diff options
33 files changed, 1224 insertions, 232 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 38c68ee87d4..64648c29219 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -618,6 +618,7 @@ F: drivers/clk/clk_zynqmp.c F: driver/firmware/firmware-zynqmp.c F: drivers/fpga/zynqpl.c F: drivers/gpio/zynq_gpio.c +F: drivers/gpio/zynqmp_gpio_modepin.c F: drivers/i2c/i2c-cdns.c F: drivers/i2c/muxes/pca954x.c F: drivers/i2c/zynq_i2c.c @@ -626,6 +627,7 @@ F: drivers/mmc/zynq_sdhci.c F: drivers/mtd/nand/raw/zynq_nand.c F: drivers/net/phy/xilinx_phy.c F: drivers/net/zynq_gem.c +F: drivers/phy/phy-zynqmp.c F: drivers/serial/serial_zynq.c F: drivers/reset/reset-zynqmp.c F: drivers/rtc/zynqmp_rtc.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 44954977b68..8fc18976896 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1207,7 +1207,7 @@ config ARCH_ZYNQMP select DM_SERIAL select DM_SPI if SPI select DM_SPI_FLASH if DM_SPI - select FIRMWARE + imply FIRMWARE select GICV2 select GPIO_EXTRA_HEADER select OF_CONTROL @@ -1217,7 +1217,7 @@ config ARCH_ZYNQMP select SPL_DM_SPI if SPI && SPL_DM select SPL_DM_SPI_FLASH if SPL_DM_SPI select SPL_DM_MAILBOX if SPL - select SPL_FIRMWARE if SPL + imply SPL_FIRMWARE if SPL select SPL_SEPARATE_BSS if SPL select SUPPORT_SPL select ZYNQMP_IPI @@ -1228,6 +1228,7 @@ config ARCH_ZYNQMP imply FAT_WRITE imply MP imply DM_USB_GADGET + imply ZYNQMP_GPIO_MODEPIN if DM_GPIO && USB config ARCH_TEGRA bool "NVIDIA Tegra" diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi index b27b0aaf7c9..664e65896d7 100644 --- a/arch/arm/dts/zynqmp-clk-ccf.dtsi +++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi @@ -169,28 +169,24 @@ clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>, <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>, <&zynqmp_clk GEM_TSU>; - clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gem1 { clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>, <&zynqmp_clk GEM_TSU>; - clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gem2 { clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>, <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>, <&zynqmp_clk GEM_TSU>; - clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gem3 { clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>, <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>, <&zynqmp_clk GEM_TSU>; - clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; }; &gpio { diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index 1332f5373fb..755a4ed2e51 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -265,7 +265,7 @@ }; /* GDMA */ - fpd_dma_chan1: dma@fd500000 { + fpd_dma_chan1: dma-controller@fd500000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd500000 0x0 0x1000>; @@ -276,9 +276,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x14e8>; power-domains = <&zynqmp_firmware PD_GDMA>; + #dma-cells = <1>; }; - fpd_dma_chan2: dma@fd510000 { + fpd_dma_chan2: dma-controller@fd510000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd510000 0x0 0x1000>; @@ -289,9 +290,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x14e9>; power-domains = <&zynqmp_firmware PD_GDMA>; + #dma-cells = <1>; }; - fpd_dma_chan3: dma@fd520000 { + fpd_dma_chan3: dma-controller@fd520000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd520000 0x0 0x1000>; @@ -302,9 +304,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x14ea>; power-domains = <&zynqmp_firmware PD_GDMA>; + #dma-cells = <1>; }; - fpd_dma_chan4: dma@fd530000 { + fpd_dma_chan4: dma-controller@fd530000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd530000 0x0 0x1000>; @@ -315,9 +318,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x14eb>; power-domains = <&zynqmp_firmware PD_GDMA>; + #dma-cells = <1>; }; - fpd_dma_chan5: dma@fd540000 { + fpd_dma_chan5: dma-controller@fd540000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd540000 0x0 0x1000>; @@ -328,9 +332,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x14ec>; power-domains = <&zynqmp_firmware PD_GDMA>; + #dma-cells = <1>; }; - fpd_dma_chan6: dma@fd550000 { + fpd_dma_chan6: dma-controller@fd550000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd550000 0x0 0x1000>; @@ -341,9 +346,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x14ed>; power-domains = <&zynqmp_firmware PD_GDMA>; + #dma-cells = <1>; }; - fpd_dma_chan7: dma@fd560000 { + fpd_dma_chan7: dma-controller@fd560000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd560000 0x0 0x1000>; @@ -354,9 +360,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x14ee>; power-domains = <&zynqmp_firmware PD_GDMA>; + #dma-cells = <1>; }; - fpd_dma_chan8: dma@fd570000 { + fpd_dma_chan8: dma-controller@fd570000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xfd570000 0x0 0x1000>; @@ -367,6 +374,7 @@ #stream-id-cells = <1>; iommus = <&smmu 0x14ef>; power-domains = <&zynqmp_firmware PD_GDMA>; + #dma-cells = <1>; }; gic: interrupt-controller@f9010000 { @@ -396,7 +404,7 @@ * These dma channels, Users should ensure that these dma * Channels are allowed for non secure access. */ - lpd_dma_chan1: dma@ffa80000 { + lpd_dma_chan1: dma-controller@ffa80000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffa80000 0x0 0x1000>; @@ -407,9 +415,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x868>; power-domains = <&zynqmp_firmware PD_ADMA>; + #dma-cells = <1>; }; - lpd_dma_chan2: dma@ffa90000 { + lpd_dma_chan2: dma-controller@ffa90000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffa90000 0x0 0x1000>; @@ -420,9 +429,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x869>; power-domains = <&zynqmp_firmware PD_ADMA>; + #dma-cells = <1>; }; - lpd_dma_chan3: dma@ffaa0000 { + lpd_dma_chan3: dma-controller@ffaa0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffaa0000 0x0 0x1000>; @@ -433,9 +443,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x86a>; power-domains = <&zynqmp_firmware PD_ADMA>; + #dma-cells = <1>; }; - lpd_dma_chan4: dma@ffab0000 { + lpd_dma_chan4: dma-controller@ffab0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffab0000 0x0 0x1000>; @@ -446,9 +457,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x86b>; power-domains = <&zynqmp_firmware PD_ADMA>; + #dma-cells = <1>; }; - lpd_dma_chan5: dma@ffac0000 { + lpd_dma_chan5: dma-controller@ffac0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffac0000 0x0 0x1000>; @@ -459,9 +471,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x86c>; power-domains = <&zynqmp_firmware PD_ADMA>; + #dma-cells = <1>; }; - lpd_dma_chan6: dma@ffad0000 { + lpd_dma_chan6: dma-controller@ffad0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffad0000 0x0 0x1000>; @@ -472,9 +485,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x86d>; power-domains = <&zynqmp_firmware PD_ADMA>; + #dma-cells = <1>; }; - lpd_dma_chan7: dma@ffae0000 { + lpd_dma_chan7: dma-controller@ffae0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffae0000 0x0 0x1000>; @@ -485,9 +499,10 @@ #stream-id-cells = <1>; iommus = <&smmu 0x86e>; power-domains = <&zynqmp_firmware PD_ADMA>; + #dma-cells = <1>; }; - lpd_dma_chan8: dma@ffaf0000 { + lpd_dma_chan8: dma-controller@ffaf0000 { status = "disabled"; compatible = "xlnx,zynqmp-dma-1.0"; reg = <0x0 0xffaf0000 0x0 0x1000>; @@ -498,6 +513,7 @@ #stream-id-cells = <1>; iommus = <&smmu 0x86f>; power-domains = <&zynqmp_firmware PD_ADMA>; + #dma-cells = <1>; }; mc: memory-controller@fd070000 { @@ -527,12 +543,13 @@ interrupt-parent = <&gic>; interrupts = <0 57 4>, <0 57 4>; reg = <0x0 0xff0b0000 0x0 0x1000>; - clock-names = "pclk", "hclk", "tx_clk"; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x874>; power-domains = <&zynqmp_firmware PD_ETH_0>; + resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>; }; gem1: ethernet@ff0c0000 { @@ -541,12 +558,13 @@ interrupt-parent = <&gic>; interrupts = <0 59 4>, <0 59 4>; reg = <0x0 0xff0c0000 0x0 0x1000>; - clock-names = "pclk", "hclk", "tx_clk"; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x875>; power-domains = <&zynqmp_firmware PD_ETH_1>; + resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; }; gem2: ethernet@ff0d0000 { @@ -555,12 +573,13 @@ interrupt-parent = <&gic>; interrupts = <0 61 4>, <0 61 4>; reg = <0x0 0xff0d0000 0x0 0x1000>; - clock-names = "pclk", "hclk", "tx_clk"; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x876>; power-domains = <&zynqmp_firmware PD_ETH_2>; + resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>; }; gem3: ethernet@ff0e0000 { @@ -569,12 +588,13 @@ interrupt-parent = <&gic>; interrupts = <0 63 4>, <0 63 4>; reg = <0x0 0xff0e0000 0x0 0x1000>; - clock-names = "pclk", "hclk", "tx_clk"; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; #size-cells = <0>; #stream-id-cells = <1>; iommus = <&smmu 0x877>; power-domains = <&zynqmp_firmware PD_ETH_3>; + resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>; }; gpio: gpio@ff0a0000 { @@ -820,7 +840,7 @@ uart0: serial@ff000000 { u-boot,dm-pre-reloc; - compatible = "cdns,uart-r1p12", "xlnx,xuartps"; + compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 21 4>; @@ -831,7 +851,7 @@ uart1: serial@ff010000 { u-boot,dm-pre-reloc; - compatible = "cdns,uart-r1p12", "xlnx,xuartps"; + compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 22 4>; @@ -854,7 +874,7 @@ reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; ranges; - dwc3_0: