Remove obsoleted POST files.

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 631 deletions

diff --git a/post/ether.c b/post/ether.c
deleted file mode 100644
index 8c87b5927e1..00000000000
--- a/post/ether.c
+++ /dev/null
@@ -1,631 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*
- * Ethernet test
- *
- * The Serial Communication Controllers (SCC) listed in ctlr_list array below
- * are tested in the loopback ethernet mode.
- * The controllers are configured accordingly and several packets
- * are transmitted. The configurable test parameters are:
- *   MIN_PACKET_LENGTH - minimum size of packet to transmit
- *   MAX_PACKET_LENGTH - maximum size of packet to transmit
- *   TEST_NUM - number of tests
- */
-
-#ifdef CONFIG_POST
-
-#include <post.h>
-#if CONFIG_POST & CFG_POST_ETHER
-#if defined(CONFIG_8xx)
-#include <commproc.h>
-#elif defined(CONFIG_MPC8260)
-#include <asm/cpm_8260.h>
-#else
-#error "Apparently a bad configuration, please fix."
-#endif
-
-#include <command.h>
-#include <net.h>
-#include <serial.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define MIN_PACKET_LENGTH	64
-#define MAX_PACKET_LENGTH	256
-#define TEST_NUM		1
-
-#define CTLR_SCC 0
-
-extern void spi_init_f (void);
-extern void spi_init_r (void);
-
-/* The list of controllers to test */
-#if defined(CONFIG_MPC823)
-static int ctlr_list[][2] = { {CTLR_SCC, 1} };
-#else
-static int ctlr_list[][2] = { };
-#endif
-
-#define CTRL_LIST_SIZE (sizeof(ctlr_list) / sizeof(ctlr_list[0]))
-
-static struct {
-	void (*init) (int index);
-	void (*halt) (int index);
-	int (*send) (int index, volatile void *packet, int length);
-	int (*recv) (int index, void *packet, int length);
-} ctlr_proc[1];
-
-static char *ctlr_name[1] = { "SCC" };
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH  1520
-
-#define TX_BUF_CNT 2
-
-#define TOUT_LOOP 100
-
-static char txbuf[DBUF_LENGTH];
-
-static uint rxIdx;		/* index of the current RX buffer */
-static uint txIdx;		/* index of the current TX buffer */
-
-/*
-  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
-  *  immr->udata_bd address on Dual-Port RAM
-  * Provide for Double Buffering
-  */
-
-typedef volatile struct CommonBufferDescriptor {
-	cbd_t rxbd[PKTBUFSRX];		/* Rx BD */
-	cbd_t txbd[TX_BUF_CNT];		/* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx;
-
-  /*
-   * SCC callbacks
-   */
-
-static void scc_init (int scc_index)
-{
-	bd_t *bd = gd->bd;
-
-	static int proff[] =
-			{ PROFF_SCC1, PROFF_SCC2, PROFF_SCC3, PROFF_SCC4 };
-	static unsigned int cpm_cr[] =
-			{ CPM_CR_CH_SCC1, CPM_CR_CH_SCC2, CPM_CR_CH_SCC3,
-CPM_CR_CH_SCC4 };
-
-	int i;
-	scc_enet_t *pram_ptr;
-
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-
-	immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
-			~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-#if defined(CONFIG_FADS)
-#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC86xADS)
-	/* The FADS860T and MPC86xADS don't use the MODEM_EN or DATA_VOICE signals. */
-	*((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
-	*((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
-	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#else
-	*((uint *) BCSR4) &= ~(BCSR4_ETHLOOP | BCSR4_MODEM_EN);
-	*((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL | BCSR4_DATA_VOICE;
-	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#endif
-#endif
-
-	pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[proff[scc_index]]);
-
-	rxIdx = 0;
-	txIdx = 0;
-
-#ifdef CFG_ALLOC_DPRAM
-	rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
-					 dpram_alloc_align (sizeof (RTXBD), 8));
-#else
-	rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
-#endif
-
-#if 0
-
-#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
-	/* Configure port A pins for Txd and Rxd.
-	 */
-	immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
-	immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
-	immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
-#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
-	/* Configure port B pins for Txd and Rxd.
-	 */
-	immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
-	immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
-	immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
-#else
-#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
-#endif
-
-#if defined(PC_ENET_LBK)
-	/* Configure port C pins to disable External Loopback
-	 */
-	immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
-	immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
-	immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
-	immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK;	/* Disable Loopback */
-#endif /* PC_ENET_LBK */
-
-	/* Configure port C pins to enable CLSN and RENA.
-	 */
-	immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-	immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-	immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
-
-	/* Configure port A for TCLK and RCLK.
