binman: Add support for building x86 ROMs

The structure of x86 ROMs is pretty complex. There are various binary blobs
to place in the image. Microcode requires special handling so that it is
available to very early code and can be used without any memory whatsoever.

Add support for the various entry types that are currently needed, along
with some tests.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

8 files changed, 370 insertions, 0 deletions

diff --git a/tools/binman/etype/intel_descriptor.py b/tools/binman/etype/intel_descriptor.py
new file mode 100644
index 00000000000..7f4ea0b21be
--- /dev/null
+++ b/tools/binman/etype/intel_descriptor.py
@@ -0,0 +1,55 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+# Entry-type module for 'u-boot'
+#
+
+import struct
+
+from entry import Entry
+from blob import Entry_blob
+
+FD_SIGNATURE   = struct.pack('<L', 0x0ff0a55a)
+MAX_REGIONS    = 5
+
+(REGION_DESCRIPTOR, REGION_BIOS, REGION_ME, REGION_GBE,
+        REGION_PDATA) = range(5)
+
+class Region:
+    def __init__(self, data, frba, region_num):
+        pos = frba + region_num * 4
+        val = struct.unpack('<L', data[pos:pos + 4])[0]
+        self.base = (val & 0xfff) << 12
+        self.limit = ((val & 0x0fff0000) >> 4) | 0xfff
+        self.size = self.limit - self.base + 1
+
+class Entry_intel_descriptor(Entry_blob):
+    """Intel flash descriptor block (4KB)
+
+    This is placed at the start of flash and provides information about
+    the SPI flash regions. In particular it provides the base address and
+    size of the ME region, allowing us to place the ME binary in the right
+    place.
+    """
+    def __init__(self, image, etype, node):
+        Entry_blob.__init__(self, image, etype, node)
+        self._regions = []
+
+    def GetDefaultFilename(self):
+        return 'descriptor.bin'
+
+    def GetPositions(self):
+        pos = self.data.find(FD_SIGNATURE)
+        if pos == -1:
+            self.Raise('Cannot find FD signature')
+        flvalsig, flmap0, flmap1, flmap2 = struct.unpack('<LLLL',
+                                                    self.data[pos:pos + 16])
+        frba = ((flmap0 >> 16) & 0xff) << 4
+        for i in range(MAX_REGIONS):
+            self._regions.append(Region(self.data, frba, i))
+
+        # Set the offset for ME only, for now, since the others are not used
+        return {'intel-me': [self._regions[REGION_ME].base,
+                             self._regions[REGION_ME].size]}
diff --git a/tools/binman/etype/intel_me.py b/tools/binman/etype/intel_me.py
new file mode 100644
index 00000000000..45ab50c1ec3
--- /dev/null
+++ b/tools/binman/etype/intel_me.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+# Entry-type module for Intel Management Engine binary blob
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_intel_me(Entry_blob):
+    def __init__(self, image, etype, node):
+        Entry_blob.__init__(self, image, etype, node)
+
+    def GetDefaultFilename(self):
+        return 'me.bin'
diff --git a/tools/binman/etype/intel_mrc.py b/tools/binman/etype/intel_mrc.py
new file mode 100644
index 00000000000..f6cedb70586
--- /dev/null
+++ b/tools/binman/etype/intel_mrc.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+# Entry-type module for Intel Memory Reference Code binary blob
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_intel_mrc(Entry_blob):
+    def __init__(self, image, etype, node):
+        Entry_blob.__init__(self, image, etype, node)
+
+    def GetDefaultFilename(self):
+        return 'mrc.bin'
diff --git a/tools/binman/etype/intel_vga.py b/tools/binman/etype/intel_vga.py
new file mode 100644
index 00000000000..d8f270bbd95
--- /dev/null
+++ b/tools/binman/etype/intel_vga.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+# Entry-type module for x86 VGA ROM binary blob
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_intel_vga(Entry_blob):
+    def __init__(self, image, etype, node):
+        Entry_blob.__init__(self, image, etype, node)
+
+    def GetDefaultFilename(self):
+        return 'vga.bin'
diff --git a/tools/binman/etype/u_boot_dtb_with_ucode.py b/tools/binman/etype/u_boot_dtb_with_ucode.py
new file mode 100644
index 00000000000..732d10a14ee
--- /dev/null
+++ b/tools/binman/etype/u_boot_dtb_with_ucode.py
@@ -0,0 +1,76 @@
+# Copyright (c) 2016 Google, Inc
+## Written by Simon Glass <sjg@chromium.org>
+
+# SPDX-License-Identifier:      GPL-2.0+
+#
+# Entry-type module for U-Boot device tree with the microcode removed
+#
+
+import fdt_select
+from entry import Entry
+from blob import Entry_blob
+import tools
+
+class Entry_u_boot_dtb_with_ucode(Entry_blob):
+    """A U-Boot device tree file, with the microcode removed
+
+    See Entry_u_boot_ucode for full details of the 3 entries involved in this
+    process.