dwc3@fe200000 { + dwc3_0: usb@fe200000 { compatible = "snps,dwc3"; status = "disabled"; reg = <0x0 0xfe200000 0x0 0x40000>; @@ -886,7 +906,7 @@ reset-names = "usb_crst", "usb_hibrst", "usb_apbrst"; ranges; - dwc3_1: dwc3@fe300000 { + dwc3_1: usb@fe300000 { compatible = "snps,dwc3"; status = "disabled"; reg = <0x0 0xfe300000 0x0 0x40000>; @@ -961,6 +981,7 @@ }; zynqmp_dpsub: display@fd4a0000 { + u-boot,dm-pre-reloc; compatible = "xlnx,zynqmp-dpsub-1.7"; status = "disabled"; reg = <0x0 0xfd4a0000 0x0 0x1000>, diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 99a17bccb38..a25a95a0131 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -15,6 +15,8 @@ config TARGET_MICROBLAZE_GENERIC select DM_SERIAL select OF_CONTROL select SUPPORT_SPL + select SPL_LIBCOMMON_SUPPORT if SPL + select SPL_LIBGENERIC_SUPPORT if SPL select SYSRESET select DM_SPI select DM_SPI_FLASH diff --git a/arch/microblaze/cpu/exception.c b/arch/microblaze/cpu/exception.c index b8dedc4e195..e9476abedbd 100644 --- a/arch/microblaze/cpu/exception.c +++ b/arch/microblaze/cpu/exception.c @@ -55,7 +55,7 @@ void _hw_exception_handler (void) hang(); } -#ifdef CONFIG_SYS_USR_EXCEP +#if CONFIG_IS_ENABLED(XILINX_MICROBLAZE0_USR_EXCEP) void _exception_handler (void) { puts("User vector_exception\n"); diff --git a/arch/microblaze/cpu/spl.c b/arch/microblaze/cpu/spl.c index 86522f84479..cea6d56f16f 100644 --- a/arch/microblaze/cpu/spl.c +++ b/arch/microblaze/cpu/spl.c @@ -12,12 +12,15 @@ #include <spl.h> #include <asm/io.h> #include <asm/u-boot.h> +#include <linux/stringify.h> bool boot_linux; -u32 spl_boot_device(void) +void board_boot_order(u32 *spl_boot_list) { - return BOOT_DEVICE_NOR; + spl_boot_list[0] = BOOT_DEVICE_NOR; + spl_boot_list[1] = BOOT_DEVICE_RAM; + spl_boot_list[2] = BOOT_DEVICE_SPI; } /* Board initialization after bss clearance */ @@ -52,8 +55,9 @@ int spl_start_uboot(void) int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { - __asm__ __volatile__ ("mts rmsr, r0;" \ - "bra r0"); + __asm__ __volatile__ ( + "mts rmsr, r0;" \ + "brai " __stringify(CONFIG_XILINX_MICROBLAZE0_VECTOR_BASE_ADDR)); return 0; } diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 9479737aa29..645f7cb0389 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -15,7 +15,7 @@ _start: mts rmsr, r0 /* disable cache */ - addi r8, r0, __end + addi r8, r0, _end mts rslr, r8 #if defined(CONFIG_SPL_BUILD) @@ -105,15 +105,17 @@ clear_bss: * r10: Stores little/big endian offset for vectors * r2: Stores imm opcode * r3: Stores brai opcode + * r4: Stores the vector base address */ __setup_exceptions: - addik r1, r1, -28 + addik r1, r1, -32 swi r2, r1, 4 swi r3, r1, 8 - swi r6, r1, 12 - swi r7, r1, 16 - swi r8, r1, 20 - swi r10, r1, 24 + swi r4, r1, 12 + swi r6, r1, 16 + swi r7, r1, 20 + swi r8, r1, 24 + swi r10, r1, 28 /* Find-out if u-boot is running on BIG/LITTLE endian platform * There are some steps which is necessary to keep in mind: @@ -125,33 +127,32 @@ __setup_exceptions: * 4b) BIG endian - r10 contains 0x0 because 0x2 offset is on addr 0x3 */ addik r6, r0, 0x2 /* BIG/LITTLE endian offset */ - lwi r7, r0, 0x28 - swi r6, r0, 0x28 /* used first unused MB vector */ - lbui r10, r0, 0x28 /* used first unused MB vector */ - swi r7, r0, 0x28 + sw r6, r1, r0 + lbu r10, r1, r0 /* add opcode instruction for 32bit jump - 2 instruction imm & brai */ addi r2, r0, 0xb0000000 /* hex b000 opcode imm */ addi r3, r0, 0xb8080000 /* hew b808 opcode brai */ -#ifdef CONFIG_SYS_RESET_ADDRESS + /* Store the vector base address in r4 */ + addi r4, r0, CONFIG_XILINX_MICROBLAZE0_VECTOR_BASE_ADDR + /* reset address */ - swi r2, r0, 0x0 /* reset address - imm opcode */ - swi r3, r0, 0x4 /* reset address - brai opcode */ + swi r2, r4, 0x0 /* reset address - imm opcode */ + swi r3, r4, 0x4 /* reset address - brai opcode */ - addik r6, r0, CONFIG_SYS_RESET_ADDRESS + addik r6, r0, CONFIG_SYS_TEXT_BASE sw r6, r1, r0 lhu r7, r1, r10 rsubi r8, r10, 0x2 - sh r7, r0, r8 + sh r7, r4, r8 rsubi r8, r10, 0x6 - sh r6, r0, r8 -#endif + sh r6, r4, r8 -#ifdef CONFIG_SYS_USR_EXCEP +#if CONFIG_IS_ENABLED(XILINX_MICROBLAZE0_USR_EXCEP) /* user_vector_exception */ - swi r2, r0, 0x8 /* user vector exception - imm opcode */ - swi r3, r0, 0xC /* user vector exception - brai opcode */ + swi r2, r4, 0x8 /* user vector exception - imm opcode */ + swi r3, r4, 0xC /* user vector exception - brai opcode */ addik r6, r5, _exception_handler sw r6, r1, r0 @@ -177,42 +178,43 @@ __setup_exceptions: */ lhu r7, r1, r10 rsubi r8, r10, 0xa - sh r7, r0, r8 + sh r7, r4, r8 rsubi r8, r10, 0xe - sh r6, r0, r8 + sh r6, r4, r8 #endif /* interrupt_handler */ - swi r2, r0, 0x10 /* interrupt - imm opcode */ - swi r3, r0, 0x14 /* interrupt - brai opcode */ + swi r2, r4, 0x10 /* interrupt - imm opcode */ + swi r3, r4, 0x14 /* interrupt - brai opcode */ addik r6, r5, _interrupt_handler sw r6, r1, r0 lhu r7, r1, r10 rsubi r8, r10, 0x12 - sh r7, r0, r8 + sh r7, r4, r8 rsubi r8, r10, 0x16 - sh r6, r0, r8 + sh r6, r4, r8 /* hardware exception */ - swi r2, r0, 0x20 /* hardware exception - imm opcode */ - swi r3, r0, 0x24 /* hardware exception - brai opcode */ + swi r2, r4, 0x20 /* hardware exception - imm opcode */ + swi r3, r4, 0x24 /* hardware exception - brai opcode */ addik r6, r5, _hw_exception_handler sw r6, r1, r0 lhu r7, r1, r10 rsubi r8, r10, 0x22 - sh r7, r0, r8 + sh r7, r4, r8 rsubi r8, r10, 0x26 - sh r6, r0, r8 + sh r6, r4, r8 - lwi r10, r1, 24 - lwi r8, r1, 20 - lwi r7, r1, 16 - lwi r6, r1, 12 + lwi r10, r1, 28 + lwi r8, r1, 24 + lwi r7, r1, 20 + lwi r6, r1, 16 + lwi r4, r1, 12 lwi r3, r1, 8 lwi r2, r1, 4 - addik r1, r1, 28 + addik r1, r1, 32 rtsd r15, 8 or r0, r0, r0 @@ -270,7 +272,7 @@ relocate_code: add r23, r0, r7 /* Move reloc addr to r23 */ /* Relocate text and data - r12 temp value */ addi r21, r0, _start - addi r22, r0, __end - 4 /* Include BSS too */ + addi r22, r0, _end - 4 /* Include BSS too */ rsub r6, r21, r22 or r5, r0, r0 diff --git a/arch/microblaze/cpu/u-boot-spl.lds b/arch/microblaze/cpu/u-boot-spl.lds index 3387eb7189d..7883a64b158 100644 --- a/arch/microblaze/cpu/u-boot-spl.lds +++ b/arch/microblaze/cpu/u-boot-spl.lds @@ -53,10 +53,10 @@ SECTIONS . = ALIGN(4); __bss_end = .; } - __end = . ; + _end = . ; } #if defined(CONFIG_SPL_MAX_FOOTPRINT) -ASSERT(__end - _start <= (CONFIG_SPL_MAX_FOOTPRINT), \ +ASSERT(_end - _start <= (CONFIG_SPL_MAX_FOOTPRINT), \ "SPL image plus BSS too big"); #endif diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds index 5dc09dbad2d..2b316cc7f5a 100644 --- a/arch/microblaze/cpu/u-boot.lds +++ b/arch/microblaze/cpu/u-boot.lds @@ -56,5 +56,5 @@ SECTIONS . = ALIGN(4); __bss_end = .; } - __end = . ; + _end = . ; } diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 16e0d0ef0a9..958018c1909 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -8,7 +8,7 @@ /* References to section boundaries */ -extern char __end[]; +extern char _end[]; extern char __text_start[]; /* Microblaze board initialization function */ diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig index 64507b5d843..17880661736 100644 --- a/board/xilinx/Kconfig +++ b/board/xilinx/Kconfig @@ -43,6 +43,7 @@ endif config XILINX_OF_BOARD_DTB_ADDR hex "Default DTB pickup address" default 0x1000 if ARCH_VERSAL + default 0x8000 if MICROBLAZE default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP depends on OF_BOARD || OF_SEPARATE help diff --git a/board/xilinx/microblaze-generic/Kconfig b/board/xilinx/microblaze-generic/Kconfig index f2fa0f72b13..e31257d3351 100644 --- a/board/xilinx/microblaze-generic/Kconfig +++ b/board/xilinx/microblaze-generic/Kconfig @@ -38,4 +38,20 @@ config XILINX_MICROBLAZE0_HW_VER string "Core version number" default "7.10.d" +config XILINX_MICROBLAZE0_USR_EXCEP + bool "MicroBlaze user exception support" + default y + help + Enable this option in order to install the user exception handler + (_exception_handler routine from arch/microblaze/cpu/exception.c) in + the exception vector table. The user exception vector is located at + C_BASE_VECTORS + 0x8 address. + +config XILINX_MICROBLAZE0_VECTOR_BASE_ADDR + hex "Location of MicroBlaze vectors" + default 0x0 + help + Memory address location of the exception vector table. It is + configurable via the C_BASE_VECTORS hdl parameter. + endif diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c index 6045eb2baa8..299e128f7b9 100644 --- a/board/xilinx/versal/board.c +++ b/board/xilinx/versal/board.c @@ -151,6 +151,8 @@ int board_late_init(void) case EMMC_MODE: puts("EMMC_MODE\n"); if (uclass_get_device_by_name(UCLASS_MMC, + "mmc@f1050000", &dev) && + uclass_get_device_by_name(UCLASS_MMC, "sdhci@f1050000", &dev)) { puts("Boot from EMMC but without SD1 enabled!\n"); return -1; @@ -162,6 +164,8 @@ int board_late_init(void) case SD_MODE: puts("SD_MODE\n"); if (uclass_get_device_by_name(UCLASS_MMC, + "mmc@f1040000", &dev) && + uclass_get_device_by_name(UCLASS_MMC, "sdhci@f1040000", &dev)) { puts("Boot from SD0 but without SD0 enabled!\n"); return -1; @@ -177,6 +181,8 @@ int board_late_init(void) case SD_MODE1: puts("SD_MODE1\n"); if (uclass_get_device_by_name(UCLASS_MMC, + "mmc@f1050000", &dev) && + uclass_get_device_by_name(UCLASS_MMC, "sdhci@f1050000", &dev)) { puts("Boot from SD1 but without SD1 enabled!