arm: Remove warp board

This board is missing migration to CONFIG_DM, which had a deadline of
v2020.01, which is now more than 2 years passed due.  Remove it.

Cc: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 112 deletions

diff --git a/include/configs/warp.h b/include/configs/warp.h
deleted file mode 100644
index d2c4391935e..00000000000
--- a/include/configs/warp.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2014 O.S. Systems Software LTDA.
- * Copyright (C) 2014 Kynetics LLC.
- * Copyright (C) 2014 Revolution Robotics, Inc.
- *
- * Author: Otavio Salvador <otavio@ossystems.com.br>
- *
- * Configuration settings for the WaRP Board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "mx6_common.h"
-
-#define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
-
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
-
-/* Watchdog */
-
-/* Physical Memory Map */
-#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-/* VDD voltage 1.65 - 1.95 */
-#define CONFIG_SYS_SD_VOLTAGE		0x00000080
-
-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS		0
-#endif
-
-#define CONFIG_USBD_HS
-
-#define DFU_DEFAULT_POLL_TIMEOUT 300
-
-/* I2C Configs */
-
-/* PMIC */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=zImage\0" \
-	"console=ttymxc0\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
-	"fdt_file=imx6sl-warp.dtb\0" \
-	"fdt_addr=0x88000000\0" \
-	"initrd_addr=0x83800000\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
-	"mmcdev=0\0" \
-	"mmcpart=1\0" \
-	"finduuid=part uuid mmc 0:2 uuid\0" \
-	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=PARTUUID=${uuid} rootwait rw\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run finduuid; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-		"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0"
-
-#endif				/* __CONFIG_H */