
+#define CFG_LOAD_ADDR		0x100000	/* Default load address		*/
+
+#define CFG_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CFG_RESET_ADDRESS	0x09900000
+
+#define CONFIG_MISC_INIT_R			/* We need misc_init_r()	*/
+
+/*-----------------------------------------------------------------------
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor   */
+#ifdef CONFIG_BZIP2
+#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()    */
+#else
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
+#endif /* CONFIG_BZIP2 */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_BASE		0xFE000000
+#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
+#define CFG_MAX_FLASH_BANKS	1		/* Max num of memory banks	*/
+#define CFG_MAX_FLASH_SECT	142		/* Max num of sects on one chip */
+
+/* Environment is in flash, there is little space left in Serial EEPROM */
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x10000 	/* We use one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Hard Reset Configuration Words
+ *
+ * If you change bits in the HRCW, you must also change the CFG_*
+ * defines for the various registers affected by the HRCW e.g. changing
+ * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
+ */
+/* 0x1686B245 */
+#define CFG_HRCW_MASTER (HRCW_EBM      | HRCW_BPS01       | HRCW_CIP    |\
+			 HRCW_L2CPC10  | HRCW_ISB110                    |\
+			 HRCW_BMS      | HRCW_MMR11       | HRCW_APPC10 |\
+			 HRCW_CS10PC01 | HRCW_MODCK_H0101                \
+			)
+/* No slaves */
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
+
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xF0F00000
+#ifdef CFG_REV_B
+#define CFG_DEFAULT_IMMR	0xFF000000
+#endif /* CFG_REV_B */
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	128  /* Size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from flash	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU			*/
+
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers		2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT		(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
+				HID0_IFEM|HID0_ABE)
+#define CFG_HID0_FINAL		(HID0_ICE|HID0_IFEM|HID0_ABE)
+#define CFG_HID2		0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register					 5-5
+ *-----------------------------------------------------------------------
+ * turn on Checkstop Reset Enable
+ */
+#define CFG_RMR			RMR_CSRE
+
+/*-----------------------------------------------------------------------
+ * BCR - Bus Configuration					 4-25
+ *-----------------------------------------------------------------------
+ */
+#define CFG_BCR			0xA01C0000
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				 4-31
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SIUMCR		0x42250000/* 0x4205C000 */
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				 4-35
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#if defined (CONFIG_WATCHDOG)
+#define CFG_SYPCR		(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+				SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
+#else
+#define CFG_SYPCR		(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+				SYPCR_SWRI|SYPCR_SWP)
+#endif /* CONFIG_WATCHDOG */
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control			 4-40
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ *-----------------------------------------------------------------------
+ */
+#define CFG_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control					 9-8
+ *-----------------------------------------------------------------------
+ * Ensure DFBRG is Divide by 16
+ */
+#define CFG_SCCR		SCCR_DFBRG01
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration				13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR		0
+
+/*-----------------------------------------------------------------------
+ * Init Memory Controller:
+ *
+ * Bank Bus	Machine PortSize                        Device
+ * ---- ---	------- -----------------------------   ------
+ *  0	60x	GPCM	 8 bit (Rev.B)/16 bit (Rev.D)   Flash
+ *  1	60x	SDRAM	64 bit                          SDRAM
+ *  2	Local	SDRAM	32 bit	                        SDRAM
+ */
+#define CFG_USE_FIRMWARE	/* If defined - do not initialise memory
+				   controller, rely on initialisation
+				   performed by the Interphase boot firmware.
+				 */
+
+#define CFG_OR0_PRELIM		0xFE000882
+#ifdef CFG_REV_B
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BRx_PS_8  | BRx_V)
+#else  /* Rev. D */
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BRx_PS_16 | BRx_V)
+#endif /* CFG_REV_B */
+
+#define CFG_MPTPR		0x7F00
+
+/* Please note that 60x SDRAM MUST start at 0 */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_60x_BR		0x00000041
+#define CFG_60x_OR		0xF0002CD0
+#define CFG_PSDMR		0x0049929A
+#define CFG_PSRT		0x07
+
+#define CFG_LSDRAM_BASE		0xF7000000
+#define CFG_LOC_BR		0x00001861
+#define CFG_LOC_OR		0xFF803280
+#define CFG_LSDMR		0x8285A552
+#define CFG_LSRT		0x07
+
+#endif /* __CONFIG_H */