\n"); return -1; @@ -263,13 +269,13 @@ enum env_location env_get_location(enum env_operation op, int prio) return ENVL_FAT; if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4)) return ENVL_EXT4; - return ENVL_UNKNOWN; + return ENVL_NOWHERE; case OSPI_MODE: case QSPI_MODE_24BIT: case QSPI_MODE_32BIT: if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) return ENVL_SPI_FLASH; - return ENVL_UNKNOWN; + return ENVL_NOWHERE; case JTAG_MODE: default: return ENVL_NOWHERE; diff --git a/board/xilinx/zynqmp/cmds.c b/board/xilinx/zynqmp/cmds.c index b15c0f599bd..5a277c712f6 100644 --- a/board/xilinx/zynqmp/cmds.c +++ b/board/xilinx/zynqmp/cmds.c @@ -211,7 +211,6 @@ static int do_zynqmp_pmufw(struct cmd_tbl *cmdtp, int flag, int argc, addr = hextoul(argv[2], NULL); size = hextoul(argv[3], NULL); - flush_dcache_range((ulong)addr, (ulong)(addr + size)); zynqmp_pmufw_load_config_object((const void *)(uintptr_t)addr, (size_t)size); diff --git a/board/xilinx/zynqmp/zynqmp-sm-k26-revA/psu_init_gpl.c b/board/xilinx/zynqmp/zynqmp-sm-k26-revA/psu_init_gpl.c index c448f2abb1a..ed025790bc3 100644 --- a/board/xilinx/zynqmp/zynqmp-sm-k26-revA/psu_init_gpl.c +++ b/board/xilinx/zynqmp/zynqmp-sm-k26-revA/psu_init_gpl.c @@ -9,33 +9,31 @@ static unsigned long psu_pll_init_data(void) { psu_mask_write(0xFF5E0034, 0xFE7FEDEFU, 0x7E4B0C62U); - psu_mask_write(0xFF5E0030, 0x00717F00U, 0x00014600U); + psu_mask_write(0xFF5E0030, 0x00717F00U, 0x00014000U); psu_mask_write(0xFF5E0030, 0x00000008U, 0x00000008U); psu_mask_write(0xFF5E0030, 0x00000001U, 0x00000001U); psu_mask_write(0xFF5E0030, 0x00000001U, 0x00000000U); mask_poll(0xFF5E0040, 0x00000002U); psu_mask_write(0xFF5E0030, 0x00000008U, 0x00000000U); - psu_mask_write(0xFF5E0048, 0x00003F00U, 0x00000300U); - psu_mask_write(0xFF5E0038, 0x8000FFFFU, 0x00000000U); + psu_mask_write(0xFF5E0048, 0x00003F00U, 0x00000200U); psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01012300U); - psu_mask_write(0xFF5E0024, 0xFE7FEDEFU, 0x7E672C6CU); - psu_mask_write(0xFF5E0020, 0x00717F00U, 0x00002D00U); + psu_mask_write(0xFF5E0024, 0xFE7FEDEFU, 0x7E4E2C62U); + psu_mask_write(0xFF5E0020, 0x00717F00U, 0x00013C00U); psu_mask_write(0xFF5E0020, 0x00000008U, 0x00000008U); psu_mask_write(0xFF5E0020, 0x00000001U, 0x00000001U); psu_mask_write(0xFF5E0020, 0x00000001U, 0x00000000U); mask_poll(0xFF5E0040, 0x00000001U); psu_mask_write(0xFF5E0020, 0x00000008U, 0x00000000U); - psu_mask_write(0xFF5E0044, 0x00003F00U, 0x00000300U); - psu_mask_write(0xFF5E0028, 0x8000FFFFU, 0x00000000U); + psu_mask_write(0xFF5E0044, 0x00003F00U, 0x00000200U); psu_mask_write(0xFD1A0024, 0xFE7FEDEFU, 0x7E4B0C62U); - psu_mask_write(0xFD1A0020, 0x00717F00U, 0x00014800U); + psu_mask_write(0xFD1A0020, 0x00717F00U, 0x00015000U); psu_mask_write(0xFD1A0020, 0x00000008U, 0x00000008U); psu_mask_write(0xFD1A0020, 0x00000001U, 0x00000001U); psu_mask_write(0xFD1A0020, 0x00000001U, 0x00000000U); mask_poll(0xFD1A0044, 0x00000001U); psu_mask_write(0xFD1A0020, 0x00000008U, 0x00000000U); psu_mask_write(0xFD1A0048, 0x00003F00U, 0x00000300U); - psu_mask_write(0xFD1A0028, 0x8000FFFFU, 0x00000000U); + psu_mask_write(0xFD1A0028, 0x8000FFFFU, 0x80000033U); psu_mask_write(0xFD1A0030, 0xFE7FEDEFU, 0x7E4B0C62U); psu_mask_write(0xFD1A002C, 0x00717F00U, 0x00014000U); psu_mask_write(0xFD1A002C, 0x00000008U, 0x00000008U); @@ -43,58 +41,43 @@ static unsigned long psu_pll_init_data(void) psu_mask_write(0xFD1A002C, 0x00000001U, 0x00000000U); mask_poll(0xFD1A0044, 0x00000002U); psu_mask_write(0xFD1A002C, 0x00000008U, 0x00000000U); - psu_mask_write(0xFD1A004C, 0x00003F00U, 0x00000300U); - psu_mask_write(0xFD1A0034, 0x8000FFFFU, 0x00000000U); - psu_mask_write(0xFD1A003C, 0xFE7FEDEFU, 0x7E4B0C62U); - psu_mask_write(0xFD1A0038, 0x00717F00U, 0x00014700U); + psu_mask_write(0xFD1A004C, 0x00003F00U, 0x00000200U); + psu_mask_write(0xFD1A003C, 0xFE7FEDEFU, 0x7E4B0C82U); + psu_mask_write(0xFD1A0038, 0x00717F00U, 0x00015A00U); psu_mask_write(0xFD1A0038, 0x00000008U, 0x00000008U); psu_mask_write(0xFD1A0038, 0x00000001U, 0x00000001U); psu_mask_write(0xFD1A0038, 0x00000001U, 0x00000000U); mask_poll(0xFD1A0044, 0x00000004U); psu_mask_write(0xFD1A0038, 0x00000008U, 0x00000000U); psu_mask_write(0xFD1A0050, 0x00003F00U, 0x00000300U); - psu_mask_write(0xFD1A0040, 0x8000FFFFU, 0x00000000U); return 1; } static unsigned long psu_clock_init_data(void) { - psu_mask_write(0xFF5E005C, 0x063F3F07U, 0x06010C00U); - psu_mask_write(0xFF5E0100, 0x013F3F07U, 0x01010600U); - psu_mask_write(0xFF5E0060, 0x023F3F07U, 0x02010600U); - psu_mask_write(0xFF5E004C, 0x023F3F07U, 0x020F0500U); - psu_mask_write(0xFF5E0068, 0x013F3F07U, 0x01010C00U); - psu_mask_write(0xFF5E006C, 0x013F3F07U, 0x01010800U); - psu_mask_write(0xFF5E0070, 0x013F3F07U, 0x01010800U); - psu_mask_write(0xFF18030C, 0x00020003U, 0x00000000U); - psu_mask_write(0xFF5E0078, 0x013F3F07U, 0x01010F00U); - psu_mask_write(0xFF5E0124, 0x013F3F07U, 0x01010F00U); - psu_mask_write(0xFF5E0080, 0x013F3F07U, 0x01010800U); - psu_mask_write(0xFF5E0090, 0x01003F07U, 0x01000302U); - psu_mask_write(0xFF5E009C, 0x01003F07U, 0x01000602U); - psu_mask_write(0xFF5E00A4, 0x01003F07U, 0x01000800U); - psu_mask_write(0xFF5E00A8, 0x01003F07U, 0x01000302U); - psu_mask_write(0xFF5E00AC, 0x01003F07U, 0x01000F02U); - psu_mask_write(0xFF5E00B0, 0x01003F07U, 0x01000602U); - psu_mask_write(0xFF5E00B8, 0x01003F07U, 0x01000302U); - psu_mask_write(0xFF5E00C0, 0x013F3F07U, 0x01010F00U); - psu_mask_write(0xFF5E00C4, 0x013F3F07U, 0x01040F00U); - psu_mask_write(0xFF5E00C8, 0x013F3F07U, 0x01010500U); - psu_mask_write(0xFF5E00CC, 0x013F3F07U, 0x01010400U); - psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01011D02U); + psu_mask_write(0xFF5E0068, 0x013F3F07U, 0x01010800U); + psu_mask_write(0xFF5E0078, 0x013F3F07U, 0x01010A00U); + psu_mask_write(0xFF5E0124, 0x013F3F07U, 0x01010A00U); + psu_mask_write(0xFF5E0080, 0x013F3F07U, 0x01010500U); + psu_mask_write(0xFF5E0090, 0x01003F07U, 0x01000200U); + psu_mask_write(0xFF5E009C, 0x01003F07U, 0x01000402U); + psu_mask_write(0xFF5E00A4, 0x01003F07U, 0x01000500U); + psu_mask_write(0xFF5E00A8, 0x01003F07U, 0x01000202U); + psu_mask_write(0xFF5E00AC, 0x01003F07U, 0x01000A02U); + psu_mask_write(0xFF5E00B0, 0x01003F07U, 0x01000402U); + psu_mask_write(0xFF5E00B8, 0x01003F07U, 0x01000202U); + psu_mask_write(0xFF5E00C0, 0x013F3F07U, 0x01010A00U); + psu_mask_write(0xFF5E00C4, 0x013F3F07U, 0x01010A00U); + psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01011402U); psu_mask_write(0xFF5E0104, 0x00000007U, 0x00000000U); - psu_mask_write(0xFF5E0128, 0x01003F07U, 0x01000F00U); - psu_mask_write(0xFD1A00A0, 0x01003F07U, 0x01000200U); - psu_mask_write(0xFD1A0070, 0x013F3F07U, 0x01010400U); - psu_mask_write(0xFD1A0074, 0x013F3F07U, 0x01011003U); - psu_mask_write(0xFD1A007C, 0x013F3F07U, 0x01010F03U); + psu_mask_write(0xFF5E0128, 0x01003F07U, 0x01000A00U); psu_mask_write(0xFD1A0060, 0x03003F07U, 0x03000100U); psu_mask_write(0xFD1A0068, 0x01003F07U, 0x01000200U); psu_mask_write(0xFD1A0080, 0x00003F07U, 0x00000200U); psu_mask_write(0xFD1A0084, 0x07003F07U, 0x07000100U); - psu_mask_write(0xFD1A00B8, 0x01003F07U, 0x01000200U); - psu_mask_write(0xFD1A00BC, 0x01003F07U, 0x01000200U); + psu_mask_write(0xFD1A00B8, 0x01003F07U, 0x01000203U); + psu_mask_write(0xFD1A00BC, 0x01003F07U, 0x01000300U); psu_mask_write(0xFD1A00C0, 0x01003F07U, 0x01000203U); psu_mask_write(0xFD1A00C4, 0x01003F07U, 0x01000502U); psu_mask_write(0xFD1A00F8, 0x00003F07U, 0x00000200U); @@ -133,8 +116,8 @@ static unsigned long psu_ddr_init_data(void) psu_mask_write(0xFD0700EC, 0xFFFF0000U, 0x08190000U); psu_mask_write(0xFD0700F0, 0x0000003FU, 0x00000010U); psu_mask_write(0xFD0700F4, 0x00000FFFU, 0x0000066FU); - psu_mask_write(0xFD070100, 0x7F3F7F3FU, 0x11102411U); - psu_mask_write(0xFD070104, 0x001F1F7FU, 0x00040419U); + psu_mask_write(0xFD070100, 0x7F3F7F3FU, 0x11102412U); + psu_mask_write(0xFD070104, 0x001F1F7FU, 0x0004041AU); psu_mask_write(0xFD070108, 0x3F3F3F3FU, 0x0708060DU); psu_mask_write(0xFD07010C, 0x3FF3F3FFU, 0x0050400CU); psu_mask_write(0xFD070110, 0x1F0F0F1FU, 0x08030409U); @@ -234,14 +217,14 @@ static unsigned long psu_ddr_init_data(void) psu_mask_write(0xFD080068, 0xFFFFFFFFU, 0x01100000U); psu_mask_write(0xFD080090, 0xFFFFFFFFU, 0x02A04161U); psu_mask_write(0xFD0800C0, 0xFFFFFFFFU, 0x00000000U); - psu_mask_write(0xFD0800C4, 0xFFFFFFFFU, 0x000000E3U); + psu_mask_write(0xFD0800C4, 0xFFFFFFFFU, 0x000000E4U); psu_mask_write(0xFD080100, 0xFFFFFFFFU, 0x0800040CU); - psu_mask_write(0xFD080110, 0xFFFFFFFFU, 0x07221008U); + psu_mask_write(0xFD080110, 0xFFFFFFFFU, 0x07241008U); psu_mask_write(0xFD080114, 0xFFFFFFFFU, 0x28200008U); psu_mask_write(0xFD080118, 0xFFFFFFFFU, 0x000F0300U); psu_mask_write(0xFD08011C, 0xFFFFFFFFU, 0x83000800U); psu_mask_write(0xFD080120, 0xFFFFFFFFU, 0x01762B07U); - psu_mask_write(0xFD080124, 0xFFFFFFFFU, 0x00311008U); + psu_mask_write(0xFD080124, 0xFFFFFFFFU, 0x00331008U); psu_mask_write(0xFD080128, 0xFFFFFFFFU, 0x00000E10U); psu_mask_write(0xFD080140, 0xFFFFFFFFU, 0x08400020U); psu_mask_write(0xFD080144, 0xFFFFFFFFU, 0x00000C80U); @@ -407,90 +390,63 @@ static unsigned long psu_mio_init_data(void) psu_mask_write(0xFF180028, 0x000000FEU, 0x00000080U); psu_mask_write(0xFF18002C, 0x000000FEU, 0x00000080U); psu_mask_write(0xFF180030, 0x000000FEU, 