diff options
-rw-r--r-- | arch/arm/Kconfig | 10 | ||||
-rw-r--r-- | arch/arm/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/Kconfig | 41 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/Makefile | 13 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/board-spl.c | 287 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/board.c | 46 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/common.c | 28 | ||||
-rw-r--r-- | arch/arm/mach-rockchip/rk3288/Kconfig | 6 |
8 files changed, 432 insertions, 0 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cd88df443ab..194fb7bd8bc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -829,6 +829,14 @@ config TARGET_STM32F429_DISCOVERY bool "Support STM32F429 Discovery" select CPU_V7M +config ARCH_ROCKCHIP + bool "Support Rockchip SoCs" + select SUPPORT_SPL + select SPL + select OF_CONTROL + select CPU_V7 + select DM + endchoice source "arch/arm/mach-at91/Kconfig" @@ -863,6 +871,8 @@ source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/cpu/armv7/rmobile/Kconfig" +source "arch/arm/mach-rockchip/Kconfig" + source "arch/arm/cpu/armv7/s5pc1xx/Kconfig" source "arch/arm/mach-socfpga/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e84d6d366e1..1eca815c08b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -55,6 +55,7 @@ machine-$(CONFIG_ARCH_NOMADIK) += nomadik # TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X machine-$(CONFIG_ORION5X) += orion5x machine-$(CONFIG_ARCH_SOCFPGA) += socfpga +machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_TEGRA) += tegra machine-$(CONFIG_ARCH_UNIPHIER) += uniphier machine-$(CONFIG_ARCH_VERSATILE) += versatile diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig new file mode 100644 index 00000000000..ab50f4e1f8a --- /dev/null +++ b/arch/arm/mach-rockchip/Kconfig @@ -0,0 +1,41 @@ +if ARCH_ROCKCHIP + +config ROCKCHIP_RK3288 + bool "Support Rockchip RK3288" + help + The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17 + including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two + video interfaces supporting HDMI and eDP, several DDR3 options + and video codec support. Peripherals include Gigabit Ethernet, + USB2 host and OTG, SDIO, I2S, UART,s, SPI, I2C and PWMs. + +config SYS_MALLOC_F + default y + +config SYS_MALLOC_F_LEN + default 0x800 + +config SPL_DM + default y + +config DM_SERIAL + default y + +config DM_SPI + default y + +config DM_SPI_FLASH + default y + +config DM_I2C + default y + +config DM_GPIO + default y + +config ROCKCHIP_SERIAL + default y + +source "arch/arm/mach-rockchip/rk3288/Kconfig" + +endif diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile new file mode 100644 index 00000000000..5a4e383a91c --- /dev/null +++ b/arch/arm/mach-rockchip/Makefile @@ -0,0 +1,13 @@ +# +# Copyright (c) 2014 Google, Inc +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-y += board-spl.o +else +obj-y += board.o +endif +obj-y += common.o +obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/ diff --git a/arch/arm/mach-rockchip/board-spl.c b/arch/arm/mach-rockchip/board-spl.c new file mode 100644 index 00000000000..a241d965b91 --- /dev/null +++ b/arch/arm/mach-rockchip/board-spl.c @@ -0,0 +1,287 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <debug_uart.h> +#include <dm.h> +#include <fdtdec.h> +#include <led.h> +#include <malloc.h> +#include <ram.h> +#include <spl.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/arch/periph.h> +#include <asm/arch/sdram.h> +#include <dm/pinctrl.h> +#include <dm/root.h> +#include <dm/test.h> +#include <dm/util.h> +#include <power/regulator.h> + +DECLARE_GLOBAL_DATA_PTR; + +u32 spl_boot_device(void) +{ + const void *blob = gd->fdt_blob; + struct udevice *dev; + const char *bootdev; + int node; + int ret; + + bootdev = fdtdec_get_config_string(blob, "u-boot,boot0"); + debug("Boot device %s\n", bootdev); + if (!bootdev) + goto fallback; + + node = fdt_path_offset(blob, bootdev); + if (node < 0) { + debug("node=%d\n", node); + goto fallback; + } + ret = device_get_global_by_of_offset(node, &dev); + if (ret) { + debug("device at node %s/%d not found: %d\n", bootdev, node, + ret); + goto fallback; + } + debug("Found device %s\n", dev->name); + switch (device_get_uclass_id(dev)) { + case UCLASS_SPI_FLASH: + return BOOT_DEVICE_SPI; + case UCLASS_MMC: + return BOOT_DEVICE_MMC1; + default: + debug("Booting from device uclass '%s' not supported\n", + dev_get_uclass_name(dev)); + } + +fallback: + return BOOT_DEVICE_MMC1; +} + +u32 spl_boot_mode(void) +{ + return MMCSD_MODE_RAW; +} + +/* read L2 control register (L2CTLR) */ +static inline uint32_t read_l2ctlr(void) +{ + uint32_t val = 0; + + asm volatile ("mrc p15, 1, %0, c9, c0, 2" : "=r" (val)); + + return val; +} + +/* write L2 control register (L2CTLR) */ +static inline void write_l2ctlr(uint32_t val) +{ + /* + * Note: L2CTLR can only be written when the L2 memory system + * is idle, ie before the MMU is enabled. + */ + asm volatile("mcr p15, 1, %0, c9, c0, 2" : : "r" (val) : "memory"); + isb(); +} + +static void configure_l2ctlr(void) +{ + uint32_t l2ctlr; + + l2ctlr = read_l2ctlr(); + l2ctlr &= 0xfffc0000; /* clear bit0~bit17 */ + + /* + * Data RAM write latency: 2 cycles + * Data RAM read latency: 2 cycles + * Data RAM setup latency: 1 cycle + * Tag RAM write latency: 1 cycle + * Tag RAM read latency: 1 cycle + * Tag RAM setup latency: 1 cycle + */ + l2ctlr |= (1 << 3 | 1 << 0); + write_l2ctlr(l2ctlr); +} + +struct rk3288_timer { + u32 timer_load_count0; + u32 timer_load_count1; + u32 timer_curr_value0; + u32 timer_curr_value1; + u32 timer_ctrl_reg; + u32 timer_int_status; +}; + +void init_timer(void) +{ + struct rk3288_timer * const timer7_ptr = (void *)TIMER7_BASE; + + writel(0xffffffff, &timer7_ptr->timer_load_count0); + writel(0xffffffff, &timer7_ptr->timer_load_count1); + writel(1, &timer7_ptr->timer_ctrl_reg); +} + +static int configure_emmc(struct udevice *pinctrl) +{ + struct gpio_desc desc; + int ret; + + pinctrl_request_noflags(pinctrl, PERIPH_ID_EMMC); + + /* + * TODO(sjg@chromium.org): Pick this up from device tree or perhaps + * use the EMMC_PWREN setting. + */ + ret = dm_gpio_lookup_name("D9", &desc); + if (ret) { + debug("gpio ret=%d\n", ret); + return ret; + } + ret = dm_gpio_request(&desc, "emmc_pwren"); + if (ret) { + debug("gpio_request ret=%d\n", ret); + return ret; + } + ret = dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT); + if (ret) { + debug("gpio dir ret=%d\n", ret); + return ret; + } + ret = dm_gpio_set_value(&desc, 1); + if (ret) { + debug("gpio value ret=%d\n", ret); + return ret; + } + + return 0; +} + +void board_init_f(ulong dummy) +{ + struct udevice *pinctrl; + struct udevice *dev; + int ret; + + /* Example code showing how to enable the debug UART on RK3288 */ +#ifdef EARLY_UART +#include <asm/arch/grf_rk3288.h> + /* Enable early UART on the RK3288 */ +#define GRF_BASE 0xff770000 + struct rk3288_grf * const grf = (void *)GRF_BASE; + + rk_clrsetreg(&grf->gpio7ch_iomux, GPIO7C7_MASK << GPIO7C7_SHIFT | + GPIO7C6_MASK << GPIO7C6_SHIFT, + GPIO7C7_UART2DBG_SOUT << GPIO7C7_SHIFT | + GPIO7C6_UART2DBG_SIN << GPIO7C6_SHIFT); + /* + * Debug UART can be used from here if required: + * + * debug_uart_init(); + * printch('a'); + * printhex8(0x1234); + * printascii("string"); + */ + debug_uart_init(); +#endif + + ret = spl_init(); + if (ret) { + debug("spl_init() failed: %d\n", ret); + hang(); + } + + init_timer(); + configure_l2ctlr(); + + ret = uclass_get_device(UCLASS_CLK, 0, &dev); + if (ret) { + debug("CLK init failed: %d\n", ret); + return; + } + + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); + if (ret) { + debug("Pinctrl init failed: %d\n", ret); + return; + } + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return; + } +} + +static int setup_led(void) +{ +#ifdef CONFIG_SPL_LED + struct udevice *dev; + char *led_name; + int ret; + + led_name = fdtdec_get_config_string(gd->fdt_blob, "u-boot,boot-led"); + if (!led_name) + return 0; + ret = led_get_by_label(led_name, &dev); + if (ret) { + debug("%s: get=%d\n", __func__, ret); + return ret; + } + ret = led_set_on(dev, 1); + if (ret) + return ret; +#endif + + return 0; +} + +void spl_board_init(void) +{ + struct udevice *pinctrl; + int ret; + + ret = setup_led(); + + if (ret) { + debug("LED ret=%d\n", ret); + hang(); + } + + ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); + if (ret) { + debug("%s: Cannot find pinctrl device\n", __func__); + goto err; + } + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_SDCARD); + if (ret) { + debug("%s: Failed to set up SD card\n", __func__); + goto err; + } + ret = configure_emmc(pinctrl); + if (ret) { + debug("%s: Failed to set up eMMC\n", __func__); + goto err; + } + + /* Enable debug UART */ + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_UART_DBG); + if (ret) { + debug("%s: Failed to set up console UART\n", __func__); + goto err; + } + + preloader_console_init(); + return; +err: + printf("spl_board_init: Error %d\n", ret); + + /* No way to report error here */ + hang(); +} diff --git a/arch/arm/mach-rockchip/board.c b/arch/arm/mach-rockchip/board.c new file mode 100644 index 00000000000..688bc0ffded --- /dev/null +++ b/arch/arm/mach-rockchip/board.c @@ -0,0 +1,46 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <ram.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ + struct ram_info ram; + struct udevice *dev; + int ret; + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return ret; + } + ret = ram_get_info(dev, &ram); + if (ret) { + debug("Cannot get DRAM size: %d\n", ret); + return ret; + } + debug("SDRAM base=%lx, size=%x\n", ram.base, ram.size); + gd->ram_size = ram.size; + + return 0; +} + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/mach-rockchip/common.c b/arch/arm/mach-rockchip/common.c new file mode 100644 index 00000000000..fc7ac726cc8 --- /dev/null +++ b/arch/arm/mach-rockchip/common.c @@ -0,0 +1,28 @@ +/* + * (C) Copyright 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <linux/err.h> + +void *rockchip_get_cru(void) +{ + struct udevice *dev; + fdt_addr_t addr; + int ret; + + ret = uclass_get_device(UCLASS_CLK, 0, &dev); + if (ret) + return ERR_PTR(ret); + + addr = dev_get_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return ERR_PTR(-EINVAL); + + return (void *)addr; +} diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig new file mode 100644 index 00000000000..26d5951543e --- /dev/null +++ b/arch/arm/mach-rockchip/rk3288/Kconfig @@ -0,0 +1,6 @@ +if ROCKCHIP_RK3288 + +config SYS_SOC + default "rockchip" + +endif |