Initial revision

1 files changed, 170 insertions, 0 deletions

diff --git a/tools/bddb/doedit.php b/tools/bddb/doedit.php
new file mode 100644
index 00000000000..110ecf39fee
--- /dev/null
+++ b/tools/bddb/doedit.php
@@ -0,0 +1,170 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// doedit page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - Edit Board Results");
+
+	if ($serno == 0)
+		die("the board serial number was not specified");
+
+	$query="update boards set";
+
+	if (isset($ethaddr)) {
+		if (!eth_addr_is_valid($ethaddr))
+			die("ethaddr is invalid ('$ethaddr')");
+		$query.=" ethaddr='$ethaddr',";
+	}
+
+	if (isset($date)) {
+		list($y, $m, $d) = split("-", $date);
+		if (!checkdate($m, $d, $y) || $y < 1999)
+			die("date is invalid (input '$date', " .
+				"yyyy-mm-dd '$y-$m-$d')");
+		$query.=" date='$date'";
+	}
+
+	if (isset($batch)) {
+		if (strlen($batch) > 32)
+			die("batch field too long (>32)");
+		$query.=", batch='$batch'";
+	}
+
+	if (isset($type)) {
+		if (!in_array($type, $type_vals))
+			die("Invalid type ($type) specified");
+		$query.=", type='$type'";
+	}
+
+	if (isset($rev)) {
+		if (($rev = intval($rev)) <= 0 || $rev > 255)
+			die("Revision number is invalid ($rev)");
+		$query.=sprintf(", rev=%d", $rev);
+	}
+
+	if (isset($location)) {
+		if (strlen($location) > 64)
+			die("location field too long (>64)");
+		$query.=", location='$location'";
+	}
+
+	if (isset($comments))
+		$query.=", comments='" . rawurlencode($comments) . "'";
+
+	$query.=gather_enum_multi_query("sdram", 4);
+
+	$query.=gather_enum_multi_query("flash", 4);
+
+	$query.=gather_enum_multi_query("zbt", 16);
+
+	$query.=gather_enum_multi_query("xlxtyp", 4);
+	$nxlx = count_enum_multi("xlxtyp", 4);
+
+	$query.=gather_enum_multi_query("xlxspd", 4);
+	if (count_enum_multi("xlxspd", 4) != $nxlx)
+		die("number of xilinx speeds not same as number of types");
+
+	$query.=gather_enum_multi_query("xlxtmp", 4);
+	if (count_enum_multi("xlxtmp", 4) != $nxlx)
+		die("number of xilinx temps. not same as number of types");
+
+	$query.=gather_enum_multi_query("xlxgrd", 4);
+	if (count_enum_multi("xlxgrd", 4) != $nxlx)
+		die("number of xilinx grades not same as number of types");
+
+	if (isset($cputyp)) {
+		$query.=", cputyp='$cputyp'";
+		if ($cpuspd == '')
+			die("must specify cpu speed if cpu type is defined");
+		$query.=", cpuspd='$cpuspd'";
+		if ($cpmspd == '')
+			die("must specify cpm speed if cpu type is defined");
+		$query.=", cpmspd='$cpmspd'";
+		if ($busspd == '')
+			die("must specify bus speed if cpu type is defined");
+		$query.=", busspd='$busspd'";
+	}
+	else {
+		if (isset($cpuspd))
+			die("can't specify cpu speed if there is no cpu");
+		if (isset($cpmspd))
+			die("can't specify cpm speed if there is no cpu");
+		if (isset($busspd))
+			die("can't specify bus speed if there is no cpu");
+	}
+
+	if (isset($hschin)) {
+		if (($hschin = intval($hschin)) < 0 || $hschin > 4)
+			die("Invalid number of hs input chans ($hschin)");
+	}
+	else
+		$hschin = 0;
+	if (isset($hschout)) {
+		if (($hschout = intval($hschout)) < 0 || $hschout > 4)
+			die("Invalid number of hs output chans ($hschout)");
+	}
+	else
+		$hschout = 0;
+	if (isset($hstype))
+		$query.=", hstype='$hstype'";
+	else {
+		if ($hschin != 0)
+			die("number of high-speed input channels must be zero"
+				. " if high-speed chip is not present");
+		if ($hschout != 0)
+			die("number of high-speed output channels must be zero"
+				. " if high-speed chip is not present");
+	}
+	$query.=", hschin='$hschin'";
+	$query.=", hschout='$hschout'";
+
+	$query.=" where serno=$serno";
+
+	mysql_query($query);
+	if(mysql_errno()) {
+		$errstr = mysql_error();
+		echo "\t<font size=+4>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe following error was encountered:\n";
+		echo "\t\t</p>\n";
+		echo "\t\t<center>\n";
+		printf("\t\t\t<b>%s</b>\n", $errstr);
+		echo "\t\t</center>\n";
+		echo "\t</font>\n";
+	}
+	else {
+		$sernos = array($serno);
+		$nsernos = 1;
+
+		write_eeprom_cfg_file();
+
+		echo "\t<font size=+2>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe board with serial number <b>$serno</b> was"
+			. " successfully updated";
+		if ($numerrs > 0) {
+			$errstr = $cfgerrs[0];
+			echo "<br>\n\t\t\t";
+			echo "(but the cfg file update failed: $errstr)";
+		}
+		echo "\n";
+		echo "\t\t</p>\n";
+		echo "\t</font>\n";
+	}
+
+?>
+<p>
+<table align=center width="100%">
+<tr>
+  <td align=center><a href="browse.php">Back to Browse</a></td>
+  <td align=center><a href="index.php">Back to Start</a></td>
+</tr>
+</table>
+<?php
+	pg_foot();
+?>