diff options
-rw-r--r-- | arch/arm/dts/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/dts/imx28-evk-u-boot.dtsi | 10 | ||||
-rw-r--r-- | board/freescale/mx28evk/MAINTAINERS | 1 | ||||
-rw-r--r-- | board/freescale/mx28evk/mx28evk.c | 77 | ||||
-rw-r--r-- | configs/mx28evk_defconfig | 18 | ||||
-rw-r--r-- | include/configs/mx28evk.h | 7 |
6 files changed, 26 insertions, 88 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index bec349f17e4..e62f7fc1c5a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -680,6 +680,7 @@ dtb-$(CONFIG_TARGET_MX23_OLINUXINO) += \ imx23-olinuxino.dtb dtb-$(CONFIG_MX28) += \ + imx28-evk.dtb \ imx28-xea.dtb dtb-$(CONFIG_MX51) += \ diff --git a/arch/arm/dts/imx28-evk-u-boot.dtsi b/arch/arm/dts/imx28-evk-u-boot.dtsi new file mode 100644 index 00000000000..6adbae68d2f --- /dev/null +++ b/arch/arm/dts/imx28-evk-u-boot.dtsi @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + * + * SPDX-License-Identifier: GPL-2.0+ or X11 + */ + +#include "imx28-u-boot.dtsi" + diff --git a/board/freescale/mx28evk/MAINTAINERS b/board/freescale/mx28evk/MAINTAINERS index 597118d3f66..c565010ccf6 100644 --- a/board/freescale/mx28evk/MAINTAINERS +++ b/board/freescale/mx28evk/MAINTAINERS @@ -2,6 +2,7 @@ MX28EVK BOARD M: Fabio Estevam <festevam@gmail.com> S: Maintained F: board/freescale/mx28evk/ +F: arch/arm/dts/imx28-evk.dts F: include/configs/mx28evk.h F: configs/mx28evk_defconfig F: configs/mx28evk_auart_console_defconfig diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c index 21c9cb11283..88c3bf36089 100644 --- a/board/freescale/mx28evk/mx28evk.c +++ b/board/freescale/mx28evk/mx28evk.c @@ -72,80 +72,3 @@ int board_init(void) return 0; } - -#ifdef CONFIG_CMD_MMC -static int mx28evk_mmc_wp(int id) -{ - if (id != 0) { - printf("MXS MMC: Invalid card selected (card id = %d)\n", id); - return 1; - } - - return gpio_get_value(MX28_PAD_SSP1_SCK__GPIO_2_12); -} - -int board_mmc_init(struct bd_info *bis) -{ - /* Configure WP as input */ - gpio_direction_input(MX28_PAD_SSP1_SCK__GPIO_2_12); - - /* Configure MMC0 Power Enable */ - gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0); - - return mxsmmc_initialize(bis, 0, mx28evk_mmc_wp, NULL); -} -#endif - -#ifdef CONFIG_CMD_NET - -int board_eth_init(struct bd_info *bis) -{ - struct mxs_clkctrl_regs *clkctrl_regs = - (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; - struct eth_device *dev; - int ret; - - ret = cpu_eth_init(bis); - if (ret) - return ret; - - /* MX28EVK uses ENET_CLK PAD to drive FEC clock */ - writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN, - &clkctrl_regs->hw_clkctrl_enet); - - /* Power-on FECs */ - gpio_direction_output(MX28_PAD_SSP1_DATA3__GPIO_2_15, 0); - - /* Reset FEC PHYs */ - gpio_direction_output(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 0); - udelay(200); - gpio_set_value(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 1); - - ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE); - if (ret) { - puts("FEC MXS: Unable to init FEC0\n"); - return ret; - } - - ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE); - if (ret) { - puts("FEC MXS: Unable to init FEC1\n"); - return ret; - } - - dev = eth_get_dev_by_name("FEC0"); - if (!dev) { - puts("FEC MXS: Unable to get FEC0 device entry\n"); - return -EINVAL; - } - - dev = eth_get_dev_by_name("FEC1"); - if (!dev) { - puts("FEC MXS: Unable to get FEC1 device entry\n"); - return -EINVAL; - } - - return ret; -} - -#endif diff --git a/configs/mx28evk_defconfig b/configs/mx28evk_defconfig index 300ab08c82c..3345ec611a1 100644 --- a/configs/mx28evk_defconfig +++ b/configs/mx28evk_defconfig @@ -7,10 +7,12 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_OFFSET=0x40000 +CONFIG_DM_GPIO=y CONFIG_SPL_TEXT_BASE=0x00001000 CONFIG_TARGET_MX28EVK=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y +CONFIG_DEFAULT_DEVICE_TREE="imx28-evk" CONFIG_FIT=y CONFIG_SYS_CONSOLE_IS_IN_ENV=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -18,13 +20,11 @@ CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_FRAMEWORK is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y CONFIG_CMD_NAND_TRIMFFS=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT4=y @@ -35,18 +35,28 @@ CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(bootloader)ro,512k(environment),512k(redundant-environment),4m(kernel),512k(fdt),8m(ramdisk),-(filesystem)" CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_VERSION_VARIABLE=y +# CONFIG_NET is not set +CONFIG_DM=y +CONFIG_SPL_DM=y CONFIG_MXS_GPIO=y +CONFIG_DM_MMC=y CONFIG_MMC_MXS=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_MXS=y CONFIG_MII=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MXS=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_CONS_INDEX=0 CONFIG_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_SPLASH_SCREEN=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index a65df486081..21f3277d5c4 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -31,13 +31,6 @@ /* UBI and NAND partitioning */ -/* FEC Ethernet on SoC */ -#ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_MDIO_BASE MXS_ENET0_BASE -#define CONFIG_MX28_FEC_MAC_IN_OCOTP -#endif - /* RTC */ #ifdef CONFIG_CMD_DATE #define CONFIG_RTC_MXS |