test: provide unit test for memory functions

Memory functions may have architecture specific implementations. These
should be tested.

Provide unit tests for memset(), memcpy(), memmove().

Provide a 'ut lib' sub-command to execute the tests.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

3 files changed, 216 insertions, 0 deletions

diff --git a/test/lib/Makefile b/test/lib/Makefile
index 5a636aac740..308c61708ee 100644
--- a/test/lib/Makefile
+++ b/test/lib/Makefile
@@ -2,5 +2,7 @@
 #
 # (C) Copyright 2018
 # Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
+obj-y += cmd_ut_lib.o
 obj-y += hexdump.o
 obj-y += lmb.o
+obj-y += string.o
diff --git a/test/lib/cmd_ut_lib.c b/test/lib/cmd_ut_lib.c
new file mode 100644
index 00000000000..eb90e539148
--- /dev/null
+++ b/test/lib/cmd_ut_lib.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Heinrich Schuchardt <xypron.glpk@gmx.de>
+ *
+ * Unit tests for library functions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <test/lib.h>
+#include <test/suites.h>
+#include <test/ut.h>
+
+int do_ut_lib(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	struct unit_test *tests = ll_entry_start(struct unit_test, lib_test);
+	const int n_ents = ll_entry_count(struct unit_test, lib_test);
+
+	return cmd_ut_category("lib", tests, n_ents, argc, argv);
+}
diff --git a/test/lib/string.c b/test/lib/string.c
new file mode 100644
index 00000000000..8e246ab4ed9
--- /dev/null
+++ b/test/lib/string.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Heinrich Schuchardt <xypron.glpk@gmx.de>
+ *
+ * Unit tests for memory functions
+ *
+ * The architecture dependent implementations run through different lines of
+ * code depending on the alignment and length of memory regions copied or set.
+ * This has to be considered in testing.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <test/lib.h>
+#include <test/test.h>
+#include <test/ut.h>
+
+/* Xor mask used for marking memory regions */
+#define MASK 0xA5
+/* Number of different alignment values */
+#define SWEEP 16
+/* Allow for copying up to 32 bytes */
+#define BUFLEN (SWEEP + 33)
+
+/**
+ * init_buffer() - initialize buffer
+ *
+ * The buffer is filled with incrementing values xor'ed with the mask.
+ *
+ * @buf:	buffer
+ * @mask:	xor mask
+ */
+static void init_buffer(u8 buf[], u8 mask)
+{
+	int i;
+
+	for (i = 0; i < BUFLEN; ++i)
+		buf[i] = i ^ mask;
+}
+
+/**
+ * test_memset() - test result of memset()
+ *
+ * @uts:	unit test state
+ * @buf:	buffer
+ * @mask:	value set by memset()
+ * @offset:	relative start of region changed by memset() in buffer
+ * @len:	length of region changed by memset()
+ * Return:	0 = success, 1 = failure
+ */
+static int test_memset(struct unit_test_state *uts, u8 buf[], u8 mask,
+		       int offset, int len)
+{
+	int i;
+
+	for (i = 0; i < BUFLEN; ++i) {
+		if (i < offset || i >= offset + len) {
+			ut_asserteq(i, buf[i]);
+		} else {
+			ut_asserteq(mask, buf[i]);
+		}
+	}
+	return 0;
+}
+
+/**
+ * lib_memset() - unit test for memset()
+ *
+ * Test memset() with varied alignment and length of the changed buffer.
+ *
+ * @uts:	unit test state
+ * Return:	0 = success, 1 = failure
+ */
+static int lib_memset(struct unit_test_state *uts)
+{
+	u8 buf[BUFLEN];
+	int offset, len;
+	void *ptr;
+
+	for (offset = 0; offset <= SWEEP; ++offset) {
+		for (len = 1; len < BUFLEN - SWEEP; ++len) {
+			init_buffer(buf, 0);
+			ptr = memset(buf + offset, MASK, len);
+			ut_asserteq_ptr(buf + offset, (u8 *)ptr);
+			if (test_memset(uts, buf, MASK, offset, len)) {
+				debug("%s: failure %d, %d\n",
+				      __func__, offset, len);
+				return CMD_RET_FAILURE;
+			}
+		}
+	}
+	return 0;
+}
+
+LIB_TEST(lib_memset, 0);
+
+/**
+ * test_memmove() - test result of memcpy() or memmove()
+ *
+ * @uts:	unit test state
+ * @buf:	buffer
+ * @mask:	xor mask used to initialize source buffer
+ * @offset1:	relative start of copied region in source buffer
+ * @offset2:	relative start of copied region in destination buffer
+ * @len:	length of region changed by memset()
+ * Return:	0 = success, 1 = failure
+ */
+static int test_memmove(struct unit_test_state *uts, u8 buf[], u8 mask,
+			int offset1, int offset2, int len)
+{
+	int i;
+
+	for (i = 0; i < BUFLEN; ++i) {
+		if (i < offset2 || i >= offset2 + len) {
+			ut_asserteq(i, buf[i]);
+		} else {
+			ut_asserteq((i + offset1 - offset2) ^ mask, buf[i]);
+		}
+	}
+	return 0;
+}
+
+/**
+ * lib_memcpy() - unit test for memcpy()
+ *
+ * Test memcpy() with varied alignment and length of the copied buffer.
+ *
+ * @uts:	unit test state
+ * Return:	0 = success, 1 = failure
+ */
+static int lib_memcpy(struct unit_test_state *uts)
+{
+	u8 buf1[BUFLEN];
+	u8 buf2[BUFLEN];
+	int offset1, offset2, len;
+	void *ptr;
+
+	init_buffer(buf1, MASK);
+
+	for (offset1 = 0; offset1 <= SWEEP; ++offset1) {
+		for (offset2 = 0; offset2 <= SWEEP; ++offset2) {
+			for (len = 1; len < BUFLEN - SWEEP; ++len) {
+				init_buffer(buf2, 0);
+				ptr = memcpy(buf2 + offset2, buf1 + offset1,
+					     len);
+				ut_asserteq_ptr(buf2 + offset2, (u8 *)ptr);
+				if (test_memmove(uts, buf2, MASK, offset1,
+						 offset2, len)) {
+					debug("%s: failure %d, %d, %d\n",
+					      __func__, offset1, offset2, len);
+					return CMD_RET_FAILURE;
+				}
+			}
+		}
+	}
+	return 0;
+}
+
+LIB_TEST(lib_memcpy, 0);
+
+/**
+ * lib_memmove() - unit test for memmove()
+ *
+ * Test memmove() with varied alignment and length of the copied buffer.
+ *
+ * @uts:	unit test state
+ * Return:	0 = success, 1 = failure
+ */
+static int lib_memmove(struct unit_test_state *uts)
+{
+	u8 buf[BUFLEN];
+	int offset1, offset2, len;
+	void *ptr;
+
+	for (offset1 = 0; offset1 <= SWEEP; ++offset1) {
+		for (offset2 = 0; offset2 <= SWEEP; ++offset2) {
+			for (len = 1; len < BUFLEN - SWEEP; ++len) {
+				init_buffer(buf, 0);
+				ptr = memmove(buf + offset2, buf + offset1,
+					      len);
+				ut_asserteq_ptr(buf + offset2, (u8 *)ptr);
+				if (test_memmove(uts, buf, 0, offset1, offset2,
+						 len)) {
+					debug("%s: failure %d, %d, %d\n",
+					      __func__, offset1, offset2, len);
+					return CMD_RET_FAILURE;
+				}
+			}
+		}
+	}
+	return 0;
+}
+
+LIB_TEST(lib_memmove, 0);