0x00000000U); - psu_mask_write(0xFF180034, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF180038, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF18003C, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF180040, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF180044, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF180048, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF18004C, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF180050, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF180054, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF180058, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF18005C, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180034, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180038, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF18003C, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180040, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180044, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180048, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF18004C, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180050, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180054, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180058, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF18005C, 0x000000FEU, 0x00000000U); psu_mask_write(0xFF180060, 0x000000FEU, 0x00000040U); psu_mask_write(0xFF180064, 0x000000FEU, 0x00000040U); psu_mask_write(0xFF180068, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF18006C, 0x000000FEU, 0x00000018U); - psu_mask_write(0xFF180070, 0x000000FEU, 0x00000018U); - psu_mask_write(0xFF180074, 0x000000FEU, 0x00000018U); - psu_mask_write(0xFF180078, 0x000000FEU, 0x00000018U); + psu_mask_write(0xFF18006C, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180070, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180074, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180078, 0x000000FEU, 0x00000000U); psu_mask_write(0xFF18007C, 0x000000FEU, 0x00000008U); psu_mask_write(0xFF180080, 0x000000FEU, 0x00000008U); psu_mask_write(0xFF180084, 0x000000FEU, 0x00000008U); psu_mask_write(0xFF180090, 0x000000FEU, 0x000000C0U); psu_mask_write(0xFF180094, 0x000000FEU, 0x000000C0U); psu_mask_write(0xFF180098, 0x000000FEU, 0x00000000U); - psu_mask_write(0xFF18009C, 0x000000FEU, 0x00000010U); - psu_mask_write(0xFF1800A0, 0x000000FEU, 0x00000010U); - psu_mask_write(0xFF1800A4, 0x000000FEU, 0x00000010U); - psu_mask_write(0xFF1800A8, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF18009C, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF1800A0, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF1800A4, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF1800A8, 0x000000FEU, 0x00000000U); psu_mask_write(0xFF1800AC, 0x000000FEU, 0x00000000U); psu_mask_write(0xFF1800B0, 0x000000FEU, 0x00000000U); - psu_mask_write(0xFF1800B4, 0x000000FEU, 0x00000010U); - psu_mask_write(0xFF1800B8, 0x000000FEU, 0x00000010U); - psu_mask_write(0xFF1800BC, 0x000000FEU, 0x00000010U); - psu_mask_write(0xFF1800C0, 0x000000FEU, 0x00000010U); - psu_mask_write(0xFF1800C4, 0x000000FEU, 0x00000010U); - psu_mask_write(0xFF1800C8, 0x000000FEU, 0x00000010U); - psu_mask_write(0xFF1800CC, 0x000000FEU, 0x00000010U); - psu_mask_write(0xFF1800D0, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF1800D4, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF1800D8, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF1800DC, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF1800E0, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF1800E4, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF1800E8, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF1800EC, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF1800F0, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF1800F4, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF1800F8, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF1800FC, 0x000000FEU, 0x00000004U); - psu_mask_write(0xFF180100, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF180104, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF180108, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF18010C, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF180110, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF180114, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF180118, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF18011C, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF180120, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF180124, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF180128, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF18012C, 0x000000FEU, 0x00000002U); - psu_mask_write(0xFF180130, 0x000000FEU, 0x000000C0U); - psu_mask_write(0xFF180134, 0x000000FEU, 0x000000C0U); - psu_mask_write(0xFF180204, 0xFFFFFFFFU, 0xD4000000U); - psu_mask_write(0xFF180208, 0xFFFFFFFFU, 0x00B02020U); - psu_mask_write(0xFF18020C, 0x00003FFFU, 0x00000FC0U); - psu_mask_write(0xFF180138, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF1800B4, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF1800B8, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF1800BC, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF1800C0, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF1800C4, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF1800C8, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF1800CC, 0x000000FEU, 0x00000000U); + psu_mask_write(0xFF180204, 0xFFFFFFFFU, 0x84000000U); + psu_mask_write(0xFF180208, 0x000FFFFFU, 0x00000020U); + psu_mask_write(0xFF180138, 0x03FFFFFFU, 0x00000000U); psu_mask_write(0xFF18013C, 0x03FFFFFFU, 0x03FFFFFFU); psu_mask_write(0xFF180140, 0x03FFFFFFU, 0x00000000U); psu_mask_write(0xFF180144, 0x03FFFFFFU, 0x03FFFFFFU); psu_mask_write(0xFF180148, 0x03FFFFFFU, 0x03FFFFFFU); - psu_mask_write(0xFF18014C, 0x03FFFFFFU, 0x00000000U); - psu_mask_write(0xFF180154, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF18014C, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180154, 0x03FFFFFFU, 0x00080835U); psu_mask_write(0xFF180158, 0x03FFFFFFU, 0x03FFFFFFU); psu_mask_write(0xFF18015C, 0x03FFFFFFU, 0x00000000U); psu_mask_write(0xFF180160, 0x03FFFFFFU, 0x03FFFFFFU); psu_mask_write(0xFF180164, 0x03FFFFFFU, 0x03FFFFFFU); - psu_mask_write(0xFF180168, 0x03FFFFFFU, 0x00000000U); - psu_mask_write(0xFF180170, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180168, 0x03FFFFFFU, 0x03F7F7CAU); + psu_mask_write(0xFF180170, 0x03FFFFFFU, 0x00FC000BU); psu_mask_write(0xFF180174, 0x03FFFFFFU, 0x03FFFFFFU); psu_mask_write(0xFF180178, 0x03FFFFFFU, 0x00000000U); psu_mask_write(0xFF18017C, 0x03FFFFFFU, 0x03FFFFFFU); - psu_mask_write(0xFF180180, 0x03FFFFFFU, 0x0357FFFFU); - psu_mask_write(0xFF180184, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF180180, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180184, 0x03FFFFFFU, 0x0303FFF4U); psu_mask_write(0xFF180200, 0x0000000FU, 0x00000000U); return 1; @@ -506,24 +462,15 @@ static unsigned long psu_peripherals_pre_init_data(void) static unsigned long psu_peripherals_init_data(void) { - psu_mask_write(0xFD1A0100, 0x0001007EU, 0x00000000U); + psu_mask_write(0xFD1A0100, 0x0000807CU, 0x00000000U); psu_mask_write(0xFF5E0238, 0x001A0000U, 0x00000000U); psu_mask_write(0xFF5E023C, 0x0093C018U, 0x00000000U); - psu_mask_write(0xFF5E0230, 0x00000008U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00000001U, 0x00000000U); psu_mask_write(0xFF180390, 0x00000004U, 0x00000004U); - psu_mask_write(0xFF5E023C, 0x00000400U, 0x00000000U); - psu_mask_write(0xFF5E0238, 0x00000060U, 0x00000000U); - psu_mask_write(0xFF180310, 0x00008001U, 0x00000001U); - psu_mask_write(0xFF180320, 0x33843384U, 0x02841284U); - psu_mask_write(0xFF18031C, 0x00007FFEU, 0x00006450U); - psu_mask_write(0xFF180358, 0x00080000U, 0x00080000U); - psu_mask_write(0xFF18031C, 0x7FFE0000U, 0x64500000U); - psu_mask_write(0xFF180358, 0x00000008U, 0x00000008U); - psu_mask_write(0xFF180324, 0x000003C0U, 0x00000000U); - psu_mask_write(0xFF180324, 0x03C00000U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00000400U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00008000U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00000010U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00007800U, 0x00000000U); psu_mask_write(0xFF5E0238, 0x00000004U, 0x00000000U); psu_mask_write(0xFF010034, 0x000000FFU, 0x00000006U); psu_mask_write(0xFF010018, 0x0000FFFFU, 0x0000007CU); @@ -536,13 +483,6 @@ static unsigned long psu_peripherals_init_data(void) psu_mask_write(0xFFA60040, 0x80000000U, 0x80000000U); psu_mask_write(0xFF260020, 0xFFFFFFFFU, 0x05F5DD18U); psu_mask_write(0xFF260000, 0x00000001U, 0x00000001U); - psu_mask_write(0xFF0A0244, 0x03FFFFFFU, 0x00040000U); - psu_mask_write(0xFF0A0248, 0x03FFFFFFU, 0x00040000U); - psu_mask_write(0xFF0A000C, 0x03FF03FFU, 0x03FB0004U); - mask_delay(1); - psu_mask_write(0xFF0A000C, 0x03FF03FFU, 0x03FB0000U); - mask_delay(5); - psu_mask_write(0xFF0A000C, 0x03FF03FFU, 0x03FB0004U); return 1; } diff --git a/drivers/clk/clk_zynqmp.c b/drivers/clk/clk_zynqmp.c index 52fecec7a7a..9038fb8befd 100644 --- a/drivers/clk/clk_zynqmp.c +++ b/drivers/clk/clk_zynqmp.c @@ -130,8 +130,8 @@ enum zynqmp_clk { csu_spb, csu_pll, pcap, iou_switch, gem_tsu_ref, gem_tsu, - gem0_ref, gem1_ref, gem2_ref, gem3_ref, gem0_tx, gem1_tx, gem2_tx, gem3_tx, + gem0_rx, gem1_rx, gem2_rx, gem3_rx, qspi_ref, sdio0_ref, sdio1_ref, uart0_ref, uart1_ref, @@ -144,6 +144,8 @@ enum zynqmp_clk { ams_ref, pl0, pl1, pl2, pl3, wdt, + gem0_ref = 104, + gem1_ref, gem2_ref, gem3_ref, clk_max, }; @@ -161,14 +163,18 @@ static const char * const clk_names[clk_max] = { "usb1_bus_ref", "usb3_dual_ref", "usb0", "usb1", "cpu_r5", "cpu_r5_core", "csu_spb", "csu_pll", "pcap", "iou_switch", "gem_tsu_ref", - "gem_tsu", "gem0_ref", "gem1_ref", "gem2_ref", - "gem3_ref", "gem0_tx", "gem1_tx", "gem2_tx", - "gem3_tx", "qspi_ref", "sdio0_ref", "sdio1_ref", + "gem_tsu", "gem0_tx", "gem1_tx", "gem2_tx", + "gem3_tx", "gem0_rx", "gem1_rx", "gem2_rx", + "gem3_rx", "qspi_ref", "sdio0_ref", "sdio1_ref", "uart0_ref", "uart1_ref", "spi0_ref", "spi1_ref", "nand_ref", "i2c0_ref", "i2c1_ref", "can0_ref", "can1_ref", "can0", "can1", "dll_ref", "adma_ref", "timestamp_ref", - "ams_ref", "pl0", "pl1", "pl2", "pl3", "wdt" + "ams_ref", "pl0", "pl1", "pl2", "pl3", "wdt", + NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, "gem0_ref", "gem1_ref", "gem2_ref", "gem3_ref", }; static const u32 pll_src[][4] = { @@ -258,12 +264,16 @@ static u32 zynqmp_clk_get_register(enum zynqmp_clk id) return CRL_APB_USB3_DUAL_REF_CTRL; case gem_tsu_ref: return CRL_APB_GEM_TSU_REF_CTRL; + case gem0_tx: case gem0_ref: return CRL_APB_GEM0_REF_CTRL; + case gem1_tx: case gem1_ref: return CRL_APB_GEM1_REF_CTRL; + case gem2_tx: case gem2_ref: return CRL_APB_GEM2_REF_CTRL; + case gem3_tx: case gem3_ref: return CRL_APB_GEM3_REF_CTRL; case usb0_bus_ref: @@ -665,6 +675,7 @@ static ulong zynqmp_clk_get_rate(struct clk *clk) case gem_tsu_ref: case pl0 ... pl3: case gem0_ref ... gem3_ref: + case gem0_tx ... gem3_tx: case qspi_ref ... can1_ref: case usb0_bus_ref ... usb3_dual_ref: two_divs = true; @@ -698,7 +709,9 @@ static ulong zynqmp_clk_set_rate(struct clk *clk, ulong rate) switch (id) { case gem0_ref ... gem3_ref: + case gem0_tx ... gem3_tx: case qspi_ref ... can1_ref: + case usb0_bus_ref ... usb3_dual_ref: return zynqmp_clk_set_peripheral_rate(priv, id, rate, two_divs); default: @@ -808,6 +821,7 @@ static int zynqmp_clk_enable(struct clk *clk) clkact_shift = 25; mask = 0x1; break; + case gem0_tx ... gem3_tx: case gem0_ref ... gem3_ref: clkact_shift = 25; mask = 0x3; diff --git a/drivers/firmware/firmware-zynqmp.c b/drivers/firmware/firmware-zynqmp.c index b44fede3079..839203ec82a 100644 --- a/drivers/firmware/firmware-zynqmp.c +++ b/drivers/firmware/firmware-zynqmp.c @@ -6,6 +6,7 @@ */ #include <common.h> +#include <cpu_func.h> #include <dm.h> #include <log.h> #include <zynqmp_firmware.h> @@ -19,6 +20,7 @@ #define PMUFW_PAYLOAD_ARG_CNT 8 #define XST_PM_NO_ACCESS 2002L +#define XST_PM_ALREADY_CONFIGURED 2009L struct zynqmp_power { struct mbox_chan tx_chan; @@ -97,7 +99,10 @@ void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) int err; u32 ret_payload[PAYLOAD_ARG_CNT]; - printf("Loading new PMUFW cfg obj (%ld bytes)\n", size); + if (IS_ENABLED(CONFIG_SPL_BUILD)) + printf("Loading new PMUFW cfg obj (%ld bytes)\n", size); + + flush_dcache_range((ulong)cfg_obj, (ulong)(cfg_obj + size)); err = xilinx_pm_request(PM_SET_CONFIGURATION, (u32)(u64)cfg_obj, 0, 0, 0, ret_payload); @@ -106,6 +111,11 @@ void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) return; } + if (err == XST_PM_ALREADY_CONFIGURED) { + debug("PMUFW Node is already configured\n"); + return; + } + if (err) printf("Cannot load PMUFW configuration object (%d)\n", err); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b41a755fc75..305a2dc5633 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -528,4 +528,13 @@ config NOMADIK_GPIO into a number of banks each with 32 GPIOs. The GPIOs for a device are defined in the device tree with one node for each bank. +config ZYNQMP_GPIO_MODEPIN + bool "ZynqMP gpio modepin" + depends on DM_GPIO + help + This config enables the ZynqMP gpio modepin driver. ZynqMP modepin + driver will set and get the status of PS_MODE pins. These modepins + are accessed using xilinx firmware. In modepin register, [3:0] bits + set direction, [7:4] bits read IO, [11:8] bits set/clear IO. + endif diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 3c851b38c7c..3eb77f58c11 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -69,3 +69,4 @@ obj-$(CONFIG_NX_GPIO) += nx_gpio.o obj-$(CONFIG_SIFIVE_GPIO) += sifive-gpio.o obj-$(CONFIG_NOMADIK_GPIO) += nmk_gpio.o obj-$(CONFIG_MAX7320_GPIO) += max7320_gpio.o +obj-$(CONFIG_ZYNQMP_GPIO_MODEPIN) += zynqmp_gpio_modepin.o diff --git a/drivers/gpio/zynqmp_gpio_modepin.c b/drivers/gpio/zynqmp_gpio_modepin.c new file mode 100644 index 00000000000..078fd833959 --- /dev/null +++ b/drivers/gpio/zynqmp_gpio_modepin.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ZynqMP GPIO modepin driver + * + * Copyright (C) 2021 Xilinx, Inc. + */ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <dm.h> +#include <asm/arch/hardware.h> +#include <zynqmp_firmware.h> + +#define OUTEN(pin) (BIT(0) << (pin)) +#define INVAL(pin) (BIT(4) << (pin)) +#define OUTVAL(pin) (BIT(8) << (pin)) + +#define ZYNQMP_CRL_APB_BOOTPIN_CTRL_MASK 0xF0F +#define ZYNQMP_CRL_APB_BOOT_PIN_CTRL (ZYNQMP_CRL_APB_BASEADDR + \ + (0x250U)) + +static int get_gpio_modepin(u32 *ret_payload) +{ + return xilinx_pm_request(PM_MMIO_READ, ZYNQMP_CRL_APB_BOOT_PIN_CTRL, + 0, 0, 0, ret_payload); +} + +static int set_gpio_modepin(int val) +{ + return xilinx_pm_request(PM_MMIO_WRITE, ZYNQMP_CRL_APB_BOOT_PIN_CTRL, + ZYNQMP_CRL_APB_BOOTPIN_CTRL_MASK, + val, 0, NULL); +} + +static int modepin_gpio_direction_input(struct udevice *dev, + unsigned int offset) +{ + return 0; +} + +static int modepin_gpio_set_value(struct udevice *dev, unsigned int offset, + int value) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + u32 out_val = 0; + int ret; + + ret = get_gpio_modepin(ret_payload); + if (value) + out_val = OUTVAL(offset) | ret_payload[1]; + else + out_val = ~OUTVAL(offset) & ret_payload[1]; + + return set_gpio_modepin(out_val); +} + +static int modepin_gpio_direction_output(struct udevice *dev, + unsigned int offset, int value) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + u32 out_en = 0; + int ret; + + ret = get_gpio_modepin(ret_payload); + if (ret) + return ret; + + if (value) + out_en = OUTEN(offset) | ret_payload[1]; + else + out_en = ~OUTEN(offset) & ret_payload[1]; + + ret = set_gpio_modepin(out_en); + if (ret) + return ret; + + return modepin_gpio_set_value(dev, offset, value); +} + +static int modepin_gpio_xlate(struct udevice *dev, struct gpio_desc *desc, + struct ofnode_phandle_args *args) +{ + desc->offset = args->args[0]; + + return 0; +} + +static int modepin_gpio_get_value(struct udevice *dev, unsigned int offset) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + ret = get_gpio_modepin(ret_payload); + if (ret) + return ret; + + return (INVAL(offset) & ret_payload[1]) ? 1 : 0; +} + +static int modepin_gpio_get_function(struct udevice *dev, unsigned int offset) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + ret = get_gpio_modepin(ret_payload); + if (ret) + return ret; + + return (OUTEN(offset) & ret_payload[1]) ? GPIOF_OUTPUT : GPIOF_INPUT; +} + +static const struct dm_gpio_ops modepin_gpio_ops = { + .direction_input = modepin_gpio_direction_input, + .direction_output = modepin_gpio_direction_output, + .get_value = modepin_gpio_get_value, + .set_value = modepin_gpio_set_value, + .get_function = modepin_gpio_get_function, + .xlate = modepin_gpio_xlate, +}; + +static int modepin_gpio_probe(struct udevice *dev) +{ + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); + const void *label_ptr; + + label_ptr = dev_read_prop(dev, "label", NULL); + if (label_ptr) { + uc_priv->bank_name = strdup(label_ptr); + if (!uc_priv->bank_name) + return -ENOMEM; + } else { + uc_priv->bank_name = dev->name; + } + + uc_priv->gpio_count = 4; + + return 0; +} + +static const struct udevice_id modepin_gpio_ids[] = { + { .compatible = "xlnx,zynqmp-gpio-modepin",}, + { } +}; + +U_BOOT_DRIVER(modepin_gpio) = { + .name = "modepin_gpio", + .id = UCLASS_GPIO, + .ops = &modepin_gpio_ops, + .of_match = modepin_gpio_ids, + .probe = modepin_gpio_probe, +}; diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index c309c3c9549..3118d147266 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -12,6 +12,7 @@ #include <common.h> #include <cpu_func.h> #include <dm.h> +#include <generic-phy.h> #include <log.h> #include <net.h> #include <netdev.h> @@ -21,6 +22,7 @@ #include <asm/cache.h> #include <asm/io.h> #include <phy.h> +#include <reset.h> #include <miiphy.h> #include <wait_bit.h> #include <watchdog.h> @@ -60,7 +62,6 @@ #define ZYNQ_GEM_NWCFG_SPEED100 0x00000001 /* 100 Mbps operation */ #define ZYNQ_GEM_NWCFG_SPEED1000 0x00000400 /* 1Gbps operation */ #define ZYNQ_GEM_NWCFG_FDEN 0x00000002 /* Full Duplex mode */ -#define ZYNQ_GEM_NWCFG_NO_BRDC BIT(5) /* No broadcast */ #define ZYNQ_GEM_NWCFG_FSREM 0x00020000 /* FCS removal */ #define ZYNQ_GEM_NWCFG_SGMII_ENBL 0x08000000 /* SGMII Enable */ #define ZYNQ_GEM_NWCFG_PCS_SEL 0x00000800 /* PCS select */ @@ -78,7 +79,6 @@ #define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_DBUS_WIDTH | \ ZYNQ_GEM_NWCFG_FDEN | \ - ZYNQ_GEM_NWCFG_NO_BRDC | \ ZYNQ_GEM_NWCFG_FSREM | \ ZYNQ_GEM_NWCFG_MDCCLKDIV) @@ -110,6 +110,8 @@ #define ZYNQ_GEM_DCFG_DBG6_DMA_64B BIT(23) +#define