+    """
+    def __init__(self, image, etype, node):
+        Entry_blob.__init__(self, image, etype, node)
+        self.ucode_data = ''
+        self.collate = False
+        self.ucode_offset = None
+        self.ucode_size = None
+
+    def GetDefaultFilename(self):
+        return 'u-boot.dtb'
+
+    def ObtainContents(self):
+        Entry_blob.ObtainContents(self)
+
+        # If the image does not need microcode, there is nothing to do
+        ucode_dest_entry = self.image.FindEntryType('u-boot-with-ucode-ptr')
+        if not ucode_dest_entry or not ucode_dest_entry.target_pos:
+            return True
+
+        # Create a new file to hold the copied device tree
+        dtb_name = 'u-boot-dtb-with-ucode.dtb'
+        fname = tools.GetOutputFilename(dtb_name)
+        with open(fname, 'wb') as fd:
+            fd.write(self.data)
+
+        # Remove the microcode
+        fdt = fdt_select.FdtScan(fname)
+        fdt.Scan()
+        ucode = fdt.GetNode('/microcode')
+        if not ucode:
+            raise self.Raise("No /microcode node found in '%s'" % fname)
+
+        # There's no need to collate it (move all microcode into one place)
+        # if we only have one chunk of microcode.
+        self.collate = len(ucode.subnodes) > 1
+        for node in ucode.subnodes:
+            data_prop = node.props.get('data')
+            if data_prop:
+                self.ucode_data += ''.join(data_prop.bytes)
+                if not self.collate:
+                    poffset = data_prop.GetOffset()
+                    if poffset is None:
+                        # We cannot obtain a property offset. Collate instead.
+                        self.collate = True
+                    else:
+                        # Find the offset in the device tree of the ucode data
+                        self.ucode_offset = poffset + 12
+                        self.ucode_size = len(data_prop.bytes)
+                if self.collate:
+                    prop = node.DeleteProp('data')
+        if self.collate:
+            fdt.Pack()
+            fdt.Flush()
+
+            # Make this file the contents of this entry
+            self._pathname = fname
+            self.ReadContents()
+        return True
diff --git a/tools/binman/etype/u_boot_ucode.py b/tools/binman/etype/u_boot_ucode.py
new file mode 100644
index 00000000000..8fe27acb245
--- /dev/null
+++ b/tools/binman/etype/u_boot_ucode.py
@@ -0,0 +1,84 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+# Entry-type module for a U-Boot binary with an embedded microcode pointer
+#
+
+from entry import Entry
+from blob import Entry_blob
+import tools
+
+class Entry_u_boot_ucode(Entry_blob):
+    """U-Boot microcode block
+
+    U-Boot on x86 needs a single block of microcode. This is collected from
+    the various microcode update nodes in the device tree. It is also unable
+    to read the microcode from the device tree on platforms that use FSP
+    (Firmware Support Package) binaries, because the API requires that the
+    microcode is supplied before there is any SRAM available to use (i.e.
+    the FSP sets up the SRAM / cache-as-RAM but does so in the call that
+    requires the microcode!). To keep things simple, all x86 platforms handle
+    microcode the same way in U-Boot (even non-FSP platforms). This is that
+    a table is placed at _dt_ucode_base_size containing the base address and
+    size of the microcode. This is either passed to the FSP (for FSP
+    platforms), or used to set up the microcode (for non-FSP platforms).
+    This all happens in the build system since it is the only way to get
+    the microcode into a single blob and accessible without SRAM.
+
+    There are two cases to handle. If there is only one microcode blob in
+    the device tree, then the ucode pointer it set to point to that. This
+    entry (u-boot-ucode) is empty. If there is more than one update, then
+    this entry holds the concatenation of all updates, and the device tree
+    entry (u-boot-dtb-with-ucode) is updated to remove the microcode. This
+    last step ensures that that the microcode appears in one contiguous
+    block in the image and is not unnecessarily duplicated in the device
+    tree. It is referred to as 'collation' here.
+
+    Entry types that have a part to play in handling microcode:
+
+        Entry_u_boot_with_ucode_ptr:
+            Contains u-boot-nodtb.bin (i.e. U-Boot without the device tree).
+            It updates it with the address and size of the microcode so that
+            U-Boot can find it early on start-up.
+        Entry_u_boot_dtb_with_ucode:
+            Contains u-boot.dtb. It stores the microcode in a
+            'self.ucode_data' property, which is then read by this class to
+            obtain the microcode if needed. If collation is performed, it
+            removes the microcode from the device tree.
+        Entry_u_boot_ucode:
+            This class. If collation is enabled it reads the microcode from
+            the Entry_u_boot_dtb_with_ucode entry, and uses it as the
+            contents of this entry.