-	 */
-	immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
-	immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
-
-	/*
-	 * Configure Serial Interface clock routing -- see section 16.7.5.3
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-
-	immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
-	immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
-#else
-	/*
-	 * SCC2 receive clock is BRG2
-	 * SCC2 transmit clock is BRG3
-	 */
-	immr->im_cpm.cp_brgc2 = 0x0001000C;
-	immr->im_cpm.cp_brgc3 = 0x0001000C;
-
-	immr->im_cpm.cp_sicr &= ~0x00003F00;
-	immr->im_cpm.cp_sicr |=  0x00000a00;
-#endif /* 0 */
-
-
-	/*
-	 * Initialize SDCR -- see section 16.9.23.7
-	 * SDMA configuration register
-	 */
-	immr->im_siu_conf.sc_sdcr = 0x01;
-
-
-	/*
-	 * Setup SCC Ethernet Parameter RAM
-	 */
-
-	pram_ptr->sen_genscc.scc_rfcr = 0x18;	/* Normal Operation and Mot byte ordering */
-	pram_ptr->sen_genscc.scc_tfcr = 0x18;	/* Mot byte ordering, Normal access */
-
-	pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH;	/* max. ET package len 1520 */
-
-	pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]);	/* Set RXBD tbl start at Dual Port */
-	pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]);	/* Set TXBD tbl start at Dual Port */
-
-	/*
-	 * Setup Receiver Buffer Descriptors (13.14.24.18)
-	 * Settings:
-	 *     Empty, Wrap
-	 */
-
-	for (i = 0; i < PKTBUFSRX; i++) {
-		rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
-		rtx->rxbd[i].cbd_datlen = 0;	/* Reset */
-		rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
-	}
-
-	rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
-	/*
-	 * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
-	 * Settings:
-	 *    Add PADs to Short FRAMES, Wrap, Last, Tx CRC
-	 */
-
-	for (i = 0; i < TX_BUF_CNT; i++) {
-		rtx->txbd[i].cbd_sc =
-				(BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-		rtx->txbd[i].cbd_datlen = 0;	/* Reset */
-		rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
-	}
-
-	rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
-	/*
-	 * Enter Command:  Initialize Rx Params for SCC
-	 */
-
-	do {				/* Spin until ready to issue command    */
-		__asm__ ("eieio");
-	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-	/* Issue command */
-	immr->im_cpm.cp_cpcr =
-			((CPM_CR_INIT_RX << 8) | (cpm_cr[scc_index] << 4) |
-			 CPM_CR_FLG);
-	do {				/* Spin until command processed     */
-		__asm__ ("eieio");
-	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/*
-	 * Ethernet Specific Parameter RAM
-	 *     see table 13-16, pg. 660,
-	 *     pg. 681 (example with suggested settings)
-	 */
-
-	pram_ptr->sen_cpres = ~(0x0);	/* Preset CRC */
-	pram_ptr->sen_cmask = 0xdebb20e3;	/* Constant Mask for CRC */
-	pram_ptr->sen_crcec = 0x0;	/* Error Counter CRC (unused) */
-	pram_ptr->sen_alec = 0x0;	/* Alignment Error Counter (unused) */
-	pram_ptr->sen_disfc = 0x0;	/* Discard Frame Counter (unused) */
-	pram_ptr->sen_pads = 0x8888;	/* Short Frame PAD Characters */
-
-	pram_ptr->sen_retlim = 15;	/* Retry Limit Threshold */
-	pram_ptr->sen_maxflr = 1518;	/* MAX Frame Length Register */
-	pram_ptr->sen_minflr = 64;	/* MIN Frame Length Register */
-
-	pram_ptr->sen_maxd1 = DBUF_LENGTH;	/* MAX DMA1 Length Register */
-	pram_ptr->sen_maxd2 = DBUF_LENGTH;	/* MAX DMA2 Length Register */
-
-	pram_ptr->sen_gaddr1 = 0x0;	/* Group Address Filter 1 (unused) */
-	pram_ptr->sen_gaddr2 = 0x0;	/* Group Address Filter 2 (unused) */
-	pram_ptr->sen_gaddr3 = 0x0;	/* Group Address Filter 3 (unused) */
-	pram_ptr->sen_gaddr4 = 0x0;	/* Group Address Filter 4 (unused) */
-
-#define ea bd->bi_enetaddr
-	pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
-	pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
-	pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
-
-	pram_ptr->sen_pper = 0x0;	/* Persistence (unused) */
-	pram_ptr->sen_iaddr1 = 0x0;	/* Individual Address Filter 1 (unused) */
-	pram_ptr->sen_iaddr2 = 0x0;	/* Individual Address Filter 2 (unused) */
-	pram_ptr->sen_iaddr3 = 0x0;	/* Individual Address Filter 3 (unused) */
-	pram_ptr->sen_iaddr4 = 0x0;	/* Individual Address Filter 4 (unused) */
-	pram_ptr->sen_taddrh = 0x0;	/* Tmp Address (MSB) (unused) */
-	pram_ptr->sen_taddrm = 0x0;	/* Tmp Address (unused) */
-	pram_ptr->sen_taddrl = 0x0;	/* Tmp Address (LSB) (unused) */
-
-	/*
-	 * Enter Command:  Initialize Tx Params for SCC
-	 */
-