MDIO_IDLE_TIMEOUT_MS 100 + /* Use MII register 1 (MII status register) to detect PHY */ #define PHY_DETECT_REG 1 @@ -215,6 +217,7 @@ struct zynq_gem_priv { bool int_pcs; bool dma_64bit; u32 clk_en_info; + struct reset_ctl_bulk resets; }; static int phy_setup_op(struct zynq_gem_priv *priv, u32 phy_addr, u32 regnum, @@ -225,7 +228,7 @@ static int phy_setup_op(struct zynq_gem_priv *priv, u32 phy_addr, u32 regnum, int err; err = wait_for_bit_le32(®s->nwsr, ZYNQ_GEM_NWSR_MDIOIDLE_MASK, - true, 20000, false); + true, MDIO_IDLE_TIMEOUT_MS, false); if (err) return err; @@ -238,7 +241,7 @@ static int phy_setup_op(struct zynq_gem_priv *priv, u32 phy_addr, u32 regnum, writel(mgtcr, ®s->phymntnc); err = wait_for_bit_le32(®s->nwsr, ZYNQ_GEM_NWSR_MDIOIDLE_MASK, - true, 20000, false); + true, MDIO_IDLE_TIMEOUT_MS, false); if (err) return err; @@ -333,7 +336,8 @@ static int zynq_phy_init(struct udevice *dev) ADVERTISED_Asym_Pause; priv->phydev->advertising = priv->phydev->supported; - priv->phydev->node = priv->phy_of_node; + if (!ofnode_valid(priv->phydev->node)) + priv->phydev->node = priv->phy_of_node; return phy_config(priv->phydev); } @@ -686,11 +690,48 @@ static int zynq_gem_miiphy_write(struct mii_dev *bus, int addr, int devad, return phywrite(priv, addr, reg, value); } +static int zynq_gem_reset_init(struct udevice *dev) +{ + struct zynq_gem_priv *priv = dev_get_priv(dev); + int ret; + + ret = reset_get_bulk(dev, &priv->resets); + if (ret == -ENOTSUPP || ret == -ENOENT) + return 0; + else if (ret) + return ret; + + ret = reset_deassert_bulk(&priv->resets); + if (ret) { + reset_release_bulk(&priv->resets); + return ret; + } + + return 0; +} + static int zynq_gem_probe(struct udevice *dev) { void *bd_space; struct zynq_gem_priv *priv = dev_get_priv(dev); int ret; + struct phy phy; + + if (priv->interface == PHY_INTERFACE_MODE_SGMII) { + ret = generic_phy_get_by_index(dev, 0, &phy); + if (!ret) { + ret = generic_phy_init(&phy); + if (ret) + return ret; + } else if (ret != -ENOENT) { + debug("could not get phy (err %d)\n", ret); + return ret; + } + } + + ret = zynq_gem_reset_init(dev); + if (ret) + return ret; /* Align rxbuffers to ARCH_DMA_MINALIGN */ priv->rxbuffers = memalign(ARCH_DMA_MINALIGN, RX_BUF * PKTSIZE_ALIGN); @@ -743,6 +784,12 @@ static int zynq_gem_probe(struct udevice *dev) if (ret) goto err3; + if (priv->interface == PHY_INTERFACE_MODE_SGMII && phy.dev) { + ret = generic_phy_power_on(&phy); + if (ret) + return ret; + } + return ret; err3: @@ -802,6 +849,9 @@ static int zynq_gem_of_to_plat(struct udevice *dev) SPEED_1000); parent = ofnode_get_parent(phandle_args.node); + if (ofnode_name_eq(parent, "mdio")) + parent = ofnode_get_parent(parent); + addr = ofnode_get_addr(parent); if (addr != FDT_ADDR_T_NONE) { debug("MDIO bus not found %s\n", dev->name); diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 4767d215f33..d79798429b1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -281,6 +281,13 @@ config PHY_IMX8MQ_USB help Support the USB3.0 PHY in NXP i.MX8MQ SoC +config PHY_XILINX_ZYNQMP + tristate "Xilinx ZynqMP PHY driver" + depends on PHY && ARCH_ZYNQMP + help + Enable this to support ZynqMP High Speed Gigabit Transceiver + that is part of ZynqMP SoC. + source "drivers/phy/rockchip/Kconfig" source "drivers/phy/cadence/Kconfig" source "drivers/phy/ti/Kconfig" diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 13a8ade8919..bf9b40932fe 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -38,5 +38,6 @@ obj-$(CONFIG_MT76X8_USB_PHY) += mt76x8-usb-phy.o obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o obj-$(CONFIG_PHY_IMX8MQ_USB) += phy-imx8mq-usb.o +obj-$(CONFIG_PHY_XILINX_ZYNQMP) += phy-zynqmp.o obj-y += cadence/ obj-y += ti/ diff --git a/drivers/phy/phy-zynqmp.c b/drivers/phy/phy-zynqmp.c new file mode 100644 index 00000000000..9dc3d426a3d --- /dev/null +++ b/drivers/phy/phy-zynqmp.c @@ -0,0 +1,754 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * phy-zynqmp.c - PHY driver for Xilinx ZynqMP GT. + * + * Copyright (C) 2018-2021 Xilinx Inc. + * + * Author: Anurag Kumar Vulisha <anuragku@xilinx.com> + * Author: Subbaraya Sundeep <sundeep.lkml@gmail.com> + * Author: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <generic-phy.h> +#include <log.h> +#include <power-domain.h> +#include <regmap.h> +#include <syscon.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <dm/device.h> +#include <dm/device_compat.h> +#include <dm/lists.h> +#include <dt-bindings/phy/phy.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/err.h> + +/* + * Lane Registers + */ + +/* TX De-emphasis parameters */ +#define L0_TX_ANA_TM_18 0x0048 +#define L0_TX_ANA_TM_118 0x01d8 +#define L0_TX_ANA_TM_118_FORCE_17_0 BIT(0) + +/* DN Resistor calibration code parameters */ +#define L0_TXPMA_ST_3 0x0b0c +#define L0_DN_CALIB_CODE 0x3f + +/* PMA control parameters */ +#define L0_TXPMD_TM_45 0x0cb4 +#define L0_TXPMD_TM_48 0x0cc0 +#define L0_TXPMD_TM_45_OVER_DP_MAIN BIT(0) +#define L0_TXPMD_TM_45_ENABLE_DP_MAIN BIT(1) +#define L0_TXPMD_TM_45_OVER_DP_POST1 BIT(2) +#define L0_TXPMD_TM_45_ENABLE_DP_POST1 BIT(3) +#define L0_TXPMD_TM_45_OVER_DP_POST2 BIT(4) +#define L0_TXPMD_TM_45_ENABLE_DP_POST2 BIT(5) + +/* PCS control parameters */ +#define L0_TM_DIG_6 0x106c +#define L0_TM_DIS_DESCRAMBLE_DECODER 0x0f +#define L0_TX_DIG_61 0x00f4 +#define L0_TM_DISABLE_SCRAMBLE_ENCODER 0x0f + +/* PLL Test Mode register parameters */ +#define L0_TM_PLL_DIG_37 0x2094 +#define L0_TM_COARSE_CODE_LIMIT 0x10 + +/* PLL SSC step size offsets */ +#define L0_PLL_SS_STEPS_0_LSB 0x2368 +#define L0_PLL_SS_STEPS_1_MSB 0x236c +#define L0_PLL_SS_STEP_SIZE_0_LSB 0x2370 +#define L0_PLL_SS_STEP_SIZE_1 0x2374 +#define L0_PLL_SS_STEP_SIZE_2 0x2378 +#define L0_PLL_SS_STEP_SIZE_3_MSB 0x237c +#define L0_PLL_STATUS_READ_1 0x23e4 + +/* SSC step size parameters */ +#define STEP_SIZE_0_MASK 0xff +#define STEP_SIZE_1_MASK 0xff +#define STEP_SIZE_2_MASK 0xff +#define STEP_SIZE_3_MASK 0x3 +#define STEP_SIZE_SHIFT 8 +#define FORCE_STEP_SIZE 0x10 +#define FORCE_STEPS 0x20 +#define STEPS_0_MASK 0xff +#define STEPS_1_MASK 0x07 + +/* Reference clock selection parameters */ +#define L0_Ln_REF_CLK_SEL(n) (0x2860 + (n) * 4) +#define L0_REF_CLK_SEL_MASK 0x8f + +/* Calibration digital logic parameters */ +#define L3_TM_CALIB_DIG19 0xec4c +#define L3_CALIB_DONE_STATUS 0xef14 +#define L3_TM_CALIB_DIG18 0xec48 +#define L3_TM_CALIB_DIG19_NSW 0x07 +#define L3_TM_CALIB_DIG18_NSW 0xe0 +#define L3_TM_OVERRIDE_NSW_CODE 0x20 +#define L3_CALIB_DONE 0x02 +#define L3_NSW_SHIFT 5 +#define L3_NSW_PIPE_SHIFT 4 +#define L3_NSW_CALIB_SHIFT 3 + +#define PHY_REG_OFFSET 0x4000 + +/* + * Global Registers + */ + +/* Refclk selection parameters */ +#define PLL_REF_SEL(n) (0x10000 + (n) * 4) +#define PLL_FREQ_MASK 0x1f +#define PLL_STATUS_LOCKED 0x10 + +/* Inter Connect Matrix parameters */ +#define ICM_CFG0 0x10010 +#define ICM_CFG1 0x10014 +#define ICM_CFG0_L0_MASK 0x07 +#define ICM_CFG0_L1_MASK 0x70 +#define ICM_CFG1_L2_MASK 0x07 +#define ICM_CFG2_L3_MASK 0x70 +#define ICM_CFG_SHIFT 4 + +/* Inter Connect Matrix allowed protocols */ +#define ICM_PROTOCOL_PD 0x0 +#define ICM_PROTOCOL_PCIE 0x1 +#define ICM_PROTOCOL_SATA 0x2 +#define ICM_PROTOCOL_USB 0x3 +#define ICM_PROTOCOL_DP 0x4 +#define ICM_PROTOCOL_SGMII 0x5 + +/* Test Mode common reset control parameters */ +#define TM_CMN_RST 0x10018 +#define TM_CMN_RST_EN 0x1 +#define TM_CMN_RST_SET 0x2 +#define TM_CMN_RST_MASK 0x3 + +/* Bus width parameters */ +#define TX_PROT_BUS_WIDTH 0x10040 +#define RX_PROT_BUS_WIDTH 0x10044 +#define PROT_BUS_WIDTH_10 0x0 +#define PROT_BUS_WIDTH_20 0x1 +#define PROT_BUS_WIDTH_40 0x2 +#define PROT_BUS_WIDTH_MASK 0x3 +#define PROT_BUS_WIDTH_SHIFT 2 + +/* Number of GT lanes */ +#define NUM_LANES 4 + +/* SIOU SATA control register */ +#define SATA_CONTROL_OFFSET 0x0100 + +/* Total number of controllers */ +#define CONTROLLERS_PER_LANE 5 + +/* Protocol Type parameters */ +enum { + XPSGTR_TYPE_USB0 = 0, /* USB controller 0 */ + XPSGTR_TYPE_USB1 = 1, /* USB controller 1 */ + XPSGTR_TYPE_SATA_0 = 2, /* SATA controller lane 0 */ + XPSGTR_TYPE_SATA_1 = 3, /* SATA controller lane 1 */ + XPSGTR_TYPE_PCIE_0 = 4, /* PCIe controller lane 0 */ + XPSGTR_TYPE_PCIE_1 = 5, /* PCIe controller lane 1 */ + XPSGTR_TYPE_PCIE_2 = 6, /* PCIe controller lane 2 */ + XPSGTR_TYPE_PCIE_3 = 7, /* PCIe controller lane 3 */ + XPSGTR_TYPE_DP_0 = 8, /* Display Port controller lane 0 */ + XPSGTR_TYPE_DP_1 = 9, /* Display Port controller lane 1 */ + XPSGTR_TYPE_SGMII0 = 10, /* Ethernet SGMII controller 0 */ + XPSGTR_TYPE_SGMII1 = 11, /* Ethernet SGMII controller 1 */ + XPSGTR_TYPE_SGMII2 = 12, /* Ethernet SGMII controller 2 */ + XPSGTR_TYPE_SGMII3 = 13, /* Ethernet SGMII controller 3 */ +}; + +/* Timeout values */ +#define TIMEOUT_US 1000 + +#define IOU_SLCR_GEM_CLK_CTRL 0x308 +#define GEM_CTRL_GEM_SGMII_MODE BIT(2) +#define GEM_CTRL_GEM_REF_SRC_SEL BIT(1) + +#define IOU_SLCR_GEM_CTRL 0x360 +#define GEM_CTRL_GEM_SGMII_SD BIT(0) + +/** + * struct xpsgtr_ssc - structure to hold SSC settings for a lane + * @refclk_rate: PLL reference clock frequency + * @pll_ref_clk: value to be written to register for corresponding ref clk rate + * @steps: number of steps of SSC (Spread Spectrum Clock) + * @step_size: step size of each step + */ +struct xpsgtr_ssc { + u32 refclk_rate; + u8 pll_ref_clk; + u32 steps; + u32 