+    """
+    def __init__(self, image, etype, node):
+        Entry_blob.__init__(self, image, etype, node)
+
+    def ObtainContents(self):
+        # If the image does not need microcode, there is nothing to do
+        ucode_dest_entry = self.image.FindEntryType('u-boot-with-ucode-ptr')
+        if ucode_dest_entry and not ucode_dest_entry.target_pos:
+            self.data = ''
+            return True
+
+        # Get the microcode from the device tree entry
+        fdt_entry = self.image.FindEntryType('u-boot-dtb-with-ucode')
+        if not fdt_entry or not fdt_entry.ucode_data:
+            return False
+
+        if not fdt_entry.collate:
+            # This section can be empty
+            self.data = ''
+            return True
+
+        # Write it out to a file
+        dtb_name = 'u-boot-ucode.bin'
+        fname = tools.GetOutputFilename(dtb_name)
+        with open(fname, 'wb') as fd:
+            fd.write(fdt_entry.ucode_data)
+
+        self._pathname = fname
+        self.ReadContents()
+
+        return True
diff --git a/tools/binman/etype/u_boot_with_ucode_ptr.py b/tools/binman/etype/u_boot_with_ucode_ptr.py
new file mode 100644
index 00000000000..6f01adb9701
--- /dev/null
+++ b/tools/binman/etype/u_boot_with_ucode_ptr.py
@@ -0,0 +1,87 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+# Entry-type module for a U-Boot binary with an embedded microcode pointer
+#
+
+import struct
+
+import command
+from entry import Entry
+from blob import Entry_blob
+import fdt_util
+import tools
+
+class Entry_u_boot_with_ucode_ptr(Entry_blob):
+    """U-Boot with embedded microcode pointer
+
+    See Entry_u_boot_ucode for full details of the 3 entries involved in this
+    process.
+    """
+    def __init__(self, image, etype, node):
+        Entry_blob.__init__(self, image, etype, node)
+        self.elf_fname = 'u-boot'
+        self.target_pos = None
+
+    def GetDefaultFilename(self):
+        return 'u-boot-nodtb.bin'
+
+    def ObtainContents(self):
+        # Figure out where to put the microcode pointer
+        fname = tools.GetInputFilename(self.elf_fname)
+        args = [['nm', fname], ['grep', '-w', '_dt_ucode_base_size']]
+        out = (command.RunPipe(args, capture=True, raise_on_error=False).
+               stdout.splitlines())
+        if len(out) == 1:
+            self.target_pos = int(out[0].split()[0], 16)
+        elif not fdt_util.GetBool(self._node, 'optional-ucode'):
+            self.Raise('Cannot locate _dt_ucode_base_size symbol in u-boot')
+
+        return Entry_blob.ObtainContents(self)
+
+    def ProcessContents(self):
+        # If the image does not need microcode, there is nothing to do
+        if not self.target_pos:
+            return
+
+        # Get the position of the microcode
+        ucode_entry = self.image.FindEntryType('u-boot-ucode')
+        if not ucode_entry:
+            self.Raise('Cannot find microcode region u-boot-ucode')
+
+        # Check the target pos is in the image. If it is not, then U-Boot is
+        # being linked incorrectly, or is being placed at the wrong position
+        # in the image.
+        #
+        # The image must be set up so that U-Boot is placed at the
+        # flash address to which it is linked. For example, if
+        # CONFIG_SYS_TEXT_BASE is 0xfff00000, and the ROM is 8MB, then
+        # the U-Boot region must start at position 7MB in the image. In this
+        # case the ROM starts at 0xff800000, so the position of the first
+        # entry in the image corresponds to that.
+        if (self.target_pos < self.pos or
+                self.target_pos >= self.pos + self.size):
+            self.Raise('Microcode pointer _dt_ucode_base_size at %08x is '
+                'outside the image ranging from %08x to %08x' %
+                (self.target_pos, self.pos, self.pos + self.size))
+
+        # Get the microcode, either from u-boot-ucode or u-boot-dtb-with-ucode.
+        # If we have left the microcode in the device tree, then it will be
+        # in the former. If we extracted the microcode from the device tree
+        # and collated it in one place, it will be in the latter.
+        if ucode_entry.size:
+            pos, size = ucode_entry.pos, ucode_entry.size
+        else:
+            dtb_entry = self.image.FindEntryType('u-boot-dtb-with-ucode')
+            if not dtb_entry:
+                self.Raise('Cannot find microcode region u-boot-dtb-with-ucode')
+            pos = dtb_entry.pos + dtb_entry.ucode_offset
+            size = dtb_entry.ucode_size
+
+        # Write the microcode position and size into the entry
+        pos_and_size = struct.pack('<2L', pos, size)
+        self.target_pos -= self.pos
+        self.data = (self.data[:self.target_pos] + pos_and_size +
+                     self.data[self.target_pos + 8:])
diff --git a/tools/binman/etype/x86_start16.py b/tools/binman/etype/x86_start16.py
new file mode 100644
index 00000000000..a44ea68ac47
--- /dev/null
+++ b/tools/binman/etype/x86_start16.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2016 Google, Inc
+# Written by Simon Glass <sjg@chromium.org>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+# Entry-type module for the 16-bit x86 start-up code for U-Boot
+#
+
+from entry import Entry
+from blob import Entry_blob
+
+class Entry_x86_start16(Entry_blob):
+    def __init__(self, image, etype, node):
+        Entry_blob.__init__(self, image, etype, node)
+
+    def GetDefaultFilename(self):
+        return 'u-boot-x86-16bit.bin'