-	do {				/* Spin until ready to issue command    */
-		__asm__ ("eieio");
-	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-	/* Issue command */
-	immr->im_cpm.cp_cpcr =
-			((CPM_CR_INIT_TX << 8) | (cpm_cr[scc_index] << 4) |
-			 CPM_CR_FLG);
-	do {				/* Spin until command processed     */
-		__asm__ ("eieio");
-	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/*
-	 * Mask all Events in SCCM - we use polling mode
-	 */
-	immr->im_cpm.cp_scc[scc_index].scc_sccm = 0;
-
-	/*
-	 * Clear Events in SCCE -- Clear bits by writing 1's
-	 */
-
-	immr->im_cpm.cp_scc[scc_index].scc_scce = ~(0x0);
-
-
-	/*
-	 * Initialize GSMR High 32-Bits
-	 * Settings:  Normal Mode
-	 */
-
-	immr->im_cpm.cp_scc[scc_index].scc_gsmrh = 0;
-
-	/*
-	 * Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
-	 * Settings:
-	 *     TCI = Invert
-	 *     TPL =  48 bits
-	 *     TPP = Repeating 10's
-	 *     LOOP = Loopback
-	 *     MODE = Ethernet
-	 */
-
-	immr->im_cpm.cp_scc[scc_index].scc_gsmrl = (SCC_GSMRL_TCI |
-						    SCC_GSMRL_TPL_48 |
-						    SCC_GSMRL_TPP_10 |
-						    SCC_GSMRL_DIAG_LOOP |
-						    SCC_GSMRL_MODE_ENET);
-
-	/*
-	 * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
-	 */
-
-	immr->im_cpm.cp_scc[scc_index].scc_dsr = 0xd555;
-
-	/*
-	 * Initialize the PSMR
-	 * Settings:
-	 *  CRC = 32-Bit CCITT
-	 *  NIB = Begin searching for SFD 22 bits after RENA
-	 *  LPB = Loopback Enable (Needed when FDE is set)
-	 */
-	immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC |
-			SCC_PSMR_NIB22 | SCC_PSMR_LPB;
-
-#if 0
-	/*
-	 * Configure Ethernet TENA Signal
-	 */
-
-#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
-	immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
-	immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
-	immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
-	immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
-#else
-#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
-#endif
-
-#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
-	/*
-	 * Port C is used to control the PHY,MC68160.
-	 */
-	immr->im_ioport.iop_pcdir |=
-			(PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
-
-	immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
-	immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
-	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#endif /* MPC860ADS */
-
-#if defined(CONFIG_AMX860)
-	/*
-	 * Port B is used to control the PHY,MC68160.
-	 */
-	immr->im_cpm.cp_pbdir |=
-			(PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
-
-	immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
-	immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
-
-	immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
-	immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
-#endif /* AMX860 */
-
-#endif /* 0 */
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
-	*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
-#endif
-
-#ifdef CONFIG_RPXLITE
-	*((uchar *) BCSR0) |= BCSR0_ETHEN;
-#endif
-
-#ifdef CONFIG_MBX
-	board_ether_init ();
-#endif
-
-	/*
-	 * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
-	 */
-
-	immr->im_cpm.cp_scc[scc_index].scc_gsmrl |=
-			(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/*
-	 * Work around transmit problem with first eth packet
-	 */
-#if defined (CONFIG_FADS)
-	udelay (10000);				/* wait 10 ms */
-#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
-	udelay (100000);			/* wait 100 ms */
-#endif
-}
-
-static void scc_halt (int scc_index)
-{
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-
-	immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
-			~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	immr->im_ioport.iop_pcso  &=  ~(PC_ENET_CLSN | PC_ENET_RENA);
-}
-
-static int scc_send (int index, volatile void *packet, int length)
-{
-	int i, j = 0;
-
-	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j < TOUT_LOOP)) {
-		udelay (1);		/* will also trigger Wd if needed */
-		j++;
-	}
-	if (j >= TOUT_LOOP)
-		printf ("TX not ready\n");
-	rtx->txbd[txIdx].cbd_bufaddr = (uint) packet;
-	rtx->txbd[txIdx].cbd_datlen = length;
-	rtx->txbd[txIdx].cbd_sc |=
-			(BD_ENET_TX_READY | BD_ENET_TX_LAST | BD_ENET_TX_WRAP);
-	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j < TOUT_LOOP)) {
-		udelay (1);		/* will also trigger Wd if needed */
-		j++;
-	}
-	if (j >= TOUT_LOOP)
-		printf ("TX timeout\n");
-	i = (rtx->txbd[txIdx].