step_size; +}; + +/** + * struct xpsgtr_phy - representation of a lane + * @dev: pointer to the xpsgtr_dev instance + * @refclk: reference clock index + * @type: controller which uses this lane + * @lane: lane number + * @protocol: protocol in which the lane operates + */ +struct xpsgtr_phy { + struct xpsgtr_dev *dev; + unsigned int refclk; + u8 type; + u8 lane; + u8 protocol; +}; + +/** + * struct xpsgtr_dev - representation of a ZynMP GT device + * @dev: pointer to device + * @serdes: serdes base address + * @siou: siou base address + * @phys: PHY lanes + * @refclk_sscs: spread spectrum settings for the reference clocks + * @clk: reference clocks + */ +struct xpsgtr_dev { + struct udevice *dev; + u8 *serdes; + u8 *siou; + struct xpsgtr_phy phys[NUM_LANES]; + const struct xpsgtr_ssc *refclk_sscs[NUM_LANES]; + struct clk clk[NUM_LANES]; +}; + +/* Configuration Data */ +/* lookup table to hold all settings needed for a ref clock frequency */ +static const struct xpsgtr_ssc ssc_lookup[] = { + { 19200000, 0x05, 608, 264020 }, + { 20000000, 0x06, 634, 243454 }, + { 24000000, 0x07, 760, 168973 }, + { 26000000, 0x08, 824, 143860 }, + { 27000000, 0x09, 856, 86551 }, + { 38400000, 0x0a, 1218, 65896 }, + { 40000000, 0x0b, 634, 243454 }, + { 52000000, 0x0c, 824, 143860 }, + { 100000000, 0x0d, 1058, 87533 }, + { 108000000, 0x0e, 856, 86551 }, + { 125000000, 0x0f, 992, 119497 }, + { 135000000, 0x10, 1070, 55393 }, + { 150000000, 0x11, 792, 187091 } +}; + +/* I/O Accessors */ +static u32 xpsgtr_read(struct xpsgtr_dev *gtr_dev, u32 reg) +{ + return readl(gtr_dev->serdes + reg); +} + +static void xpsgtr_write(struct xpsgtr_dev *gtr_dev, u32 reg, u32 value) +{ + writel(value, gtr_dev->serdes + reg); +} + +static void xpsgtr_clr_set(struct xpsgtr_dev *gtr_dev, u32 reg, + u32 clr, u32 set) +{ + u32 value = xpsgtr_read(gtr_dev, reg); + + value &= ~clr; + value |= set; + xpsgtr_write(gtr_dev, reg, value); +} + +static u32 xpsgtr_read_phy(struct xpsgtr_phy *gtr_phy, u32 reg) +{ + void __iomem *addr = gtr_phy->dev->serdes + + gtr_phy->lane * PHY_REG_OFFSET + reg; + + return readl(addr); +} + +static void xpsgtr_write_phy(struct xpsgtr_phy *gtr_phy, + u32 reg, u32 value) +{ + void __iomem *addr = gtr_phy->dev->serdes + + gtr_phy->lane * PHY_REG_OFFSET + reg; + + writel(value, addr); +} + +static void xpsgtr_clr_set_phy(struct xpsgtr_phy *gtr_phy, + u32 reg, u32 clr, u32 set) +{ + void __iomem *addr = gtr_phy->dev->serdes + + gtr_phy->lane * PHY_REG_OFFSET + reg; + + writel((readl(addr) & ~clr) | set, addr); +} + +/* Configure PLL and spread-sprectrum clock. */ +static void xpsgtr_configure_pll(struct xpsgtr_phy *gtr_phy) +{ + const struct xpsgtr_ssc *ssc; + u32 step_size; + + ssc = gtr_phy->dev->refclk_sscs[gtr_phy->refclk]; + step_size = ssc->step_size; + + xpsgtr_clr_set(gtr_phy->dev, PLL_REF_SEL(gtr_phy->lane), + PLL_FREQ_MASK, ssc->pll_ref_clk); + + /* Enable lane clock sharing, if required */ + if (gtr_phy->refclk != gtr_phy->lane) { + /* Lane3 Ref Clock Selection Register */ + xpsgtr_clr_set(gtr_phy->dev, L0_Ln_REF_CLK_SEL(gtr_phy->lane), + L0_REF_CLK_SEL_MASK, 1 << gtr_phy->refclk); + } + + /* SSC step size [7:0] */ + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_0_LSB, + STEP_SIZE_0_MASK, step_size & STEP_SIZE_0_MASK); + + /* SSC step size [15:8] */ + step_size >>= STEP_SIZE_SHIFT; + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_1, + STEP_SIZE_1_MASK, step_size & STEP_SIZE_1_MASK); + + /* SSC step size [23:16] */ + step_size >>= STEP_SIZE_SHIFT; + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_2, + STEP_SIZE_2_MASK, step_size & STEP_SIZE_2_MASK); + + /* SSC steps [7:0] */ + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEPS_0_LSB, + STEPS_0_MASK, ssc->steps & STEPS_0_MASK); + + /* SSC steps [10:8] */ + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEPS_1_MSB, + STEPS_1_MASK, + (ssc->steps >> STEP_SIZE_SHIFT) & STEPS_1_MASK); + + /* SSC step size [24:25] */ + step_size >>= STEP_SIZE_SHIFT; + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_3_MSB, + STEP_SIZE_3_MASK, (step_size & STEP_SIZE_3_MASK) | + FORCE_STEP_SIZE | FORCE_STEPS); +} + +/* Configure the lane protocol. */ +static void xpsgtr_lane_set_protocol(struct xpsgtr_phy *gtr_phy) +{ + struct xpsgtr_dev *gtr_dev = gtr_phy->dev; + u8 protocol = gtr_phy->protocol; + + switch (gtr_phy->lane) { + case 0: + xpsgtr_clr_set(gtr_dev, ICM_CFG0, ICM_CFG0_L0_MASK, protocol); + break; + case 1: + xpsgtr_clr_set(gtr_dev, ICM_CFG0, ICM_CFG0_L1_MASK, + protocol << ICM_CFG_SHIFT); + break; + case 2: + xpsgtr_clr_set(gtr_dev, ICM_CFG1, ICM_CFG0_L0_MASK, protocol); + break; + case 3: + xpsgtr_clr_set(gtr_dev, ICM_CFG1, ICM_CFG0_L1_MASK, + protocol << ICM_CFG_SHIFT); + break; + default: + /* We already checked 0 <= lane <= 3 */ + break; + } +} + +/* Bypass (de)scrambler and 8b/10b decoder and encoder. */ +static void xpsgtr_bypass_scrambler_8b10b(struct xpsgtr_phy *gtr_phy) +{ + xpsgtr_write_phy(gtr_phy, L0_TM_DIG_6, L0_TM_DIS_DESCRAMBLE_DECODER); + xpsgtr_write_phy(gtr_phy, L0_TX_DIG_61, L0_TM_DISABLE_SCRAMBLE_ENCODER); +} + +/* SGMII-specific initialization. */ +static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy) +{ + struct xpsgtr_dev *gtr_dev = gtr_phy->dev; + u32 shift = gtr_phy->lane * PROT_BUS_WIDTH_SHIFT; + + /* Set SGMII protocol TX and RX bus width to 10 bits. */ + xpsgtr_clr_set(gtr_dev, TX_PROT_BUS_WIDTH, PROT_BUS_WIDTH_MASK << shift, + PROT_BUS_WIDTH_10 << shift); + + xpsgtr_clr_set(gtr_dev, RX_PROT_BUS_WIDTH, PROT_BUS_WIDTH_MASK << shift, + PROT_BUS_WIDTH_10 << shift); + + xpsgtr_bypass_scrambler_8b10b(gtr_phy); + + /* + * Below code is just temporary solution till we have a way how to + * do it via firmware interface in sync with Linux. Till that happen + * this is the most sensible thing to do here. + */ + /* GEM I/O Clock Control */ + clrsetbits_le32(ZYNQMP_IOU_SLCR_BASEADDR + IOU_SLCR_GEM_CLK_CTRL, + 0xf << shift, + (GEM_CTRL_GEM_SGMII_MODE | GEM_CTRL_GEM_REF_SRC_SEL) << + shift); + + /* Setup signal detect */ + clrsetbits_le32(ZYNQMP_IOU_SLCR_BASEADDR + IOU_SLCR_GEM_CTRL, + PROT_BUS_WIDTH_MASK << shift, + GEM_CTRL_GEM_SGMII_SD << shift); +} + +static int xpsgtr_init(struct phy *x) +{ + struct xpsgtr_dev *gtr_dev = dev_get_priv(x->dev); + struct xpsgtr_phy *gtr_phy; + u32 phy_lane = x->id; + + gtr_phy = >r_dev->phys[phy_lane]; + + /* Enable coarse code saturation limiting logic. */ + xpsgtr_write_phy(gtr_phy, L0_TM_PLL_DIG_37, L0_TM_COARSE_CODE_LIMIT); + + /* + * Configure the PLL, the lane protocol, and perform protocol-specific + * initialization. + */ + xpsgtr_configure_pll(gtr_phy); + xpsgtr_lane_set_protocol(gtr_phy); + + switch (gtr_phy->protocol) { + case ICM_PROTOCOL_SGMII: + xpsgtr_phy_init_sgmii(gtr_phy); + break; + case ICM_PROTOCOL_DP: + case ICM_PROTOCOL_SATA: + return -EINVAL; + } + + dev_dbg(gtr_dev->dev, "lane %u (type %u, protocol %u): init done\n", + gtr_phy->lane, gtr_phy->type, gtr_phy->protocol); + + return 0; +} + +/* Wait for the PLL to lock (with a timeout). */ +static int xpsgtr_wait_pll_lock(struct phy *phy) +{ + struct xpsgtr_dev *gtr_dev = dev_get_priv(phy->dev); + struct xpsgtr_phy *gtr_phy; + u32 phy_lane = phy->id; + int ret = 0; + unsigned int timeout = TIMEOUT_US; + + gtr_phy = >r_dev->phys[phy_lane]; + + dev_dbg(gtr_dev->dev, "Waiting for PLL lock\n"); + + while (1) { + u32 reg = xpsgtr_read_phy(gtr_phy, L0_PLL_STATUS_READ_1); + + if ((reg & PLL_STATUS_LOCKED) == PLL_STATUS_LOCKED) { + ret = 0; + break; + } + + if (--timeout == 0) { + ret = -ETIMEDOUT; + break; + } + + udelay(1); + } + + if (ret == -ETIMEDOUT) + dev_err(gtr_dev->dev, + "lane %u (type %u, protocol %u): PLL lock timeout\n", + gtr_phy->lane, gtr_phy->type, gtr_phy->protocol); + + return ret; +} + +static int xpsgtr_power_on(struct phy *phy) +{ + struct xpsgtr_dev *gtr_dev = dev_get_priv(phy->dev); + struct xpsgtr_phy *gtr_phy; + u32 phy_lane = phy->id; + int ret = 0; + + gtr_phy = >r_dev->phys[phy_lane]; + + /* + * Wait for the PLL to lock. For DP, only wait on DP0 to avoid + * cumulating waits for both lanes. The user is expected to initialize + * lane 0 last. + */ + if (gtr_phy->protocol != ICM_PROTOCOL_DP || + gtr_phy->type == XPSGTR_TYPE_DP_0) + ret = xpsgtr_wait_pll_lock(phy); + + return ret; +} + +/* + * OF Xlate Support + */ + +/* Set the lane type and protocol based on the PHY type and instance number. */ +static int xpsgtr_set_lane_type(struct xpsgtr_phy *gtr_phy, u8 phy_type, + unsigned int phy_instance) +{ + unsigned int num_phy_types; + const int *phy_types; + + switch (phy_type) { + case PHY_TYPE_SATA: { + static const int types[] = { + XPSGTR_TYPE_SATA_0, + XPSGTR_TYPE_SATA_1, + }; + + phy_types = types; + num_phy_types = ARRAY_SIZE(types); + gtr_phy->protocol = ICM_PROTOCOL_SATA; + break; + } + case PHY_TYPE_USB3: { + static const int types[] = { + XPSGTR_TYPE_USB0, + XPSGTR_TYPE_USB1, + }; + + phy_types = types; + num_phy_types = ARRAY_SIZE(types); + gtr_phy->protocol = ICM_PROTOCOL_USB; + break; + } + case PHY_TYPE_DP: { + static const int types[] = { + XPSGTR_TYPE_DP_0, + XPSGTR_TYPE_DP_1, + }; + + phy_types = types; + num_phy_types = ARRAY_SIZE(types); + gtr_phy->protocol = ICM_PROTOCOL_DP; + break; + } + case PHY_TYPE_PCIE: { + static const int types[] = { + XPSGTR_TYPE_PCIE_0, + XPSGTR_TYPE_PCIE_1, + XPSGTR_TYPE_PCIE_2, + XPSGTR_TYPE_PCIE_3, + }; + + phy_types = types; + num_phy_types = ARRAY_SIZE(types); + gtr_phy->protocol = ICM_PROTOCOL_PCIE; + break; + } + case PHY_TYPE_SGMII: { + static const int types[] = { + XPSGTR_TYPE_SGMII0, + XPSGTR_TYPE_SGMII1, + XPSGTR_TYPE_SGMII2, + XPSGTR_TYPE_SGMII3, + }; + + phy_types = types; + num_phy_types = ARRAY_SIZE(types); + gtr_phy->protocol = ICM_PROTOCOL_SGMII; + break; + } + default: + return -EINVAL; + } + + if (phy_instance >= num_phy_types) + return -EINVAL; + + gtr_phy->type = phy_types[phy_instance]; + return 0; +} + +/* + * Valid combinations of controllers and lanes (Interconnect Matrix). + */ +static const unsigned int icm_matrix[NUM_LANES][CONTROLLERS_PER_LANE] = { + { XPSGTR_TYPE_PCIE_0, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0, + XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII0 }, + { XPSGTR_TYPE_PCIE_1, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB0, + XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII1 }, + { XPSGTR_TYPE_PCIE_2, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0, + XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII2 }, + { XPSGTR_TYPE_PCIE_3, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB1, + XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII3 } +}; + +/* Translate OF phandle and args to PHY instance. */ +static int xpsgtr_of_xlate(struct phy *x, + struct ofnode_phandle_args *args) +{ + struct xpsgtr_dev *gtr_dev = dev_get_priv(x->dev); + struct xpsgtr_phy *gtr_phy; + struct udevice *dev = x->dev; + unsigned int phy_instance; + unsigned int phy_lane; + unsigned int phy_type; + unsigned int refclk; + unsigned int i; + int ret; + + if (args->args_count != 4) { + dev_err(dev, "Invalid number of cells in 'phy' property\n"); + return -EINVAL; + } + + /* + * Get the PHY parameters from the OF arguments and derive the lane + * type. + */ + phy_lane = args->args[0]; + if (phy_lane >= NUM_LANES) { + dev_err(dev, "Invalid lane number %u\n", phy_lane); + return -EINVAL; + } + + gtr_phy = >r_dev->phys[phy_lane]; + phy_type = args->args[1]; + phy_instance = args->args[2]; + + ret = xpsgtr_set_lane_type(gtr_phy, phy_type, phy_instance); + if (ret) { + dev_err(dev, "Invalid PHY type and/or instance\n"); + return ret; + } + + refclk = args->args[3]; + if (refclk >= ARRAY_SIZE(gtr_dev->refclk_sscs) || + !gtr_dev->refclk_sscs[refclk]) { + dev_err(dev, "Invalid reference clock number %u\n", refclk); + return -EINVAL; + } + + gtr_phy->refclk = refclk; + + /* This is difference compare to Linux */ + gtr_phy->dev = gtr_dev; + gtr_phy->lane = phy_lane; + + /* + * Ensure that the Interconnect Matrix is obeyed, i.e a given lane type + * is allowed to operate on the lane. + */ + for (i = 0; i < CONTROLLERS_PER_LANE; i++) { + if (icm_matrix[phy_lane][i] == gtr_phy->type) { + x->id = phy_lane; + return 0; + } + } + + return -EINVAL; +} + +/* + * Probe & Platform Driver + */ +static int xpsgtr_get_ref_clocks(struct udevice *dev) +{ + unsigned int refclk; + struct xpsgtr_dev *gtr_dev = dev_get_priv(dev); + int ret; + + for (refclk = 0; refclk < NUM_LANES; ++refclk) { + int i; + u32 rate; + char name[8]; + struct clk *clk = >r_dev->clk[refclk]; + + snprintf(name, sizeof(name), "ref%u", refclk); + dev_dbg(dev, "Checking name: %s\n", name); + ret = clk_get_by_name(dev, name, clk); + if (ret == -ENODATA) { + dev_dbg(dev, "%s clock not specified (err %d)\n", + name, ret); + continue; + } else if (ret) { + dev_dbg(dev, "couldn't get clock %s (err %d)\n", + name, ret); + return ret; + } + + rate = clk_get_rate(clk); + + dev_dbg(dev, "clk rate %d\n", rate); + + ret = clk_enable(clk); + if (ret) { + dev_err(dev, "failed to enable refclk %d clock\n", + refclk); + return ret; + } + + for (i = 0 ; i < ARRAY_SIZE(ssc_lookup); i++) { + if (rate == ssc_lookup[i].refclk_rate) { + gtr_dev->refclk_sscs[refclk] = &ssc_lookup[i]; + dev_dbg(dev, "Found rate %d\n", i); + break; + } + } + + if (i == ARRAY_SIZE(ssc_lookup)) { + dev_err(dev, + "Invalid rate %u for reference clock %u\n", + rate, refclk); + return -EINVAL; + } + } + + return 0; +} + +static int xpsgtr_probe(struct udevice *dev) +{ + struct xpsgtr_dev *gtr_dev = dev_get_priv(dev); + + gtr_dev->serdes = dev_remap_addr_name(dev, "serdes"); + if (!gtr_dev->serdes) + return -EINVAL; + + gtr_dev->siou = dev_remap_addr_name(dev, "siou"); + if (!gtr_dev->siou) + return -EINVAL; + + gtr_dev->dev = dev; + + return xpsgtr_get_ref_clocks(dev); +} + +static const struct udevice_id xpsgtr_phy_ids[] = { + { .compatible = "xlnx,zynqmp-psgtr-v1.1", }, + { } +}; + +static const struct phy_ops xpsgtr_phy_ops = { + .init = xpsgtr_init, + .of_xlate = xpsgtr_of_xlate, + .power_on = xpsgtr_power_on, +}; + +U_BOOT_DRIVER(psgtr_phy) = { + .name = "psgtr_phy", + .id = UCLASS_PHY, + .of_match = xpsgtr_phy_ids, + .ops = &xpsgtr_phy_ops, + .probe = xpsgtr_probe, + .priv_auto = sizeof(struct xpsgtr_dev), +}; diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 2f49f594a44..fd999368ab7 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -272,6 +272,7 @@ static const struct udevice_id zynq_serial_ids[] = { { .compatible = "xlnx,xuartps" }, { .compatible = "cdns,uart-r1p8" }, { .compatible = "cdns,uart-r1p12" }, + { .compatible = "xlnx,zynqmp-uart" }, { } }; diff --git a/drivers/sysreset/sysreset_microblaze.c b/drivers/sysreset/sysreset_microblaze.c index 514c95817f2..83a7f77ac41 100644 --- a/drivers/sysreset/sysreset_microblaze.c +++ b/drivers/sysreset/sysreset_microblaze.c @@ -8,13 +8,15 @@ #include <errno.h> #include <sysreset.h> #include <linux/err.h> +#include <linux/stringify.h> static int microblaze_sysreset_request(struct udevice *dev, enum sysreset_t type) { puts("Microblaze soft reset sysreset\n"); - __asm__ __volatile__ (" mts rmsr, r0;" \ - "bra r0"); + __asm__ __volatile__ ( + "mts rmsr, r0;" \ + "brai " __stringify(CONFIG_XILINX_MICROBLAZE0_VECTOR_BASE_ADDR)); return -EINPROGRESS; } diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index e7882fb6078..28f67e30d5d 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -21,9 +21,6 @@ # define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -/* setting reset address */ -/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/ - /* Stack location before relocation */ #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_F_LEN) @@ -57,8 +54,6 @@ #define CONFIG_HOSTNAME "microblaze-generic" /* architecture dependent code */ -#define CONFIG_SYS_USR_EXCEP /* user exception */ - #if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP) #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na) #else diff --git a/include/dt-bindings/power/xlnx-versal-power.h b/include/dt-bindings/power/xlnx-versal-power.h index 1b75175edce..4a727754ad0 100644 --- a/include/dt-bindings/power/xlnx-versal-power.h +++ b/include/dt-bindings/power/xlnx-versal-power.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * Copyright (C) 2019 - 2020 Xilinx, Inc. + * Copyright (C) 2019 - 2021 Xilinx, Inc. */ #ifndef _DT_BINDINGS_VERSAL_POWER_H @@ -26,6 +26,7 @@ #define PM_DEV_OSPI (0x1822402aU) #define PM_DEV_QSPI (0x1822402bU) #define PM_DEV_GPIO_PMC (0x1822402cU) +#define PM_DEV_I2C_PMC (0x1822402dU) #define PM_DEV_SDIO_0 (0x1822402eU) #define PM_DEV_SDIO_1 (0x1822402fU) #define PM_DEV_RTC (0x18224034U) diff --git a/net/Kconfig b/net/Kconfig index 7a2d1450188..cabe93c6bd2 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -27,10 +27,11 @@ config BOOTP_SEND_HOSTNAME config NET_RANDOM_ETHADDR bool "Random ethaddr if unset" help - Selecting this will allow the Ethernet interface to function - even when the ethaddr variable for that interface is unset. - A new MAC address will be generated on every boot and it will - not be added to the environment. + Selecting this will allow the Ethernet interface to function even + when the ethaddr variable for that interface is unset. In this case, + a random MAC address in the locally administered address space is + generated. It will be saved to the appropriate environment variable, + too. config NETCONSOLE bool "NetConsole support" diff --git a/net/eth-uclass.c b/net/eth-uclass.c index 0da0e85be03..58c308f3327 100644 --- a/net/eth-uclass.c +++ b/net/eth-uclass.c @@ -583,6 +583,8 @@ static int eth_post_probe(struct udevice *dev) net_random_ethaddr(pdata->enetaddr); printf("\nWarning: %s (eth%d) using random MAC address - %pM\n", dev->name, dev_seq(dev), pdata->enetaddr); + eth_env_set_enetaddr_by_index("eth", dev_seq(dev), + pdata->enetaddr); #else printf("\nError: %s address not set.\n", dev->name); diff --git a/net/eth_legacy.c b/net/eth_legacy.c index f383ccce0b9..0b282d918be 100644 --- a/net/eth_legacy.c +++ b/net/eth_legacy.c @@ -164,6 +164,8 @@ int eth_write_hwaddr(struct eth_device *dev, const char *base_name, net_random_ethaddr(dev->enetaddr); printf("\nWarning: %s (eth%d) using random MAC address - %pM\n", dev->name, eth_number, dev->enetaddr); + eth_env_set_enetaddr_by_index("eth", eth_number, + dev->enetaddr); #else printf("\nError: %s address not set.\n", dev->name); diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 79f03d16362..f67f6eb6af9 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2015,7 +2015,6 @@ CONFIG_SYS_USE_MMC CONFIG_SYS_USE_NAND CONFIG_SYS_USE_NANDFLASH CONFIG_SYS_USE_NORFLASH -CONFIG_SYS_USR_EXCEP CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT |