arm: Remove mx31pdk board

DM, OF_CONTROL, DM_SPI and other driver model migration
deadlines are expired for this board.

Remove it.

Acked-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

1 files changed, 0 insertions, 141 deletions

diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
deleted file mode 100644
index f910d6199b2..00000000000
--- a/include/configs/mx31pdk.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com>
- *
- * (C) Copyright 2004
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Kshitij Gupta <kshitij@ti.com>
- *
- * Configuration settings for the Freescale i.MX31 PDK board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
-/* High Level Configuration Options */
-#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_MACH_TYPE	MACH_TYPE_MX31_3DS
-
-#define CONFIG_SPL_TARGET	"u-boot-with-spl.bin"
-#define CONFIG_SPL_MAX_SIZE	2048
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(2*CONFIG_ENV_SIZE + 2 * 128 * 1024)
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE	UART1_BASE
-
-/* PMIC Controller */
-#define CONFIG_POWER
-#define CONFIG_POWER_SPI
-#define CONFIG_POWER_FSL
-#define CONFIG_FSL_PMIC_BUS	1
-#define CONFIG_FSL_PMIC_CS	2
-#define CONFIG_FSL_PMIC_CLK	1000000
-#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_FSL_PMIC_BITLEN	32
-#define CONFIG_RTC_MC13XXX
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"bootargs_base=setenv bootargs console=ttymxc0,115200\0"	\
-	"bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "	\
-		"ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"	\
-	"bootcmd=run bootcmd_net\0"					\
-	"bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "	\
-		"tftpboot 0x81000000 uImage-mx31; bootm\0"		\
-	"prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; "		\
-		"nand erase 0x0 0x40000; "				\
-		"nand write 0x81000000 0x0 0x40000\0"
-
-/*
- * Miscellaneous configurable options
- */
-
-/* memtest works on */
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR		0x81000000
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define PHYS_SDRAM_1		CSD0_BASE
-#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-						GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_INIT_RAM_ADDR + \
-						CONFIG_SYS_INIT_RAM_SIZE)
-
-/*
- * environment organization
- */
-
-/*
- * NAND driver
- */
-#define CONFIG_MXC_NAND_REGS_BASE      NFC_BASE_ADDR
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_NAND_LARGEPAGE
-
-/* NAND configuration for the NAND_SPL */
-
-/* Start copying real U-Boot from the second page */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x3f800
-/* Load U-Boot to this address */
-#define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
-
-#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
-
-/* Configuration of lowlevel_init.S (clocks and SDRAM) */
-#define CCM_CCMR_SETUP		0x074B0BF5
-#define CCM_PDR0_SETUP_532MHZ	(PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \
-				 PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) |    \
-				 PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) |    \
-				 PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0))
-#define CCM_MPCTL_SETUP_532MHZ	(PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) |  \
-				 PLL_MFN(12))
-
-#define ESDMISC_MDDR_SETUP	0x00000004
-#define ESDMISC_MDDR_RESET_DL	0x0000000c
-#define ESDCFG0_MDDR_SETUP	0x006ac73a
-
-#define ESDCTL_ROW_COL		(ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
-#define ESDCTL_SETTINGS		(ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
-				 ESDCTL_DSIZ(2) | ESDCTL_BL(1))
-#define ESDCTL_PRECHARGE	(ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
-#define ESDCTL_AUTOREFRESH	(ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
-#define ESDCTL_LOADMODEREG	(ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
-#define ESDCTL_RW		ESDCTL_SETTINGS
-
-#endif /* __CONFIG_H */