-		 cbd_sc & BD_ENET_TX_STATS) /* return only status bits */ ;
-	return i;
-}
-
-static int scc_recv (int index, void *packet, int max_length)
-{
-	int length = -1;
-
-	if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
-		goto Done;		/* nothing received */
-	}
-
-	if (!(rtx->rxbd[rxIdx].cbd_sc & 0x003f)) {
-		length = rtx->rxbd[rxIdx].cbd_datlen - 4;
-		memcpy (packet,
-				(void *) (NetRxPackets[rxIdx]),
-				length < max_length ? length : max_length);
-	}
-
-	/* Give the buffer back to the SCC. */
-	rtx->rxbd[rxIdx].cbd_datlen = 0;
-
-	/* wrap around buffer index when necessary */
-	if ((rxIdx + 1) >= PKTBUFSRX) {
-		rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
-				(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
-		rxIdx = 0;
-	} else {
-		rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
-		rxIdx++;
-	}
-
-Done:
-	return length;
-}
-
-  /*
-   * Test routines
-   */
-
-static void packet_fill (char *packet, int length)
-{
-	char c = (char) length;
-	int i;
-
-	packet[0] = 0xFF;
-	packet[1] = 0xFF;
-	packet[2] = 0xFF;
-	packet[3] = 0xFF;
-	packet[4] = 0xFF;
-	packet[5] = 0xFF;
-
-	for (i = 6; i < length; i++) {
-		packet[i] = c++;
-	}
-}
-
-static int packet_check (char *packet, int length)
-{
-	char c = (char) length;
-	int i;
-
-	for (i = 6; i < length; i++) {
-		if (packet[i] != c++)
-			return -1;
-	}
-
-	return 0;
-}
-
-static int test_ctlr (int ctlr, int index)
-{
-	int res = -1;
-	char packet_send[MAX_PACKET_LENGTH];
-	char packet_recv[MAX_PACKET_LENGTH];
-	int length;
-	int i;
-	int l;
-
-	ctlr_proc[ctlr].init (index);
-
-	for (i = 0; i < TEST_NUM; i++) {
-		for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) {
-			packet_fill (packet_send, l);
-
-			ctlr_proc[ctlr].send (index, packet_send, l);
-
-			length = ctlr_proc[ctlr].recv (index, packet_recv,
-							MAX_PACKET_LENGTH);
-
-			if (length != l || packet_check (packet_recv, length) < 0) {
-				goto Done;
-			}
-		}
-	}
-
-	res = 0;
-
-Done:
-
-	ctlr_proc[ctlr].halt (index);
-
-	/*
-	 * SCC2 Ethernet parameter RAM space overlaps
-	 * the SPI parameter RAM space. So we need to restore
-	 * the SPI configuration after SCC2 ethernet test.
-	 */
-#if defined(CONFIG_SPI)
-	if (ctlr == CTLR_SCC && index == 1) {
-		spi_init_f ();
-		spi_init_r ();
-	}
-#endif
-
-	if (res != 0) {
-		post_log ("ethernet %s%d test failed\n", ctlr_name[ctlr],
-				  index + 1);
-	}
-
-	return res;
-}
-
-int ether_post_test (int flags)
-{
-	int res = 0;
-	int i;
-
-	ctlr_proc[CTLR_SCC].init = scc_init;
-	ctlr_proc[CTLR_SCC].halt = scc_halt;
-	ctlr_proc[CTLR_SCC].send = scc_send;
-	ctlr_proc[CTLR_SCC].recv = scc_recv;
-
-	for (i = 0; i < CTRL_LIST_SIZE; i++) {
-		if (test_ctlr (ctlr_list[i][0], ctlr_list[i][1]) != 0) {
-			res = -1;
-		}
-	}
-
-#if !defined(CONFIG_8xx_CONS_NONE)
-	serial_reinit_all ();
-#endif
-	return res;
-}
-
-#endif /* CONFIG_POST & CFG_POST_ETHER */
-
-#endif /* CONFIG_POST */